| Age | Commit message (Collapse) | Author |
|---|
|
|
|
<ogasawara@osdl.org>
|
|
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
|
|
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
|
|
Here is a small name change, so all expected values are named exp_*
|
|
|
|
|
|
|
|
|
|
> Nice, that's a good start. Now we need to check the major:minor values
> too somehow...
I better do it immediately, before you put it in the empty TODO :)
Patch is a bit big, cause spaces are changed to tabs to get
space for the longer names.
|
|
> Any chance on being able to add a test for this kind of stuff to the
> udev-test.pl script?
Sure, not brilliant but seems to work :)
Only numeric id's are supported so far.
|
|
Here is a test for the "symlink only" rule.
Any reason to do the apply_format() inside the loop?
I've changed it.
|
|
Martin Schwenke <martin@meltin.net> asked for this feature and posted a
patch:
The following patch almost let's me have the following configuration:
PROGRAM="/sbin/aliaser %b %k %n %M %m", RESULT="?*", NAME="%c{1}", SYMLINK="%c{2+}"
allowing me to specify an arbitrary number of symlinks by saying
"giveme the second and later words"."
Here is the actual version with tests and a few words in the man page.
|
|
Here I change the callout fork logic.
The current cersion is unable to read a pipe which is not flushed at once,
Now we read until it's closed.
The maximum argument count is calculated by the strlen now. We have 100
chars for our result buffer so we can't have more than 50 parameters.
So it's much more clear what will happen now and not some magic boundary
where we use shell behind it.
Parameter can be combined to one by using apostrophes.
this on works now:
BUS="scsi", PROGRAM="/bin/sh -c 'echo foo3 foo4 foo5 foo6 foo7 foo8 foo9 | sed s/foo9/bar9/'", KERNEL="sda3", NAME="%c{7}"
Two new test are also added.
|
|
Hey, it may never happen, that one wants to distinguish attributes by
trailing spaces, but we should not lose the control over it, just for
being lazy :)
Here we remove the trailing spaces of the sysfs attribute only if the
configured value to match doesn't have any trailing spaces by itself.
So if you put a attribute in a rule with spaces at the end, the sysfs
attribute _must_ match exactly.
Is that cool for everyone?
As usual, 2 tests are added for it with a artificial sysfs file and
a few words to the man page.
|
|
Here is a patch for some new tests.
|
|
We carried the the old callout part selector syntax for two releases
now after it was replaced by the new %c{1} syntax. So here we remove
the old syntax and use the code to possibly specify the maximum count
of chars to insert into the string. It will work with all of our format
chars.
I don't know if somebody will use it, but the code is already there :)
's%3s{vendor}' returns "IBM" now, instead of "IBM-ESXS".
Also added is a test for it and a few words in the man page.
|
|
If we go over our internal limit of 7, then we call out to /bin/sh
otherwise we handle it ourself without relying on a shell.
|
|
|
|
Here we change the magic callout part number selector to the new
atribute syntax. The syntax to select the second part of the callout string:
'%2c' is now '%c{2}'
I think it's more clear and we no longer misuse the length argument.
The old syntax is still supported, but we should remove it some
time in the future.
|
|
Here we switch the configs and man pages to the new attribute syntax.
Also the 'partition trick' is mentioned in udev.8
I think it's more clear visible now, that inside the brackets are user
supplied values used and not some magic keys handled:
'SYSFS_dev' is now 'SYSFS{dev}'
The old syntax is still supported.
|
|
Patch against current udev bk to add a few ID rule tests.
|
|
Here is the first try to create all partitons of a blockdevice, since
removable media devices may need to acces the expected partition to
revalidate the media.
It uses the attribute syntax introduced with the last %s{file} patch.
I'm using this with my multi-slot-flash-card-reader:
SYSFS{model}="USB Storage-SMC ", NAME{all_partitions}="smartmedia"
SYSFS{model}="USB Storage-CFC ", NAME{all_partitions}="compactflash"
SYSFS{model}="USB Storage-MSC ", NAME{all_partitions}="memorystick"
SYSFS{model}="USB Storage-MMC ", NAME{all_partitions}="multimedia"
and I get:
tree /udev/
/udev/
|-- memorystick
|-- memorystick1
|-- memorystick10
|-- memorystick11
|-- memorystick12
|-- memorystick13
|-- memorystick14
|-- memorystick15
|-- memorystick2
|-- memorystick3
|-- memorystick4
|-- memorystick5
|-- memorystick6
|-- memorystick7
|-- memorystick8
|-- memorystick9
|-- multimedia
|-- multimedia1
|-- multimedia10
|-- multimedia11
|-- multimedia12
|-- multimedia13
|-- multimedia14
|-- multimedia15
|-- multimedia2
|-- multimedia3
|-- multimedia4
|-- multimedia5
|-- multimedia6
|-- multimedia7
|-- multimedia8
|-- multimedia9
...
If needed, we can make the number of partions to create
adjustable with the attribute?
|
|
On Sun, Feb 15, 2004 at 03:36:00AM +0100, Kay Sievers wrote:
>
> Since we have %s{file} it may be nice to allow SYSFS{file}.
