summaryrefslogtreecommitdiff
path: root/tmpfiles.d/systemd.conf
AgeCommit message (Collapse)Author
2014-06-11tmpfiles: don't allow read access to journal files to users not in ↵Lennart Poettering
systemd-journal Also, don't apply access mode recursively to /var/log/journal/*/, since that might be quite large, and should be correct anyway.
2014-06-11tmpfiles: don't apply sgid and executable bit to journal files, only the ↵Lennart Poettering
directories they are contained in
2014-06-11tmpfiles: always recreate the most basic directory structure in /varLennart Poettering
Let's allow booting up with /var empty. Only create the most basic directories to get to a working directory structure and symlink set in /var.
2014-06-10tmpfiles: get rid of "m" lines, make them redundant by "z"Lennart Poettering
"m" so far has been a non-globbing version of "z". Since this makes it quite redundant, let's get rid of it. Remove "m" from the man pages, beef up "z" docs instead, and make "m" nothing more than a compatibility alias for "z".
2014-06-03networkd: split runtime config dir from state dirTom Gundersen
Configuration will be in root:root /run/systemd/network and state will be in systemd-network:systemd-network /run/systemd/netif This matches what we do for logind's seat/session state.
2014-06-02tmpfiles: systemd.conf - fix ownership of network directoriesTom Gundersen
2014-05-22timesyncd: order after tmpfiles to get a working network monitorKay Sievers
2014-05-16network: always create /run/systemd/network/linksLennart Poettering
This ways the networkd client library should work even if networkd is not running. http://lists.freedesktop.org/archives/systemd-devel/2014-May/019242.html
2014-04-17tmpfiles: fix permissions on new journal filesGreg KH
When starting up journald on a new system, set the proper permissions on the system.journal files, not only on the journal directory.
2013-12-24tmpfiles: introduce the concept of unsafe operationsZbigniew Jędrzejewski-Szmek
Various operations done by systemd-tmpfiles may only be safely done at boot (e.g. removal of X lockfiles in /tmp, creation of /run/nologin). Other operations may be done at any point in time (e.g. setting the ownership on /{run,var}/log/journal). This distinction is largely orthogonal to the type of operation. A new switch --unsafe is added, and operations which should only be executed during bootup are marked with an exclamation mark in the configuration files. systemd-tmpfiles.service is modified to use this switch, and guards are added so it is hard to re-start it by mistake. If we install a new version of systemd, we actually want to enforce some changes to tmpfiles configuration immediately. This should now be possible to do safely, so distribution packages can be modified to execute the "safe" subset at package installation time. /run/nologin creation is split out into a separate service, to make it easy to override. https://bugzilla.redhat.com/show_bug.cgi?id=1043212 https://bugzilla.redhat.com/show_bug.cgi?id=1045849
2013-10-02tmpfiles.d: include setgid perms for /run/log/journalDave Reisner
4608af4333d0f7f5 set permissions for journal storage on persistent disk but not the volatile storage. ref: https://bugs.archlinux.org/task/37170
2013-09-27Add a bit more explicit message, to help confused usersMichael Scherer
Seeing http://www.happyassassin.net/2013/09/27/further-sysadmin-adventures-wheres-my-freeipa-badge/ it seems that the default message is a bit confusing for people who never encountered it before, so adding a link to the manpage could help them.
2013-09-17journald: avoid NSS in journaldLennart Poettering
In order to avoid a deadlock between journald looking up the "systemd-journal" group name, and nscd (or anyother NSS backing daemon) logging something back to the journal avoid all NSS in journald the same way as we avoid it from PID 1. With this change we rely on the kernel file system logic to adjust the group of created journal files via the SETGID bit on the journal directory. To ensure that it is always set, even after the user created it with a simply "mkdir" on the shell we fix it up via tmpfiles on boot.
2013-07-02machined: split out machine registration stuff from logindLennart Poettering
Embedded folks don't need the machine registration stuff, hence it's nice to make this optional. Also, I'd expect that machinectl will grow additional commands quickly, for example to join existing containers and suchlike, hence it's better keeping that separate from loginctl.
2013-01-19tmpfiles: do not make /run/nologin executableMichał Bartoszkiewicz
2013-01-07tmpfiles: move legacy flag-files handling to legacy.confTom Gundersen
2012-06-25tmpfiles: write /run/nologin during early boot to disallow too early user loginsLennart Poettering
systemd-user-sessoins.service will later on remove the flag file, thus permitting user logins when the time has come.
