summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2016-12-02Merge pull request #4228 from dm0-/coreos-1554Zbigniew Jędrzejewski-Szmek
networkd: support marking links unmanaged
2016-12-01python: use raw strings for regexp patternsZbigniew Jędrzejewski-Szmek
Behaviour is not changed, because "unknown" escapes like \s or \d were not substituted, but it's much nicer to use raw strings to avoid ambiguity.
2016-12-01python: adjust imports, indentation, unused variables following pylint adviceZbigniew Jędrzejewski-Szmek
2016-12-01networkd: support marking links unmanagedDavid Michael
2016-12-01networkd-test: define a utility class to simplify testsDavid Michael
2016-11-30test: retry checking for transient hostname in hostnamectl (#4769)Martin Pitt
Sometimes setting the transient hostname does not happen synchronously, so retry up to five times. It is not yet clear whether this is legitimate behaviour or an underlying bug, but this will at least show whether the wrong transient hostname is just a race condition or permanently wrong. Fixes #4753
2016-11-28Use python3 explicitly in all python scriptsFelipe Sateler
2016-11-28test: make transient hostname tests fail verbosely (#4754)Martin Pitt
This test fails sometimes but it is hard to reproduce, so we need more information what happens. Set journal log level to "debug" for the entirety of networkd-test.py, and show networkd's and hostnamed's journals and the DHCP server log on failure of the two test_transient_hostname* tests. Also sync the journal before querying it to get more precise output. This should help with tracking down issue #4753.
2016-11-24tests: add hwdb parsing testMartin Pitt
This calls the built "systemd-hwdb update" on the source tree's hwdb/ in a temporary directory and verifies that there are no error messages.
2016-11-23networkd: allow networkd to set the timezone in timedatedMartin Pitt
systemd-networkd runs as user "systemd-network" and thus is not privileged to set the timezone acquired from DHCP: systemd-networkd[4167]: test_eth42: Could not set timezone: Interactive authentication required. Similarly to commit e8c0de912, add a polkit rule to grant org.freedesktop.timedate1.set-timezone to the "systemd-network" system user. Move the polkit rules from src/hostname/ to src/network/ to avoid too many small distributed policy snippets (there might be more in the future), as it's easier to specify the privileges for a particular subject in this case. Add NetworkdClientTest.test_dhcp_timezone() test case to verify this (for all people except those in Pacific/Honolulu, there the test doesn't prove anything -- sorry ☺ ).
2016-11-21Merge pull request #4701 from martinpitt/networkd-polkitLennart Poettering
hostnamed: allow networkd to set the transient hostname
2016-11-21tests: check transient hostname with and without static hostnameMartin Pitt
We expect a static hostname to win over a transient one, so test both cases.
2016-11-20Merge pull request #4691 from keszybz/test-suite-fixesEvgeny Vereshchagin
Test suite fixes
2016-11-20hostnamed: allow networkd to set the transient hostnameMartin Pitt
systemd-networkd runs as user "systemd-network" and thus is not privileged to set the transient hostname: systemd-networkd[516]: ens3: Could not set hostname: Interactive authentication required. Standard polkit *.policy files do not have a syntax for granting privileges to a user, so ship a pklocalauthority (for polkit < 106) and a JavaScript rules file (for polkit >= 106) that grants the "systemd-network" system user that privilege. Add DnsmasqClientTest.test_transient_hostname() test to networkd-test.py to cover this. Make do_test() a bit more flexible by interpreting "coldplug==None" as "test sets up the interface by itself". Change DnsmasqClientTest to set up test_eth42 with a fixed MAC address so that we can configure dnsmasq to send a special host name for that. Fixes #4646
2016-11-20test: clean up "dummy0" interface after each test case in networkd-test.pyMartin Pitt
2016-11-19test-functions: also add qemu define for ppc64Zbigniew Jędrzejewski-Szmek
2016-11-18Merge pull request #4395 from s-urbaniak/rw-supportLennart Poettering
nspawn: R/W support for /sysfs, /proc, and /proc/sys/net
2016-11-18tests/TEST-13-NSPAWN-SMOKE: add SYSTEMD_NSPAWN_API_VFS_WRITABLEEvgeny Vereshchagin
https://github.com/systemd/systemd/pull/4395
