summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-05-18util: split all hostname related calls into hostname-util.cLennart Poettering
2015-05-18fstab-generator: add x-systemd.requires and x-systemd.requires-mounts-forKarel Zak
Currently we have no way how to specify dependencies between fstab entries (or another units) in the /etc/fstab. It means that users are forced to bypass fstab and write .mount units manually. The patch introduces new systemd fstab options: x-systemd.requires=<PATH> - to specify dependence an another mount (PATH is translated to unit name) x-systemd.requires=<UNIT> - to specify dependence on arbitrary UNIT x-systemd.requires-mounts-for=<PATH ...> - to specify dependence on another paths, implemented by RequiresMountsFor=. The option may be specified more than once. For example two bind mounts where B depends on A: /mnt/test/A /mnt/test/A none bind,defaults /mnt/test/A /mnt/test/B none bind,x-systemd.requires=/mnt/test/A More complex example with overlay FS where one mount point depends on "low" and "upper" directories: /dev/sdc1 /mnt/low ext4 defaults /dev/sdc2 /mnt/high ext4 defaults overlay /mnt/merged overlay lowerdir=/mnt/low,upperdir=/mnt/high/data,workdir=/mnt/high/work,x-systemd.requires-mounts-for=/mnt/low,x-systemd.requires-mounts-for=mnt/high https://bugzilla.redhat.com/show_bug.cgi?id=812826 https://bugzilla.redhat.com/show_bug.cgi?id=1164334
2015-05-16load-fragment: put quotes around iffy rvalueZbigniew Jędrzejewski-Szmek
2015-05-16Use fflush_and_check() in more placesZbigniew Jędrzejewski-Szmek
2015-05-16udevd: queue - update queue state when events are queued/freedTom Gundersen
This way it is more obvious that the queue flag file is always up-to-date. Moreover, we only have to touch/unlink it when the first/last event is allocated/freed.
2015-05-16udevd: on_worker - distinguish between EINTR and EAGAINTom Gundersen
EAGAIN means there are no more messages to read, so give up. EINTR means we got interrupted reading a message, so try again.
2015-05-16udevd: worker - use loop_write() rather than send()Tom Gundersen
When notifying the main daemon about event completion, make sure the message is sent successfully, and not interrupted.
2015-05-16util: loop_write - accept 0-length messageTom Gundersen
write() can send empty messages, so make sure loop_write() can do the same.
2015-05-16udevd: net - fix leak in .link configTom Gundersen
Path, Driver and Type are now strv rather than strings, so free them properly.
2015-05-15udev-ctrl: make _unref() always return NULLTom Gundersen
Bring this in line with the rest of the codebase.
2015-05-15tmpfiles: use lstat() instead of stat() when checking whether a file system ↵Lennart Poettering
object already exists
2015-05-15tmpfiles: don't fail if we cannot create a subvolume because a file system ↵Lennart Poettering
is read-only but a dir already exists anyway https://bugs.freedesktop.org/show_bug.cgi?id=90281
2015-05-15coredump: make sure we vacuum by defaultLennart Poettering
Only if both keep_free and max_use are actually 0 we can shortcut things and avoid vacuuming. If either are positive or -1 we need to execute the vacuuming. http://lists.freedesktop.org/archives/systemd-devel/2015-April/031382.html
2015-05-15socket-util: socket_address_parse() should not log errors on its ownLennart Poettering
Given that socket_address_parse() is mostly a "library" call it shouldn't log on its own, but leave that to its caller. This patch removes logging from the call in case IPv6 is not available but and IPv6 address shall be parsed. Instead a new call socket_address_parse_and_warn() is introduced which first invokes socket_address_parse() and then logs if necessary. This should fix "make check" on ipv6-less kernels: http://lists.freedesktop.org/archives/systemd-devel/2015-April/031385.html
2015-05-15core: Fix assertion with empty Exec*= pathsMartin Pitt
An Exec*= line with whitespace after modifiers, like ExecStart=- /bin/true is considered to have an empty command path. This is as specified, but causes systemd to crash with Assertion 'skip < l' failed at ../src/core/load-fragment.c:607, function config_parse_exec(). Aborting. Aborted (core dumped) Fix this by logging an error instead and ignoring the invalid line. Add corresponding test cases. Also add a test case for a completely empty value which resets the command list. https://launchpad.net/bugs/1454173
2015-05-15timedate: fix memory leak in timedatedCristian Rodríguez
