| Age | Commit message (Collapse) | Author |
|---|
|
Hi,
The following patch makes udev/udevstart be a common binary. First,
doing this grows udev by a total of 1.8kB (ppc32, stripped) whereas
udevstart by itself is 6.4kB. I know you mentioned being able to
replace udevstart with a script, but at 1.8kB I don't think it'll be
easy to beat this with size there. Next, the following are by-eye
timings of before, after, and with devfs on a slow, but still usable
embedded platform (config stripped down to more-or-less bare for
ramdisk):
-- Embedded Planet RPX LITE, 64Mhz MPC 823e --
devfs : 15.333s, 15.253s, 14.988s (15.191s avg)
udev-pristine : 18.675s, 18.079s, 18.418s (18.390s avg)
udev-multi : 14.587s, 14.747s, 14.868s (14.734s avg)
The patch ends up being rather large to add this, as in doing so I ended
up making all refs (that I hit..) to devpath/subsystem be marked as
'const'.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
|
|
Fix the devpath string for unhandled netdev's.
|
|
Based on a patch from Olaf Hering we remove the node now only if the
requested dev_t is different from the already existing node, so any
run of udevstart should preserve the inode number of the node file.
syslog while the right node is already there:
creating device node '/udev/hda'
make_node: preserve file '/udev/hda', cause it has correct dev_t
make_node: chmod(/udev/hda, 060600)
syslog for wrong file already there:
creating device node '/udev/hda'
make_node: already present file '/udev/hda' unlinked
make_node: chmod(/udev/hda, 060600)
syslog for directory with same name already there:
creating device node '/udev/hda'
make_node: unlink(/udev/hda) failed with error '21'
|
|
|
|
Here we change the DEVPATH for netdev's in the environment of the dev.d/
scripts to the name the device is renamed to. The original name doesn't
exist in the kernel after rename.
|
|
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
|
|
On Thu, Mar 25, 2004 at 02:52:13AM +0100, Kay Sievers wrote:
> Please have look if it still works for you, I only did a very quick
> test.
Here is a unified version, with all the functions moved to udev_lib.c.
We have a generic function now, to call a given fnct(char *) for every
file ending with a specific suffix, sorted in lexical order. We use it
to execute the dev.d/ files and read our rules.d/ files. The binary
should be a bit smaller now.
I've also changed it, to not do the dev.d/ exec for net devices.
|
|
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
|
|
|
|
there.
|
|
|
|
Here we replace the various fgets() with a mmap() call for the config
file reading, due to the reported performance problems with klibc.
Thanks to Patrick's testing, it makes a very small, close to nothing
speed gain for libc users, but a 6 times speed increase for klibc users
with a 1000 line config file.
I've created a udev_lib.[hc] for this and also moved all the generic
stuff from udev.h in there and uninlined the functions.
|
|
Hey, I wrote the strn*() macros just 10 days ago and yesterday this trap
caught me with the %c{x} bug.
The names are misleading cause we all expect that the from field is limited by
the size argument, but we actually limit the overall size of the destination
string to prevent a overflow.
Here we rename all strn*() macros to str*max(). That should be
more self-explanatory.
|
|
On Wed, Mar 03, 2004 at 04:56:34PM -0800, Greg KH wrote:
> On Wed, Mar 03, 2004 at 03:57:04PM -0800, Patrick Mansfield wrote:
> >
> > Here is a patch for some new tests.
>
> Applied, thanks.
Here is a small improvement, which looks much better.
Hey Pat, thanks a lot for finding the recent bug, hope this one will
not break it again :)
|
|
|
|
Here I try to cleanup our various multifield iteration over the strings.
Inspired by our nice list.h we now have a macro to iterate over the string
and process the parts of it:
It makes the code more readable and we don't change the string while we
process it like the former strsep() does.
Example:
foreach_strpart(dev->symlink, " ", pos, len) {
if (strncmp(&dev->symlink[pos], find_name, len) != 0)
continue;
...
}
For the callout part selector %c{2} we separate now not only by space but
also newline and return characters, cause some programs may give multiline
values back. A possible RESULT match must contain wildcards for these
characters.
