summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-02-10Merge pull request #2495 from heftig/masterLennart Poettering
tty-ask-password: Split out password sending
2016-02-10core: treat JobTimeout=0 as equivalent to JobTimeout=infinityLennart Poettering
Corrects an incompatibility introduced with 36c16a7cdd6c33d7980efc2cd6a2211941f302b4. Fixes: #2537
2016-02-10core: simplify how we parse TimeoutSec=, TimeoutStartSec= and TimeoutStopSec=Lennart Poettering
Let's make things more obvious by placing the parse_usec() invocation directly in config_parse_service_timeout().
2016-02-10coredump: dump priviliges when processing system coredumpsLennart Poettering
Let's add an extra-safety net and change UID/GID to the "systemd-coredump" user when processing coredumps from system user. For coredumps of normal users we keep the current logic of processing the coredumps from the user id the coredump was created under. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=87354
2016-02-10core: set RLIMIT_CORE to unlimited by defaultLennart Poettering
The kernel sets RLIMIT_CORE to 0 by default. Let's bump this to unlimited by default (for systemd itself and all processes we fork off), so that the coredump hooks have an effect if they honour it. Bumping RLIMIT_CORE of course would have the effect that "core" files will end up on the system at various places, if no coredump hook is used. To avoid this, make sure PID1 sets the core pattern to the empty string by default, so that this logic is disabled. This change in defaults should be useful for all systems where coredump hooks are used, as it allows useful usage of RLIMIT_CORE from these hooks again. OTOH systems that expect that coredumps are placed under the name "core" in the current directory will break with this change. Given how questionnable this behaviour is, and given that no common distro makes use of this by default it shouldn't be too much of a loss. Also, the old behaviour may be restored by explicitly configuring a "core_pattern" of "core", and setting the default system RLIMIT_CORE to 0 again via system.conf.
2016-02-10coredump: honour RLIMIT_CORE when saving/processing coredumpsLennart Poettering
With this change processing/saving of coredumps takes the RLIMIT_CORE resource limit of the crashing process into account, given the user control whether specific processes shall core dump or not, and how large to make the core dump. Note that this effectively disables core-dumping for now, as RLIMIT_CORE defaults to 0 (i.e. is disabled) for all system processes.
2016-02-10coredump: rework coredumping logicLennart Poettering
This reworks the coredumping logic so that the coredump handler invoked from the kernel only collects runtime data about the crashed process, and then submits it for processing to a socket-activate coredump service, which extracts a stacktrace and writes the coredump to disk. This has a number of benefits: the disk IO and stack trace generation may take a substantial amount of resources, and hence should better be managed by PID 1, so that resource management applies. This patch uses RuntimeMaxSec=, Nice=, OOMScoreAdjust= and various sandboxing settings to ensure that the coredump handler doesn't take away unbounded resources from normally priorized processes. This logic is also nice since this makes sure the coredump processing and storage is delayed correctly until /var/systemd/coredump is mounted and writable. Fixes: #2286
2016-02-10activate: add a new switch --inetd to enable inetd-style socket activationLennart Poettering
Previously, using --accept would enable inetd-style socket activation in addition to per-connection operation. This is now split into two switches: --accept only switches between per-connection or single-instance operation. --inetd switches between inetd-style or new-style fd passing. This breaks the interface of the tool, but given that it is a debugging tool shipped in /usr/lib/systemd/ it's not really a public interface. This change allows testing new-style per-connection daemons.
2016-02-10activate: minor fixesLennart Poettering
2016-02-10activate: add new --seqpacket switch for testing SOCK_SEQPACKET socketsLennart Poettering
2016-02-10resolved: include inttypes.h in resolved-def.h given that we use UINT64_CLennart Poettering
2016-02-10build-sys: move coredump logic into subdir of its ownLennart Poettering
2016-02-10Merge pull request #2569 from zonque/removalsMartin Pitt
Remove some old cruft
2016-02-10tree-wide: remove Emacs lines from all filesDaniel Mack
This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.
