| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Phenomenon: parameters configured in /etc/fstab for swap units are
ignored. E.g. pri= settings have no effect when systemd starts swap
units. What is even more confusing, .swap units for the name used in
/etc/fstab initially show proper values for Priority=, but after
starting them, they are re-initalized from /proc/swaps and show the -1
value from /proc/swaps.
Change swap units to follow the original configured unit. This way
proper settings are used when starting the swap.
|
|
Previous code would only return correct results when discard
was the last option.
While at it, avoid incorrect behaviour for (invalid) 'pri' option
not followed by '=...', and also do not return -1 as the error code.
|
|
Process possible "discard" values from /etc/fstab.
|
|
In the conversion to sd-event loop, handling of normal files got
broken. We do not want to perform non-blocking reads on them, but
simply do read() in a loop. Install a statically-enabled "source"
to do that.
|
|
They are not legal in the export format.
|
|
The kdbus limit is 2M and we removed the bus-owner override. Therefore,
use at most 2M as message size.
|
|
Allow sysview users to retrieve the seat that a session is assigned to.
|
|
|
|
Add helper to perform session switches on a specific seat whenever we
retrieve a VT-switch keyboard event.
|
|
Move the +1 calculus onto the definition of the variable, just to make
the code a little easier to read. No functional change.
|
|
Cpu's are assigned normally, so starting at 0, so the MAX_CPU index will
always be one smaller than the actual number.
Found with Coverity.
|
|
Check if strjoin worked and also use _cleanup_free_ since we are
here.
Found with Coverity. Fixes CID#1241962
|
|
Found by coverity. Fixes: CID#996314 and #996312
|
|
Found by coverity. Fixes: CID#996409
|
|
This PMIC is found on TI AM335x based boards like the beaglebone and
beaglebone black.
root@beaglebone-white:~# udevadm info -a /dev/input/event0
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device
'/devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0/event0':
KERNEL=="event0"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device
'/devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0':
KERNELS=="input0"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="tps65217_pwr_but"
ATTRS{phys}==""
ATTRS{uniq}==""
ATTRS{properties}=="0"
looking at parent device '/devices/ocp.3/44e0b000.i2c/i2c-0/0-0024':
KERNELS=="0-0024"
SUBSYSTEMS=="i2c"
DRIVERS=="tps65217"
ATTRS{name}=="tps65217"
looking at parent device '/devices/ocp.3/44e0b000.i2c/i2c-0':
KERNELS=="i2c-0"
SUBSYSTEMS=="i2c"
DRIVERS==""
ATTRS{name}=="OMAP I2C adapter"
looking at parent device '/devices/ocp.3/44e0b000.i2c':
KERNELS=="44e0b000.i2c"
SUBSYSTEMS=="platform"
DRIVERS=="omap_i2c"
looking at parent device '/devices/ocp.3':
KERNELS=="ocp.3"
SUBSYSTEMS=="platform"
DRIVERS==""
|
|
No functional change. We just don't assign the value twice.
Found by coverity. Fixes: CID#1237616 and #1237617
|
|
'make distcheck' calls test-bus-policy outside of the source tree, so it
must consider the TEST_DIR variable to access its files.
|
|
If one has a config like:
d /tmp 1777 root root -
X /tmp/important_mount
All files below /tmp/important_mount will be deleted as the
/tmp/important_mount item will spuriously inherit a max age of 0
from /tmp.
/tmp has a max age of 0 but age_set is (of course) false.
This affects also the PrivateTmp feature of systemd.
All tmp files of such services will be deleted unconditionally
and can cause service failures and data loss.
Fix this by checking ->age_set in the IGNORE_DIRECTORY_PATH logic.
|
|
This adds --disable-utmp option to configure. If it is used, all
utmp-related functionality, including querying runlevel support,
is removed.
|
|
|
|
After recent changes the number was always reported as 0, because
the accounting was done server_destroy(), called after the message was
already printed. But even before this change, the counts were wrong
because seqnum start at 0 only for newly created journal files, so when
appending to existing files, the calculated count was wrong anyway.
