| Age | Commit message (Collapse) | Author |
|---|
|
Spare few bytes and make typos less likely.
|
|
|
|
and /usr
This is necessary because the code originally defined paths assuming UDEV_LIBEXECDIR
was /usr prefixed, and also that udevrulesdir was located in /etc. Since (1) both of
these defaults have changed, and (2) they could be set to more or less anything, we
want to ensure that there is support for the standard paths as well, irrespective of
what UDEV_LIBEXECDIR and UDEV_RULES_DIR are set to.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Commit ff2c503df091e6e4e9ab48cdb6df6ec8b7b525d0 introduced accept4() into
udev, which broke compatibility with kernels older than Linux 2.6.32 (or
Linux 2.6.36 on ARM). The purpose of accept4() is to permit
O_NONBLOCK and O_CLOEXEC to be specified at the accept() call site
while previously, they had to be set using fcntl() because Linux does
not inherit them.
Since accept4() increases the minimum kernel version, we add a fallback
path for situations in which it is unavailable.
Reported-by: Stephen Klimaszewski <steev@gentoo.org>
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
The use of the eudev version in pkgconfig files caused build failures,
so we switch to the udev version for compatibility purposes.
Resolves gentoo/eudev#22
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
libgudev-1.0.la and gudev-1.0.gir fail to build because GCC cannot find the
needed header files (e.g. gudevenumtypes.h). To fix this, the include path
$(top_buildir)/src was added and 'gdev' was replaced with 'gudev' in all
relevant include paths.
|
|
This commit provides needed #define's that provide structures that
are found at configure time. It also reverts commit
91ce21b2d7978837b233e152ac63863a910eaf21
to avoid redefinitions of _GNU_SOURCE.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
This is a combination of commits:
bc7e89950323f635196c3c8eeebbe77af4307967
cde38f304f1cba616dfad4eb2608e8ec1a163f61
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
This is a combination of commits
67fd630e5fadeed8e0e96d396a9ebdc5f677fe98
f3666f76d5bf08572e001d1cee37e142b1a1be8f
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
This is a combination of commits
c9485bf12eafad22dbe316ccbf3a9506d4cace66
abd4a3a3bf5851f07cac6665f35c8b92279c4a47
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
|
|
|
|
When run, 'make distcheck' verifies that no files remain in the build directory.
However, 'make distcheck' does not automatically delete $(BUILT_SOURCES) by
default which causes this check to fail. Adding $(BUILT_SOURCS) to CLEANFILES
corrects this behavior.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
|
|
|
|
This commit makes sure that src/gudev/gudevprivate.h is included
in the distribution, fixing a failure in building gudev with
`make distcheck`. There's also some code cleanup and migration
of all configurable paths to the main configure.ac file.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
This commit the related issues of building gudev with/out
introspection. It draws on suggestions from nvinson in
https://github.com/gentoo/eudev/pull/20
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
We move the test-udev.c and test-libudev.c from src/test to test.
This corrects the a problem with hard coded relative paths finding
the test/test/sys directory created by test/udev-test.pl.
This commit draws heavily from nvinson patch in
https://github.com/gentoo/eudev/pull/20
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
This commit is a continuation of the previous one in which all the configured
paths obtained in configure.ac are propagated to the Makefile.am and .c files
via AM_CPPFLAGS of the form -DUDEV_CONF_FILE=\"$(udevconffile)\". This should
address the issue in
https://github.com/gentoo/eudev/issues/17
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
The configuration of the installation paths for various components
was scattered between the main configure.ac file and the various
Makefile.am's. These components are: udev config file, hwdb, keymaps
and force-release keymaps and the rules. This commit consolidates
them all into one point in configure.ac and anticipates the inclusion
of new AM_CPPFLAGS of the form -DHWDB_BIN=@udevhwdbdir@ as upstream
has done, so it is easier to address issues like:
https://github.com/gentoo/eudev/issues/17
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
The directory containing libudev.h was absent from search paths provided
to the preprocessor.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
Inspired by e30431623a7d871da123cc37055ac49abf2c20ea from systemd.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
We support module loading through modprobe when libkmod is neither
available nor wanted.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
This opens the door to using disabling the use of kmod from autotools.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
This is useful in situations where we do not have builtins avaiable.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
The keys/keymap test preformed by src/keymap/check-keymaps.sh must
find both keys.txt and the keymap directory. When building out of
the source tree, eg when doing `make distcheck`, these are located
at ${top_builddir}/src/keymap/keys.txt and ${top_srcdir}/keymap/,
respectively. This patch fixes the build so that these are now
correctly found.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
${rootlibdir}/udev instead of ${root}/lib/udev
|
|
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
This adds /lib if split-usr is enabled
to the directories where udev searches for rules.d.
This is needed if split-usr is enabled because some software still
installs rules in /lib/udev/rules.d.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
It is possible for udev_hwdb_get_properties_list_entry to be invoked
during udevd initialization before hwdb has been initialized. We
workaround that for now by introducing a check to handle that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Commit-message-by: Richard Yao <ryao@gentoo.org>
|
|
This commit reintroduces code to
1) build src/keymap
2) test keymap/Makefile.am that it has all the key maps listed
3) test that all the key names in keymap/* are in <linux/input.h>
4) do a syntax check on rules/*.rules which now includes
95-keymap.rules and 95-keyboard-force-release.rules
For #4, the regex expressions in rule-syntax-check.py had to be
updated. They do not allow trailing comments via # comment, and
I did not include that. A rule in 95-keymap.rules had to have its
comment moved from the end to another line.
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
The build failure that prompted its removal has been resolved.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
not available
|
|
A last minute change to commit 189d09a42e054bebd91ea9690fede33b41996260
caused a build failure. This fixes it.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
unshare() is a linux syscall that we need. Unfortunately, access to it
depends on __GNU_SOURCE, which we would like to avoid. As such, we
define a macro to invoke it by its syscall code. This is necessary to
avoid the following warning from Clang:
implicit declaration of function 'unshare' is invalid in C99
[-Wimplicit-function-declaration]
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
Clang 3.1 indicated that we had implicitly declared several, which is
illegal in C99.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
Clang 3.1 warned that "attribute 'packed' is ignored". This stems from
placing "__attribute__ ((packed))" at the start of structure
declarations when common practice is to place it at the end.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
|
|
|
|
|
|
|
|
If firmware file is not found in the file system, udev
terminates firmware loading. This is not the case if
firmware file exists in the file system but doesn't have
any data in it.
|
|
This fixes a build failure with --disable-acl
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
|
|
Changes to rules were introduced by
7c2dee4a4d7f1b264031daaee786a8fe429884e1 while builtin-blkid support was
introduced in other commits. The removal of systemd resulted in this
code causing linker errors. This code adds complexity with no clear
benefit, so we remove it.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
|
Changes to rules were introduced by
06316d9f1a91b4d3efdb7402e72498cb3deb1806 while kmod support was
introduced in other commits. A ton of commits were made involving kmod
and it is quite clear that it is broken, so we remove it.
This changes our rules to depend on modprobe. As long as the modprobe
binary is in /, and not /usr, udev module loading should function
properly.
Signed-off-by: Richard Yao <ryao@gentoo.org>
|
