| Age | Commit message (Collapse) | Author |
|---|
|
currently if a dhcp server sends more than one router, sd-dhcp-lease
does not copy the ip because it assumes it will only ever be 4 bytes. a
dhcp server could send more than one ip in the router list, so we should
copy the first one and ignore the rest of the bytes.
|
|
Right now, if you're already in a session and call CreateSession, we
return information about the current session of yours. This is highy
confusing and a nasty hack. Avoid that, and instead return a commonly
known error, so the caller can detect that.
This has the side-effect, that we no longer override XDG_VTNR and XDG_SEAT
in pam_systemd, if you're already in a session. But this sounds like the
right thing to do, anyway.
|
|
Old gdm and lightdm start the user-session during login before they
destroy the greeter-session. Therefore, the user-session will take over
the VT from the greeter. We recently prevented this by never allowing
multiple sessions on the same VT. Fix this now, by explicitly allowing
this if the owning session is a GREETER.
Note that gdm no longer behaves like this. Instead, due to wayland, they
always use a different VT for each session. All other login-managers are
highly encouraged to destroy the greeter-session _before_ starting the
user-session. We now work around this, but this will probably not last
forever (and will already have nasty side-effects on the greeter-session).
|
|
|
|
Login small cleanup
|
|
|
|
! is supposed to be used for booleans and pointers.
|
|
|
|
richardmaw-codethink/nspawn-automatic-uid-shift-fix-v2
nspawn: Communicate determined UID shift to parent version 2
|
|
- Make sure that the IPv6PrivacyExtensions=yes results in
prefer-temporary, not prefer-public.
- Introduce special enum value "kernel" to leave setting unset, similar
how we have it for the IP forwarding settings.
- Bring the enum values in sync with the the strings we parse for them,
to the level this makes sense (specifically, rename "disabled" to
"no", and "prefer-temporary" to "yes").
- Make sure we really set the value to to "no" by default, the way it is
already documented in the man page.
- Fix whitespace error.
- Make sure link_ipv6_privacy_extensions() actually returns the correct
enum type, rather than implicitly casting it to "bool".
- properly size formatting buffer for ipv6 sysctl value
- Don't complain if /proc/sys isn't writable
- Document that the enum follows the kernel's own values (0 = off, 1 =
prefer-public, 2 = prefer-temporary)
- Drop redundant negating of error code passed to log_syntax()
- Manpage fixes
This fixes a number of issues from PR #417
|
|
networkd: be more defensive when writing to ipv4/ipv6 forwarding sett…
|
|
|
|
|
|
Right now, we never install destination matches on kdbus as the kernel did
not support MATCH rules on those. With the introduction of
KDBUS_ITEM_DST_ID we can now match on destination IDs, so add explicit
support for those.
This requires a recent kdbus module to work. However, there seems to be no
user-space that uses "Destination=''" matches, yet, so old kdbus modules
still work fine (we couldn't find any real user).
This is needed to match on unicast signals in bus-proxy. A followup will
add support for this.
|
|
There is logic to determine the UID shift from the file-system, rather
than having it be explicitly passed in.
However, this needs to happen in the child process that sets up the
mounts, as what's important is the UID of the mounted root, rather than
the mount-point.
Setting up the UID map needs to happen in the parent becuase the inner
child needs to have been started, and the outer child is no longer able
to access the uid_map file, since it lost access to it when setting up
the mounts for the inner child.
So we need to communicate the uid shift back out, along with the PID of
the inner child process.
Failing to communicate this means that the invalid UID shift, which is
the value used to specify "this needs to be determined from the file
system" is left invalid, so setting up the user namespace's UID shift
fails.
|
|
1) never bother with setting the flag for loopback devices
2) if we fail to write the flag due to EROFS (which is likely to happen
in containers where /proc/sys is read-only) or any other error, check
if the flag already has the right value. If so, don't complain.
Closes #469
|
|
|
|
|
|
lldp: set correct state for processing
|
|
Ipv6 private extensions
|
|
|
|
Whoopsy, forgot to 'git add' this, sorry.
|
|
Just like we conditionalize loading kdbus.ko, we should conditionalize
mounting kdbusfs. Otherwise, we might run with kdbus if it is builtin,
even though the user didn't want this.
|
|
This patch add support for ipv6 privacy extensions.
The variable /proc/sys/net/ipv6/conf/<if>/use_tempaddr
can be changed via the boolean
IPv6PrivacyExtensions=[yes/no/prefer-temporary]
When true enables privacy extensions, but prefer public addresses over
temporary addresses.
prefer-temporary prefers temporary adresses over public addresses.
Defaults to false.
[Match]
Name=enp0s25
[Network]
IPv6PrivacyExtensions=prefer-temporary
|
|
sdboot was renamed to systemd-boot
Fixes: e7dd673d1e0a ("gummiboot/sd-boot/systemd-boot: rename galore")
Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
|
|
sd-bus: introduce new sd_bus_flush_close_unref() call
|
|
Avoid late bail-out based on a condition. This makes code hard to read.
