summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-07-07Fix typoZbigniew Jędrzejewski-Szmek
2014-07-07fstab-generator: fix trivial leakZbigniew Jędrzejewski-Szmek
2014-07-07journal/compress: fix calls to decompress_blobZbigniew Jędrzejewski-Szmek
2014-07-07resolved: make use of union in_addr_union in resolved, tooLennart Poettering
2014-07-07networkd: simplify signal handling of SIGTERM/SIGINTLennart Poettering
sd-event makes handling SIGTERM/SIGINT a lot easier than it used to, let's make use of this
2014-07-07resolved: make sure SIGTER/SIGINT actually can be caught and processedLennart Poettering
2014-07-07resolved: let config_parse() open the configuration file for usLennart Poettering
2014-07-07shared: fix format string for usec_t typeLennart Poettering
2014-07-07escape: beef up new systemd-escape toolLennart Poettering
Add various options for making it easy unescape, or mangle, or format as template instance or append a suffix.
2014-07-07add new systemd-escape toolMichael Biebl
2014-07-07dropin: add format attribute and fix a wrong callerThomas Hindoe Paaboel Andersen
2014-07-07fstab-generator: add comma when removed option is in the middleZbigniew Jędrzejewski-Szmek
xxx,x-systemd.default-timeout=y,zzz was filtered to xxxzzz, but should be xxx,zzz, of course.
2014-07-07networkd: add support for modeSusant Sahani
This patch adds supports networkd to configure bond mode during creation via persistent conf. Mode can be configured with conf param 'Mode'. A new section Bond is added to the conf to support bond mode. These modes can be configured now. balance-rr active-backup balance-xor broadcast 802.3ad balance-tlb balance-alb Example conf file: test-bond.conf [NetDev] Name=bond1 Kind=bond [Bond] Mode=balance-xor Test case: 1. start networkd service: 12: bond1: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN mode DEFAULT group default link/ether 22:89:6c:47:23:d2 brd ff:ff:ff:ff:ff:ff 2. find bond mode: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: load balancing (xor) Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 Changes: 1. Added file networkd-bond.c 2. Bond mode enum BondMode 3. conf section [Bond] [tomegun: whitespace]
2014-07-07networkd veth: Make kind assertSusant Sahani
It's more appropriate to make it's assert than -ENOTSUP
2014-07-07firstboot: get rid of firstboot generator again, introduce ↵Lennart Poettering
ConditionFirstBoot= instead As Zbigniew pointed out a new ConditionFirstBoot= appears like the nicer way to hook in systemd-firstboot.service on first boots (those with /etc unpopulated), so let's do this, and get rid of the generator again.
2014-07-07firstboot: follow lock protocol when changing /etc/shadowLennart Poettering
2014-07-07base-filesystem.c: terminate string array elements with \0Harald Hoyer
NULSTR_FOREACH() looks for a terminating zero and the element also needs one.
2014-07-07service: flush status text and errno values each time a service is startedLennart Poettering
We shouldn't show status texts from previous service starts
2014-07-07systemctl: show StatusErrno value in "systemctl status"Lennart Poettering
2014-07-07service: don't accept negative ERRNO= notification messagesLennart Poettering
2014-07-07service: minor modernizationLennart Poettering
2014-07-07core: Added support for ERRNO NOTIFY_SOCKET message parsing, and added ↵Miguel Angel Ajo
StatusErrno dbus property along StatusText to allow notification of numeric status condition while degraded service operation or any other special situation.
2014-07-07firstboot: change /etc/shadow access mode to 000Lennart Poettering
It appears to be customary to remove all access bits from /etc/shadow including those for the root owner), hence let's do the same.
2014-07-07dhcp-network: make clear that we are ANDing Fragment offset field with maskMichal Sekletar
Reading BPF assembly written as C macros is inherently difficult. Don't make it harder than necessary and provide clearer explanation in the comment.
2014-07-07dhcp-network: ignore IP packets with More Fragments (MF) flag setMichal Sekletar
We already ignore IP fragments, because we expect that Fragment offset (FO) field is not set. However first fragment in a fragmented IP flow will have all zeroes in FO field. We should ignore such packet as well, thus we need to look at MF flag in the IP header. Checking MF flag will filter out all except last packet in fragmented flows. Last one will be ruled out by next check for value of FO.
2014-07-07firstboot: add new component to query basic system settings on first boot, ↵Lennart Poettering
or when creating OS images offline A new tool "systemd-firstboot" can be used either interactively on boot, where it will query basic locale, timezone, hostname, root password information and set it. Or it can be used non-interactively from the command line when prepareing disk images for booting. When used non-inertactively the tool can either copy settings from the host, or take settings on the command line. $ systemd-firstboot --root=/path/to/my/new/root --copy-locale --copy-root-password --hostname=waldi The tool will be automatically invoked (interactively) now on first boot if /etc is found unpopulated. This also creates the infrastructure for generators to be notified via an environment variable whether they are running on the first boot, or not.
2014-07-07architecture: add string table entries for mips-le archs which were missingLennart Poettering
2014-07-07fileio: simplify write_env_file()Lennart Poettering
2014-07-07util: don't consider tabs special in string_has_cc() anymoreLennart Poettering
Instead, take a list of exceptions to our usual CC check
2014-07-07shared: make timezone and locale enumeration and validation genericLennart Poettering
This way we can reuse it other code thatn just localectl/localed + timedatectl/timedated.
