summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-07-29barrier: convert msecs to usecs in test-codeDavid Herrmann
Avoid using msecs in favor of usec_t. This is more consistent with the other parts of systemd and avoids the confusion between msec and usec. We always use usecs, end of story.
2014-07-29terminal/subterm: use usec_t instead of "unsigned long"David Herrmann
Avoid hard-coding "unsigned long" and use the usec_t type defined in src/shared.
2014-07-28networkd: route/address - use trivial hash functionsTom Gundersen
2014-07-28networkd: unify handling of stacked netdevsTom Gundersen
2014-07-28networkd: store ifindex as intTom Gundersen
2014-07-28sd-dhcp-server: add forcerenew supportTom Gundersen
2014-07-28sd-dhcp-client: add support for FORCERENEWTom Gundersen
This partially implements RFC3203. Note that we are not fully compliant as we do not support authentication.
2014-07-28sd-dhcp-client: listen on UDP socket as soon as a lease is acquiredTom Gundersen
This is necessary in order to listen for FORCERENEW events.
2014-07-28dhcp-network: enable IP_FREEBIND for UDP socketsTom Gundersen
This allows the sockets to be bound to a specific address before it is configured, also enable SO_REUSEADDR to allow multiple DHCP clients to run at the same time.
2014-07-28sd-dhcp-client: drop event DHCP_EVENT_NO_LEASETom Gundersen
Keep this internal to the client and simply restart it when NAK is receieved, as per the RFC.
2014-07-28sd-dhcp-client: only verify UDP messagesTom Gundersen
RAW messages are verified by the BPF in the kernel.
2014-07-28journald: always add syslog facility for messages coming from kmsgMichal Sekletar
Set SYSLOG_FACILITY field for kernel log messages too. Setting only SYSLOG_IDENTIFIER="kernel" is not sufficient and tools reading journal maybe confused by missing SYSLOG_FACILITY field for kernel log messages.
2014-07-27drop_duplicates: copy full BindMount structAnsgar Burchardt
At least t->ignore = f->ignore; is missing here. Just copy the full struct to be sure.
2014-07-27parse_boolean: require exact matchesAnsgar Burchardt
Require exact matches in all cases instead of treating strings starting with 't' ('f') as true (false). This is required for config_parse_protect_system to parse ProtectSystem=full correctly: it uses parse_boolean and only tries a more specific parsing function if that did not return a valid result. Thus "full" was treated as "false" before.
2014-07-27core: only set the kernel's timezone when the RTC runs in local timeKay Sievers
We can not reliably manage any notion of local time. Every daylight saving time change or time zone change by traveling will make the time jump, and the local time might jump backwards which creates unsolvable problems with file timestamps. We will no longer tell the kernel our local time zone and leave everything set to UTC. This will effectively turn FAT timestamps into UTC timestamps. If and only if the machine is configured to read the RTC in local time mode, the kernel's time zone will be configured, but systemd-timesysnc will disable the kernel's system time to RTC syncing. In this mode, the RTC will not be managed, and external tools like Windows bootups are expected to manage the RTC's time. https://bugs.freedesktop.org/show_bug.cgi?id=81538
2014-07-26Print kdbus path when opening failsZbigniew Jędrzejewski-Szmek
This makes it easier to debug what is going on.
2014-07-26update-done: include a short description in .updatedZbigniew Jędrzejewski-Szmek
People might be confused where the file comes from, since the name is not at all specific. https://bugzilla.redhat.com/show_bug.cgi?id=1121301#c8
2014-07-26Add utility function to append root to pathZbigniew Jędrzejewski-Szmek
2014-07-26systemctl: do not bother to mutate state on errorZbigniew Jędrzejewski-Szmek
We will abort anyway.
2014-07-26analyze: fix seg-fault with no cl-argumentDaniel Buch
We need to check if argv[1] is set before compare
2014-07-26Always check asprintf return codeKarel Zak
There is a small number of the places in sources where we don't check asprintf() return code and assume that after error the function returns NULL pointer via the first argument. That's wrong, after error the content of pointer is undefined.
2014-07-25busname: CLD_KILLED was used twiceLukas Nykryn
2014-07-25bus-proxyd: fix incorrect comparisonLukas Nykryn
We should be interested in k variable.
2014-07-25bus-proxyd: fix incorrect comparisonLukas Nykryn
Err can't be bigger then zero. Rest of the code uses negative Exxxx values.
2014-07-25networkd: ipv4ll - default to setting up ipv4ll routesTom Gundersen
This is necessary for non-ipv4ll hosts to communicate with ipv4ll-only hosts on the same link. Defaults to being enabled, but can be opted out. See: <http://avahi.org/wiki/AvahiAutoipd#Routes>
2014-07-25networkd: ipv4ll - drop unnecessary get_address()Tom Gundersen
2014-07-24udev: exclude MD from block device ownership event lockingKay Sievers
MD instantiates devices at open(). This is incomptible with the locking logic, as the "change" event emitted when stopping a device will bring it back.
2014-07-24libsystemd-network: use CLOCK_BOOTTIME instead of CLOCK_MONOTONIC where possibleTom Gundersen
The timeouts in the networking library (DHCP lease timeouts and similar) should not be affected by suspend. In the cases where CLOCK_BOOTTIME is not implemented, it is still safe to fallback to CLOCK_MONOTONIC, as the consumers of the library (i.e., networkd) _should_ renew the leases when coming out of suspend.