Instead, reverse the forwarding-condition.
|
|
On dbus1, we receive systemd1.Agent signals via the private socket, hence
it's trusted. However, on kdbus we receive it on the system bus. We must
make sure it's sent by UID=0, otherwise unprivileged users can fake it.
Furthermore, never forward broadcasts we sent ourself. This might happen
on kdbus, as we forward the message on the same bus we received it on,
thus ending up in an endless loop.
|
|
Running `busctl monitor` currently buffers data for several seconds /
kilobytes before writing stdout. This is highly confusing if you dump in a
file, ^C busctl and then end up with a file with data of the last few
_seconds_ missing.
Fix this by explicitly flushing after each signal.
|
|
journal: in persistent mode create /var/log/journal, with all parents.
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
systemd/revert-429-nspawn-userns-uid-shift-autodetection-fix
Revert "nspawn: determine_uid_shift before forking"
|
|
systemd-journald races with systemd-tmpfiles-setup, and hence both are
started at about the same time. On a bare-bones system (e.g. with
empty /var, or even non-existent /var), systemd-tmpfiles will create
/var/log. But it can happen too late, that is systemd-journald already
attempted to mkdir /var/log/journal, ignoring the error. Thus failing
to create /var/log/journal. One option, without modifiying the
dependency graph is to create /var/log/journal directory with parents,
when persistent storage has been requested.
|
|
|
|
Error message for enumerating addresses was not 'addresses' but 'links'.
This patch fixes it.
|
|
richardmaw-codethink/machinectl-import-earlier-than-3-15
util: fall back in rename_noreplace when renameat2 isn't implemented
|
|
Qemu provides a separate pci-bridge exclusively for multi-seat setups.
The normal pci-pci bridge ("-device pci-bridge") has 1b36:0001. The new
pci-bridge-seat was specifically added to simplify guest-side
multiseat configuration. It is identical to the normal pci-pci bridge,
except that it has a different id (1b36:000a) so we can match it and
configure multiseating automatically.
Make sure we always treat this as separate seat if we detect this, just
like other "Pluggable" devices.
(David: write commit-message)
|
|
According to README we only need 3.7, and while it may also make sense
to bump that requirement when appropriate, it's trivial to fall back
when renameat2 is not available.
|
|
escape: fix exit code
|
|
When we get notifications from the kernel, we always turn them into
synthetic dbus1 messages. This means, we do *not* consume the kdbus
message, and as such have to free the offset.
Right now, the translation-helpers told the caller that they consumed the
message, which is wrong. Fix this by explicitly releasing all kernel
messages that are translated.
|
|
r == 0 indicates success, not failure
|
|
ldp_receive_frame after correct processing of the packet the state
should be LLDP_AGENT_RX_WAIT_FOR_FRAME not LLDP_AGENT_RX_UPDATE_INFO.
|
|
fix segfault when cancelling enslaving of links by netdevs
|
|
|
|
socket: Set SO_REUSEPORT before bind()
|
|
udev: destroy manager before cleaning environment
|
|
Due to our _cleanup_ usage for the udev manager, it will be destroyed
after the "exit:" label has finished. Therefore, it is the last
destruction done in main(). This has two side-effects:
- mac_selinux is destroyed before the udev manager is, possible causing
use-after-free if the manager-cleanup accesses selinux data
- log_close() is called *before* the manager is destroyed, possibly
re-opening the log if you use --debug (and thus not re-applying the
--debug option)
Avoid this by moving the manager-handling into a new function called
run(). This function will be left before we enter the "exit:" label in
main(), hence, the manager object will be destroyed early.
|
|
https://github.com/systemd/systemd/issues/462
|
|
Unlike dbus-daemon, the bus-proxy does not know the receiver of a
broadcast (as the kernel has exclusive access on the bus connections).
Hence, and "destination=" matches in dbus1 policies cannot be applied.
But kdbus does not place any restrictions on *SENDING* broadcasts, anyway.
The kernel never returns EPERM to KDBUS_CMD_SEND if KDBUS_MSG_SIGNAL is
set. Instead, receiver policies are checked. Hence, stop checking sender
policies for signals in bus-proxy and leave it up to the kernel.
This fixes some network-manager bus-proxy issues where NM uses weird
dst-based matches against interface-based matches. As we cannot perform
dst-based matches, our bus-proxy cannot properly implement this policy.
|
|
Right now, if you start a session via 'su' or 'sudo' from within a
session, we make sure to re-use the existing session instead of creating a
new one. We detect this by reading the session of the requesting PID.
However, with gnome-terminal running as a busname-unit, and as such
running outside the session of the user, this will no longer work.
Therefore, this patch makes sure to return the existing session of a VT if
you start a new one.
This has the side-effect, that you will re-use a session which your PID is
not part of. This works fine, but will break assumptions if the parent
session dies (and as such close your session even though you think you're
part of it). However, this should be perfectly fine. If you run multiple
logins on the same session, you should really know what you're doing. The
current way of silently accepting it but choosing the last registered
session is just weird.
|
