summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-10-23core: first lookup and cache creds then apply them after namespace setupDjalal Harouni
This fixes: https://github.com/systemd/systemd/issues/4357 Let's lookup and cache creds then apply them. We also switch from getgroups() to getgrouplist().
2016-10-22core: do not set no_new_privileges flag in config_parse_syscall_filterZbigniew Jędrzejewski-Szmek
If SyscallFilter was set, and subsequently cleared, the no_new_privileges flag was not reset properly. We don't need to set this flag here, it will be set automatically in unit_patch_contexts() if syscall_filter is set.
2016-10-22Merge pull request #4428 from lnykryn/ctrl_v2Zbigniew Jędrzejewski-Szmek
rename failure-action to emergency-action and use it for ctrl+alt+del burst
2016-10-22tree-wide: make parse_proc_cmdline() strip "rd." prefix automaticallyZbigniew Jędrzejewski-Szmek
This stripping is contolled by a new boolean parameter. When the parameter is true, it means that the caller does not care about the distinction between initrd and real root, and wants to act on both rd-dot-prefixed and unprefixed parameters in the initramfs, and only on the unprefixed parameters in real root. If the parameter is false, behaviour is the same as before. Changes by caller: log.c (systemd.log_*): changed to accept rd-dot-prefix params pid1: no change, custom logic cryptsetup-generator: no change, still accepts rd-dot-prefix params debug-generator: no change, does not accept rd-dot-prefix params fsck: changed to accept rd-dot-prefix params fstab-generator: no change, custom logic gpt-auto-generator: no change, custom logic hibernate-resume-generator: no change, does not accept rd-dot-prefix params journald: changed to accept rd-dot-prefix params modules-load: no change, still accepts rd-dot-prefix params quote-check: no change, does not accept rd-dot-prefix params udevd: no change, still accepts rd-dot-prefix params I added support for "rd." params in the three cases where I think it's useful: logging, fsck options, journald forwarding options.
2016-10-22udev: change kernel commandline option parsingZbigniew Jędrzejewski-Szmek
- do not crash if an option without value is specified on the kernel command line, e.g. "udev.log-priority" :P - simplify the code a bit - warn about unknown "udev.*" options — this should make it easier to spot typos and reduce user confusion
2016-10-22journald: convert journald to use parse_proc_cmdlineZbigniew Jędrzejewski-Szmek
This makes journald use the common option parsing functionality. One behavioural change is implemented: "systemd.journald.forward_to_syslog" is now equivalent to "systemd.journald.forward_to_syslog=1". I think it's nicer to use this way.
2016-10-22tree-wide: allow state to be passed through to parse_proc_cmdline_itemZbigniew Jędrzejewski-Szmek
No functional change.
2016-10-22journal: remove unused variableThomas Hindoe Paaboel Andersen
2016-10-21journald: systemd.journald.max_level_* kernel command line options (#4427)Umut Tezduyar Lindskog
The log forward levels can be configured through kernel command line.
2016-10-21vconsole: skip unnecessary udev call for dummy deviceMichal Soltys
In particular, the font copying has no chance of succeeding as the required functionality is not implemented, see: drivers/video/console/dummycon.c
2016-10-21Merge pull request #4447 from poettering/oneshotassertfixDaniel Mack
core: if the start command vanishes during runtime don't hit an assert
2016-10-21core: use emergency_action for ctr+alt+del burstLukas Nykryn
Fixes #4306
2016-10-21failure-action: generalize failure action to emergency actionLukas Nykryn
2016-10-21Merge pull request #4419 from keszybz/install-specifiersLennart Poettering
Fix expansion of %i, %u, %N, %n install specifiers
2016-10-21sysusers: fix memleak (#4443)Evgeny Vereshchagin
