summaryrefslogtreecommitdiff
path: root/test/networkd-test.py
AgeCommit message (Collapse)Author
2017-02-09tests: show journal on systemd-resolved.service failures (#5297)Martin Pitt
In networkd-test.py, show resolved's journal on failure, to debug issues like https://github.com/systemd/systemd/pull/5283.
2016-12-26tests: more precise negative check for dnsmasq log (#4982)Martin Pitt
In test_resolved_domain_restricted_dns(), add dot domain separator to negative .lab/.company tests, so that we don't catch these as part of the host name (like "lxc-labjfr"). Caught in PR #4962
2016-12-22resolved: correctly handle non-address RR types with /etc/hosts lookups (#4808)Martin Pitt
Fix wrong condition test in manager_etc_hosts_lookup(), which caused it to return an IPv4 answer when an IPv6 question was asked, and vice versa. Also only return success if we actually found any A or AAAA record. In systemd-resolved.service(8), point out that /etc/hosts mappings only affect address-type lookups, not other types. The test case currently disables DNSSEC in resolved, as there is a bug where "-t MX" fails due to "DNSSEC validation failed" even after "downgrading to non-DNSSEC mode". This should be dropped once that bug gets fixed. Fixes #4801
2016-12-07network: support negation in matching patterns (#4809)David Michael
2016-12-02Merge pull request #4228 from dm0-/coreos-1554Zbigniew Jędrzejewski-Szmek
networkd: support marking links unmanaged
2016-12-01python: use raw strings for regexp patternsZbigniew Jędrzejewski-Szmek
Behaviour is not changed, because "unknown" escapes like \s or \d were not substituted, but it's much nicer to use raw strings to avoid ambiguity.
2016-12-01python: adjust imports, indentation, unused variables following pylint adviceZbigniew Jędrzejewski-Szmek
2016-12-01networkd: support marking links unmanagedDavid Michael
2016-12-01networkd-test: define a utility class to simplify testsDavid Michael
2016-11-30test: retry checking for transient hostname in hostnamectl (#4769)Martin Pitt
Sometimes setting the transient hostname does not happen synchronously, so retry up to five times. It is not yet clear whether this is legitimate behaviour or an underlying bug, but this will at least show whether the wrong transient hostname is just a race condition or permanently wrong. Fixes #4753
2016-11-28test: make transient hostname tests fail verbosely (#4754)Martin Pitt
This test fails sometimes but it is hard to reproduce, so we need more information what happens. Set journal log level to "debug" for the entirety of networkd-test.py, and show networkd's and hostnamed's journals and the DHCP server log on failure of the two test_transient_hostname* tests. Also sync the journal before querying it to get more precise output. This should help with tracking down issue #4753.
2016-11-23networkd: allow networkd to set the timezone in timedatedMartin Pitt
systemd-networkd runs as user "systemd-network" and thus is not privileged to set the timezone acquired from DHCP: systemd-networkd[4167]: test_eth42: Could not set timezone: Interactive authentication required. Similarly to commit e8c0de912, add a polkit rule to grant org.freedesktop.timedate1.set-timezone to the "systemd-network" system user. Move the polkit rules from src/hostname/ to src/network/ to avoid too many small distributed policy snippets (there might be more in the future), as it's easier to specify the privileges for a particular subject in this case. Add NetworkdClientTest.test_dhcp_timezone() test case to verify this (for all people except those in Pacific/Honolulu, there the test doesn't prove anything -- sorry ☺ ).
2016-11-21tests: check transient hostname with and without static hostnameMartin Pitt
We expect a static hostname to win over a transient one, so test both cases.
