| Age | Commit message (Collapse) | Author |
|---|
|
This is now the recommended way to do monitoring by upstream D-Bus.
It's also allowed in the default policy, whereas eavesdrop is not
anymore, which effectively broke busctl on many systems.
|
|
unit_set_slice() fails with -EBUSY if the unit already has a slice associated
with it. This makes it impossible to override slice through dropin config or
over dbus. There's no reason to disallow slice changes as long as cgroups
aren't realized. Fix it.
Fixes #3240.
Signed-off-by: Tejun Heo <htejun@fb.com>
Reported-by: Davide Cavalca <dcavalca@fb.com>
|
|
Drop all dangling old /dev mounts before mounting a new private /dev tree.
|
|
|
|
This new method returns information by unit names. Instead of ListUnitsByPatterns
this method returns information of inactive and even unexisting units.
Moved dbus unit reply logic into a separate shared function.
Resolves https://github.com/coreos/fleet/pull/1418
|
|
Add a synchronization point so that custom initramfs units can run
after the root device becomes available, before it is fsck'd and
mounted.
This is useful for custom initramfs units that may modify the
root disk partition table, where the root device is not known in
advance (it's dynamically selected by the generators).
|
|
Desktop environments can keep this property up to date to allow
applications to easily track session's Lock status.
|
|
We need to be sure that the size returned here actually matches what we will read with recvmsg() next
Fixes #2984
|
|
Fix "preset-all" with dangling symlinks and install-section hint emitted too eagerly
|
|
_const_ means that the caller can assume that the function will return the same
result every time (and will not modify global memory). special_glyph() meets
this: even though it depends on global memory, that part of global memory is
not expected to change. This allows the calls to special_glyph() to be
optimized, even if -flto is not used.
|
|
That function doesn't draw anything on it's own, just returns a string, which
sometimes is more than one character. Also remove "DRAW_" prefix from character
names, TREE_* and ARROW and BLACK_CIRCLE are unambigous on their own, don't
draw anything, and are always used as an argument to special_glyph().
Rename "DASH" to "MDASH", as there's more than one type of dash.
|
|
It's quite a bit shorter and just as readable.
(The full sentence with "pointing to" was added to replace a text that used
"ln -s %s %s". Using the "ln" syntax is indeed unclear, because it's not
obvious which is the source and which is the target, and because symlink(2)
uses the opposite order to ln(1). But with the unicode arrow there should
be no ambiguity.)
|
|
Executing 'systemctl enable' on the same unit twice would cause
a warning about a missing [Install] section to be printed. To avoid
this, count all symlinks that "would" be created, and return 1
no matter if we actually created a symlink or skipped creation because
it already exists.
|
|
This fixes 'preset-all' with a unit that is a dangling symlink.
$ systemctl --root=/ preset-all
Unit syslog.service is an alias to a unit that is not present, ignoring.
Unit auditd.service is masked, ignoring.
Unit NetworkManager.service is masked, ignoring.
|
|
$ systemctl --root=/ preset foobar.service
Cannot find unit foobar.service.
Failed to preset: No such file or directory.
$ systemctl --root=/ preset foobar@.service
Cannot find unit foobar@.service.
Failed to preset: No such file or directory.
$ systemctl --root=/ preset foobar@blah.service
Cannot find unit foobar@blah.service or foobar@.service.
Failed to preset: No such file or directory.
|
|
Let's make sure we don't remove veth links that existed before nspawn was
invoked.
https://github.com/systemd/systemd/pull/3209#discussion_r62439999
|
|
Fix-up for 93e2822684b37a4eeef03775a7a1f44a3055d7b2
|
|
This allows selecting the propagation level of emitted LLDP packets
(specifically: the destination MAC address of the packets). This is useful
because it allows generating LLDP packets that optionally cross certain types
of bridges.
