| Age | Commit message (Collapse) | Author |
|---|
|
Add toggle_utf8() and toggle_utf8_sysfs() and use them in place of old
enable/disable functions. toggle_utf8() also adds iutf8 setting and is
set up to be called per-console (in subsequent patches).
Note, that old disable_utf8() didn't bother checking if it was ok
to change the kbdmode.
|
|
We copy only to allocated consoles, so the cost of looping over
all possible ones is minuscule.
|
|
GIO_SCRNMAP / GIO_UNISCRNMAP are related to what setfont does with -m
option - namely setting intermediate map from 8bit values into unicode
values. This map is global, so single setfont invocation sets it for
all applicable consoles.
Furthermore calling GIO_SCRNMAP before GIO_UNISCRNMAP causes issues as
the former corrupts values > 255 (UNI alone would be sufficient).
The bug can be easily tested with the following conf:
KEYMAP=pl
FONT=LatArCyrHeb-16
FONT_MAP=8859-2
|
|
https://github.com/systemd/systemd/pull/3685 introduced
/run/systemd/inaccessible/{chr,blk} to map inacessible devices,
this patch allows systemd running inside a nspawn container to create
/run/systemd/inaccessible/{chr,blk}.
|
|
|
|
bootctl: Always use upper case for "/EFI/BOOT" and "/EFI/BOOT/BOOT*.EFI".
|
|
|
|
If the ESP is not mounted with "iocharset=ascii", but with "iocharset=utf8"
(which is for example the default in Debian), the file system becomes case
sensitive. This means that a file created as "FooBarBaz" cannot be accessed as
"foobarbaz" since those are then considered different files.
Moreover, a file created as "FooBar" can then also not be accessed as "foobar",
and it also prevents such a file from being created, as both would use the same
8.3 short name "FOOBAR".
Even though the UEFI specification [0] does give the canonical spelling for
the files mentioned above, not all implementations completely conform to that,
so it's possible that those files would already exist, but with a different
spelling, causing subtle bugs when scanning or modifying the ESP.
While the proper fix would of course be that everybody conformed to the
standard, we can work around this problem by just referencing the files by
their 8.3 short names, i.e. using upper case.
Fixes: #3740
[0] <http://www.uefi.org/specifications>, version 2.6, section 3.5.1.1
|
|
|
|
Fix bug introduced by #3263: mount(2) return value is 0 or -1, not errno.
Thanks to Evgeny Vereshchagin (@evverx) for reporting.
|
|
We generally try to avoid strerror(), due to its threads-unsafety, let's do
this here, too.
Also, let's be tiny bit more explanatory with the log messages, and let's
shorten a few things.
|
|
We usually hide legacy bus properties from introspection. Let's do that for the
InaccessibleDirectories= properties too.
The properties stay accessible if requested, but they won't be listed anymore
if people introspect the unit.
|
|
namespace: unify limit behavior on non-directory paths
|
|
Let's make sure our logging APIs is in sync with how stdout/stderr logging
works.
|
|
This patch renames Read{Write,Only}Directories= and InaccessibleDirectories=
to Read{Write,Only}Paths= and InaccessiblePaths=, previous names are kept
as aliases but they are not advertised in the documentation.
Renamed variables:
`read_write_dirs` --> `read_write_paths`
`read_only_dirs` --> `read_only_paths`
`inaccessible_dirs` --> `inaccessible_paths`
|
|
Despite the name, `Read{Write,Only}Directories=` already allows for
regular file paths to be masked. This commit adds the same behavior
to `InaccessibleDirectories=` and makes it explicit in the doc.
This patch introduces `/run/systemd/inaccessible/{reg,dir,chr,blk,fifo,sock}`
{dile,device}nodes and mounts on the appropriate one the paths specified
in `InacessibleDirectories=`.
Based on Luca's patch from https://github.com/systemd/systemd/pull/3327
|
|
json output
With this change, binary record data is formatted as string if --all is
specified when using json output. This is inline with the effect of --all on
the other available output modes.
Fixes: #3416
|
|
When converting log messages from human readable text into binary records to
send off to journald in sd_journal_print(), strip trailing whitespace in the
log message. This way, handling of logs made via syslog(), stdout/stderr and
sd_journal_print() are treated the same way: trailing (but not leading)
whitespace is automatically removed, in particular \n and \r. Note that in case
of syslog() and stdout/stderr based logging the stripping takes place
server-side though, while for the native protocol based transport this takes
place client-side. This is because in the former cases conversion from
free-form human-readable strings into structured, binary log records takes
place on the server-side while for journal-native logging it happens on the
client side, and after conversion into binary records we probably shouldn't
alter the data anymore.
See: #3416
|
|
install everything in /boot/efi, if this is a mountpoint
|
|
|
|
|
|
|
|
|
|
WaitForKeyEx may never return on some UEFI systems depending
on firmware, hardware configuration and the phase of the moon.
