| Age | Commit message (Collapse) | Author |
|---|
|
The call is only used by the mount and automount unit types, but that's
already enough to consider it generic unit functionality, hence move it
out of mount.c and into unit.c.
|
|
This changes log_unit_info() (and friends) to take a real Unit* object
insted of just a unit name as parameter. The call will now prefix all
logged messages with the unit name, thus allowing the unit name to be
dropped from the various passed romat strings, simplifying invocations
drastically, and unifying log output across messages. Also, UNIT= vs.
USER_UNIT= is now derived from the Manager object attached to the Unit
object, instead of getpid(). This has the benefit of correcting the
field for --test runs.
Also contains a couple of other logging improvements:
- Drops a couple of strerror() invocations in favour of using %m.
- Not only .mount units now warn if a symlinks exist for the mount
point already, .automount units do that too, now.
- A few invocations of log_struct() that didn't actually pass any
additional structured data have been replaced by simpler invocations
of log_unit_info() and friends.
- For structured data a new LOG_UNIT_MESSAGE() macro has been added,
that works like LOG_MESSAGE() but prefixes the message with the unit
name. Similar, there's now LOG_LINK_MESSAGE() and
LOG_NETDEV_MESSAGE().
- For structured data new LOG_UNIT_ID(), LOG_LINK_INTERFACE(),
LOG_NETDEV_INTERFACE() macros have been added that generate the
necessary per object fields. The old log_unit_struct() call has been
removed in favour of these new macros used in raw log_struct()
invocations. In addition to removing one more function call this
allows generated structured log messages that contain two object
fields, as necessary for example for network interfaces that are
joined into another network interface, and whose messages shall be
indexed by both.
- The LOG_ERRNO() macro has been removed, in favour of
log_struct_errno(). The latter has the benefit of ensuring that %m in
format strings is properly resolved to the specified error number.
- A number of logging messages have been converted to use
log_unit_info() instead of log_info()
- The client code in sysv-generator no longer #includes core code from
src/core/.
- log_unit_full_errno() has been removed, log_unit_full() instead takes
an errno now, too.
- log_unit_info(), log_link_info(), log_netdev_info() and friends, now
avoid double evaluation of their parameters
|
|
Otherwise it might be passed in as 0, which is a valid fd, but usually
does not refer to a real endpoint.
|
|
Under the assumption that strcmp() is cheaper than memory allocation,
let's avoid the allocation, if the new value is identical to the old.
|
|
Let's just pass on what the user set for us.
|
|
CID# 1297428
|
|
CID#1297436
|
|
|
|
In the initrafms, generate a systemd-fsck-root.service to replace
systemd-fsck@<sysroot-device>.service. This way, after we transition
to the real root, systemd-fsck-root.service is marked as already done.
This introduces an unnecessary synchronization point, because
systemd-fsck@* is ordered after systemd-fsck-root also in the
initramfs. In practice this shouldn't be a problem.
https://bugzilla.redhat.com/show_bug.cgi?id=1201979
C.f. 956eaf2b8d6c9999024705ddadc7393bc707de02.
|
|
|
|
Simply query the size of the hashmap keeping all the worker contexts instead.
|
|
This makes the code somewhat more readable.
|
|
Make the worker context have the same life-span as the worker process. It is created on fork()
and free'd on SIGCHLD.
The change means that we can get worker_returned() for a worker context that is no longer around,
this is not a problem and we can just drop the message. The only use for worker_returned() is to
know to reschedule events to workers that are still around, so if the worker has already exited
it is not important to keep track of. We still print a debug statement in this case to be on the
safe side.
|
|
|
|
Eeeew!
|
|
CID#1296244
|
|
|
|
Follow the coding style and avoid the exit handlers.
|
|
We never return magic exit codes, but just EXIT_FAILUER or EXIT_SUCCESS.
|
|
|
|
|
|
|
|
Take and drop explicit references where it makes sense.
|
|
This is not used in the worker, so avoid having to free it there.
|
|
|
|
We used to use this to track failed events so they could be retriggered,
but that is no longer done, so the code can be dropped.
|
|
|
|
|
|
|
|
Whenever systemd is re-executed, it tries to create a system bus via
kdbus. If the system did not have kdbus loaded during bootup, but the
module is loaded later on manually, this will cause two system buses
running (kdbus and dbus-daemon in parallel).