2012-06-20tmpfiles: exclude the first level directories in /run/user from automatic ↵Lennart Poettering
clean up It's logind's job to maintain those user dirs, so avoid automatic clean up for them. However, we do cover everything within them.
2012-04-12relicense to LGPLv2.1 (with exceptions)Lennart Poettering
We finally got the OK from all contributors with non-trivial commits to relicense systemd from GPL2+ to LGPL2.1+. Some udev bits continue to be GPL2+ for now, but we are looking into relicensing them too, to allow free copy/paste of all code within systemd. The bits that used to be MIT continue to be MIT. The big benefit of the relicensing is that closed source code may now link against libsystemd-login.so and friends.
2012-04-11shutdownd: rework interface, allow subscribing to scheduled shutdownsLennart Poettering
This extends the shutdownd interface to expose schedule shutdown information in /run/systemd/shutdown/schedule. This also cleans up the shutdownd protocol and documents it in a header file sd-shutdown.h. This is supposed to be used by client code that wants to control and monitor scheduled shutdown.
2011-08-24tmpfiles: Move /tmp and /var/tmp to a separate tmpfiles.d file to ease ↵Josh Triplett
overrides via /etc Many people prefer to avoid clearing /tmp and /var/tmp, and distributions often have explicit settings for how often to clear them if at all. Overriding those with systemd currently requires overriding all of /usr/lib/tmpfiles.d/systemd.conf via /etc/tmpfiles.d/systemd.conf, copying across all the other entries, and updating that override when systemd.conf changes. Move the /tmp and /var/tmp entries from systemd.conf to a separate tmp.conf, making them easier to override without affecting the rest of systemd.conf.
2011-07-22sd-login: beef up login api, to add monitoring and enumeratingLennart Poettering
2011-04-10path: optionally, create watched directories in .path unitsLennart Poettering
2011-04-03move /var/lock to HAVE_SYSV_COMPATKay Sievers
2011-04-02tmpfiles: split off rules for legacy systems into legacy.confLennart Poettering
2011-04-01tmpfiles: enforce new /var/lock semanticsLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2011-March/001823.html
2011-03-29tmpfiles fix /run/lock permissionsKay Sievers
<mbiebl> kay: just wondering: d /run/lock 0755 root lock - <mbiebl> shouldn't that rather be 0775? <mbiebl> otherwise it doesn't make sense
2011-03-28use /run instead of /dev/.runKay Sievers
Instead of the /dev/.run trick we have currently implemented, we decided to move the early-boot runtime dir to /run. An existing /var/run directory is bind-mounted to /run. If /var/run is already a symlink, no action is taken. An existing /var/lock directory is bind-mounted to /run/lock. If /var/lock is already a symlink, no action is taken. To implement the directory vs. symlink logic, we have a: ConditionPathIsDirectory= now, which is used in the mount units. Skipped mount unit in case of symlink: $ systemctl status var-run.mount var-run.mount - Runtime Directory Loaded: loaded (/lib/systemd/system/var-run.mount) Active: inactive (dead) start condition failed at Fri, 25 Mar 2011 04:51:41 +0100; 6min ago Where: /var/run What: /run CGroup: name=systemd:/system/var-run.mount The systemd rpm needs to make sure to add something like: %pre mkdir -p -m0755 /run >/dev/null 2>&1 || : or it needs to be added to filesystem.rpm. Udev -git already uses /run if that exists, and is writable at bootup. Otherwise it falls back to the current /dev/.udev. Dracut and plymouth need to be adopted to switch from /dev/.run to run too. Cheers, Kay
2010-11-10tmpfiles: include reference to man page in tmpfiles filesLennart Poettering
2010-10-25tmpfiles: Don't clean /var/lock/subsys; it is not aged contentBill Nottingham
It will get 'cleaned' on boot due to being tmpfs anyway.
2010-10-25tmpfiles: Make wtmp match utmp perms, and add btmp.Bill Nottingham
2010-10-19tmpfiles: remove forcefsck/fastboot flag files after bootLennart Poettering
2010-10-18tmpfiles: integrate kay's directory cleanup code and otherwise beef up ↵Lennart Poettering
tmpfiles quite a bit
2010-09-28tmpfiles: install default tmpfiles configurationLennart Poettering