> This patch allows:
>
> BUS="usb", SYSFS{idProduct}="a511", NAME="video%n"
>
> compared to the current:
>
> BUS="usb", SYSFS_idProduct="a511", NAME="video%n"
>
> The curent syntax is still supported.
> Looks a bit nicer and less hackish, I think.
Better patch with infrastructure to easily implement KEY{attribute}
for every other key. The first user is the SYSFS{file} key.
Both versions, brackets or underscore is supported for the attribute.
|
|
On Thu, Feb 12, 2004 at 05:34:57PM -0800, Greg KH wrote:
> On Tue, Feb 10, 2004 at 09:14:20AM +0100, Hannes Reinecke wrote:
> > Hi all,
> >
> > this patch makes the format for NAME and SYMLINK a bit more flexible:
> > I've added a new format specifier '%s{<SYSFS_var>}', which allows for
> > the value of any sysfs entry found for this device to be inserted.
> > Example (for our S/390 fcp adapter):
> >
> > BUS="ccw", SYSFS_devtype="1732/03", NAME="%k" \
> > SYMLINK="zfcp-%s{hba_id}-%s{wwpn}:%s{fcp_lun}"
> >
> > I know this could also be done with an external program, but having this
> > incorporated into udev makes life easier, especially if run from
> > initramfs. Plus it makes the rules easier to follow, as the result is
> > directly visible and need not to be looked up in some external program.
> >
> > Comments etc. welcome.
>
> Oops, sorry I missed this for the 017 release. I'll look at it tomorrow
> and get back to you. At first glance it looks like a good thing.
>
> Oh, you forgot to update the documentation, that's important to do if
> you want this change to make it in :)
I took a part of the code and made a version that uses already implemented
attribute finding logic.
The parsing of the format length '%3x' and the '%x{attribute}' is a fuction now,
maybe there are more possible users in the future.
I've also added the test to udev-test.pl.
|
|
|
|
just put the test number on the command line:
udev-test.pl 3
will run test number 3
If no test number is specified, all of the tests will be run, just like before.
|
|
|
|
rule applies to.
This should fix one of the more annoying things to me about udev, and
gets rid of a TODO item.
|
|
Kill the two tests with %D.
|
|
This patch adds a '%' to the format char list, so that a external
program may called with a non expanded '%' like:
PROGRAM="/bin/date +%%s"
Olaf Hering asked for the feature.
A tricky test is also added :)
|
|
> Hi,
> as promised yesterday, here is a patch that drops the explicit methods
> given in the udev config and implement only one type of rule.
>
> A rule now consists only of a number of keys to match. All known keys
> are valid in any combination. The former configs should work with a few
> changes:
>
> o the "<METHOD>, " at the beginning of the line should be removed
>
> o the result of the externel program is matched with RESULT= instead if ID=
> the PROGRAM= key is only valid if the program exits with zero
> (just exit with nozero in a script if the rule should not match)
>
> o rules are processed in order they appear in the file, no priority
>
> o if NAME="" is given, udev is instructed to ignore this device,
> no node will be created
>
>
> EXAMPLE:
>
> # combined BUS, SYSFS and KERNEL
> BUS="usb", KERNEL="video*", SYSFS_model="Creative Labs WebCam*", NAME="test/webcam%n"
>
> # exec script only for the first ide drive (hda), all other will be skipped
> BUS="ide", KERNEL="hda*", PROGRAM="/home/kay/src/udev.kay/extras/ide-devfs.sh %k %b %n", RESULT="hd*", NAME="%1c", SYMLINK="%2c %3c"
>
>
> The udev-test.pl and test.block works fine here.
> Please adapt your config and give it a try.
>
Here is a slightly better version of the patch.
After a conversation with Patrick, we are now able to execute the PROGRAM
and also match in all following rules with the RESULT value from this exec.
EXAMPLE:
We have 7 rules with RESULT and 2 with PROGRAM.
Only the 5th rule matches with the callout result from the exec in the 4th rule.
RULES:
PROGRAM="/bin/echo abc", RESULT="no_match", NAME="web-no-2"
KERNEL="video*", RESULT="123", NAME="web-no-3"
KERNEL="video*", RESULT="123", NAME="web-no-4"
PROGRAM="/bin/echo 123", RESULT="no_match", NAME="web-no-5"
KERNEL="video*", RESULT="123", NAME="web-yes"
RESULT:
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: process rule
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check PROGRAM
Jan 11 23:36:52 pim udev[26050]: execute_program: executing '/bin/echo abc'
Jan 11 23:36:52 pim udev[26050]: execute_program: result is 'abc'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: PROGRAM returned successful
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check for RESULT dev->result='no_match', udev->program_result='abc'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: RESULT is not matching
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: process rule
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check for KERNEL dev->kernel='video*' class_dev->name='video0'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: KERNEL matches
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check for RESULT dev->result='123', udev->program_result='abc'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: RESULT is not matching
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: process rule
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check for KERNEL dev->kernel='video*' class_dev->name='video0'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: KERNEL matches
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check for RESULT dev->result='123', udev->program_result='abc'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: RESULT is not matching
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: process rule
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check PROGRAM
Jan 11 23:36:52 pim udev[26050]: execute_program: executing '/bin/echo 123'
Jan 11 23:36:52 pim udev[26050]: execute_program: result is '123'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: PROGRAM returned successful
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check for RESULT dev->result='no_match', udev->program_result='123'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: RESULT is not matching
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: process rule
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check for KERNEL dev->kernel='video*' class_dev->name='video0'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: KERNEL matches
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: check for RESULT dev->result='123', udev->program_result='123'
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: RESULT matches
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: found matching rule, 'video*' becomes ''
Jan 11 23:36:52 pim udev[26050]: namedev_name_device: name, 'web-yes' is going to have owner='', group='', mode = 0600
|
|
|
|
device is on a bus.
