| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Make sure we always check conditions before checking whether the unit
type is supported in unit_start(), since condition checks are "clean
errors", while "not supported" errors are fatal.
This cleans up the boot output of systemd in containers, where a lot of
NOTSUPP lines were shown befor this fix.
This partially reverts 8ff4d2ab0d4758e914aea6d86154d85f2b2c787f which
reorder the checks.
|
|
handle LUKS root partitions better in gpt-auto, plus other fixes
|
|
systemd
Commit 5f4c5fef6 introduced this new test case, but this does not work in
build chroots where cgroupfs is not mounted. So skip the test if systemd is not
running.
|
|
sd-event: make sure to create a signal queue for the right signal
|
|
various fixes to the core, logind, machined, nspawn
|
|
We should never access the "signal" part of the event source unless the
event source is actually for a signal. In this case it's a child pid
handler however, hence make sure to use the right signal.
This is a fix for PR #1177, which in turn was a fix for
9da4cb2be260ed123f2676cb85cb350c527b1492.
|
|
|
|
Let's query the flags only once, and document why we ignore it for the
ESP.
|
|
If the root file system is located on an encrypted root disk, we'll not
find the GPT partition table for it. Let's fix that by following the
slaves/ symlinks in /sys for the device. We only handle devices having
exactly one backing device.
Also see: #1167
|
|
This looks like a typo from commit 9da4cb2b where it was added.
|
|
analyze: add "alias" handling to dot subcommand
|
|
`systemd-analyze dot default.target` works fine
|
|
Provide unit name and operation in manage-units polkit checks (v2)
|
|
sd-bus: make introspection data non-recursive
|
|
.nspawn fiels are simple settings files that may accompany container
images and directories and contain settings otherwise passed on the
nspawn command line. This provides an efficient way to attach execution
data directly to containers.
|
|
This fixes breakage for local host pty handling, introduced in
395745ba533ac91fe118f43ec83f13a752c0b473.
Fixes #1139
|
|
|
|
This funciton is exposed via CanStart on the bus, and should be as
accurate as possible. Hence: make sure to return false for units of unit
types not supported on the system, and for unit types where
configuration failed to load.
Also see #1105.
|
|
|
|
|
|
Currently, our introspection data looks like this:
<node>
<interface name="org.freedesktop.DBus.Peer">
...
</interface>
<interface name="org.freedesktop.DBus.Introspectable">
...
</interface>
<interface name="org.freedesktop.DBus.Properties">
...
</interface>
<node name="org"/>
<node name="org/freedesktop"/>
<node name="org/freedesktop/login1"/>
<node name="org/freedesktop/login1/user"/>
<node name="org/freedesktop/login1/user/self"/>
<node name="org/freedesktop/login1/user/_1000"/>
<node name="org/freedesktop/login1/seat"/>
<node name="org/freedesktop/login1/seat/self"/>
<node name="org/freedesktop/login1/seat/seat0"/>
<node name="org/freedesktop/login1/session"/>
<node name="org/freedesktop/login1/session/self"/>
<node name="org/freedesktop/login1/session/c1"/>
</node>
(ordered alphabetically for better visibility)
This is grossly incorrect. The spec says that we're allowed to return
non-directed children, however, it does not allow us to return data
recursively in multiple parents. If we return "org", then we must not
return anything else that starts with "org/".
It is unclear, whether we can include child-nodes as a tree. Moreover, it
is usually not what the caller wants. Hence, this patch changes sd-bus to
never return introspection data recursively. Instead, only a single
child-layer is returned.
This patch relies on enumerators to never return hierarchies. If someone
registers an enumerator via sd_bus_add_enumerator, they better register
sub-enumerators if they support *TRUE* hierarchies. Each enumerator is
treated as a single layer and not filtered.
Enumerators are still allowed to return nested data. However, that data
is still required to be a single hierarchy. For instance, returning
"/org/foo" and "/com/bar" is fine, but including "/com" or "/org" in that
dataset is not.
This should be the default for enumerators and I see no reason to filter
in sd-bus. Moreover, filtering that data-set would require to sort the
strv by path and then do prefix-filtering. This is O(n log n), which
would be fine, but still better to avoid.
Fixes #664.
|
|
Whenever we run in a user context, sd_bus_{default_user,open_user}() and
friends should always connect to the user-bus of the current context,
instead of deriving the uid from getuid(). This allows us running
programs via sudo/su, without the nasty side-effect of accidentally
connecting to the root user-bus.
This patch enforces the idea of making su/sudo *not* opening sessions by
default. That is, all they do is raising privileges, but keeping
everything set as before. You can still use su/sudo to open real sessions
by requesting a login-session (or loading pam_systemd otherwise).
However, in this case XDG_RUNTIME_DIR= will not be set (as usual in these
cases), hence, you will not be able to connect to *any* user-bus.