$ /usr/lib/systemd/systemd-timedated (wait until auto-exit) ================================================================= ==396==ERROR: LeakSanitizer: detected memory leaks Direct leak of 928 byte(s) in 1 object(s) allocated from: #0 0x7f782f788db1 in __interceptor_calloc (/usr/lib64/libasan.so.2+0x96db1) #1 0x562a83ae60cf in bus_message_from_header src/libsystemd/sd-bus/bus-message.c:480 #2 0x562a83ae6f5a in bus_message_from_malloc src/libsystemd/sd-bus/bus-message.c:576 #3 0x562a83ad3cad in bus_socket_make_message src/libsystemd/sd-bus/bus-socket.c:915 #4 0x562a83ad4cfc in bus_socket_read_message src/libsystemd/sd-bus/bus-socket.c:1051 #5 0x562a83ab733f in bus_read_message src/libsystemd/sd-bus/sd-bus.c:1647 #6 0x562a83ab98ea in sd_bus_call src/libsystemd/sd-bus/sd-bus.c:2038 #7 0x562a83b1f46d in sd_bus_call_method src/libsystemd/sd-bus/bus-convenience.c:94 #8 0x562a83aab3e1 in context_read_ntp src/timedate/timedated.c:192 #9 0x562a83aae1af in main src/timedate/timedated.c:730 #10 0x7f782eb238c4 in __libc_start_main (/lib64/libc.so.6+0x208c4) Indirect leak of 77 byte(s) in 1 object(s) allocated from: #0 0x7f782f788f6a in realloc (/usr/lib64/libasan.so.2+0x96f6a) #1 0x562a83ad418a in bus_socket_read_message src/libsystemd/sd-bus/bus-socket.c:963 #2 0x562a83ab733f in bus_read_message src/libsystemd/sd-bus/sd-bus.c:1647 #3 0x562a83ab98ea in sd_bus_call src/libsystemd/sd-bus/sd-bus.c:2038 #4 0x562a83b1f46d in sd_bus_call_method src/libsystemd/sd-bus/bus-convenience.c:94 #5 0x562a83aab3e1 in context_read_ntp src/timedate/timedated.c:192 #6 0x562a83aae1af in main src/timedate/timedated.c:730 #7 0x7f782eb238c4 in __libc_start_main (/lib64/libc.so.6+0x208c4) Indirect leak of 2 byte(s) in 1 object(s) allocated from: #0 0x7f782f75493f in strdup (/usr/lib64/libasan.so.2+0x6293f) #1 0x562a83b0229b in bus_message_parse_fields src/libsystemd/sd-bus/bus-message.c:5382 #2 0x562a83ae7290 in bus_message_from_malloc src/libsystemd/sd-bus/bus-message.c:601 #3 0x562a83ad3cad in bus_socket_make_message src/libsystemd/sd-bus/bus-socket.c:915 #4 0x562a83ad4cfc in bus_socket_read_message src/libsystemd/sd-bus/bus-socket.c:1051 #5 0x562a83ab733f in bus_read_message src/libsystemd/sd-bus/sd-bus.c:1647 #6 0x562a83ab98ea in sd_bus_call src/libsystemd/sd-bus/sd-bus.c:2038 #7 0x562a83b1f46d in sd_bus_call_method src/libsystemd/sd-bus/bus-convenience.c:94 #8 0x562a83aab3e1 in context_read_ntp src/timedate/timedated.c:192 #9 0x562a83aae1af in main src/timedate/timedated.c:730 #10 0x7f782eb238c4 in __libc_start_main (/lib64/libc.so.6+0x208c4) SUMMARY: AddressSanitizer: 1007 byte(s) leaked in 3 allocation(s). This is due to missing _cleanup_bus_message_unref_ in context_read_ntp()
2015-05-15generator: use fflush_and_check() where appropriateLennart Poettering
2015-05-15core: don't consider umask for SocketMode=Davide Bettio
https://bugs.freedesktop.org/show_bug.cgi?id=89248
2015-05-15core: Execute first boot presets in an enable-only preset-mode.Dimitri John Ledkov
This means any existing enabled units well be preserved and no pre-created symlinks will be removed. This is done on first boot, when the assumption is that /etc is not populated at all (no machine-id setup). For minimal containers that gives a significant first boot speed up, approximately ~20ms / ~16% in my trials.
2015-05-15networkd: don't try to turn on ipv6 forwarding if kernel lacks IPv6 supportLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2015-May/031598.html
2015-05-15networkd: don't touch global forwarding settingBenedikt Morbach
This reverts commit 43c6d5abacaebf813845934ec8d5e5ee3c431854 (and a small part of 4046d8361c55c80ab8577aea52523b9e6eab0d0c) It turns out we don't actually need to set the global ip_forward setting. The only relevant setting is the one on each interface. What the global toggle actually does is switch forwarding on/off for all currently present interfaces and change the default for new ones. That means that by setting the global ip_forward we - Introduce a race condition, because if the interface with IPForward=yes is brought up after one with IPForward=no, both will have forwarding enabled, because the global switch turns it on for all interfaces. If the other interface comes up first networkd correctly sets forward=0 and it doesn't get overridden. - Change the forwarding setting for interfaces that networkd is not configured to touch, even if the user disabled forwarding via sysctl, either globally or per-interface As forwarding works fine without this, as long as all relevant interfacest individually set IPForward=yes: just drop it This means that non-networkd interfaces use the global default while networkd interfaces default to off if IPForward isn't given.