Fixes: Oct 20 09:10:49 systemd-sysusers[144]: Direct leak of 20 byte(s) in 1 object(s) allocated from: Oct 20 09:10:49 systemd-sysusers[144]: #0 0x7f3565a13e60 in malloc (/lib64/libasan.so.3+0xc6e60) Oct 20 09:10:49 systemd-sysusers[144]: #1 0x7f3565526bd0 in malloc_multiply src/basic/alloc-util.h:70 Oct 20 09:10:49 systemd-sysusers[144]: #2 0x7f356552cb55 in tempfn_xxxxxx src/basic/fileio.c:1116 Oct 20 09:10:49 systemd-sysusers[144]: #3 0x7f356552c4f0 in fopen_temporary src/basic/fileio.c:1042 Oct 20 09:10:49 systemd-sysusers[144]: #4 0x7f356555e00e in fopen_temporary_label src/basic/fileio-label.c:63 Oct 20 09:10:49 systemd-sysusers[144]: #5 0x56197c4a1766 in make_backup src/sysusers/sysusers.c:209 Oct 20 09:10:49 systemd-sysusers[144]: #6 0x56197c4a6335 in write_files src/sysusers/sysusers.c:710 Oct 20 09:10:49 systemd-sysusers[144]: #7 0x56197c4ae571 in main src/sysusers/sysusers.c:1817 Oct 20 09:10:49 systemd-sysusers[144]: #8 0x7f3564dee730 in __libc_start_main (/lib64/libc.so.6+0x20730)
2016-10-21core: if the start command vanishes during runtime don't hit an assertLennart Poettering
This can happen when the configuration is changed and reloaded while we are executing a service. Let's not hit an assert in this case. Fixes: #4444
2016-10-21Revert "add networkd dbus lease info" (#4435)Zbigniew Jędrzejewski-Szmek
2016-10-21nspawn, NEWS: add missing "s" in --private-users-chown (#4438)Zbigniew Jędrzejewski-Szmek
2016-10-20sysusers: fix memleak (#4430)Evgeny Vereshchagin
Fixes: ``` ==28075== 64 bytes in 1 blocks are definitely lost in loss record 2 of 3 ==28075== at 0x4C2BAEE: malloc (vg_replace_malloc.c:298) ==28075== by 0x4C2DCA1: realloc (vg_replace_malloc.c:785) ==28075== by 0x4ED40A2: greedy_realloc (alloc-util.c:57) ==28075== by 0x4E90F87: extract_first_word (extract-word.c:78) ==28075== by 0x4E91813: extract_many_words (extract-word.c:270) ==28075== by 0x10FE93: parse_line (sysusers.c:1325) ==28075== by 0x11198B: read_config_file (sysusers.c:1640) ==28075== by 0x111EB8: main (sysusers.c:1773) ==28075== ```
2016-10-20update-utmp: let's use STR_IN_SET() where it is prettyLennart Poettering
2016-10-20logind: don't hit assert when we try to free NULL manager objectLennart Poettering
Fixes: #4431
2016-10-20tests: fix memleak in test-calendarspec (#4424)Evgeny Vereshchagin
Fixes: ``` ==10750== ==10750== HEAP SUMMARY: ==10750== in use at exit: 96 bytes in 3 blocks ==10750== total heap usage: 1,711 allocs, 1,708 frees, 854,545 bytes allocated ==10750== ==10750== 96 (64 direct, 32 indirect) bytes in 1 blocks are definitely lost in loss record 3 of 3 ==10750== at 0x4C2DA60: calloc (vg_replace_malloc.c:711) ==10750== by 0x4EB3BDA: calendar_spec_from_string (calendarspec.c:771) ==10750== by 0x109675: test_hourly_bug_4031 (test-calendarspec.c:118) ==10750== by 0x10A00E: main (test-calendarspec.c:202) ==10750== ==10750== LEAK SUMMARY: ==10750== definitely lost: 64 bytes in 1 blocks ==10750== indirectly lost: 32 bytes in 2 blocks ==10750== possibly lost: 0 bytes in 0 blocks ==10750== still reachable: 0 bytes in 0 blocks ==10750== suppressed: 0 bytes in 0 blocks ==10750== ==10750== For counts of detected and suppressed errors, rerun with: -v ==10750== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0) ```
2016-10-20shared/install: fix %u expansion when running under sudoZbigniew Jędrzejewski-Szmek
Test case: [Install] DefaultInstance=bond1 WantedBy= foobar-U-%U.device WantedBy= foobar-u-%u.device $ sudo systemctl --root=/ enable testing4@.service (before) Created symlink /etc/systemd/system/foobar-U-0.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. Created symlink /etc/systemd/system/foobar-u-zbyszek.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. (after) Created symlink /etc/systemd/system/foobar-U-0.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. Created symlink /etc/systemd/system/foobar-u-root.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. It doesn't make much sense to use a different user for %U and %u.