Also a bug in the recent udevinfo symlink query feature is fixed.
|
|
While moving the local user logic in it's own function I missed to
change the "secure" string macro. We copy only the first 3 bytes
of the username. Guess why I didn't notice it :)
|
|
Fix for recent unlink patch.
|
|
Based on the patch in the Gentoo repo.
|
|
|
|
Here is for now my last patch to the string handling for a rather
theorethical case, where the node is very very very long. :)
We have accordant to strfieldcat(to, from) now a strintcat(to, i) macro,
which appends the ascii representation of a integer to a string in a
safe way.
|
|
Here we remove the useless leading "./" of the linktargets.
Thanks to Olaf Hering <olh@suse.de>, who asked why we do this :)
We have now:
/udev
|-- camera0 -> video0
|-- kamera0 -> video0
`-- video0
|
|
Based on a patch from Daniel J Walsh <dwalsh@redhat.com>
|
|
On Tue, Feb 24, 2004 at 11:50:52PM +0100, Kay Sievers wrote:
> Here is the first step towards a safer string handling.
> More will follow, but for now only the easy ones :)
>
> Thanks to all who pointed this out. strncat() isn't a nice function. We
> all should remember that the destination string is not terminated if the
> given lenght is shorter than the strlen of the source string.
>
> And shame on the various implementers of strfieldcat() I found in the
> unapplied patches on this list, it's not really better than strncpy()
> and hides the real problem.
Hmm, bk didn't checked in one file, maybe I edited it again as root.
Nevermind, here is the more complete version.
|
|
external one.
Should fix some more build bugs...
|
|
Use the new location of libsysfs header files.
|
|
|
|
Here is the first try to create all partitons of a blockdevice, since
removable media devices may need to acces the expected partition to
revalidate the media.
It uses the attribute syntax introduced with the last %s{file} patch.
I'm using this with my multi-slot-flash-card-reader:
SYSFS{model}="USB Storage-SMC ", NAME{all_partitions}="smartmedia"
SYSFS{model}="USB Storage-CFC ", NAME{all_partitions}="compactflash"
SYSFS{model}="USB Storage-MSC ", NAME{all_partitions}="memorystick"
SYSFS{model}="USB Storage-MMC ", NAME{all_partitions}="multimedia"
and I get:
tree /udev/
/udev/
|-- memorystick
|-- memorystick1
|-- memorystick10
|-- memorystick11
|-- memorystick12
|-- memorystick13
|-- memorystick14
|-- memorystick15
|-- memorystick2
|-- memorystick3
|-- memorystick4
|-- memorystick5
|-- memorystick6
|-- memorystick7
|-- memorystick8
|-- memorystick9
|-- multimedia
|-- multimedia1
|-- multimedia10
|-- multimedia11
|-- multimedia12
|-- multimedia13
|-- multimedia14
|-- multimedia15
|-- multimedia2
|-- multimedia3
|-- multimedia4
|-- multimedia5
|-- multimedia6
|-- multimedia7
|-- multimedia8
|-- multimedia9
...
If needed, we can make the number of partions to create
adjustable with the attribute?
|
|
Also fix up some other dependancy issues in the Makefile.
Thanks to Olaf Hering <olh@suse.de> for pointing them out.
|
|
|
|
On Sun, Feb 08, 2004 at 04:36:01PM +0100, Kay Sievers wrote:
> We don't handle NAME="" the right way. Thanks to Emil None <emil71se@yahoo.com>
> for pointing this out. Here is a fix for it and a trivial style cleanup.
Changed the ignore dbg() to info().
|
|
I've edited the man page today, so this is alreay included :)
Also a few more trivials:
o added the defaults to udev.conf.in
o removed class_dev from get_default_mode(), to match with Hanna's
o changed size of mode_str to MODE_SIZE
o changed a few char compares from from 0x00 to '\0'
|
|
On Thu, Jan 15, 2004 at 05:14:16AM +0100, Kay Sievers wrote:
> On Wed, Jan 14, 2004 at 01:10:43PM -0800, Greg KH wrote:
> > On Wed, Jan 14, 2004 at 02:34:26PM -0600, Clay Haapala wrote:
> > > On Wed, 14 Jan 2004, Chris Friesen spake thusly:
> > > >
> > > > Maybe for ones with a matching rule, you could print something like:
> > > >
> > > >
> > > Is the act of printing/syslogging a rule in an of itself?
