~lukeshu/systemd - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Collapse)	Author
2014-06-18	networkd: add a number of calls to manipulate in_addr_union structs	Lennart Poettering

2014-06-18	socket-util: introduce in_addr_union similar to sockaddr_union and make use ↵	Lennart Poettering
	of it everywhere
2014-06-18	dhcp-network: remove TODO	Michal Sekletar
	There is no need to explicitly check version of L3 protocol in the ethernet header because we bind socket with .sll_protocol set to ETH_P_IP, thus we only receive IPv4 packets on the socket.
2014-06-18	cryptsetup: introduce new cryptsetup-pre.traget unit so that services can ↵	Lennart Poettering
	make sure they are started before and stopped after any LUKS setup https://bugzilla.redhat.com/show_bug.cgi?id=1097938
2014-06-18	tmpfiles: create directories already with the right label, instead of ↵	Lennart Poettering
	creating them first, and relabeling them afterwards
2014-06-18	tmpfiles: w lines should allow following symlinks	Lennart Poettering

2014-06-18	namespace: properly label device nodes we create	Lennart Poettering
	https://bugzilla.redhat.com/show_bug.cgi?id=1081429
2014-06-18	tmpfiles: add "+" modifier support to b, c, p lines in addition to L	Lennart Poettering

2014-06-17	networkd: veth - fix parsing verification	Tom Gundersen

2014-06-17	networkd: vxlan - fix parsing verification	Tom Gundersen

2014-06-17	networkd: veth - fix memleak	Tom Gundersen

2014-06-17	install: remove unused variable	Thomas Hindoe Paaboel Andersen

2014-06-17	bootchart: set white background	Frederic Crozat
	In programs like eog and gimp the transparant background did not look very good. Similar fix from the one done in systemd-analyze (418e3750)
2014-06-17	networkd: link - fix carrier check on new link	Tom Gundersen
	We were comparing against our own internal enum rather than the kernel exposed one. Found by Thomas Ritter.
2014-06-17	sd-dhcp: checksum - make endianess-neutral	Tom Gundersen
	For efficiency, we group bytes together before adding them up. This is guaranteed to always work (regardless of the byte order) as long as the i-th byte in each group lign up with the i-th byte in each other group. On big-endian machines this broke when handling the trailing few bytes which did not make up a full group of 4 bytes. This patch fixes the problem by explicitly creating a 4 byte zero-padded group out of the trailing bytes. Reported and tested by Thomas Ritter <th.ritter@gmx.at>.
2014-06-16	systemctl: reverse order of args when verbosely creating symlinks	Dave Reisner
	This was backwards. The symlink itself points to the source unit, not the other way around.
2014-06-17	core: populate unit file set with preset data if we boot with empty /etc	Lennart Poettering

2014-06-17	machine-id-setup: allow passing NULL as function argument, for simplicity	Lennart Poettering

2014-06-17	kmod: conditionalize kmod setup on CAP_SYS_MODULE, not whether we run in a ↵	Lennart Poettering
	container It's generally preferrable to conditionalize on the actual ability to do something then the context we run in.
2014-06-17	install: improve paths we show the user when enabling/disabling	Lennart Poettering

2014-06-17	conf-files: fix when for --root= logic	Lennart Poettering
	This is based on parts of similar patches from Michael Marineau and Lukas Nykrin, but simply uses strappenda3().
2014-06-17	systemctl: output human readable strings in "systemctl enable" and ↵	Lennart Poettering
	"systemctl disable"
2014-06-17	install: simplify symlink --root= logic	Lennart Poettering