2016-10-20shared/install: fix DefaultInstance expansion in %n, %NZbigniew Jędrzejewski-Szmek
We should substitute DefaultInstance if the instance is not specified. Test case: [Install] DefaultInstance=bond1 WantedBy= foobar-n-%n.device WantedBy= foobar-N-%N.device $ systemctl --root=/ enable testing4@.service Created symlink /etc/systemd/system/foobar-n-testing4@bond1.service.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. Created symlink /etc/systemd/system/foobar-N-testing4@bond1.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. (before, the symlink would be created with empty %n, %N parts).
2016-10-20shared/install: fix DefaultInstance expansion in %iZbigniew Jędrzejewski-Szmek
We should substitute DefaultInstance if the instance is not specified. Test case: [Install] DefaultInstance=bond1 WantedBy= foobar-i-%i.device $ systemctl --root=/ enable testing4@.service Created symlink /etc/systemd/system/foobar-i-bond1.device.wants/testing4@bond1.service → /etc/systemd/system/testing4@.service. (before, the symlink would be created as /etc/systemd/system/foobar-i-.device.wants/testing4@bond1.service) Fixes #4411.
2016-10-20journald,core: add short comments we we keep reopening /dev/console all the timeLennart Poettering
Just to make sure the next one reading this isn't surprised that the fd isn't kept open. SAK and stuff... Fix suggested: https://github.com/systemd/systemd/pull/4366#issuecomment-253659162
2016-10-20Merge pull request #4417 from keszybz/man-and-rlimitLennart Poettering
Two unrelated patches: man page tweaks and rlimit log levels
2016-10-19pid1: downgrade some rlimit warningsZbigniew Jędrzejewski-Szmek
Since we ignore the result anyway, downgrade errors to warning. log_oom() will still emit an error, but that's mostly theoretical, so it is not worth complicating the code to avoid the small inconsistency
2016-10-19core: let's upgrade the log level for service processes dying of signal (#4415)Lennart Poettering
As suggested in https://github.com/systemd/systemd/pull/4367#issuecomment-253670328
2016-10-20Merge pull request #4360 from fbuihuu/journald-fix-flush-when-restartingLennart Poettering
Journald fix flush when restarting (#4190)
2016-10-19Merge pull request #4390 from keszybz/install-specifiersLennart Poettering
Various install-related tweaks
2016-10-19bootctl: don't try to remove esp_path (#4407)Evgeny Vereshchagin
This is a follow-up for 9ee051b9c7623
2016-10-19boot: fix `bootctl install` segfault (#4404)Yu Watanabe
2016-10-19journal: rename determine_space_for() into cache_space_refresh()Franck Bui
Now that determine_space_for() only deals with storage space (cached) values, rename it so it reflects the fact that only the cached storage space values are updated.
2016-10-19journal: introduce patch_min_use() helperFranck Bui
Updating min_use is rather an unusual operation that is limited when we first open the journal files, therefore extracts it from determine_space_for() and create a function of its own and call this new function when needed. determine_space_for() is now dealing with storage space (cached) values only. There should be no functional changes.
2016-10-19journal: introduce cache_space_invalidate()Franck Bui
Introduce a dedicated helper in order to reset the storage space cache.
2016-10-19journal: cache used vfs stats as wellFranck Bui
The set of storage space values we cache are calculated according to a couple of filesystem statistics (free blocks, block size). This patch caches the vfs stats we're interested in so these values are available later and coherent with the rest of the space cached values.
2016-10-19journal: don't emit space usage message when opening the journal (#4190)Franck Bui
This patch makes system_journal_open() stop emitting the space usage message. The caller is now free to emit this message when appropriate. When restarting the journal, we can now emit the message *after* flushing the journal (if required) so that all flushed log entries are written in the persistent journal *before* the status message. This is required since the status message is always younger than the flushed entries. Fixes #4190.
2016-10-19journal: introduce server_space_usage_message()Franck Bui
This commit simply extracts from determine_space_for() the code which emits the storage usage message and put it into a function of its own so it can be reused by others paths later. No functional changes.
2016-10-19journal: introduce JournalStorage and JournalStorageSpace structuresFranck Bui
This structure keeps track of specificities for a given journal type (persistent or volatile) such as metrics, name, etc... The cached space values are now moved in this structure so that each journal has its own set of cached values. Previously only one set existed and we didn't know if the cached values were for the runtime journal or the persistent one. When doing: determine_space_for(s, runtime_metrics, ...); determine_space_for(s, system_metrics, ...); the second call returned the cached values for the runtime metrics.