> >
> > No, as currently the only way stuff ends up in the syslog is if
> > DEBUG=true is used on the build line.
> >
> > But it's sounding like we might want to change that... :)
>
> How about this in the syslog after connect/disconnect?
>
> Jan 15 05:07:45 pim udev[28007]: configured rule in '/etc/udev/udev.rules' at line 17 applied, 'video*' becomes 'video/webcam%n'
> Jan 15 05:07:45 pim udev[28007]: creating device node '/udev/video/webcam0'
> Jan 15 05:07:47 pim udev[28015]: removing device node '/udev/video/webcam0'
Here is a slightly better version. I've created a logging.h file and
moved the debug macros from udev.h in there.
If you type:
'make' - you will get a binary that prints one or two lines to syslog
if a device node is created or deleted
'make LOG=false' - you get a binary that prints asolutely nothing
'make DEBUG=true' - the same as today, it will print all debug lines
|
|
If a file that is not a symlink (node, socket, fifo, etc) already
exist where udev need to create a symlink, symlink() fails. This
patch basically test for an existing file, and unlink it.
|
|
Attached is a patch for udev-add.c to ignore empty symlink string parts.
Issue was brought up by ide-devfs.sh with only one symlink returned, while two are expected.
|
|
Ananth released sysfsutils 0.4.0 last night, I'm sure you saw the email.
Here's a patch with the latest changes from the pre-patch I already
gave you. It includes sysfs_get_device_parent(), which you said you
needed. I've run your test scripts and I've built scsi_id. Please
play around with this and check it out.
There are quite a few changes. Please do not access
structure pointers, like sysfs_device's parent, directly like
dev->parent. Please use the "get" function to retrieve. The functions
load things on demand and refresh views under the covers.
|
|
I am sending you a pre-release patch. It's everything that's in our
current CVS tree. It adds the functionality you've been looking for. Please
play with this before checking it into your tree, I'd like to know if
it's ok with you or if you find problems. I have tested this out with
test.all and the perl regression test. Let me know what you think.
Still need to do more testing for our work and add some more functions
related to the changes.
I've gone into namedev.c and udev-add.c to make the necessary changes
in line with the library. I have not gone and edited any of the "extras".
Changes:
1) Libsysfs object structures work more as handles now, their included
directories or devices are labeled private. If you need attributes
from a sysfs_class_device, call the available function and don't access
the directory directly. Same holds true for a sysfs_class_device
sysfs_device. Do not access the link directly but call the function
sysfs_get_classdev_device() instead. We only populate entries upon
request, makes things faster and uses less memory.
2) Added sysfs_get_classdev_parent() as requested.
3) Changed getpagesize to sysconf.
4) Added sysfs_refresh_attributes function for refreshing views of
attribute lists. We still need to add refresh for links and subdirs. All
udev needs to do is keep calling sysfs_get_classdev_attr() and that will
internally call the refresh routine.
|
|
Here is a patch to allow the creation of multiple symlinks.
The names must be separated by a space character.
REPLACE, KERNEL="ttyUSB0", NAME="visor", SYMLINK="first-%n second-%n third-%n"
results in:
Dec 9 05:28:51 pim udev[12019]: create_node: mknod(udev-root/visor, 020666, 188, 0)
Dec 9 05:28:51 pim udev[12019]: create_node: symlink 'udev-root/first-0' to node 'visor' requested
Dec 9 05:28:51 pim udev[12019]: create_node: symlink(./visor, udev-root/first-0)
Dec 9 05:28:51 pim udev[12019]: create_node: symlink 'udev-root/second-0' to node 'visor' requested
Dec 9 05:28:51 pim udev[12019]: create_node: symlink(./visor, udev-root/second-0)
Dec 9 05:28:51 pim udev[12019]: create_node: symlink 'udev-root/third-0' to node 'visor' requested
Dec 9 05:28:51 pim udev[12019]: create_node: symlink(./visor, udev-root/third-0)
|
|
remove "want symlinks" text from udev-add.c
mention SYMLINK in man page
man page format cleanup
man page example for SYMLINK
|
|
#ifdef crud from the main code.
|
|
Attached is a patch against udev-008 to send out a D-BUS message when a
device node is added or removed.
