summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-05-22logind: also escape external data when saving to /runLennart Poettering
Better be safe than sorry...
2014-05-22machine: escape fields we store in /run, so that they can be properly ↵Lennart Poettering
unescaped by parse_env_file()
2014-05-22nspawn: allow to bind mount journal on top of a non empty container journal ↵Djalal Harouni
dentry Currently if nspawn was called with --link-journal=host or --link-journal=auto and the right /var/log/journal/machine-id/ exists then the bind mount the subdirectory into the container might fail due to the ~/mycontainer/var/log/journal/machine-id/ of the container not being empty. There is no reason to check if the container journal subdir is empty since there will be a bind mount on top of it. The user asked for a bind mount so give it. Note: a next call with --link-journal=guest may fail due to the /var/log/journal/machine-id/ on the host not being empty. https://bugs.freedesktop.org/show_bug.cgi?id=76193 Reported-by: Tobias Hunger <tobias.hunger@gmail.com>
2014-05-22cgroups: always propagate controller membership to siblings, for all controllersLennart Poettering
This is the behaviour the kernel cgroup rework exposes for all controllers, hence let's do this already now for all cases.
2014-05-22cgroup: rework startup logicLennart Poettering
Introduce a (unsigned long) -1 as "unset" state for cpu shares/block io weights, and keep the startup unit set around all the time.
2014-05-22core: add startup resource control optionWaLyong Cho
Similar to CPUShares= and BlockIOWeight= respectively. However only assign the specified weight during startup. Each control group attribute is re-assigned as weight by CPUShares=weight and BlockIOWeight=weight after startup. If not CPUShares= or BlockIOWeight= be specified, then the attribute is re-assigned to each default attribute value. (default cpu.shares=1024, blkio.weight=1000) If only CPUShares=weight or BlockIOWeight=weight be specified, then that implies StartupCPUShares=weight and StartupBlockIOWeight=weight.
2014-05-22Revert "update gitignore"Kay Sievers
This reverts commit 351efdc7a4d900a1aebca517dd0b46b89cdd7306.
2014-05-21sd-dhcp-client: factor out dhcp packet allocationTom Gundersen
2014-05-21sd-dhcp: rely on FIONREAD workingTom Gundersen
This fallback will anyway never get tested, so rip it out.
2014-05-21sd-dhcp: option_append - support falling back to 'sname' and 'file'Tom Gundersen
2014-05-21sd-dhcp: make sure we can not fill options so much that there is no space ↵Tom Gundersen
for END
2014-05-21networkd: link - serialize link when addresses changeTom Gundersen
Thanks to Kay for tracking this down.
2014-05-21update gitignoreKay Sievers
2014-05-21util: fix a gcc compiler warningLennart Poettering
2014-05-21timesyncd: use STR_IN_SET()Kay Sievers
2014-05-21timesyncd: fix english language typoLennart Poettering
2014-05-21logind: don't apply RemoveIPC= to system usersLennart Poettering
We shouldn't destroy IPC objects of system users on logout. http://lists.freedesktop.org/archives/systemd-devel/2014-April/018373.html This introduces SYSTEM_UID_MAX defined to the maximum UID of system users. This value is determined compile-time, either as configure switch or from /etc/login.defs. (We don't read that file at runtime, since this is really a choice for a system builder, not the end user.) While we are at it we then also update journald to use SYSTEM_UID_MAX when we decide whether to split out log data for a specific client.
2014-05-20dhcp-lease: add support for parsing a few more dhcp optionsTom Gundersen
2014-05-20dhcp-lease: refactor lease parsingTom Gundersen
Use helper functions, and add some more sanity checking/asserts.
2014-05-20sd-dhcp: refactor parse_optionsTom Gundersen
Similar to the previous patch, exchange a length and a pointer with only one offset variable. Also fix the type of the options to be uint8_t[], rather than uint8_t*.
2014-05-20sd-dhcp: refactor dhcp_option_appendTom Gundersen
Store a pointer to the options in the DHCPMessage struct, and pass this together with an offset around, rather than a uint8_t**. This avoids us having to (re)compute the pointer; and changes dhcp_option_append from adjusting both the pointer to the next option and the remaining size of the options, to just adjusting the current offset. This makes the code a bit simpler to follow IMHO, but there should be no functional change.
