| Age | Commit message (Collapse) | Author |
|---|
|
extra "#" to the name
That way, we have a simple, somewhat reliable way to detect such
temporary files, by simply checking if they start with ".#".
|
|
EOF is meaningless if the direction of iteration changes.
Move the EOF optimization under the direction check.
This fixes test-journal-interleaving for me.
Thanks to Filipe Brandenburger for telling me about the failure.
|
|
next_with_matches() is odd in that its "unit64_t *offset" parameter is
both input and output. In other it's purely for output.
The function is called from two places in next_beyond_location(). In
both of them "&cp" is used as the argument and in both cases cp is
guaranteed to equal f->current_offset.
Let's just have next_with_matches() ignore "*offset" on input and
operate with f->current_offset.
I did not investigate why it is, but it makes my usual benchmark run
reproducibly faster:
$ time ./journalctl --since=2014-06-01 --until=2014-07-01 > /dev/null
real 0m4.032s
user 0m3.896s
sys 0m0.135s
(Compare to preceding commit, where real was 4.4s.)
|
|
I accidentally broke the detection of duplicate entries in 7943f42275
"journal: optimize iteration by returning previously found candidate
entry".
When we have a known location of a candidate entry, we must not return
from next_beyond_location() immediately. We must go through the
duplicates detection to make sure the candidate differs from the
already iterated entry.
This fix slows down iteration a bit, but it's still faster than it
was before the rework.
$ time ./journalctl --since=2014-06-01 --until=2014-07-01 > /dev/null
real 0m4.448s
user 0m4.298s
sys 0m0.149s
(Compare with results from commit 7943f42275, where real was 5.3s before
the rework.)
|
|
|
|
|
|
|
|
This patch integrates LLDP with networkd.
Example conf:
file : lldp.network
[Match]
Name=em1
[Network]
LLDP=yes
|
|
This patch introduces LLDP support to networkd. it implements the
receiver side of the protocol.
The Link Layer Discovery Protocol (LLDP) is an industry-standard,
vendor-neutral method to allow networked devices to advertise
capabilities, identity, and other information onto a LAN. The Layer 2
protocol, detailed in IEEE 802.1AB-2005.LLDP allows network devices
that operate at the lower layers of a protocol stack (such as
Layer 2 bridges and switches) to learn some of the capabilities
and characteristics of LAN devices available to higher
layer protocols.
|
|
|
|
|
|
|
|
containers and install them locally
This adds a simply but powerful tool for downloading container images
from the most popular container solution used today. Use it like
this:
# systemd-import pull-dck mattdm/fedora
# systemd-nspawn -M fedora
This will donwload the layers for "mattdm/fedora", and make them
available locally as /var/lib/container/fedora.
The tool is pretty complete, as long as it's only about pulling down
images, or updating them. Pushing or searching is not supported yet.
|
|
We should move loginctl, timedatectl, machinectl over to use this new
API instead of a manual one.
|
|
deleting it)
|
|
|
|
rm_rf_dangerous() needlessly
|
|
|
|
The handling of the command name and other arguments is unified. This
simplifies things and should make them more predictable for users.
Incidentally, this makes ExecStart handling match the .desktop file
specification, apart for the requirment for an absolute path.
https://bugs.freedesktop.org/show_bug.cgi?id=86171
|
|
Commit a2a5291b3f5 changed the parser to reject unfinished quoted
strings. Unfortunately it introduced an error where a trailing
backslash would case an infinite loop. Of course this must fixed, but
the question is what to to instead. Allowing trailing backslashes and
treating them as normal characters would be one option, but this seems
suboptimal. First, there would be inconsistency between handling of
quoting and of backslashes. Second, a trailing backslash is most
likely an error, at it seems better to point it out to the user than
to try to continue.
Updated rules:
ExecStart=/bin/echo \\ → OK, prints a backslash
ExecStart=/bin/echo \ → error
ExecStart=/bin/echo "x → error
ExecStart=/bin/echo "x"y → error
|
|
|
|
|
|
|
|
|
|
This fixes 2 problems introduced by 6feeeab0bc:
1) If name_to_handle_at returns ENOSYS for the child, we'll wrongly
return -ENOSYS when it returns the same for the parent. Immediately
jump to the fallback logic when we get ENOSYS.