2014-07-07main: explain our /etc empty check a bit in a commentLennart Poettering
2014-07-07util: consider 0x7F a control chracter (which it is: DEL)Lennart Poettering
Let's better be safe than sorry.
2014-07-07udev: link_config - ignore errors due to missing MAC addressTom Gundersen
Otherwis, we get misleading error messages on links with MACs. Reported by Leonid Isaev.
2014-07-07vconsole-setup: fix inverted error messagesZbigniew Jędrzejewski-Szmek
Introduced in abee28c56d. Pointed-out-by: Werner Fink <werner@suse.de>
2014-07-07networkd: netdev - add missing refsTom Gundersen
Without this, the underlying device would get freed (and hence fail).
2014-07-07networkd: add support for peer addressSusant Sahani
This patch adds peer address support for networkd . In the [Address] a new configurable param is Peer. [Match] Name=ipip-tun [Address] Address=10.0.0.1/32 Peer=10.0.0.2/32
2014-07-07dhcp-network: add check for DHCP.chaddrMichal Sekletar
Check that received DHCP packets actually include our MAC address in chaddr field. BPF interpreter has 32 bit wide registers but MAC address is 48 bits long so we have to do check in two steps.
2014-07-06coredumpctl: show a useful error on permission problemsZbigniew Jędrzejewski-Szmek
2014-07-06compress: add benchmark-style testZbigniew Jędrzejewski-Szmek
This is useful to test the behaviour of the compressor for various buffer sizes. Time is limited to a minute per compression, since otherwise, when LZ4 takes more than a second which is necessary to reduce the noise, XZ takes more than 10 minutes. % build/test-compress-benchmark (without time limit) XZ: compressed & decompressed 2535300963 bytes in 794.57s (3.04MiB/s), mean compresion 99.95%, skipped 3570 bytes LZ4: compressed & decompressed 2535303543 bytes in 1.56s (1550.07MiB/s), mean compresion 99.60%, skipped 990 bytes % build/test-compress-benchmark (with time limit) XZ: compressed & decompressed 174321481 bytes in 60.02s (2.77MiB/s), mean compresion 99.76%, skipped 3570 bytes LZ4: compressed & decompressed 2535303543 bytes in 1.63s (1480.83MiB/s), mean compresion 99.60%, skipped 990 bytes It appears that there's a bug in lzma_end where it leaks 32 bytes.
2014-07-06journal: add LZ4 as optional compressorZbigniew Jędrzejewski-Szmek
Add liblz4 as an optional dependency when requested with --enable-lz4, and use it in preference to liblzma for journal blob and coredump compression. To retain backwards compatibility, XZ is used to decompress old blobs. Things will function correctly only with lz4-119. Based on the benchmarks found on the web, lz4 seems to be the best choice for "quick" compressors atm. For pkg-config status, see http://code.google.com/p/lz4/issues/detail?id=135.
2014-07-06journal/compress: return early in uncompress_startswithZbigniew Jędrzejewski-Szmek
uncompress_startswith would always decode the whole stream, even if it did not start with the given prefix. Reallocation policy was also strange.
2014-07-06vconsole-setup: run setfont before loadkeysZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=80685
2014-07-06sysusers: fix uninitialized warningRonny Chevalier
2014-07-06machine: don't return uninitialized variableTom Gundersen
Repotred by Ronny Chevalier
2014-07-04networkd: accept section DHCP in systemd.network filesSteven Noonan
2014-07-04networkd: don't clear dhcpv6 lease timers if there's no previous leaseSteven Noonan
If client->lease is NULL, dhcp6_lease_clear_timers will cause a segmentation fault.
2014-07-04nspawn: add new --volatile switch for booting containers in volatile ↵Lennart Poettering
(ephemeral) mode Two modes are supported: --volatile=yes mounts only /usr into the container, and a tmpfs as root directory. --volatile=state mounts the full OS tree in, but overmounts /var with a tmpfs. --volatile=yes hence boots with an unpopulated /etc and /var, starting with pristine configuration and state. --volatile=state hence boots with an unpopulated /var, only starting with pristine state.
2014-07-04main: change check whether /etc is unpopulated to look for /etc/machine-idLennart Poettering
Previously, we checked whether /etc was completely empty. This makes it difficult though for container managers such as nspawn to install a small number of files (such as /etc/timezone), and have the system otherwise populate its own tree. Hence, change this by looking for /etc/machine-id, which should be a good sign whether /etc is populated or not.
2014-07-03networkd: properly track addresses when first addedTom Gundersen
When doing a NEWADDR, the reply we get back is the NEWADDR itself, rather than just an empty ack (unlike how NEWLINK works). For this reason, the process that did the NEWADDR does not get the broadcast message. We were only listening for broadcast messages, and hence not tracking the addresses we added ourselves. This went unnoticed as the kernel will usually send NEWADDR messages from time to time anyway, so things would mostly work, but in the worst case we would not notice that a routable address was available and consider ourselves offline.
2014-07-03networkd: link - improve link tracking loggingTom Gundersen