Using D-BUS lingo, udev acquires the org.kernel.udev service and sends
out a NodeCreated or NodeDeleted signal on the
org.kernel.udev.NodeMonitor interface. Each signal carries two
parameters: the node in question and the corresponding sysfs path.
[Note: the D-BUS concepts of service, interface, object can be a bit
confusing at first glance]
An example program listening for these messages looks like this
#!/usr/bin/python
import dbus
import gtk
def udev_signal_received(dbus_iface, member, service, object_path, message):
[filename, sysfs_path] = message.get_args_list()
if member=='NodeCreated':
print 'Node %s created for %s'%(filename, sysfs_path)
elif member=='NodeDeleted':
print 'Node %s deleted for %s'%(filename, sysfs_path)
def main():
bus = dbus.Bus(dbus.Bus.TYPE_SYSTEM)
bus.add_signal_receiver(udev_signal_received,
'org.kernel.udev.NodeMonitor', # interface
'org.kernel.udev', # service
'/org/kernel/udev/NodeMonitor') # object
gtk.mainloop()
if __name__ == '__main__':
main()
and this is the output when hot-plugging some usb-storage.
[david@laptop udev-008]$ ~/node_monitor.py
Node /udev/sda created for /block/sda
Node /udev/sda1 created for /block/sda/sda1
Node /udev/sda1 deleted for /block/sda/sda1
Node /udev/sda deleted for /block/sda
The patch requires D-BUS 0.20 or later while the python example program
requires D-BUS from CVS as I only recently applied a patch against the
python bindings.
|
|
> > here is a experimental symlink creation patch - for discussion,
> > in which direction we should go.
> > It is possible now to define SYMLINK= after the NAME= in udev.rules.
> > The link is relative to the node, but the path is not optimized now
> > if the node and the link are in the same nested directory.
> > Only one link is supported, cause i need to sleep now :)
> >
> > 06-simple-symlink-creation.diff
> > simple symlink creation
> > reorganized udev-remove to have access to the symlink field
> > subdir creation/removal are functions now
> > udev-test.pl tests for link creation/removal
Here is a new version with relative link target path optimization
an better tests in udev-test.pl:
LABEL, BUS="scsi", vendor="IBM-ESXS", NAME="1/2/a/b/node", SYMLINK="1/2/c/d/symlink"
Dec 7 06:48:34 pim udev[13789]: create_node: symlink 'udev-root/1/2/c/d/symlink' to node '1/2/a/b/node' requested
Dec 7 06:48:34 pim udev[13789]: create_path: created 'udev-root/1/2/c'
Dec 7 06:48:34 pim udev[13789]: create_path: created 'udev-root/1/2/c/d'
Dec 7 06:48:34 pim udev[13789]: create_node: symlink(../../a/b/node, udev-root/1/2/c/d/symlink)
|
|
01-overall-whitespace+debug-text-conditioning.diff
o cleanup whitespace
o clarify a few comments
o enclose all printed debug string values in ''
|
|
|
|
This only works if you are using glibc.
Patch based on patch from Marco d'Itri <md@Linux.IT>
|
|
Forgot about umask in mknod...
|
|
Will come in handy later...
|
|
|
|
support subdirectory creation/removal for NAME="/devfs/is/crazy/video0"
create parent subdirs for device node if needed
remove subdirs when last node is removed
|
|
set uid/gid of node specified in udev.permissions
only numeric id's are supported cause we can't resolve with
klibc or libc before real /etc is mounted
|