2016-02-10Merge pull request #2564 from poettering/fix-2467Daniel Mack
Fix for #2467
2016-02-10util-lib: make sure usec_sub() doesn't degrade USEC_INFINITYLennart Poettering
As suggested in: https://github.com/systemd/systemd/pull/2542#issuecomment-181877820
2016-02-10core: make the StartLimitXYZ= settings generic and apply to any kind of ↵Lennart Poettering
unit, not just services This moves the StartLimitBurst=, StartLimitInterval=, StartLimitAction=, RebootArgument= from the [Service] section into the [Unit] section of unit files, and thus support it in all unit types, not just in services. This way we can enforce the start limit much earlier, in particular before testing the unit conditions, so that repeated start-up failure due to failed conditions is also considered for the start limit logic. For compatibility the four options may also be configured in the [Service] section still, but we only document them in their new section [Unit]. This also renamed the socket unit failure code "service-failed-permanent" into "service-start-limit-hit" to express more clearly what it is about, after all it's only triggered through the start limit being hit. Finally, the code in busname_trigger_notify() and socket_trigger_notify() is altered to become more alike. Fixes: #2467
2016-02-10Merge pull request #2563 from 0xAX/timespec_load_nsec-staticLennart Poettering
time-util: make timespec_load_nsec() static
2016-02-10time-util: make timespec_load_nsec() staticAlexander Kuleshov
The timespec_load_nsec() function has no callers outside of the time-util.c, so we can make it static.
2016-02-09Merge pull request #2565 from poettering/fix-2315Zbigniew Jędrzejewski-Szmek
2016-02-09core: clarify which unit file is masked in error messageLennart Poettering
After all, the masked unit file error might be returned when enqueuing a unit that is not masked but requires a masked unit. In this case it should really be clear which unit is meant here.
2016-02-09core: change internal error code for masked units from EBADR to ESHUTDOWNLennart Poettering
This commit changes the mapping of the BUS_ERROR_UNIT_MASKED error to ESHUTDOWN. This error is used whenever the transaction engine is asked to operate on a masked unit. ESHUTDOWN is what is used for the similar case when the unit file enable/disable logic hits a masked unit file, hence is a natural candidate to be used here too. Background: before this patch both "job type not applicable" and "unit masked" where mapped to EBADR, which transaction_add_job_and_dependencies() then checked for. It actually wanted to check exclusively for the former error condition, not the latter but due to the same mapping this failed to work. This patch semi-undoes an accidental change made in caffa4ef700fdd0eadd6c0b2ef9925611672a1bc, however restores the error number to ESHUTDOWN instead of the original ENOSYS (for the reasons indicated above). To make this easier to grok for the future, I added comments to explaining which error conditions are checked for. Fixes: #2315
2016-02-09Merge pull request #2561 from msekletar/virtio-blk-by-pathLennart Poettering
path_id: reintroduce by-path links for virtio block devices
2016-02-09path_id: reintroduce by-path links for virtio block devicesMichal Sekletar
Enumeration of virtio buses is global and hence non-deterministic. However, we are guaranteed there is never going to be more than one virtio bus per parent PCI device. While populating ID_PATH we simply skip virtio part of the syspath and we extend the path using the sysname of the parent PCI device. With this patch udev creates following by-path links for virtio-blk device /dev/vda which contains two partitions. ls -l /dev/disk/by-path/ total 0 lrwxrwxrwx 1 root root 9 Feb 9 10:47 virtio-pci-0000:00:05.0 -> ../../vda lrwxrwxrwx 1 root root 10 Feb 9 10:47 virtio-pci-0000:00:05.0-part1 -> ../../vda1 lrwxrwxrwx 1 root root 10 Feb 9 10:47 virtio-pci-0000:00:05.0-part2 -> ../../vda2 See: http://lists.linuxfoundation.org/pipermail/virtualization/2015-August/030328.html Fixes #2501
2016-02-09journal: Drop monotonicity check when appending to journal fileKlearchos Chaloulos
Remove the check that triggers rotation of the journal file when the arriving log entry had a monotonic timestamp smaller that the previous log entry. This check causes unnecessary rotations when journal-remote was receiving from multiple senders, therefore monotonicity can not be guaranteed. Also, it does not offer any useful functionality for systemd-journald.
2016-02-09Merge pull request #2542 from 0xAX/get_ts_deltaLennart Poettering
time-util: cleanups
2016-02-08Merge pull request #2547 from 0xAX/generalize-format-timestamp-internalLennart Poettering
time-util: merge format_timestamp_internal() and format_timestamp_int…
2016-02-09time-util: introduce usec_sub()Alexander Kuleshov
The dual_timestamp_from_realtime(), dual_timestamp_from_monotonic() and dual_timestamp_from_boottime_or_monotonic() shares the same code for comparison given ts with delta. Let's move it to the separate inline function to prevent code duplication.