2015-05-15systemctl: introduce --now for enable, disable and maskJan Synacek
https://bugs.freedesktop.org/show_bug.cgi?id=42940
2015-05-14nspawn: allow access to device nodes listed in --bind= and --bind-ro= switchesStefan Junker
https://bugs.freedesktop.org/show_bug.cgi?id=90385
2015-05-14test-bus-chat: various modernizationsLennart Poettering
2015-05-14sd-bus: fix memory leak in test-bus-chatCristian Rodríguez
Building with address sanitizer enabled on GCC 5.1.x a memory leak is reported because we never close the bus, fix it by using cleanup variable attribute.
2015-05-14util: introduce memmem_safe() and make use of itLennart Poettering
GNU memmem() requires a nonnull first parameter. Let's introduce memmem_safe() that removes this restriction for zero-length parameters, and make use of it where appropriate. http://lists.freedesktop.org/archives/systemd-devel/2015-May/031705.html
2015-05-14util: use GNU comparison function prototype for qsort_safe()Lennart Poettering
2015-05-13networkd: remove dead initializationThomas Hindoe Paaboel Andersen
2015-05-13core: only set event source name when we create an event sourceLennart Poettering
2015-05-13journal: fix size commentPeter Lemenkov
Looks like sizeof(struct Header) is 240 not 224
2015-05-13util: add generic calls for prefixing a root directory to a pathLennart Poettering
So far a number of utilities implemented their own calls for this, unify them in prefix_root() and prefix_roota(). The former uses heap memory, the latter allocates from the stack via alloca(). Port over most users of a --root= logic.
2015-05-13core: make exec code a bit more readableLennart Poettering
Let's add a function that checks whether we need fs namespacing, to make things easier to read, instead of using a humungous if expression...
2015-05-13core: fix memory leak in manager_run_generators()Cristian Rodríguez
If systemd is built with GCC address sanitizer or leak sanitizer the following memory leak ocurs: May 12 02:02:46 linux.site systemd[326]: ================================================================= May 12 02:02:46 linux.site systemd[326]: ==326==ERROR: LeakSanitizer: detected memory leaks May 12 02:02:46 linux.site systemd[326]: Direct leak of 101 byte(s) in 3 object(s) allocated from: May 12 02:02:46 linux.site systemd[326]: #0 0x7fd1f504993f in strdup (/usr/lib64/libasan.so.2+0x6293f) May 12 02:02:46 linux.site systemd[326]: #1 0x55d6ffac5336 in strv_new_ap src/shared/strv.c:163 May 12 02:02:46 linux.site systemd[326]: #2 0x55d6ffac56a9 in strv_new src/shared/strv.c:185 May 12 02:02:46 linux.site systemd[326]: #3 0x55d6ffa80272 in generator_paths src/shared/path-lookup.c:223 May 12 02:02:46 linux.site systemd[326]: #4 0x55d6ff9bdb0f in manager_run_generators src/core/manager.c:2828 May 12 02:02:46 linux.site systemd[326]: #5 0x55d6ff9b1a10 in manager_startup src/core/manager.c:1121 May 12 02:02:46 linux.site systemd[326]: #6 0x55d6ff9a78e3 in main src/core/main.c:1667 May 12 02:02:46 linux.site systemd[326]: #7 0x7fd1f394e8c4 in __libc_start_main (/lib64/libc.so.6+0x208c4) May 12 02:02:46 linux.site systemd[326]: Direct leak of 29 byte(s) in 1 object(s) allocated from: May 12 02:02:46 linux.site systemd[326]: #0 0x7fd1f504993f in strdup (/usr/lib64/libasan.so.2+0x6293f) May 12 02:02:46 linux.site systemd[326]: #1 0x55d6ffac5288 in strv_new_ap src/shared/strv.c:152 May 12 02:02:46 linux.site systemd[326]: #2 0x55d6ffac56a9 in strv_new src/shared/strv.c:185 May 12 02:02:46 linux.site systemd[326]: #3 0x55d6ffa80272 in generator_paths src/shared/path-lookup.c:223 May 12 02:02:46 linux.site systemd[326]: #4 0x55d6ff9bdb0f in manager_run_generators src/core/manager.c:2828 May 12 02:02:46 linux.site systemd[326]: #5 0x55d6ff9b1a10 in manager_startup src/core/manager.c:1121 May 12 02:02:46 linux.site systemd[326]: #6 0x55d6ff9a78e3 in main src/core/main.c:1667 May 12 02:02:46 linux.site systemd[326]: #7 0x7fd1f394e8c4 in __libc_start_main (/lib64/libc.so.6+0x208c4) May 12 02:02:46 linux.site systemd[326]: SUMMARY: AddressSanitizer: 130 byte(s) leaked in 4 allocation(s). There is a leak due to the the use of cleanup_free instead _cleanup_strv_free_
2015-05-13nspawn: skip symlink to a combined cgroup hierarchy if it already existsIago López Galeiras
If a symlink to a combined cgroup hierarchy already exists and points to the right path, skip it. This avoids an error when the cgroups are set manually before calling nspawn.
