| Age | Commit message (Collapse) | Author |
|---|
|
Check for OOM conditions of asprintf() in bus_set_address_user().
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1150289
|
|
|
|
When a child event is disabled (in order to be freed) and there is no
SIGCHLD signal event, sd_event_source_set_enabled will disable SIGCHLD
even if there are other child events.
Also remove some unneeded signalfd updates.
https://bugs.freedesktop.org/show_bug.cgi?id=84659
Based-on-a-patch-by: Hristo Venev <mustrumr97@gmail.com>
|
|
We could end with a double close if we close the fd loop and flush_fd
fails. That would make us goto fail and there we close the fd once
again. This patch sets the fd to the return value for safe_close: -1
A fd with negative value will be ignored by the next call to
safe_close.
CID#996223
|
|
Also, let's try to make function names descriptive, instead of using
bools for flags.
|
|
Even though the 'emergency' and 'single' aliases come from sysvinit, the
lack of 'rescue' is still quite confusing (caught me by surprise for the
9th time yet) and inconsistent with `systemctl rescue` as well.
|
|
Sync kdbus.h once again. Two thing have changed:
a) KDBUS_CMD_EP_* was renamed to KDBUS_CMD_ENDPOINT_*
b) struct kdbus_cmd_hello and struct kdbus_cmd_make gained a
'features' bitfield (which is currently unused)
|
|
This enables tuntap support in the container (assumning the necessary capabilities are in place).
|
|
|
|
|
|
|
|
Just some cleanups around policy checks that came up during review.
The code is still not productive.
|
|
If we can't get the remote peer or security creds, bail out.
Spotted by coverity.
|
|
Check for OOM situations when vasprintf() returns < 0 in bus_error_setfv().
Spotted by coverity.
|
|
Fix a user of the KDBUS_CMD_FREE ioctl that was missed in the transition.
|
|
Walk the items first, then free the memory of the message.
Also, while at it, make coverity happy with an explicit (void) prefix.
We intentionally ignore the return value here.
|
|
It is no longer used after d663f1b1a92a778bcdc68f29b8c08cb49431b4f7
|
|
The KDBUS_CMD_FREE ioctl now uses a struct rather than a direct pointer
to the offset to free.
The KDBUS_CMD_MSG_CANCEL ioctl has also changes, but there's no user of
it yet in systemd.
|
|
linux/memfd.h was added linux 3.17, so it might not be widely
available for a while.
Also, check if memfd_create is defined, for the HAVE_LINUX_MEMFD_H
check to have a chance of succeeding.
Also, collapse all ifdefs for memfd-related stuff, because they
were all added together so there's no need to check separately.
|
|
|
|
Programs such as OpenVPN may use ask-password for not only retrieving
passwords, but also usernames. Masking usernames with * seems just silly.
v2 - Don't mess with termios flags, instead print the input
instead of an asterix. Resolves issues with backspace
and TAB input.
v3 - Renamed 'do_echo' variables and argument to 'echo'. Also
modified the ask_password_{tty,agent,auto} API instead of
additional wrapper functions.
[zj: undo changes to ask_password_auto, since no callers were using
the new argument.]
|
|
CID #996315.
|
|
XKB consumed mods include modifiers that *didn't* affect the translation,
but might affect it if used. This is very misleading, given that we are
usually not interested in that information. Therefore, keep them in real
mods to behave like X11 does. Maybe at some point, XKB introduces proper
shortcut matching...
Also make evcat display consumed modifiers so we can better debug those
situations.
|
|
Bold glyphs always use light colors. However, this color conversion is
limited to the foreground color, so skip it for backgrounds.
|
|
We rely on the parent terminal to do color conversion, so also leave
bold->light conversion to the parent. Otherwise, it will be performed
twice and we might apply it on the wrong color.
|
|
Hook up SM/RM 47/1047-1049 and enable alternate screen buffers for term
applications.
(David: rebased on top of -git, renamed helpers and added docs)
|
|
Terminal state can be saved/restored by applications. To simplify our
internal handling, put all affected state into a separate object.