See 802.11ab-2009, Table 7-1 for details.
|
|
|
|
This adds a new concept of network "zones", which are little more than bridge
devices that are automatically managed by nspawn: when the first container
referencing a bridge is started, the bridge device is created, when the last
container referencing it is removed the bridge device is removed again. Besides
this logic --network-zone= is pretty much identical to --network-bridge=.
The usecase for this is to make it easy to run multiple related containers
(think MySQL in one and Apache in another) in a common, named virtual Ethernet
broadcast zone, that only exists as long as one of them is running, and fully
automatically managed otherwise.
|
|
Make use of this in nspawn at a couple of places. A later commit should port
more code over to this, including networkd.
|
|
don't reopen socket fds when reloading the daemon
|
|
|
|
|
|
more dhcp fixes
|
|
Cgroup fixes.
|
|
News and other small cleanups
|
|
core: use an AF_UNIX/SOCK_DGRAM socket for cgroup agent notification
|
|
"0 units listed." is still printed.
|
|
Coverity was complaing, but it was a false positive (CID #1354669).
Nevertheless, it's better to rewrite the code so that units is never
null.
|
|
|
|
Before:
$ systemctl show --property TriggerLimitIntervalSec test.socket
TriggerLimitIntervalSec=2000000
After:
$ systemctl show --property TriggerLimitIntervalUSec test.socket
TriggerLimitIntervalUSec=2s
|
|
Fixes: #3194
|
|
It's only relevant to DHCP, and it should be where the DUID is configured too.
|
|
|
|
Previously, we'd simply close and reopen the socket file descriptors. This is
problematic however, as we won't transition through the SOCKET_CHOWN state
then, and thus the file ownership won't be correct for the sockets.
Rework the flushing logic, and actually read any queued data from the sockets
for flushing, and accept any queued messages and disconnect them.
|
|
Previously, when the daemon was reloaded and the configuration of a socket unit
file was changed so that a different set of socket ports was defined for the
socket we'd simply reopen the socket fds not yet open. This is problematic
however, as this means the SOCKET_CHOWN state is not run for them, and thus
their UID/GID is not corrected.
With this change, don't open the missing file descriptors, but log about this
issue, and ask the user to restart the socket explicit, to make sure all
missing fds are opened.
Fixes: #3171
|
|
This should bring no behavioural change.
|
|
networkd lib: cleanup FOREACH_WORD
|
|
|
|
|
|
|
|
change trigger timeout defaults
|
|
|
|
For similar reasons as the recent addition of a limit on sessions.
Note that we don't enforce a limit on inhibitors per-user currently, but
there's an implicit one, since each inhibitor takes up one fd, and fds are
limited via RLIMIT_NOFILE, and the limit on the number of processes per user.
|
|
|
|
If we have a lot of simultaneous sessions we really shouldn't send the full
list of active sessions with each PropertyChanged message for user and seat
objects, as that can become quite substantial data, we probably shouldn't dump
on the bus on each login and logout.
Note that the global list of sessions doesn't send out changes like this
either, it only supports requesting the session list with ListSessions().
If cients want to get notified about sessions coming and going they should
subscribe to SessionNew and SessionRemoved signals, and clients generally do
that already.
This is kind of an API break, but then again the fact that this was included
was never documented.
|
|
Let's make sure we process session and inhibitor pipe fds (that signal
sessions/inhibtors going away) at a higher priority
than new bus calls that might create new sessions or inhibitors. This helps
ensuring that the number of open sessions stays minimal.
|
|
We really should put limits on all resources we manage, hence add one to the
number of concurrent sessions, too. This was previously unbounded, hence set a
relatively high limit of 8K by default.
Note that most PAM setups will actually invoke pam_systemd prefixed with "-",
so that the return code of pam_systemd is ignored, and the login attempt
succeeds anyway. On systems like this the session will be created but is not
tracked by systemd.
|
|
The unit file settings are called SocketUser= and SocketGroup= hence name these
fields that way in the "systemd-analyze dump" output too.
https://github.com/systemd/systemd/issues/3171#issuecomment-216216995
|