Also do some variable renaming for consistency and disable some low-level
debug messages.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=83682
[zj: move the initalization even earlier, before any sockets are
looked at.]
|
|
Most of these failures would anyway get caught later on, but now the error messages are a bit more
specific.
|
|
Found by Coverity. Fixes CID #1237541.
|
|
|
|
|
|
We replace the idiom "X && !(*foo = 0)" with "X && ((*foo = 0), true)".
This is not a functional change, but should hopefully make it less
likely that people and static analyzers believe there is a typo here
(i.e., to make it clear that the intention was not "X && *foo != 0").
Thanks to David Herrmann for the suggestion.
|
|
Both as documentation, and to make Coverity happy.
Fixes CID #1241495 and #1241496.
|
|
|
|
This commit introduces possibility to call parse_env_file_internal() and hand
over extra argument where we will accumulate how many items were successfully
parsed and pushed by callback. We make use of this in parse_env_file() and
return number of parsed items on success instead of always returning zero.
As a side-effect this commit should fix bug that locale settings in
/etc/locale.conf are not overriden by options passed via kernel command line.
|
|
Instead of operating on an sd_bus_message object, expose an API that has 4
functions:
policy_check_own()
policy_check_hello()
policy_check_recv()
policy_check_send()
This also allows dropping extra code to parse message contents - the bus
proxy already has dedicated code paths for that, and we can hook into
those later.
Tests amended accordingly.
|
|
strerror_r does not return null here and even if it did we would have
problems already at the preceding strlen call.
Found by coverity. Fixes: CID#1237770
|
|
Allow users to query the display dimensions of a grdev_display. This is
required to properly resize the objects to be rendered.
|
|
Make sure the kernel always returns events properly. This is guaranteed
right now, otherwise, we do something really wrong. But lets be sure and
verify the received values properly. This also silences some coverity
warnings.
|
|
We used to set "pipe->tile = tile" inside of the leaf allocation. We no
longer do that. Verify that "out" is non-NULL, otherwise we'd leak memory.
This is currently always given, but make sure to add an assert(), so
coverity does not complain.
|
|
Binary operators with two pointers as arguments always operate on
object-size, not bytes. That is, "int *a, *b", (a - b) calculates the
number of integers between b and a, not the number of bytes.
Fix our cache-offset calculation to not use sizeof() with full-ptr
arithmetic.
|
|
This adds some log-messages to ioctl() calls where we don't really care
for the return value. It isn't strictly necessary to look for those, but
lets be sure and print warnings. This silences gcc and coverity, and also
makes sure we get reports in case something goes wrong and we didn't
expect it to fail that way.
|
|
|
|
Just a rename of two struct members to make the header file c++ compatible.
|
|
Other functions in this file follow this pattern,
we have vconsole_write_data and locale_write_data.
|
|
src/shared/label.c:255:15: warning: unused variable 'l' [-Wunused-variable]
char *l = NULL;
^
|
|
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=84201
|
|
The kdbus logic name registry logic was changed to transport the actual
name to acquire, release or report in a kdbus item.
This brings the name API a little more in line with other calls, and allows
for later augmentation.
Follow that change on the systemd side.
|
|
Lets not unnecessarily rely on __WORDSIZE, which is not clearly specified
by any spec. Use explicit size comparisons if we're not interested in the
WORDSIZE, anyway.
(David: adjust commit message to explain why we do this)
|
|
Now that we no longer propagate callback return values, we can safely call
into user-callbacks during sysview_context_stop(). This way, users can
rely on all objects to be removed via callbacks (except if they failed
during object creation). This avoids duplicating any object hashtables on
the users' side and reduces memory consumption.
|
|
We cannot sanely propagate error codes if we call into user-callbacks
multiple times for multiple objects. There is no way to merge those errors
or somehow propagate them.
However, we can just act similar to sd-event and print a log-message while
discarding the values. This way, we allow error-returns, but can properly
continue working on our objects.
|
|
Add "userdata" storage to a bunch of external objects, namely displays and
sessions. Furthermore, add some property retrieval helpers.
This is required if we want external API users to not duplicate our own
object hashtables, but retrieve context from the objects themselves.
|
|
Instead of adding matches per device, we now add logind matches per
session. This reduces the number of matches considerably and saves
resources.
|