Especially with alternate screen buffers, this will simplify our code
significantly.
|
|
We draw our own cursor in subterm now, so there's no reason to update the
cursor-position of the parent terminal on each frame. The parent's cursor
is hidden, anyway.
|
|
7BIT mode is enabled by default. Fix the comment to state this correctly.
|
|
|
|
The asserts used in the tests should never be allowed to be
optimized away
|
|
If we are bothering to check whether the kernel is not feeding us
bad data, we might as well do it properly.
CID #1237692.
|
|
|
|
m is always non-null at this point. This function is too long anyway.
|
|
dir cannot be NULL here, because it was allocated with alloca.
CID #1237768.
|
|
root cannot be NULL here, because it was allocated with alloca.
CID #1237769.
|
|
Appease coverity report #1237775.
Also rename ss to n, to make it visually different from ss.
|
|
This adds a first draft of systemd-consoled. This is still missing a lot
of features and does some rather primitive rendering. However, it shows
the direction this code is going and serves as basis for further testing.
The systemd-consoled binary should be run as `systemd --user' unit. It
automatically picks up any session marked as Desktop=SYSTEMD-CONSOLE.
Therefore, you can use any login-manager you want (ranging from /bin/login
to gdm) to create sessions for systemd-consoled. However, the sessions
managers must be prepared to set the Desktop= variable properly.
The user-session is called `systemd-console', only the daemon providing
the terminal environment is called `systemd-consoled' (mind the 'd').
So far, only a single terminal session is provided on each opened
user-session. However, we support multiple user-sessions (even across
multiple seats) just fine. In the future, the workspace logic will get
extended so you can have multiple terminal sessions in a single
user-session for easier access.
Note that this is still experimental! Instructions on how to run it will
follow shortly.
|
|
As it turns out, I can actually send data to the pty faster than the
terminal can read. Therefore, make sure we read as much data as possible
but bail out early enough to not cause starvation.
Kernel TTY buffers are 4k, so reduce the overall buffer size, but read
more than once if possible (up to 8 times sounds reasonable).
|
|
Instead of increasing the screen-age on redraw, we now increase it only on
real updates. This is effectively the same, but avoids increased age
counters on backbuffer rendering. Therefore, we can now check age counters
against fronbuffers safely, while rendering frames in background.
|
|
Terminals use pseudo color-codes mixed with 8bit and 24bit colors. Provide
a color-converter so external renderers only have to deal with ARGB32
colors.
This requires a color-palette as input as there's no fixed mapping. We
provide a default, but maybe we wanna support external palettes in the
future.
|
|
This is the most simple way to render cursors: flip attr->inverse of the
cursor cell. This causes the background and foreground colors of the
cursor-cell to be inversed.
Now that we render cursors ourselves, make subterm not call into the
parent terminal to render cursors.
|
|
If we hide or show the cursor, we change visual attributes and have to
mark the underlying cell as dirty. Otherwise, the terminal will not be
redrawn.
|
|
Matching keyboard shortcuts on internationalized keyboards is actually
non-trivial. Matching the actual key is easy, but the modifiers can be
used by both, the matching and the translation step. Therefore, XKB
exports "consumed-modifiers" that we use to figure out whether a modifier
was already used by the translation step.
The new IDEV_KBDMATCH() helper can be used to match on any keyboard
shortcut and it will do the right thing.
|
|
Implement the feed_keyboard() handling by mapping XKB keys according to
DEC-VT behavior.
Public information on terminal key-mappings is pretty scarce. We only
implement the most basic mapping for now. Further improvements welcome!
|
|
XKB_KEY_NoSymbol is defined as 0 but does not correspond to a VT key with
ASCII value 0. No such key exists, so don't try to find such a key.
|
|
In case we cannot render a glyph, we want a fallback we can display
instead. If we rely on the font itself to provide the fallback character,
we have nothing to display if that character is not available. Therefore,
add a static fallback that we can use at any time.
|
|
Don't hard-code the screen renderer but use the newly introduced
term_screen_draw() helper.
|
|
We don't want to expose the term_screen internals for rendering.
Therefore, provide an iterator that allows external renderers to draw
terminals.
|
