| Age | Commit message (Collapse) | Author |
|---|
|
These system calls clearly fall in the @ipc category, hence should be listed
there, simply to avoid confusion and surprise by the user.
|
|
The system call is already part in @default hence implicitly allowed anyway.
Also, if it is actually blocked then systemd couldn't execute the service in
question anymore, since the application of seccomp is immediately followed by
it.
|
|
Timing and sleep are so basic operations, it makes very little sense to ever
block them, hence don't.
|
|
Switch drivers uses phys_port_name attribute to pass front panel port
name to user. Use it to generate netdev names.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
|
|
We would close all the stored fds in service_release_resources(), which of
course broke the whole concept of storing fds over service restart.
Fixes #4408.
|
|
"Secondary arch" table for mips is entirely speculative…
|
|
Lustre is also a remote file system that wants the network to be up before it is mounted.
|
|
I'm seeing strange decompression errors with lz4, which
might be content-dependent. Extend test-compression to allow
testing specific content.
(Edit: PEBKAC: lzcat and lz4cat are not the same beast.
Nevertheless, the test might still be useful in the future.)
|
|
This introduces a new option, `tcrypt-veracrypt`, that sets the
corresponding VeraCrypt flag in the flags passed to cryptsetup.
|
|
A pendant for #4481.
|
|
Should help with debugging #4408.
|
|
If it was a duplicate, log nothing.
|
|
seccomp: also block shmat(..., SHM_EXEC) for MemoryDenyWriteExecute
|
|
Document NoNewPrivileges default value
|
|
|
|
Suggested by @keszybz in #4488.
|
|
core: improve mount namespace and working directory setup
|
|
detect-virt: add --private-users switch to check if a userns is active; add Condition=private-users
|
|
|
|
This makes applying groups after applying the working directory, this
may allow some flexibility but at same it is not a big deal since we
don't execute or do anything between applying working directory and
droping groups.
|
|
Improve apply_working_directory() and lets get the current working directory
inside of it.
|
|
|
|
|
|
We updated 'fn' but checked 'v' instead.
From 698c5a17
Spotted with PVS
|
|
Fix some formatting details in the merge.
|
|
Rewrite the function to be slightly simpler. In particular, if a specific
match is found (like ConditionVirtualization=yes), simply return an answer
immediately, instead of relying that "yes" will not be matched by any of
the virtualization names below.
No functional change.
|
|
|
|
This can be useful to silence warnings about units which fail in userns
container.
|
|
Various things don't work when we're running in a user namespace, but it's
pretty hard to reliably detect if that is true.
A function is added which looks at /proc/self/uid_map and returns false
if the default "0 0 UINT32_MAX" is found, and true if it finds anything else.
This misses the case where an 1:1 mapping with the full range was used, but
I don't know how to distinguish this case.
'systemd-detect-virt --private-users' is very similar to
'systemd-detect-virt --chroot', but we check for a user namespace instead.
|
|
Invalid IP addresses would be passed through as-is:
$ networkctl status wlp3s0:
● 2: wlp3s0
Link File: /usr/lib/systemd/network/99-default.link
Network File: /etc/systemd/network/wlp3s0.network
Type: wlan
State: routable (configured)
Path: pci-0000:03:00.0
Driver: iwlwifi
Vendor: Intel Corporation
Model: Centrino Advanced-N 6205 [Taylor Peak] (Centrino Advanced-N 6205 AGN)
HW Address: XXXXXXXXXX (Intel Corporate)
Address: 192.168.2.103
XXXXXXXXXXX
Gateway: 192.168.2.1 (Arcadyan Technology Corporation)
DNS: 127.0.0.5553
Instead verify that DNS= has a valid list of addresses when parsing configuration.
Fixes #4462.
|
|
shmat(..., SHM_EXEC) can be used to create writable and executable
memory, so let's block it when MemoryDenyWriteExecute is set.
|
|
Check if values filled up by KD_FONT_OP_GET ioctl make sense -
dummy driver for example doesn't implement required functionality
at all.
|
|
two minor systemctl memleak fixes
|
|
In case of running test-execute on systems with systemd < v232, several
tests like privatedevices or protectkernelmodules fail because
/run/systemd/inaccessible/ doesn't exist. In these cases, we should skip
tests to avoid unnecessary errors.