2015-05-13nspawn: only mount the cgroup root if it's not already mountedIago López Galeiras
This allows the user to set the cgroups manually before calling nspawn.
2015-05-13Default to /usr/bin/u?mount, configurable, rather than hard-coded /bin/u?mount.Dimitri John Ledkov
2015-05-13core: never create device depencies for /dev/root mountsLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2015-May/031658.html
2015-05-13nspawn: rework custom mount point order, and add support for overlayfsLennart Poettering
Previously all bind mount mounts were applied in the order specified, followed by all tmpfs mounts in the order specified. This is problematic, if bind mounts shall be placed within tmpfs mounts. This patch hence reworks the custom mount point logic, and alwas applies them in strict prefix-first order. This means the order of mounts specified on the command line becomes irrelevant, the right operation will always be executed. While we are at it this commit also adds native support for overlayfs mounts, as supported by recent kernels.
2015-05-13modules-load: fix memory leakCristian Rodríguez
================================================================= ==64281==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7f623c961c4a in malloc (/usr/lib64/libasan.so.2+0x96c4a) #1 0x5651f79ad34e in malloc_multiply (/home/crrodriguez/scm/systemd/systemd-modules-load+0x2134e) #2 0x5651f79b02d6 in strjoin (/home/crrodriguez/scm/systemd/systemd-modules-load+0x242d6) #3 0x5651f79be1f5 in files_add (/home/crrodriguez/scm/systemd/systemd-modules-load+0x321f5) #4 0x5651f79be6a3 in conf_files_list_strv_internal (/home/crrodriguez/scm/systemd/systemd-modules-load+0x326a3) #5 0x5651f79bea24 in conf_files_list_nulstr (/home/crrodriguez/scm/systemd/systemd-modules-load+0x32a24) #6 0x5651f79ad01a in main (/home/crrodriguez/scm/systemd/systemd-modules-load+0x2101a) #7 0x7f623c11586f in __libc_start_main (/lib64/libc.so.6+0x2086f) SUMMARY: AddressSanitizer: 32 byte(s) leaked in 1 allocation(s). This happens due to the wrong cleanup attribute is used (free vs strv_free)
2015-05-13shared: Use O_EXCL with O_TMPFILE in open_tmpfileCristian Rodríguez
In this usecase, the file will never be materialized with linkat().
2015-05-12fsck: add enum with fsck exit codesThomas Hindoe Paaboel Andersen
2015-05-12udevd: manager - move a few global variables into the Manager objectTom Gundersen
2015-05-12udevd: pass a Manager objcet to event handlersTom Gundersen
Stop relying on global variables in event handlers, and move them all to a Manager object instead.
2015-05-12boot: function parameters are separated by commaKay Sievers
2015-05-12core: drop redundant logging about notification messagesTom Gundersen
Before: May 12 17:11:22 tomegun-x2402 systemd[1]: systemd-udevd.service: Got notification message for unit. May 12 17:11:22 tomegun-x2402 systemd[1]: systemd-udevd.service: Got notification message from PID 195 (READY=1) May 12 17:11:22 tomegun-x2402 systemd[1]: systemd-udevd.service: Ggot READY=1 After: May 12 17:11:22 tomegun-x2402 systemd[1]: systemd-udevd.service: Got notification message from PID 195 (READY=1)
2015-05-12udevd: remove stale commentTom Gundersen
2015-05-12udevd: explicitly update queue file before answering to pingTom Gundersen
This avoids updating the flag files twice for every loop, and also removes another dependency in the main-loop, so we are freer to reshufle it as we want.
2015-05-12udevd: explicitly read out uevents we create ourselvesTom Gundersen
Rather than skippling ctrl handling whenever we have handlede inotify events (and hence may have synthesized a 'change' event), just call the uevent handling explicitly from on_inotify() so that the event queue is up-to-date.
2015-05-12udevd: move to sd-event-style event handlersTom Gundersen
2015-05-12networkd: network_get - allow udev_device to be NULLTom Gundersen
In containers we never have udev devices, so drop the assert. This fixes an assertion introduced in af3aa302741b6edb0729925febb5f8bc26721fe3.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-12 18:33:07 +0000