2016-11-20hostnamed: allow networkd to set the transient hostnameMartin Pitt
systemd-networkd runs as user "systemd-network" and thus is not privileged to set the transient hostname: systemd-networkd[516]: ens3: Could not set hostname: Interactive authentication required. Standard polkit *.policy files do not have a syntax for granting privileges to a user, so ship a pklocalauthority (for polkit < 106) and a JavaScript rules file (for polkit >= 106) that grants the "systemd-network" system user that privilege. Add DnsmasqClientTest.test_transient_hostname() test to networkd-test.py to cover this. Make do_test() a bit more flexible by interpreting "coldplug==None" as "test sets up the interface by itself". Change DnsmasqClientTest to set up test_eth42 with a fixed MAC address so that we can configure dnsmasq to send a special host name for that. Fixes #4646
2016-11-20test: clean up "dummy0" interface after each test case in networkd-test.pyMartin Pitt
2016-09-30resolved: don't query domain-limited DNS servers for other domains (#3621)Martin Pitt
DNS servers which have route-only domains should only be used for the specified domains. Routing queries about other domains there is a privacy violation, prone to fail (as that DNS server was not meant to be used for other domains), and puts unnecessary load onto that server. Introduce a new helper function dns_server_limited_domains() that checks if the DNS server should only be used for some selected domains, i. e. has some route-only domains without "~.". Use that when determining whether to query it in the scope, and when writing resolv.conf. Extend the test_route_only_dns() case to ensure that the DNS server limited to ~company does not appear in resolv.conf. Add test_route_only_dns_all_domains() to ensure that a server that also has ~. does appear in resolv.conf as global name server. These reproduce #3420. Add a new test_resolved_domain_restricted_dns() test case that verifies that domain-limited DNS servers are only being used for those domains. This reproduces #3421. Clarify what a "routing domain" is in the manpage. Fixes #3420 Fixes #3421
2016-09-16networkd: support drop-in directories for .network filesJean-Sébastien Bour
Fixes #3655. [zj: Fix the tests.]
2016-09-16networkd-test: add a helper function to always clean up temporary config filesZbigniew Jędrzejewski-Szmek
2016-06-30test: check resolved generated resolv.conf in networkd-test (#3628)Martin Pitt
* test: check resolved generated resolv.conf in networkd-test Directly verify the contents of /run/systemd/resolve/resolv.conf instead of /etc/resolv.conf. The latter might be a plain file or a symlink to something else (like Debian's resolvconf output), and in these cases we cannot make strong assumptions about the contents. Drop the "/etc/resolv.conf is a symlink" conditions and the "resolv.conf can have at most three nameservers" alternatives, as we know that resolved always adds all nameservers. Explicitly start resolved at the start of a test to ensure that it is running. * test: get along with existing system search domains in resolv.conf The previous change has uncovered a bug in the tests: Existing search domains can exist in resolv.conf which test_search_domains{,_too_long} didn't take into account. As existing domains take some of the "max 6 domains" and "max 255 chars" limit, don't expect that the last items from our test data actually appears in the output, just the first few.
2016-06-28resolved: add test for route-only domain filtering (#3609)Martin Pitt
With commit 6f7da49d00 route-only domains do not get put into resolv.conf's "search" list any more. Add a comment about the tri-state, to clarify its semantics and why we are passing a bool parameter into an int type. Also add a test case for it.
2016-06-07networkd: rename IPv6AcceptRouterAdvertisements to IPv6AcceptRALennart Poettering
The long name is just too hard to type. We generally should avoid using acronyms too liberally, if they aren't established enough, but it appears that "RA" is known well enough. Internally we call the option "ipv6_accept_ra" anyway, and the kernel also exposes it under this name. Hence, let's rename the IPv6AcceptRouterAdvertisements= setting and the [IPv6AcceptRouterAdvertisements] section to IPv6AcceptRA= and [IPv6AcceptRA]. The old setting IPv6AcceptRouterAdvertisements= is kept for compatibility with older configuration. (However the section [IPv6AcceptRouterAdvertisements] is not, as it was never available in a published version of systemd.
2016-06-03resolved: fix comments in resolve.conf for search domain overflows (#3422)Martin Pitt
Write comments about "too many search domains" and "Total length of all search domains is too long" just once. Also put it on a separate line, as resolv.conf(5) only specifies comments in a line by themselves. This is ugly to do if write_resolv_conf_search() gets called once for every search domain. So change it to receive the complete OrderedSet instead and do the iteration by itself. Add test cases to networkd-test.py. https://launchpad.net/bugs/1588229
2016-04-26tests: document requirements of networkd integration tests (#3125)Martin Pitt
Document the necessary dependencies and nspawn/lxd options to run test/networkd-test.py.
2015-11-27tests: add networkd integration testMartin Pitt
This uses temporary configuration in /run and temporary veth devices, and does not write anything on disk or change any system configuration; but it assumes (and checks at the beginning) that networkd is not currently running. This can be run on a normal installation, in QEMU, nspawn, or LXC. As this requires root privileges, this is not integrated into "make check".