Thanks to Martin Schlemmer <azarah@nosferatu.za.org> for pointing this out.
|
|
|
|
Here is a small fix for udev-test.pl, to print the METHOD also
for the "whitespace config" tests.
TEST: Handle comment lines in config file (and replace kernel name)
method '' for 'class/tty/ttyUSB0' expecting node 'visor'
add: ok remove: ok
|
|
|
|
|
|
o change the parsing to get a key from the rule and sort it
into our list of known keys instead of expecting a special order
o the key to match a sysfs file must be prependend by 'SYSFS_' now
to match with the new parsing.
(The config must be changed, but it's a bit more descriptive too.)
o put names of fields in define's, like the name of the methods
o update all tests and the man page
|
|
Try this patch if you like, to get special parts of the callout output.
This beast works now:
CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n node link1 link2", ID="node *", NAME="%1c", SYMLINK="%2c %3c"
The callout returned string is separated by spaces and is
addressed by the "len" value of the 'c' format char.
Since we support symlinks, this my be useful for other uses of callout too.
introduce 'len number' for format chars
the first use is 'c'-the callout return to select a part of the output string like:
CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n node link1 link2", ID="node *", NAME="%1c", SYMLINK="%2c %3c"
(note: first part is requested by len=1, len=0 will return the whole string)
add a test to udev-test.pl
|
|
|
|
Here is a patch to allow the creation of multiple symlinks.
The names must be separated by a space character.
REPLACE, KERNEL="ttyUSB0", NAME="visor", SYMLINK="first-%n second-%n third-%n"
results in:
Dec 9 05:28:51 pim udev[12019]: create_node: mknod(udev-root/visor, 020666, 188, 0)
Dec 9 05:28:51 pim udev[12019]: create_node: symlink 'udev-root/first-0' to node 'visor' requested
Dec 9 05:28:51 pim udev[12019]: create_node: symlink(./visor, udev-root/first-0)
Dec 9 05:28:51 pim udev[12019]: create_node: symlink 'udev-root/second-0' to node 'visor' requested
Dec 9 05:28:51 pim udev[12019]: create_node: symlink(./visor, udev-root/second-0)
Dec 9 05:28:51 pim udev[12019]: create_node: symlink 'udev-root/third-0' to node 'visor' requested
Dec 9 05:28:51 pim udev[12019]: create_node: symlink(./visor, udev-root/third-0)
|
|
> > here is a experimental symlink creation patch - for discussion,
> > in which direction we should go.
> > It is possible now to define SYMLINK= after the NAME= in udev.rules.
> > The link is relative to the node, but the path is not optimized now
> > if the node and the link are in the same nested directory.
> > Only one link is supported, cause i need to sleep now :)
> >
> > 06-simple-symlink-creation.diff
> > simple symlink creation
> > reorganized udev-remove to have access to the symlink field
> > subdir creation/removal are functions now
> > udev-test.pl tests for link creation/removal
Here is a new version with relative link target path optimization
an better tests in udev-test.pl:
LABEL, BUS="scsi", vendor="IBM-ESXS", NAME="1/2/a/b/node", SYMLINK="1/2/c/d/symlink"
Dec 7 06:48:34 pim udev[13789]: create_node: symlink 'udev-root/1/2/c/d/symlink' to node '1/2/a/b/node' requested
Dec 7 06:48:34 pim udev[13789]: create_path: created 'udev-root/1/2/c'
Dec 7 06:48:34 pim udev[13789]: create_path: created 'udev-root/1/2/c/d'
Dec 7 06:48:34 pim udev[13789]: create_node: symlink(../../a/b/node, udev-root/1/2/c/d/symlink)
|
|
switch LABEL search to pattern match
add a test for pattern match in LABEL
remove useless rule from udev.rules
|
|
|
|
As promised yesterday, here is a patch to implement a more advanced
pattern matching instead of the simple '*'.
We can remove the "tty"="tty" line from udev.rules now and
replace "tty*" by "tty[0-9]*" to catch only the vc's.
implement pattern matching in namedev
'*' - to match zero or more chars
'?' - to match exactly one char
'[]' - character classes with ranges '[0-9]'and negation [!A]
|
|
|
|
catch device name by wildcard to support a whole class of devices
by just one config line like:
REPLACE, KERNEL="tty*", NAME="vc/%n"
|
|
|
|
|