See also https://github.com/systemd/systemd/pull/4243#issuecomment-253665566
|
|
(Also, let's not use the binary |= operator on "bool" variables).
Fix-up for 93a0884126146361ca078ec627da2cf766205a1c.
|
|
various nss module/resolved fixes
|
|
Various seccomp fixes and NEWS update.
|
|
Properly synthesize -.slice and init.scope
|
|
|
|
callbacks
Previously, we'd synthesize the root slice unit and the init scope unit in the
enumerator callbacks for the unit type. This is problematic if either of them
is already referenced from a unit that is loaded as result of another unit
type's enumerator logic.
Let's clean this up and simply create the two objects from the enumerator
callbacks, if they are not around yet. Do the actual filling in of the settings
from the unit_load() callbacks, to match how other units are loaded.
Fixes: #4322
|
|
Let's tighten the cases when our module returns NSS_STATUS_NOTFOUND. Let's do
so only if we actually managed to talk to resolved. In all other cases stick to
NSS_STATUS_UNAVAIL as before, as it clearly indicates that our module or the
system is borked, and the "dns" fallback should really take place.
In particular this fixes the 2nd-level fallback from our own dlopen() based
fallback handling. In this case we really should return UNAVAIL so that the
caller can apply its own fallback still.
Fix-up for d7247512a904f1dd74125859d8da66166c2a6933.
Note that our own dlopen() based fallback is pretty much redundant now if
nsswitch.conf is configured like this:
hosts: files mymachines resolve [!UNAVAIL=return] dns myhostname
In a future release we should probably drop our internal fallback then, in
favour of this nsswitch.conf-based one.
|
|
Fix-up for #4164
|
|
This validates the system call set table and many of our seccomp-util.c APIs.
|
|
This allows us to unify most of the code in apply_protect_kernel_modules() and
apply_private_devices().
|
|
"oldumount()" is not a syscall, but simply a wrapper for it, the actual syscall
nr is called "umount" (and the nr of umount() is called umount2 internally).
"sysctl()" is not a syscall, but "_syscall()" is. Fix this in the table.
Without these changes libseccomp cannot actually translate the tables in full.
This wasn't noticed before as the code was written defensively for this case.
|
|
This adds a new seccomp_init_conservative() helper call that is mostly just a
wrapper around seccomp_init(), but turns off NNP and adds in all secondary
archs, for best compatibility with everything else.
Pretty much all of our code used the very same constructs for these three
steps, hence unifying this in one small function makes things a lot shorter.
This also changes incorrect usage of the "scmp_filter_ctx" type at various
places. libseccomp defines it as typedef to "void*", i.e. it is a pointer type
(pretty poor choice already!) that casts implicitly to and from all other
pointer types (even poorer choice: you defined a confusing type now, and don't
even gain any bit of type safety through it...). A lot of the code assumed the
type would refer to a structure, and hence aded additional "*" here and there.
Remove that.
|
|
seccomp_add_syscall_filter_set()
Let's simplify this call, by making use of the new infrastructure.
This is actually more in line with Djalal's original patch but instead of
search the filter set in the array by its name we can now use the set index and
jump directly to it.
|
|
A variety of fixes:
- rename the SystemCallFilterSet structure to SyscallFilterSet. So far the main
instance of it (the syscall_filter_sets[] array) used to abbreviate
"SystemCall" as "Syscall". Let's stick to one of the two syntaxes, and not
mix and match too wildly. Let's pick the shorter name in this case, as it is
sufficiently well established to not confuse hackers reading this.
- Export explicit indexes into the syscall_filter_sets[] array via an enum.
This way, code that wants to make use of a specific filter set, can index it
directly via the enum, instead of having to search for it. This makes
apply_private_devices() in particular a lot simpler.
- Provide two new helper calls in seccomp-util.c: syscall_filter_set_find() to
find a set by its name, seccomp_add_syscall_filter_set() to add a set to a
seccomp object.
- Update SystemCallFilter= parser to use extract_first_word(). Let's work on
deprecating FOREACH_WORD_QUOTED().
- Simplify apply_private_devices() using this functionality
|
|
|
|
Let's prefer early-exit over deep-indented if blocks. Not behavioural change.
|