2) If name_to_handle_at returns EOPNOTSUPP for the child but suceeds
for the parent, we'll be comparing an uninitialized value (mount_id) to
an initialized value (mount_id_parent). Initialize the mount_id
variables to invalid mount_ids to avoid this.
|
|
This pulls out the hwdb managment from udevadm into an independent tool.
The old code is left in place for backwards compatibility, and easy of
testing, but all documentation is dropped to encourage use of the new
tool instead.
|
|
|
|
Now that journal_file_next_entry() does not need a pointer to the
current object, next_with_matches() does not need it either.
|
|
The current offset is sufficient information.
|
|
In next_beyond_location() when the JournalFile's location type is
LOCATION_SEEK, it means there's nothing to do, because we already have
the location of the candidate entry. Do an early return. Note that now
next_beyond_location() does not anymore guarantee on return that the
entry is mapped, but previous patches made sure the caller does not
care.
This optimization is at least as good as "journal: optimize iteration:
skip files that cannot improve current candidate entry" was.
Timing results on my workstation, using:
$ time ./journalctl -q --since=2014-06-01 --until=2014-07-01 > /dev/null
Before "Revert "journal: optimize iteration: skip files that cannot
improve current candidate entry":
real 0m5.349s
user 0m5.166s
sys 0m0.181s
Now:
real 0m3.901s
user 0m3.724s
sys 0m0.176s
|
|
If from a previous iteration we know we are at the end of a journal
file, don't bother looking into the file again. This is complicated by
the fact that the EOF does not have to be permanent (think of
"journalctl -f"). So we also check if the number of entries in the
journal file changed.
This optimization has a similar effect as "journal: optimize iteration:
skip whole files behind current location" had.
|
|
offset is redundant, because the caller can rely on f->current_offset.
The object pointer the function saves in *ret is thrown away by the caller.
|
|
The file's current_offset is already updated at this point, so let's use
it.
|
|
When comparing the locations of candidate entries, we can rely on the
location information stored in struct JournalFile.
|
|
set_location() is called from real_journal_next() when a winning entry
has been picked from among the candidates in journal files.
The location type is always set to LOCATION_DISCRETE. No need to pass
it as a parameter.
The per-JournalFile location information is already updated at this
point. No need for having the direction and offset here.
|
|
In next_beyond_location() when we find a candidate entry in a journal
file, save its location information in struct JournalFile.
The purpose of remembering the locations of candidate entries is to be
able to save work in the next iteration. This patch does only the
remembering part.
LOCATION_SEEK means the location identifies a candidate entry.
When a winner is picked from among candidates, it becomes
LOCATION_DISCRETE.
LOCATION_TAIL here signifies we've iterated the file to the end (or the
beginning in the case of reversed direction).
|
|
|
|
In preparation for individual JournalFiles maintaining a location
of their own.
|
|
This reverts commit b7c88ab8cc7d55a43450bf3dea750f95f2e910d6.
This optimization will be made redundant by the following patches.
|
|
candidate entry"
This reverts commit f8b5a3b75fb55f0acb85c21424b3893c822742e9.
This optimization will be made redundant by the following patches.
|
|
Its only caller is a test.
|
|
|
|
fork() is not async-signal-safe and calling it from the signal handler
could result in a deadlock when at_fork() handlers are called. Using
the raw clone() syscall sidesteps that problem.
The tricky part is that raise() does not work, since getpid() does not
work. Add raw_getpid() to get the real pid, and use kill() instead of
raise().
https://bugs.freedesktop.org/show_bug.cgi?id=86604
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=87393
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=87393
|
|
If child supports, but the parent does not, or when the child does
not support, but the parent does, assume the child is a mount point.
Only if neither supports use the fallback.
|
|
c0e57ba9e22ee937722958d8b912ade2a37f206d fixed the fallback path.
We should do the same for name_to_handle_at().
|
|
|
|
dup3() allows setting O_CLOEXEC which we are not interested in. However,
it also fails if called with the same fd as input and output, which is
something we don't want. Hence use dup2().
Also, we need to explicitly turn off O_CLOEXEC for the fds, in case the
input fd was O_CLOEXEC and < 3.
|
|
host to container during runtime
|
