| Age | Commit message (Collapse) | Author |
|---|
|
|
|
constructing message
|
|
Make sure not to run xkb-keymap validation twice if pk-queries are used.
Move it below pk-checks.
|
|
Properly forward all XKB messages. You can use XKB_LOG_VERBOSITY= to
control the amount of messages sent by XKB. We explicitly set
XKB_LOG_LEVEL to 7 you can use SYSTEMD_LOG_LEVEL to control the log-level
generically.
|
|
Use XKB_CONTEXT_NO_FLAGS instead of magic 0.
|
|
Before forwarding keyboard events, feed them into possible compose tables.
This enables Compose-key and Dead-key features.
Few notes:
* REPEAT events are never fed into compose tables. It just doesn't make
sense and is usually not wanted. Compose-sequences are usually hard to
remember and take time to type. Thus, the REPEAT event of the
Compose-key itself would often cancel the compose sequence already.
* Stop resolving symbols for UP events. Anything but keycodes is never
associated to a physical key, but is a one-time action. There is
nothing like UP events for key-symbols!
* Cancel compose-sequences on Multi-Key UP. See the inline comment. We
should make this configurable!
|
|
Add support for compose files to idev-keyboard. This requires
libxkbcommon-0.5.0, which is pretty new, but should be fine.
We don't use the compose-files, yet. Further commits will put life into
them.
|
|
In service file, if the file has some of special SMACK label in
ExecStart= and systemd has no permission for the special SMACK label
then permission error will occurred. To resolve this, systemd should
be able to set its SMACK label to something accessible of ExecStart=.
So introduce new SmackProcessLabel. If label is specified with
SmackProcessLabel= then the child systemd will set its label to
that. To successfully execute the ExecStart=, accessible label should
be specified with SmackProcessLabel=.
Additionally, by SMACK policy, if the file in ExecStart= has no
SMACK64EXEC then the executed process will have given label by
SmackProcessLabel=. But if the file has SMACK64EXEC then the
SMACK64EXEC label will be overridden.
[zj: reword man page]
|
|
A negative return code was treated as a true value.
|
|
Introduce a new optional dependency on libxkbcommon for systemd-localed.
Whenever the x11 keymap settings are changed, use libxkbcommon to compile
the keymap. If the compilation fails, print a warning so users will get
notified.
On compilation failure, we still update the keymap settings for now. This
patch just introduces the xkbcommon infrastructure to have keymap
validation in place. We can later decide if/how we want to enforce this.
|
|
For plain dm-crypt devices, the behavior of cryptsetup package is to
ignore the hash algorithm when a key file is provided. It seems wrong
to ignore a hash when it is explicitly specified, but we should default
to no hash if the keyfile is specified.
https://bugs.freedesktop.org/show_bug.cgi?id=52630
|
|
If for any reason the check failed (selinux?), we would still issue
the warning. Check the return status.
|
|
This makes the calling code a bit simpler.
|
|
strv_extend returns 0 in the case of success which means that
else if (bus_track_deserialize_item(&m->deserialized_subscribed, l) == 0)
log_warning("Unknown serialization item '%s'", l);
will be printed when value is added correctly.
|
|
Also update TODO, empty environment variables in Environment= and
EnvironmentFile= options work.
|
|
Suggested-by: Peter Mattern <matternp@arcor.de>
http://lists.freedesktop.org/archives/systemd-devel/2014-November/025437.html
|
|
commit 79d80fc1466512d0ca211f4bfcd9de5f2f816a5a introduced a regression that
prevents mounting a tmpfs if the mount point already exits in the container's
root file system. This commit fixes the problem by ignoring EEXIST.
|
|
systemd-run would fail when run with -M or -H and an absolute path,
if this path did not exists locally. Allow it to continue, since we
don't have a nice way of checking if the binary exists remotely.
