| Age | Commit message (Collapse) | Author |
|---|
|
There are many cgroups-related changes (thanks, @htejun!)
This commit will simplify testing a bit.
Use:
make run UNIFIED_CGROUP_HIERARCHY=yes to enable cgroup-v2
make run UNIFIED_CGROUP_HIERARCHY=no to enable cgroup-v1
|
|
Write comments about "too many search domains" and "Total length of all search
domains is too long" just once. Also put it on a separate line, as
resolv.conf(5) only specifies comments in a line by themselves.
This is ugly to do if write_resolv_conf_search() gets called once for every
search domain. So change it to receive the complete OrderedSet instead and do
the iteration by itself.
Add test cases to networkd-test.py.
https://launchpad.net/bugs/1588229
|
|
Due to the substantial interface changes in cgroup unified hierarchy, new IO
settings are introduced. Currently, IO settings apply only to unified
hierarchy and BlockIO to legacy. While the transition is necessary, it's
painful for users to have to provide configs for both. This patch implements
translation from one config set to another for configs which make sense.
* The translation takes place during application of the configs. Users won't
see IO or BlockIO settings appearing without being explicitly created.
* The translation takes place only if there is no config for the matching
cgroup hierarchy type at all.
While this doesn't provide comprehensive compatibility, it should considerably
ease transition to the new IO settings which are a superset of BlockIO
settings.
v2:
- Update test-cgroup-mask.c so that it accounts for the fact that
CGROUP_MASK_IO and CGROUP_MASK_BLKIO move together. Also, test/parent.slice
now sets IOWeight instead of BlockIOWeight.
|
|
In this test /etc/fstab is replaced by -.mount unit. This causes
systemd-remount-fs.service to not remount / rw, which in turn causes various
failures becuase /var is not writable. In particular
systemd-tmpfiles-setup.service reports many failures. This is something
to possibly fix on its own (see https://github.com/systemd/systemd/issues/791);
in the meanwhile let's fix this test so that it doesn't fail, since the
point of the test is to check aliases on mount units, and not a ro root.
|
|
systemd-udev generated an insane amount of log output at debug level.
It would break TEST-02-CRYPTSETUP by filling the overflowing the disk
(which seems to be a bug in itself!).
|
|
|
|
It has been replaced by --state=failed.
|
|
WARNING: Image format was not specified for
'/var/tmp/systemd-test.tGi3od/rootdisk.img' and probing guessed raw.
Automatically detecting the format is dangerous for raw images, write
operations on block 0 will be restricted. Specify the 'raw' format
explicitly to remove the restrictions.
Also use unsafe caching mode, we don't care about data integrity here.
|
|
|
|
|
|
|
|
|
|
~ suffix works fine, but looks to much like it the file is supposed to be
automatically cleaned up. For new versions of configuration files installers
might want to using something that looks more permanent like foobar.new.
So let's add treat ".old" and ".new" as special.
Update test to match.
|
|
Just for convenience.
|
|
Document the necessary dependencies and nspawn/lxd options to run
test/networkd-test.py.
|
|
Test for #2691.
|
|
(#3023)
Fixes:
$ cd test/TEST-07-ISSUE-1981/
$ sudo make clean setup run
...
timeout: failed to run command ‘systemd-nspawn’: No such file or directory
...
TEST RUN: https://github.com/systemd/systemd/issues/1981 [FAILED]
Makefile:10: recipe for target 'run' failed
make: *** [run] Error 1
|
|
Add two more tests:
- Add a single tag, match on it, don't match on another.
- Add 10.000 tags to a device, ensure that udev survives this.
(Reproduces crash fixed by commit 1d88a271a)
|
|
We expect test-udev to succeed. Verify that its exit code is zero, particularly
to spot crashes (e. g. a segfault would be error code 139).
|
|
* This reverts commit 646048b40a7b62c4e9bc59024ef6133613cda01b.