2014-07-24time-util: add clock_boottime_or_monotonicTom Gundersen
CLOCK_BOOTTIME is not supported by timerfd on older kernels, so for the time beeing, use this helper instead which will fallback to CLOCK_MONOTONIC if CLOCK_BOOTTIME is not supported.
2014-07-24sd-event: add support for CLOCK_BOOTTIMETom Gundersen
This requires a very recent kernel (3.15), so care should be taken when using this functionality.
2014-07-23sd-network: expose DNS/NTP servers as stringsTom Gundersen
This avoids having to distinguish between IPv4 and IPv6, allowing us to keep their internal orderings. The consumers now has to turn the strings into addresses.
2014-07-23resolved: don't read DHCP leasesTom Gundersen
networkd will expose both statically configured DNS servers and servers receieved over DHCP in sd_network_get_dns(), so no need to keep the distinction in resolved.
2014-07-23networkd: merge DNS and NTP entries when exportingTom Gundersen
In the state files, do not distinguish where the various entries came from (static or DHCP), but include them all in the same list.
2014-07-23dhcp-network: remove unused DHCP6_STATE_RSDan Williams
Probably a left-over from when router solicitations were requested in the DHCP6 code. But since they are now separate, this state is no longer needed.
2014-07-23networkd: set route protocolDan Williams
All routes added by networkd are currently set RTPROT_BOOT, which according to the kernel means "Route installed during boot" (rtnetlink.h). But this is not always the case as networkd changes routing after boot too. Since the kernel gives more detailed protocols, use them. With this patch, user-configured static routes now use RTPROT_STATIC (which they are) and DHCP routes use RTPROT_DHCP. There is no define for IPv4LL yet, so those are installed as RTPROT_STATIC (though perhaps RTPROT_RA is better?). [tomegun: fixup src/network/networkd-link.c:972:33: error: too few arguments to function 'route_new_dynamic']
2014-07-23resolved: most DNS servers can't handle more than one question per packet, ↵Lennart Poettering
hence let's not generate that
2014-07-23resolved: implement negative cachingLennart Poettering
2014-07-23resolved: rework logic so that we can share transactions between queries of ↵Lennart Poettering
different clients
2014-07-23nss-myhostname: don't include assert.h twiceLennart Poettering
2014-07-21Merge systemd-verify with systemd-analyzeZbigniew Jędrzejewski-Szmek
2014-07-21Add IFLA_VTI defines to missing.hJean-André Santoni
2014-07-21update-done: set proper selinux context for .updatedZbigniew Jędrzejewski-Szmek
https://bugzilla.redhat.com/show_bug.cgi?id=1121806
2014-07-21sysusers: fix selinux context of backup filesZbigniew Jędrzejewski-Szmek
Also, fix fopen_temporary_label to set proper context. By chance, all users so far used the same context, so the error didn't matter. Also, check return value from label_init(). https://bugzilla.redhat.com/show_bug.cgi?id=1121806
2014-07-21networkd: bridge - use USEC_PER_MSEC macrosTom Gundersen
Lennart said: > We have these nice USEC_PER_MSEC-style macro definitions which make it a > little bit clearer what we are converting here from what into > what... please use that instead of writing "1000"... > > (we stole those from gstreamer btw)
2014-07-21networkd: add support for bond optionsSusant Sahani
The following bond options are supported by this patch. MIIMonitorSec: Specifies the frequency in milli-seconds that MII link monitoring will occur. UpDelaySec: Specifies the delay time in milli-seconds to enable a link after a link up status has been detected. DownDelaySec: Specifies the delay time in milli-seconds to disable a link after a link failure has been detected. changes: 1. Added gconf variables. 2. man page conf: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad TransmitHashPolicy=layer2+3 LacpduTransmitRate=fast MIIMonitorSec=1s UpDelaySec=2s DownDelaySec=8s cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 1000 Up Delay (ms): 2000 Down Delay (ms): 8000 802.3ad info LACP rate: fast Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: rephrased manpage, dropped bond_ prefix from variables]
2014-07-21networkd: bond add support for lacp rateSusant Sahani
LacpduTransmitRate option specifies the rate in which link partner to transmit LACPDU packets in 802.3ad mode. Possible values slow : Request partner to transmit LACPDUs every 30 seconds fast : Request partner to transmit LACPDUs every 1 second The default is slow. chages: 1. Added enum bond_lacp_rate_table 2. gperf LacpduTransmitRate Test: conf file: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad LacpduTransmitRate=fast test: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: fast Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: renamed from LacpduTransmitRate to LACPTransmitRate, manpage fixes and dropped bond_ prefix from variables]
2014-07-21networkd: add support for bond transmit hash policySusant Sahani
This patch adds support the transmit hash policy to use for slave selection in balance-xor, 802.3ad, and tlb modes layer2, layer3+4, layer2+3, encap3+4, encap3+4 Added: 1. BondXmitHashPolicy 2. conf param TransmitHashPolicy Test conf: [NetDev] Name=bond1 Kind=bond [Bond] Mode=802.3ad TransmitHashPolicy=layer2+3 test output: cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2+3 (2) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Min links: 0 Aggregator selection policy (ad_select): stable bond bond1 has no active aggregator [tomegun: dropped bond_ prefix from new Bond variable, drop repeated man-page section]
2014-07-21sd-rtnl: uncomment bond rtnl constantsSusant Sahani
2014-07-21networkd: netdev - split NetDev struct into per-kind structsTom Gundersen
Similarly to how unit types work.
2014-07-21sd-network: drop get_ifindicesTom Gundersen
People should use rtnl for this, and then only query sd-network by the ifindices it finds.