The case where -M or -H is used and a local path is unchanged, and we
still iterate over $PATH to find the binary. We need to convert to an
absolute path, and we don't have a nice mechanism to check remotely,
so we assume that the binary will be located in the same place locally
and remotely.
http://lists.freedesktop.org/archives/systemd-devel/2014-November/025418.html
|
|
IFLA_BRPORT_LEARNING was added in v3.10-rc4-583-g9ba18891f7,
and IFLA_BRPORT_UNICAST_FLOOD in v3.10-rc4-584-g867a59436f.
|
|
Mips has getrandom() too, but there's just too many variants
for me too care. Either someone who cares does it, or they get
compile-time warnings with old kernel headers.
|
|
it seems to be a typo introduced by ebcf1f97de4f6b1580ae55eb56b1a3939fe6b602
- _r = selinux_access_check(_b, _m, _u->source_path ?:_u->fragment_path, (permission), &_error); \
+ ({ Unit *_unit = (unit); selinux_generic_access_check(bus,message, _unit->fragment_path ?: _unit->fragment_path, permission,error); })
|
|
|
|
|
|
--link-journal={host,guest} fail if the host does not have persistent
journalling enabled and /var/log/journal/ does not exist. Even worse, as there
is no stdout/err any more, there is no error message to point that out.
Introduce two new modes "try-host" and "try-guest" which don't fail in this
case, and instead just silently skip the guest journal setup.
Change -j to mean "try-guest" instead of "guest", and fix the wrong --help
output for it (it said "host" before).
Change systemd-nspawn@.service.in to use "try-guest" so that this unit works
with both persistent and non-persistent journals on the host without failing.
https://bugs.debian.org/770275
|
|
command, and support both a terse and a verbose output format
|
|
|
|
|
|
signature is passed in
|
|
|
|
/proc/[pid]/cwd and /proc/[pid]/root are symliks to corresponding
directories
The added functions returns values of that symlinks.
|
|
|
|
for all objects
This is a ton more useful when some services fail, since we continue
crawling then and output everything to a pager.
|
|
|
|
|
|
same time
|
|
|
|
|
|
already is in the set
|
|
it for a future "busctl introspect" command
|
|
The lease is usually tied to the client ID, so users of the
lease may want to know what client ID it was acquired with.
|
|
The client identifier can be in many different formats, not just
the one that systemd creates from the Ethernet MAC address. Non-
ethernet interfaces may have different client IDs formats. Users
may also have custom client IDs that the wish to use to preserve
lease options delivered by servers configured with the existing
client ID.
|
|
Based on patch by Dan Williams.
|
|
client->secs wasn't getting set in the REBOOT state, causing
an assertion. REBOOT should work the same way as INIT, per
RFC 2131:
secs 2 Filled in by client, seconds elapsed since client
began address acquisition or renewal process.
REBOOT is necessary because some DHCP servers (eg on
home routers) do not hand back the same IP address unless the
'ciaddr' field is filled with that address, which DISCOVER
cannot do per the RFCs. This leads to multiple leases
on machine reboot or DHCP client restart.
|
|
fix:
CID 1237553 (#1 of 6): Unchecked return value from library
(CHECKED_RETURN
CID 1237553 (#3 of 6): Unchecked return value from library
(CHECKED_RETURN)
CID 1237553 (#4 of 6): Unchecked return value from library
(CHECKED_RETURN)
CID 1237553 (#5 of 6): Unchecked return value from library
(CHECKED_RETURN
CID 1237553 (#6 of 6): Unchecked return value from library
(CHECKED_RETURN)
|
|
|
|
|
|
fix 1237557 Unchecked return value from library
|
|
CID#979416. There is no real race here to fix, but lets make coverity
happy and rework the code.
Note that we still fail if the directory is removed _after_ we ran
mkdir(), so the same race is still there. Coverity is complaining, though.
Rewrite the code to make it happy.
(David: rewrote the commit-message to note that this is not a race. If I'm
wrong, blame me, not Ronny!)
|
|
username was already checked with isempty() and cannot be null at
this point.
CID#1237766
|
|
Our API calls check the validity of bus names anyway, hence we don't
have to do this before calling them...
|