2016-11-15Merge pull request #4658 from endocode/djalal/sandbox-various-fixes-v1Djalal Harouni
core: improve the logic that implies no new privileges and documentation fixes
2016-11-15tests: add UNIFIED_CGROUP_HIERARCHY=[default|hybrid] (#4675)Evgeny Vereshchagin
This will simplify testing a bit. Mainly for https://github.com/systemd/systemd/pull/4670
2016-11-15test: add tests for RestrictNamespaces=Djalal Harouni
2016-11-11tests: fix kernel/initrd searching (Arch)Evgeny Vereshchagin
We can run sudo make run instead of the sudo make run KERNEL_BIN=/boot/vmlinuz-linux INITRD=/boot/initramfs-linux.img See https://github.com/systemd/systemd/issues/4607
2016-11-07tests: use less aggressive systemctl --wait timeout in TEST-03-JOBS (#4606)Martin Pitt
If the "systemctl start" happens at an "unlucky" time such as 1000.9 seconds and then e. g. runs for 2.6 s (sleep 2 plus the overhead of starting the unit and waiting for it) the END_SEC would be 1003.5s which would round to 1004, making the difference 4. On busier testbeds the overhead apparently can take a bit more than 0.5s. The main point is really that it doesn't wait that much longer, so "-le 4" seems perfectly fine. We allow up to 1.5s in the subsequent "wait5fail" test below too. Fixes #4582
2016-11-03test: test DynamicUser= with SupplementaryGroups=Djalal Harouni
2016-11-03test: test DynamicUser= with a fixed userDjalal Harouni
2016-11-01tests: add test that journald keeps fds over termination by signalEvgeny Vereshchagin
This test fails before previous commit, and passes with it.
2016-10-24test: lets add more tests to cover SupplementaryGroups= cases.Djalal Harouni
2016-10-23Merge pull request #4372 from evverx/fix-synced-cgroup-hierarchy-permsZbigniew Jędrzejewski-Szmek
2016-10-23tests/TEST-13-NSPAWN-SMOKE: remove an expected failure checkEvgeny Vereshchagin
https://github.com/systemd/systemd/issues/4352 has been fixed So, we don't need this workaround anymore
2016-10-23test: add more tests for SupplementaryGroups=Djalal Harouni
2016-10-23test: Add simple test for supplementary groupsDjalal Harouni
2016-10-17tests: add smoke test for systemd-nspawnEvgeny Vereshchagin
Basically, this test runs: ``` systemd-nspawn --register=no -D "$_root" -b systemd-nspawn --register=no -D "$_root" --private-network -b systemd-nspawn --register=no -D "$_root" -U -b systemd-nspawn --register=no -D "$_root" --private-network -U -b ``` and exports the `UNIFIED_CGROUP_HIERARCHY=[yes|no]`, `SYSTEMD_NSPAWN_USE_CGNS=[yes|no]` Inspired by * systemd#3589 (comment) * systemd#4372 (comment) * systemd#4223 (comment) * systemd#1555 and so on :-)
2016-10-12test: add test to make sure that ProtectKernelModules=yes disconnect mount ↵Djalal Harouni
propagation
2016-10-12test: add test to make sure that CAP_SYS_RAWIO was removed on PrivateDevices=yesDjalal Harouni
2016-10-12test: add capability tests for ProtectKernelModules=Djalal Harouni
This just adds capabilities test.
2016-10-01systemctl: Add --wait option to wait until started units terminate againMartin Pitt
Fixes #3830
2016-09-30resolved: don't query domain-limited DNS servers for other domains (#3621)Martin Pitt
DNS servers which have route-only domains should only be used for the specified domains. Routing queries about other domains there is a privacy violation, prone to fail (as that DNS server was not meant to be used for other domains), and puts unnecessary load onto that server. Introduce a new helper function dns_server_limited_domains() that checks if the DNS server should only be used for some selected domains, i. e. has some route-only domains without "~.". Use that when determining whether to query it in the scope, and when writing resolv.conf. Extend the test_route_only_dns() case to ensure that the DNS server limited to ~company does not appear in resolv.conf. Add test_route_only_dns_all_domains() to ensure that a server that also has ~. does appear in resolv.conf as global name server. These reproduce #3420. Add a new test_resolved_domain_restricted_dns() test case that verifies that domain-limited DNS servers are only being used for those domains. This reproduces #3421. Clarify what a "routing domain" is in the manpage. Fixes #3420 Fixes #3421
2016-09-27test: make sure that {readonly|inaccessible|readwrite}paths disconnect mount ↵Djalal Harouni
propagation Better safe.
