summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-03-13getty: Start getty on 3270 terminals available on Linux on System zHendrik Brueckner
Add the first 3270 terminal device that is associated with the Linux preferred console to the list of virtualization consoles. This is required to automatically start a getty if the conmode=3270 kernel parameter is specified for Linux on z/VM instances. Note that a queued upstream patch also enable the 3270 terminal device if it is associated with the Linux preferred console. How To successfully start agetty on a 3270 terminal, a change in the agetty parameter order is required. Previously, agetty would started like this: /sbin/agetty --keep-baud 3270/tty1 115200,38400,9600 TERM The agetty program interprets the "3270/tty1" as baud rate and fails to start with the "bad speed: 3270/tty1" error message. Fixing this in agetty is more complex rather than reordering the command line parameters like this: /sbin/agetty --keep-baud 115200,38400,9600 3270/tty1 TERM According to agetty sources and "agetty --help", agetty accepts the "tty", "baudrate tty", and "tty baudrate" specifications. P.S. The "tty: Set correct tty name in 'active' sysfs attribute" introduces a change to display the terminal device which is associated with the Linux preferred console. This change helps to let systemd handle this particular case only. Without the changes of this commit, no additional 3270 terminal device can be managed by systemd. https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git/commit/?id=723abd87f6e536f1353c8f64f621520bc29523a3
2014-03-13systemctl: autopage always if systemctl status is invoked without argsLennart Poettering
2014-03-13systemctl: suppress duplicate newline if there's not log output in ↵Lennart Poettering
"systemctl status"
2014-03-13systemctl: reorder verbsLennart Poettering
2014-03-13systemctl: make sure status -a doesn't terminate too soonLennart Poettering
2014-03-13systemctl: show a colored red dot in "status" output indicating the state of ↵Lennart Poettering
a unit
2014-03-13nspawn: honour GPT partition flags when mounting file systems following the ↵Lennart Poettering
discoverable partitions spec
2014-03-13gpt-auto-generator: there's no point in looking for a superblock on raw ↵Lennart Poettering
disk, we only care for a partition table
2014-03-13gpt-auto-generator: print debug messages when we ignore a block deviceLennart Poettering
2014-03-13gpt-auto-generator: honour read-only and no-auto flag from GPT dataLennart Poettering
Similar to the read-only and no-automount flags of Microsoft Basic Data Partitions, introduce our own flags. We map them to the same flag bits as Microsoft's, to keep things simple.
2014-03-13cryptsetup: call static variables parsed from command line arg_XYZ like in ↵Lennart Poettering
all other tools
2014-03-12gpt-auto-generator: don't return OOM on parentless devicesTomasz Torcz
2014-03-12socket.c: make use of union sockaddr_unionDaniel Buch
2014-03-12systemctl: when "systemctl status" is called without arguments show a short ↵Lennart Poettering
overall system state Previously "systemctl status" without argument would print the status of all loaded units. This has now been moved to "systemctl status -a".
2014-03-12manager: use system state enum where appropriateLennart Poettering
2014-03-12macro: make sure we can use IN_SET() also with complex function calls as ↵Lennart Poettering
first argument
2014-03-12systemctl: add new "list-machines" commandLennart Poettering
"systemctl list-machines" shows one line per local container which includes the current system state of the container, the number of failed units as well as the number of currently queued jobs.
2014-03-12core: introduce system state enumLennart Poettering
The system state knows the states starting → running/degraded/maintenance → stopping, where: starting = system startup running = normal operation degraded = at least one unit is currently in failed state maintenance = rescue/emergency mode is active or queued stopping = system shutdown
2014-03-12sd-login: add sd_machine_get_class() callLennart Poettering
2014-03-12util: Make in_charset a static inline in util.hJosh Triplett
With in_charset now reduced to a one-liner (plus asserts), make it a static inline.
2014-03-12util: Rewrite in_charset to use strspnJosh Triplett
This simplifies in_charset down to a one-liner, and allows for possible optimizations of strspn in libc.
2014-03-12backlight: Avoid restoring brightness to an unreadably dim levelJosh Triplett
Some systems turn the backlight all the way off at the lowest levels. Clamp saved brightness to at least 1 or 5% of max_brightness. This avoids preserving an unreadably dim screen, which would otherwise force the user to disable state restoration.
2014-03-12backlight: Fix copy/paste error printing an unrelated error codeJosh Triplett
udev_device_get_sysattr_value returns NULL on failure, but doesn't provide an error code; thus, when printing an error from it, don't print an unrelated error code from a previous call.