2016-10-19journal: introduce determine_path_usage()Franck Bui
This commit simply extracts from determine_space_for() the code which determines the FS usage where the passed path lives (statvfs(3)) and put it into a function of its own so it can be reused by others paths later. No functional changes.
2016-10-18shared/install: report invalid unit files slightly betterZbigniew Jędrzejewski-Szmek
When a unit file is invalid, we'd return an error without any details: $ systemctl --root=/ enable testing@instance.service Failed to enable: Invalid argument. Fix things to at least print the offending file name: $ systemctl enable testing@instance.service Failed to enable unit: File testing@instance.service: Invalid argument $ systemctl --root=/ enable testing@instance.service Failed to enable unit, file testing@instance.service: Invalid argument. A real fix would be to pass back a proper error message from conf-parser. But this would require major surgery, since conf-parser functions now simply print log errors, but we would need to return them over the bus. So let's just print the file name, to indicate where the error is. (Incomplete) fix for #4210.
2016-10-18shared/install: resolve specifiers in Also=Zbigniew Jędrzejewski-Szmek
Test case: [Install] WantedBy= default.target Also=getty@%p.service $ ./systemctl --root=/ enable testing@instance.service Created symlink /etc/systemd/system/default.target.wants/testing@instance.service → /etc/systemd/system/testing@.service. Created symlink /etc/systemd/system/getty.target.wants/getty@testing.service → /usr/lib/systemd/system/getty@.service. $ ./systemctl --root=/ disable testing@instance.service Removed /etc/systemd/system/getty.target.wants/getty@testing.service. Removed /etc/systemd/system/default.target.wants/testing@instance.service. Fixes part of #4210. Resolving specifiers in DefaultInstance seems to work too: [Install] WantedBy= default.target DefaultInstance=%u $ systemctl --root=/ enable testing3@instance.service Created symlink /etc/systemd/system/default.target.wants/testing3@instance.service → /etc/systemd/system/testing3@.service. $ systemctl --root=/ enable testing3@.service Created symlink /etc/systemd/system/default.target.wants/testing3@zbyszek.service → /etc/systemd/system/testing3@.service.
2016-10-18shared/install: provide more info if install_info_traverse_failsZbigniew Jędrzejewski-Szmek
Test case: [Install] WantedBy= default.target Also=foobar-unknown.service Before: $ systemctl --root=/ enable testing2@instance.service Failed to enable: No such file or directory. After $ ./systemctl --root=/ enable testing2@instance.service Failed to enable unit, file foobar-unknown.service: No such file or directory.
2016-10-18shared/install: in install_context_mark_for_removal ignore not found unitsZbigniew Jędrzejewski-Szmek
With the following test case: [Install] WantedBy= default.target Also=foobar-unknown.service disabling would fail with: $ ./systemctl --root=/ disable testing.service Cannot find unit foobar-unknown.service. # this is level debug Failed to disable: No such file or directory. # this is the error After the change we proceed: $ ./systemctl --root=/ disable testing.service Cannot find unit foobar-unknown.service. Removed /etc/systemd/system/default.target.wants/testing.service. This does not affect specifying a missing unit directly: $ ./systemctl --root=/ disable nosuch.service Failed to disable: No such file or directory.
2016-10-18Merge pull request #4382 from keszybz/unit-type-underlineLennart Poettering
systemctl: use underlines to seperate unit types in listing
2016-10-17networkd: use proper cast to access VTI6 (#4399)Susant Sahani
Fixes #4371.
2016-10-17core/exec: add a named-descriptor option ("fd") for streams (#4179)Luca Bruno
This commit adds a `fd` option to `StandardInput=`, `StandardOutput=` and `StandardError=` properties in order to connect standard streams to externally named descriptors provided by some socket units. This option looks for a file descriptor named as the corresponding stream. Custom names can be specified, separated by a colon. If multiple name-matches exist, the first matching fd will be used.
2016-10-17terminal-util: helper macro for highlighting functionsZbigniew Jędrzejewski-Szmek
2016-10-17systemctl: ditto for list-unit-filesZbigniew Jędrzejewski-Szmek