2016-09-27test: add tests for simple ReadOnlyPaths= caseDjalal Harouni
2016-09-25test: add CAP_MKNOD tests for PrivateDevices=Djalal Harouni
2016-09-16networkd: support drop-in directories for .network filesJean-Sébastien Bour
Fixes #3655. [zj: Fix the tests.]
2016-09-16networkd-test: add a helper function to always clean up temporary config filesZbigniew Jędrzejewski-Szmek
2016-08-26tests: mount proc before `exec valgrind` (#4044)Evgeny Vereshchagin
Fixes: $ sudo make run QEMU_BIN=/usr/bin/qemu-system-x86_64 KERNEL_APPEND=systemd.unit=multi-user.target SKIP_INITRD=yes TEST RUN: Basic systemd setup + /usr/bin/qemu-system-x86_64 -smp 1 -net none -m 512M -nographic -kernel /boot/vmlinuz-4.6.7-200.fc23.x86_64 -drive format=raw,cache=unsafe,file=/var/tmp/systemd-test.izx99J/rootdisk.img -append 'root=/dev/sda1 raid=noautodetect loglevel=2 init=/usr/lib/systemd/systemd-under-valgrind rw console=ttyS0 selinux=0 systemd.unified_cgroup_hierarchy=no systemd.unit=multi-user.target ' valgrind: warning (non-fatal): readlink("/proc/self/exe") failed. valgrind: continuing, however --trace-children=yes will not work. --1:0: aspacem Valgrind: FATAL: can't open /proc/self/maps --1:0: aspacem Exiting now. [ 3.152367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 [ 3.152367] [ 3.152367] CPU: 0 PID: 1 Comm: memcheck-amd64- Not tainted 4.6.7-200.fc23.x86_64 #1 [ 3.152367] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.2-20150714_191134- 04/01/2014 [ 3.152367] 0000000000000086 0000000047ca1666 ffff88001ea43e00 ffffffff813d954e [ 3.152367] ffffffff81a205a0 ffff88001ea43e98 ffff88001ea43e88 ffffffff811b5557 [ 3.152367] ffffffff00000010 ffff88001ea43e98 ffff88001ea43e30 0000000047ca1666 [ 3.152367] Call Trace: [ 3.152367] [<ffffffff813d954e>] dump_stack+0x63/0x85 [ 3.152367] [<ffffffff811b5557>] panic+0xde/0x220 [ 3.152367] [<ffffffff810ab9c3>] do_exit+0xb43/0xb50 [ 3.152367] [<ffffffff810aba57>] do_group_exit+0x47/0xb0 [ 3.152367] [<ffffffff810abad4>] SyS_exit_group+0x14/0x20 [ 3.152367] [<ffffffff817dae72>] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 3.152367] Kernel Offset: disabled [ 3.152367] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100 [ 3.152367] QEMU: Terminated
2016-08-19tests: let's stick to 8ch indenting, in perl code tooLennart Poettering
2016-08-02test: fix test-execute personality tests on ppc64 and aarch64 (#3825)Jan Synacek
2016-07-31Merge pull request 3821 from davide125/fix-testsZbigniew Jędrzejewski-Szmek
2016-07-29tests: skip udev-test if running inside a chrootDavide Cavalca
2016-07-21bootctl: Always use upper case for "/EFI/BOOT" and "/EFI/BOOT/BOOT*.EFI".Alexander Kurtz
If the ESP is not mounted with "iocharset=ascii", but with "iocharset=utf8" (which is for example the default in Debian), the file system becomes case sensitive. This means that a file created as "FooBarBaz" cannot be accessed as "foobarbaz" since those are then considered different files. Moreover, a file created as "FooBar" can then also not be accessed as "foobar", and it also prevents such a file from being created, as both would use the same 8.3 short name "FOOBAR". Even though the UEFI specification [0] does give the canonical spelling for the files mentioned above, not all implementations completely conform to that, so it's possible that those files would already exist, but with a different spelling, causing subtle bugs when scanning or modifying the ESP. While the proper fix would of course be that everybody conformed to the standard, we can work around this problem by just referencing the files by their 8.3 short names, i.e. using upper case. Fixes: #3740 [0] <http://www.uefi.org/specifications>, version 2.6, section 3.5.1.1
2016-07-03tests: Install missing libraries for things installed in /usr tooFelipe Sateler
2016-07-03tests: follow RUNPATH when installing missing librariesFelipe Sateler
Fixes #3630
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-15 15:25:20 +0000