Use ConIn->WaitForKey unconditionally instead.
Fixes #3632
|
|
Such mkdir errors happen for example when trying to mkdir /sys/fs/selinux.
/sys is documented to be readonly in the container, so mkdir errors below /sys
can be expected.
They shouldn't be logged as warnings since they lead users to think that
there is something wrong.
|
|
Fix make nulstr confusion
|
|
Trivial fixes
|
|
|
|
|
|
Usually multiple DNS servers are configured, and it looks strange to have
singular in the heading.
|
|
strv_make_nulstr was creating a nulstr which was not a valid nulstr,
because it was missing the terminating NUL. This didn't cause any issues,
because strv_parse_nulstr correctly parsed the result, using the
separately specified length.
But it's confusing to have something called nulstr which really isn't.
It is likely that somebody will try to use strv_make_nulstr() in
some other place, incorrectly.
This patch changes strv_parse_nulstr() to produce a valid nulstr, and
changes the output length parameter to be the minimum number of bytes
which can be later on parsed by strv_parse_nulstr(). This allows the
only user in ask-password-api to be slightly simplified.
Based-on-patch-by: Jean-Sébastien Bour <jean-sebastien@bour.name>
Fixes #3689.
|
|
(systemd/systemd#3689)
|
|
(#3738)
During stop when service has one "regular" pid one main pid and one
control pid and the sighld for the regular one is processed first the
unit_tidy_watch_pids will skip the main and control pid and does not
remove them from u->pids(). But then we skip the sigchld event because we
already did one in the iteration and there are two pids in u->pids.
v2: Use general unit_main_pid() and unit_control_pid() instead of
reaching directly to service structure.
|
|
We should look that the kind is invalid rather than pointer is NULL.
|
|
https://github.com/SELinuxProject/selinux/commit/9eb9c9327563014ad6a807814e7975424642d5b9
deprecated selinux_context_t. Replace with a simple char* everywhere.
Alternative fix for #3719.
|
|
Callers of the 'udev monitor' tool expect to see output when
an event occurs. The stdio buffering defeats that. This patch
switches it to line buffering.
|
|
... as requested in
https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/message/DJ7HDNRM5JGBSA4HL3UWW5ZGLQDJ6Y7M/.
Adding the macro makes it marginally easier to create generators
for outside projects.
I opted for "generatordir" and "usergeneratordir" to match
%unitdir and %userunitdir. OTOH, "_systemd" prefix makes it obvious
that this is related to systemd. "%_generatordir" would be to generic
of a name.
|
|
Do not allocate objects of dynamic and potentially large size on the stack
to avoid both clang compilation errors and unpredictable runtime behavior
on exotic platforms. Use the heap for that instead.
While at it, refactor the code a bit. Access 's->domain' via
NDISC_DNSSL_DOMAIN(), and refrain from allocating 'x' independently, but
rather reuse 's' if we're dealing with a new entry to the set.
Fixes #3717
|
|
journald-related shutdown fixes for slow I/O
|
|
(#3724)
Signed-off-by: Andreas Pokorny <andreas.pokorny@canonical.com>
|
|
|
|
This way, slow IO journald has to wait for can't cause it to reach the killing
spree timeout and is hit by SIGKILL in addition to SIGTERM.
|
|
There's really no reason to use 10s here, let's instead default to 90s like we
do for everything else.
The SIGKILL during the final killing spree is in most regards the fourth level
of a safety net, after all: any normal service should have already been stopped
during the normal service shutdown logic, first via SIGTERM and then SIGKILL,
and then also via SIGTERM during the finall killing spree before we send
SIGKILL. And as a fourth level safety net it should only be required in
exceptional cases, which means it's safe to rais the default timeout, as normal
shutdowns should never be delayed by it.
Note that journald excludes itself from the normal service shutdown, and relies
on the final killing spree to terminate it (this is because it wants to cover
the normal shutdown phase's complete logging). If the system's IO is
excessively slow, then the 10s might not be enough for journald to sync
everything to disk and logs might get lost during shutdown.
|
|
|
|
seccomp_syscall_resolve_name() can return a mix of positive and negative
(pseudo-) syscall numbers, while errors are signaled via __NR_SCMP_ERROR.
This commit lets the syscall filter parser only abort on real parsing
failures, letting libseccomp handle pseudo-syscall number on its own
and allowing proper multiplexed syscalls filtering.
|
|
|
|
This is basically the same change as ea68351.
|
|
Follow up on #3503 (pass service env vars to PAM sessions)
|
|
Prevent free from being called on (a part of) the call-by-reference
variable env when setup_pam fails.
|
|
The unit load queue can be processed in the middle of setting the
unit's properties, so its load_state would no longer be UNIT_STUB
for the check in bus_unit_set_properties(), which would cause it to
incorrectly return an error.
|