Long story short: With this patch applied, both:
- ./busctl --user
- sudo ./busctl --user
..will successfully connect to the user-bus of the local user.
Fixes #390.
|
|
The following details are passed:
- unit: the primary name of the unit upon which the action was
invoked (i.e. after resolving any aliases);
- verb: one of 'start', 'stop', 'reload', 'restart', 'try-restart',
'reload-or-restart', 'reload-or-try-restart', 'kill',
'reset-failed', or 'set-property', corresponding to the
systemctl verb used to invoke the action.
Typical use of these details in a polkit policy rule might be:
// Allow alice to manage example.service;
// fall back to implicit authorization otherwise.
polkit.addRule(function(action, subject) {
if (action.id == "org.freedesktop.systemd1.manage-units" &&
action.lookup("unit") == "example.service" &&
subject.user == "alice") {
return polkit.Result.YES;
}
});
We also supply a custom polkit message that includes the unit's name and
the requested operation.
|
|
Extra details for an action can be supplied when calling polkit's
CheckAuthorization method. Details are a list of key/value string pairs.
Custom policy can use these details when making authorization decisions.
|
|
A variety of sd-event, sd-login and cgroup fixes
|
|
|
|
This adds a new sd_pid_get_cgroup() call to sd-login which may be used
to query the control path of a process. This is useful for programs when
making use of delegation units, in order to figure out which subtree has
been delegated.
In light of the unified control group hierarchy this is finally safe to
do, hence let's add a proper API for it, to make it easier to use this.
|
|
login: fix NULL-deref on wall_message
|
|
We treat an empty wall-message equal to a NULL wall-message since:
commit 5744f59a3ee883ef3a78214bd5236157acdc35ba
Author: Lennart Poettering <lennart@poettering.net>
Date: Fri Sep 4 10:34:47 2015 +0200
logind: treat an empty wall message like a NULL one
Fix the shutdown scheduler to not deref a NULL pointer, but properly
check for an empty wall-message.
Fixes: #1120
|
|
networkd: adjust error codes for nonexisting DHCP data
|
|
Commit 0339cd770 changed libsystemd-network's error code for missing DHCP lease
data from ENOENT to ENODATA. Adjust networkd accordingly.
This fixes interfaces being stuck in "degraded/configuring" mode forever.
https://github.com/systemd/systemd/issues/1147
|
|
Commit efdb023 ("core: unified cgroup hierarchy support") introduced a new
error ENOEXEC in cg_unified() if /sys/fs/cgroup/ is not available. Adjust the
"skip" checks in various tests accordingly.
Add a corresponding "skip" check to test-bus-creds as well, as
sd_bus_creds_new_from_pid() now calls cg_unified() as well.
This re-fixes "make check" in build chroots without /sys/fs/cgroup.
https://github.com/systemd/systemd/issues/1132
|
|
And not bool.
|
|
|
|
Delegation to unpriviliged processes is safe in the unified hierarchy,
hence allow it. This has the benefit of permitting "systemd --user"
instances to further partition their resources between user services.
|
|
Makre sure we always return sensible errors for the various, following
the same rules, and document them in a comment in sd-login.c. Also,
update all relevant man pages accordingly.
|
|
RT signals operate in a queue, and we should be careful to never merge
two queued signals into one. Hence, makes sure we only ever dequeue a
single signal at a time and leave the remaining ones queued in the
signalfd. In order to implement correct priorities for the signals
introduce one signalfd per priority, so that we only process the highest
priority signal at a time.
|
|
|
|
In the unified hierarchy delegating controller access is safe, hence
make sure to enable all controllers for the "payload" subcgroup if we
create it, so that the container will have all controllers enabled the
nspawn service itself has.
|
|
local container
Otherwise we might end up thinking that we support more controllers than
actually enabled for the container we are running in.
|
|
|
|
found
If the controller managed by systemd cannot found in /proc/$PID/cgroup,
return ENODATA, the usual error for cases where the data being looked
for does not exist, even if the process does.
|
|
|
|
Previously, on the legacy hierarchy a non-existing cgroup was considered
identical to an empty one, but the unified hierarchy the check for a
non-existing one returned ENOENT.
|
|
After all a path is a path is a path and we should use path_equal() to
comapre those.
|
|
session
ENODATA is how we usually indicate such "missing info" cases, so we
should do this here, too.
|
|
parse_uid() returns EINVAL for invalid strings, but ENXIO for the
(uid_t) -1 user ids in order to distinguish these two cases. Document
this.
|
|
Let's move the actual cgroup part of it into a new separate function
manager_get_unit_by_pid_cgroup(), and then make
manager_get_unit_by_pid() just a wrapper that also checks the two pid
hashmaps.
Then, let's make sure the various calls that want to deliver events to
the owners of a PID check both hashmaps and the cgroup and deliver the
event to *each* of them. OTOH make sure bus calls like GetUnitByPID()
continue to check the PID hashmaps first and the cgroup only as
fallback.
|