2014-05-21timesyncd: save clock to disk everytime we get an NTP fix, and bump clock at ↵Lennart Poettering
boot using this This is useful to make sure the system clock stays monotonic even on systems that lack an RTC. Also, why we are at it, also use the systemd release time for bumping the clock, since it's a slightly less bad than starting with jan 1st, 1970. This also moves timesyncd into the early bootphase, in order to make sure this initial bump is guaranteed to have finished by the time we start real daemons which might write to the file systemd and thus shouldn't leave 1970's timestamps all over the place...
2014-05-20udevadm-settle: fixed return code for empty queueHarald Hoyer
If the udev queue is empty and "/run/udev/queue" does not exist, "udevadm settle" would return with EXIT_FAILURE, because the inotify on "/run/udev/queue" would fail with ENOENT. This patch lets "udevadm settle" exit with EXIT_SUCCESS in this case.
2014-05-19networkd: introduce sit tunnelSusant Sahani
This patch introduces sit tunnel support to networkd Example conf: file: sit.netdev [NetDev] Name=sit-tun Kind=sit MTUBytes=1480 [Tunnel] Local=10.65.223.238 Remote=10.65.223.239 file: sit.network [Match] Name=em1 [Network] Tunnel=sit-tun [tomegun: rebased]
2014-05-19networkd-wait-online: wait for addresses to be configuredTom Gundersen
2014-05-19timesyncd: only attempt to connect when an address is configuredTom Gundersen
For now, we accept both link-local and routable addresses, maybe we want to restrict ourselves to routable addresses only.
2014-05-19networkd/sd-network: extend operational statesTom Gundersen
Expose states 'degraded' or 'routable' if a link has a site/link-local or a routable address, respectively.
2014-05-19networkd/sd-network: expose statically configured NTP serversTom Gundersen
2014-05-19networkd: fixup static DNS serializationTom Gundersen
2014-05-19sd-dhcp-lease/sd-network: modernization and fix leakTom Gundersen
2014-05-19resolved: add daemon to manage resolv.confTom Gundersen
Also remove the equivalent functionality from networkd.
2014-05-19sd-network: expose DNS informationTom Gundersen
2014-05-19networkd: link - serialize DNS informationTom Gundersen
2014-05-19sd-dhcp-lease: move in_addr (de)serialization to shared network codeTom Gundersen
2014-05-19sd-login: add C API to query primary session of a userLennart Poettering
2014-05-19logind: fix Display property of user objectsLennart Poettering
When we dropped support for creating a per-user to the "main" X11 display we stopped returning useful data in the "Display" user property. With this change this is fixed and we again expose an appropriate (graphical session) in the property that is useful as the "main" one, if one is needed.
2014-05-18gudev: add missing (nullable) annotations on return valuesEvan Nemerson
2014-05-19analyze: read host and system information from remoteDjalal Harouni
This makes "systemd-analyze plot" read host information from remote. While we are it show if this is a virtualized system. https://bugs.freedesktop.org/show_bug.cgi?id=76498 Reported-by: Zach <zachcook1991@gmail.com>
2014-05-19hostnamed: expose KernelVersion on the busDjalal Harouni
This is needed to fix bug: https://bugs.freedesktop.org/show_bug.cgi?id=76498 Reported-by: Zach <zachcook1991@gmail.com>
2014-05-19core: Filter by state behind the D-Bus API, not in the systemctl client.David Strauss
2014-05-19machined: make sure GetMachineAddresses() is available for unprivileged ↵Lennart Poettering
processes
2014-05-19fix spelling of privilegeNis Martensen
2014-05-18machined: add logic to query IP addresses of containersLennart Poettering
2014-05-18timesyncd: make use of floating event sources for signal handlingLennart Poettering
2014-05-18timesyncd: enable watchdog supportLennart Poettering
2014-05-18timesyncd: run timesyncd as unpriviliged user "systemd-timesync" (but still ↵Lennart Poettering
with CAP_SYS_TIME)
2014-05-17networkd: log - only log about udev initalization on debug levelTom Gundersen
2014-05-17networkd: keep list of active addressesTom Gundersen
2014-05-17networkd: IP address equalityTom Gundersen
2014-05-17udev: avoid use of uninitialized errThomas Hindoe Paaboel Andersen
After 1ea972174baba40dbc80c51cbfc4edc49764b59b err is no longer set unless we hit a special case. Initialize it to 0 and remove a check that will never fail.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-29 01:15:52 +0000