2016-02-09time-util: merge format_timestamp_internal() and format_timestamp_internal_us()Alexander Kuleshov
The time_util.c provides format_timestamp_internal() and format_timestamp_internal_us() functions for a timestamp formating. Both functions are very similar and differ only in formats handling. We can add additional boolean parameter to the format_timestamp_internal() function which will represent is a format for us timestamp or not. This allows us to get rid of format_timestamp_internal_us() that is prevent code duplication. We can remove format_timestamp_internal_us() safely, because it is static and has no users outside of the time_util.c. New fourth parameter will be passed inside of the format_timestamp(), format_timestamp_us() and etc, functions, but the public API is not changed.
2016-02-08Merge pull request #2533 from keszybz/read-only-seedLennart Poettering
random-seed: provide nicer error message when unable to open file
2016-02-07Merge pull request #2546 from torstehu/fix-typo3Zbigniew Jędrzejewski-Szmek
treewide: fix typos and spacing
2016-02-07Merge pull request #2536 from vcaputo/journal-misc-cleanupsZbigniew Jędrzejewski-Szmek
journal: miscellaneous cleanups
2016-02-07treewide: fix typos and spacingTorstein Husebø
2016-02-06random-seed: provide nicer error message when unable to open fileZbigniew Jędrzejewski-Szmek
If /var is read-only, and the seed file does not exist, we would print a misleading error message for ENOENT. Print both messages instead, to make it easy to diagonose. Also, treat the cases of missing seed file the same as empty seed file and exit successfully. Initialize the return code properly. Fixes https://github.com/systemd/systemd/issues/2530, https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813599.
2016-02-06Merge pull request #2525 from chaloulo/journal-remote-microhttp-max-memory-usageLennart Poettering
journal-remote: decrease microhttpd memory limit
2016-02-06Merge pull request #2540 from 0xAX/use-dual-timestamp-get-in-timeutilLennart Poettering
time-util: use dual_timestamp_get()
2016-02-06time-util: use dual_timestamp_get()Alexander Kuleshov
The time-util.c provides dual_timestamp_get() function for getting realtime and monotonic timestamps. Let's use it instead of direct realtime/monotonic calculation.
2016-02-06journal: add missing space to switch statementVito Caputo
2016-02-06Merge pull request #2138 from stefwalter/journal-combineLennart Poettering
Combine journal catalog entries with the same id
2016-02-05journal: remove template from open_journal argsVito Caputo
None of the callers take advantage of this parameter, it's always NULL, this is just a private helper function to simplify the call sites so drop the template parameter altogether. If a caller emerges later who needs it, it can be restored.
2016-02-05journal: Add test for merging journal entriesStef Walter
2016-02-05journal: Refactor test-catalog importing testsStef Walter
One function per test. Remove shared state between tests.
2016-02-05journal: Combine journal catalog entries with the same idStef Walter
Instead of discarding duplicate catalog entries, we now combine them. This allows software or admins to add or override catalog headers, or add additional text to the catalog message.
2016-02-05journal: move mmap() ENOMEM loop to functionVito Caputo
Introduces mmap_try_harder()
2016-02-05journal: add asserts on f->(data|field)_hash_tableVito Caputo
Functions dereferencing these members should assert their non-NULL state.
2016-02-05journal: add asserts for f->headerVito Caputo
Just some additional asserts in functions dereferencing f->header.
2016-02-05journal: move window initialization to window_addVito Caputo
2016-02-04journal-remote: decrease microhttpd memory limitKlearchos Chaloulos
Set the MHD_OPTION_CONNECTION_MEMORY_LIMIT to 128KB. The precious value was DATA_SIZE_MAX, which was defined as 1024*1024*768. This caused journal-remote to allocate 756MB for each journal-upload connection, thus exhausting the available memory.
2016-02-04resolved: correctly store interface index of RRs in cacheLennart Poettering
Fixes: #2361
2016-02-04resolved: properly turn off DNSSEC for LLMNR/mDNS scopesLennart Poettering