This patch makes sure we never try to create kdbus buses if it wasn't
explicitly requested on the command-line.
|
|
Not needed since 99f861310d3f05f4.
|
|
On read-only filesystems trying to create the target will not fail with
EEXIST but with EROFS. Handle EROFS by checking if the target already
exists, and if empty when truncating.
This avoids reporting errors if tmpfiles doesn't actually needs to do
anything.
[zj: revert condition to whitelist rather then blacklisting, and add goto
to avoid stat'ting twice.]
|
|
|
|
They are not currently used, but the Makefile rules don't know that.
It's easier to ignore them, then to special-case creation rules.
|
|
Continuing the general trend of splitting up util.[ch]. I specifically
want to reuse this code in https://github.com/GNOME/libglnx and
having it split up will make future copy-pasting easier.
|
|
machined is getting an EACCES when trying to create the lock file for
images because the mode on /run/systemd/nspawn/locks is 0600.
mkdir("/run/systemd/nspawn/locks", 0600) = -1 EEXIST (File exists)
stat("/run/systemd/nspawn/locks", {st_mode=S_IFDIR|0600, st_size=40, ...}) = 0
open("/run/systemd/nspawn/locks/inode-41:256", O_RDWR|O_CREAT|O_NOCTTY|O_NOFOLLOW|O_CLOEXEC, 0600) = -1 EACCES (Permission denied)
This commit adjusts the mode to 0700 to correct the issue.
|
|
|
|
from unit names
Let's better be safe then sorry.
|
|
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
We should be more strict when verifying paths with path_is_safe() for
potentially dangerous constructs, and that includes lengths of
PATH_MAX-1 and larger. Be more accurate here.
|
|
|
|
This makes it obvious that those functions are only usable in the
initramfs.
Also, add a warning when noauto, nofail, or automount is used for the
root fs, instead of silently ignoring. Using those options would be a
sign of significant misconfiguration, and if we bother to check for
them, than let's go all the way and complain.
Other various small cleanups and reformattings elsewhere.
|
|
When setting IPv6 addresses acquired by DHCPv6, systemd-networkd sets
the IFA_F_NOPREFIXROUTE flag in the IFA_FLAGS netlink attribute. As
the flag and the attribute are present starting with Linux 3.14, older
kernels will need systemd-network to manage prefix route expiry.
By default, DHCPv6 addresses are first assigned setting the
IFA_F_NOPREFIXROUTE flag in the IFA_FLAGS netlink attribute. Should
the address assignment fail, the same assignment is tried without
the IFA_FLAGS attribute. Should also the second attempt fail, an error
is printed and address assignment ends with failure. As successful use
of the IFA_FLAGS netlink attribute is recorded in the Link structure,
the DHCPv6 code will know if the kernel or systemd-network fallback
code handles expiring prefixes.
The prefix expiration and IPv6 address updating fallback code is
resurrected from the parts deleted with commit
47d45d3cde45d6545367570264e4e3636bc9e345.
This patch can be removed once the minimum kernel requirements are
greater than or equal to 3.14.
|
|
filtered was used to store an allocated string twice. The first allocation was
thus lost. The string is not needed for anything, so simply skip the allocation.
Fixup for deb0a77cf0b409141c4.
|
|
|
|
Do not calculate the cgroup path manually, just use normal unit fields
and calls for that.
|
|
|
|
|
|
instance of a process
units are organized in slice trees, not only for the system instance,
but also for user systemd instances, expose this properly.
|