2014-06-17	install: "systemctl enable" should be a nop for template units lacking a ↵	Lennart Poettering
	DefaultInstance= setting
2014-06-17	log: don't downgrade log level in non-PID 1 if "quiet" is passed on kernel ↵	Lennart Poettering
	cmdline "debug" should apply to all tools, but "quiet" only to PID1.
2014-06-17	install: make sure that --root= mode doesn't make us consider all units ↵	Lennart Poettering
	outside of search path
2014-06-17	install: make sure "systemctl disable foobar@.service" actually removes all ↵	Lennart Poettering
	instances
2014-06-17	install: introduce new DefaultInstance= field for [Install] sections	Lennart Poettering
	The DefaultInstance= name is used when enabling template units when only specifying the template name, but no instance. Add DefaultInstance=tty1 to getty@.service, so that when the template itself is enabled an instance for tty1 is created. This is useful so that we "systemctl preset-all" can work properly, because we can operate on getty@.service after finding it, and the right instance is created.
2014-06-17	install: when looking for a unit file for enabling, search for templates ↵	Lennart Poettering
	only after traversing all search directories Let's always make sure to look in all search directories for the full unit names first, before looking for templates for them.
2014-06-17	install: use symlink_atomic() instead of unlink()+symlink() when force ↵	Lennart Poettering
	creating a symlink
2014-06-17	install: various modernizations	Lennart Poettering

2014-06-17	install: teach preset query logic --root= support	Lennart Poettering

2014-06-17	install: beef up preset logic to limit to only enable or only disable, and ↵	Lennart Poettering
	do all-unit preset operations The new "systemctl preset-all" command may now be used to put all installed units back into the enable/disable state the vendor/admin encoded in preset files. Also, introduce "systemctl --preset-mode=enable-only" and "systemctl --preset-mode=disable-only" to only apply the enable or only the disable operations of a "systemctl preset" or "systemctl preset-all" operation. "systemctl preset-all" implements this RFE: https://bugzilla.redhat.com/show_bug.cgi?id=630174
2014-06-17	install: simplify and clarify disabling logic for instanced units	Lennart Poettering

2014-06-17	install: various modernizations	Lennart Poettering

2014-06-17	unit-name: various modernizations	Lennart Poettering

2014-06-17	unit-name: fix detection of unit templates/instances	Lennart Poettering
	We need to check for the last dot, not the first one in a unit name, for the suffix. Correct that.
2014-06-16	journal-remote: fix memleak	Thomas Hindoe Paaboel Andersen

2014-06-16	tests: unlink temp file used in test	Ronny Chevalier

2014-06-16	tests: add tests to test-hashmap	Ronny Chevalier
	add tests for: - hashmap_remove_and_put - hashmap_first_key - hashmap_last - hashmap_steal_first_key - hashmap_clear_free_free
2014-06-16	tests: add test-fdset	Ronny Chevalier

2014-06-16	tests: add test-socket-util	Ronny Chevalier

2014-06-16	networkd: unref tunnel	Susant Sahani
	Unref tunnel while shutting down
2014-06-16	networkd: introduce vxlan	Susant Sahani
	This patch enables netwokd to create vxlan Changes: Added: 1. File networkd networkd-vxlan.c 2. to netdev bool learning struct in_addr group uint64_t vxlanid; 3. VXLAN subsection and config parameters
2014-06-16	networkd: rename netdev variables	Susant Sahani
	Rename the netdev variables. Remove tunnel_ so that it can be reused .
2014-06-16	sd-rtnl: add support for vxlan rtnl attributes	Susant Sahani
	This patch adds vxlan rtnl attributes to sd-rtnl
2014-06-16	bus-proxy: policy - ignore unsupported tags and attributes	Kay Sievers

2014-06-16	Reset signal-mask on re-exec to init=..	Ruediger Oertel
	Process 1 (aka init) needs to be started with an empty signal mask. That includes the process 1 that's started after the initrd is finished. When the initrd is using systemd (as it does with dracut based initrds) then it is systemd that calls the real init. Normally this is systemd again, except when the user uses for instance "init=/bin/bash" on the kernel command line.
2014-06-16	util: add realloc_multiply() helper	David Herrmann
	This is similar to malloc_multiply() and friends. It is realloc() with a multiplication-overflow check.
2014-06-16	util: fix multiply-alloc helpers with size==0	David Herrmann
	Passing 0 to malloc() is not required to return NULL. Therefore, don't bail out if "b" is 0. This is not of importance to the existing helpers, but the upcoming realloc_multiply() requires this. To keep consistence, we keep the same behavior for the other helpers.