Let's test really big numbers again
* Don't be so brutal: use rmdir instead of rm -rf
As suggested https://github.com/systemd/systemd/pull/2966#issuecomment-205751680
|
|
Fixes: #457
|
|
* tests-functions: improve FSTYPE-support
make clean setup FSTYPE=reiserfs is working fine now :)
* basic: fallback to fstatat if entry->d_type is DT_UNKNOWN
Fixes localectl on reiserfs:
-bash-4.3# mkdir -p /usr/lib/locale
-bash-4.3# stat -f /usr/lib/locale/
File: "/usr/lib/locale/"
ID: bdb0322715b5366e Namelen: 255 Type: reiserfs
Block size: 4096
Blocks: Total: 99835 Free: 60262 Available: 60262
Inodes: Total: 0 Free: 0
-bash-4.3# mkdir /usr/lib/locale/HeyHo
-bash-4.3# localectl list-locales --no-pager
-bash-4.3# mount -t tmpfs tmpfs /usr/lib/locale
-bash-4.3# mkdir /usr/lib/locale/HeyHo
-bash-4.3# localectl list-locales --no-pager
HeyHo
|
|
core: set NoNewPrivileges for seccomp if we don't have CAP_SYS_ADMIN
|
|
selinux: use *_raw API from libselinux
|
|
Very handy for early-boot debugging
See https://github.com/systemd/systemd/pull/2781#discussion_r54782628
|
|
|
|
|
|
The manpage of seccomp specify that using seccomp with
SECCOMP_SET_MODE_FILTER will return EACCES if the caller do not have
CAP_SYS_ADMIN set, or if the no_new_privileges bit is not set. Hence,
without NoNewPrivilege set, it is impossible to use a SystemCall*
directive with a User directive set in system mode.
Now, NoNewPrivileges is set if we are in user mode, or if we are in
system mode and we don't have CAP_SYS_ADMIN, and SystemCall*
directives are used.
|
|
It's useful when trying to see what the tests are doing.
I hardcoded '-efile' as the option to strace, but in the future
it might be useful to make this configurable.
|
|
+ perl -e 'exit(!(qq{0} eq qq{\x25U}))'
exec-spec-interpolation.service: Main process exited, code=exited, status=1/FAILURE
exec-spec-interpolation.service: Unit entered failed state.
exec-spec-interpolation.service: Failed with result 'exit-code'.
PID: 11270
Start Timestamp: Wed 2016-02-17 22:21:31 UTC
Exit Timestamp: Wed 2016-02-17 22:21:31 UTC
Exit Code: exited
Exit Status: 1
Assertion 'service->main_exec_status.status == status_expected' failed at src/test/test-execute.c:65, function check(). Aborting.
|
|
|
|
test: remove exit 0 at the end
|
|
There are some limits on XFS:
major_max=511
minor_max=262143
see https://github.com/torvalds/linux/blob/master/fs/xfs/xfs_iops.c
if (S_ISCHR(mode) || S_ISBLK(mode)) {
if (unlikely(!sysv_valid_dev(rdev) || MAJOR(rdev) & ~0x1ff))
return -EINVAL;
|
|
We don't need that at the end, as it will always exit with 0 if
everything is okey.
|
|
|
|
* pam_unix depends on unix_chkpwd
* selinux=1 -> pam_unix runs unix_chkpwd for root too
https://git.fedorahosted.org/cgit/linux-pam.git/tree/modules/pam_unix/passverify.c?id=e89d4c97385ff8180e6e81e84c5aa745daf28a79#n202
|
|
|
|
If there is a lot of initscripts and dependencies between them we might
end generating After= (and similar) lines which are longer then LINE_MAX
and thus rejected by parser in systemd.
Fixes #2099
|
|
We need a beautiful stacktraces sometimes
For example https://github.com/systemd/systemd/pull/2328
|
|
We have
JOB UNIT TYPE STATE
1 testsuite.target start waiting
81 end.service start waiting
187 sleep.service start waiting
136 hello.service start waiting
82 testsuite.service start running
135 hello-after-sleep.target start waiting
sometimes
|
|
we don't run nspawn in TEST-02-CRYPTSETUP
|
|
|
|
systemd-fsck depends on /sbin/fsck*
|
|
* Use $ROOTLIBDIR/systemd always
* Don't pass $ROOTLIBDIR/systemd as the first argument:
$ cat /proc/1/cmdline
/lib/systemd/systemd/lib/systemd/systemd...
|
|
I used it for d9814c7 and bffd87b
|
|
I used it for d9814c76ec35e53a6b6448c0
Very handy:)
|
|
This is a followup for 1d40ddb
|
|
The ambient capability tests are only run if the kernel has support for
ambient capabilities.
|
|
See https://github.com/systemd/systemd/issues/2236
|
|
Expose soft limits on the bus
|