2014-03-12test-dhcp-client: remove pointless initializer, wrongly committed earlierKay Sievers
2014-03-11logind: move lid switch handling from logind-main to logind-coreKay Sievers
../src/login/logind-dbus.c:1352: error: undefined reference to 'manager_set_lid_switch_ignore' collect2: error: ld returned 1 exit status make[2]: *** [test-login-tables]
2014-03-11build-sys: add libsystemd-label to network/dhcp usersKay Sievers
2014-03-11bus: replace sd_bus_label_{escape,unescape}() by new ↵Lennart Poettering
sd_bus_path_{encode,decode}() The new calls work similarly, but enforce a that a common, fixed bus path prefix is used. This follows discussions with Simon McVittie on IRC that it should be a good idea to make sure that people don't use the escaping applied here too wildly as anything other than the last label of a bus path.
2014-03-11fstab-generator: when running in a container, ignore fstab entries referring ↵Lennart Poettering
to device nodes Since these device nodes will never appear in the container anyway there's no point in waiting for them. This makes it easier to boot images generated with general purpose installers like Anaconda which unconditionally populate /etc/fstab to boot in containers.
2014-03-11hostnamectl: read OS pretty_name and cpe_name from remoteDjalal Harouni
2014-03-11hostnamed: expose OperatingSystemPrettyName and OperatingSystemCPEName on ↵Djalal Harouni
the bus
2014-03-11hostnamed: minor improvements in context_write_data_other()Djalal Harouni
Prepare context_write_data_other() and rename it to context_write_data_machine_info()
2014-03-11logind: Do not fail display count if a device has no parentMantas Mikulėnas
udev_device_get_parent() may return NULL when the device doesn't have a parent, as is the case with (for example) /sys/devices/virtual/drm/ttm. Also, log an actual error message instead of "-12 displays connected".
2014-03-11nspawn: fix argv[0] for getentMantas Mikulėnas
2014-03-11nspawn: allow using kdbus from nspawn containersLennart Poettering
2014-03-11core: support globbing matches in DeviceAllow= when checking for device groupsLennart Poettering
2014-03-11gpt-auto-generator: rename root device node symlink to /dev/gpt-auto-rootLennart Poettering
Before it was placed in /dev/disk/by-id, which makes it a bit too much API. However, it's mostly an implementation detail for now, hence move it out of the stable block device dir.
2014-03-11udev: properly detect reference to unexisting part of PROGRAM's resultLukas Nykryn
2014-03-11sd-dhcp-client: use close_nointr_nofail()Tom Gundersen
We are already assuming the close() will not fail, so make it explicit.
2014-03-11networkd: rework startupTom Gundersen
Open all listenerns before loading configuration.
2014-03-11sd-dhcp: generalise ip header generationTom Gundersen
This will be needed for sd-dhcp-server.
2014-03-11logind: add a debug message in case the session already existsDjalal Harouni
If the session already exists then the only way to log it is to set the debug option of pam_systemd. There are no debug messages in the login service that permits to log if the session already exists. So just add it, and while we are it add the "uid" field to the debug message that indicates that the session was created.
2014-03-11systemctl: for switch-root check, if we switch to a systemd initHarald Hoyer
If "systemctl switch-root" is called with a specific "INIT" or /proc/cmdline contains "init=", then systemd would not serialize itsself. Let systemctl check, if the new init is in the standard systemd installation path and if so, clear the INIT parameter, to let systemd serialize itsself.
2014-03-11util: add files_same() helper functionHarald Hoyer
files_same() returns 1, if the files are the same 0, if the files have different inode/dev numbers errno, for any stat error
2014-03-11dbus: suppress duplicate and misleading messagesLennart Poettering
When we try to send a signal on a connection we didn't hae the time to process the Disconnected message yet, don't generate multiple warning messages, but only a single debug message. https://bugs.freedesktop.org/show_bug.cgi?id=75874
2014-03-11nspawn: fix getent fallbackLennart Poettering
2014-03-11nspawn: when resoliving UIDs/GIDs for "-u", do so in forked off ↵Lennart Poettering
/usr/bin/getent instead of in-process When the container runs a different native architecture than the host we shouldn't attempt to load the container's NSS modules with the host's libc. Instead, resolve UID/GID by invoking /usr/bin/getent in the container. The tool should be fairly universally available and allows us to do resolving of the UID/GID with the container's libc in a parsable format. https://bugs.freedesktop.org/show_bug.cgi?id=75733
2014-03-11nspawn: make sure we don't try to mount the container block device in the ↵Lennart Poettering
child after the parent added us to the device cgroup
2014-03-10nspawn: don't try mknod() of /dev/console with the correct major/minorLennart Poettering
We overmount /dev/console with an external pty anyway, hence there's no point in using the real major/minor when we create the node to overmount. Instead, use the one of /dev/null now. This fixes a race against the cgroup device controller setup we are using. In case /dev/console was create before the cgroup policy was applied all was good, but if created in the opposite order the mknod() would fail, since creating /dev/console is not allowed by it. Creating /dev/null instances is however permitted, and hence use it.
2014-03-10nspawn: add --image= switch to boot GPT disk images that follow the ↵Lennart Poettering
Discoverable Partitions Specification
2014-03-10logind: fix policykit checksZbigniew Jędrzejewski-Szmek