| Age | Commit message (Collapse) | Author |
|---|
|
Here we change the DEVPATH for netdev's in the environment of the dev.d/
scripts to the name the device is renamed to. The original name doesn't
exist in the kernel after rename.
|
|
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
|
|
Hmm, Arndt Bergmann sent a patch like this one a few weeks ago and
I want to bring the question back, if we want to handle net device
naming with udev.
With this patch it is actually possible to specify something like this
in udev.rules:
KERNEL="dummy*", SYSFS{address}="00:00:00:00:00:00", SYSFS{features}="0x0", NAME="blind%n"
KERNEL="eth*", SYSFS{address}="00:0d:60:77:30:91", NAME="private"
and you will get:
[root@pim udev.kay]# cat /proc/net/dev
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 1500 30 0 0 0 0 0 0 1500 30 0 0 0 0 0 0
private: 278393 1114 0 0 0 0 0 0 153204 1468 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
blind0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
The udevinfo program is also working:
[root@pim udev.kay]# ./udevinfo -a -p /sys/class/net/private
looking at class device '/sys/class/net/private':
SYSFS{addr_len}="6"
SYSFS{address}="00:0d:60:77:30:91"
SYSFS{broadcast}="ff:ff:ff:ff:ff:ff"
SYSFS{features}="0x3a9"
SYSFS{flags}="0x1003"
SYSFS{ifindex}="2"
SYSFS{iflink}="2"
SYSFS{mtu}="1500"
SYSFS{tx_queue_len}="1000"
SYSFS{type}="1"
follow the class device's "device"
looking at the device chain at '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:01.0':
BUS="pci"
ID="0000:02:01.0"
SYSFS{class}="0x020000"
SYSFS{detach_state}="0"
SYSFS{device}="0x101e"
SYSFS{irq}="11"
SYSFS{subsystem_device}="0x0549"
SYSFS{subsystem_vendor}="0x1014"
SYSFS{vendor}="0x8086"
The matching device will be renamed to the given name. The device name
will not be put into the udev database, cause the kernel renames the
device and the sysfs name disappears.
I like it, cause it plugs in nicely. We have all the naming features
and sysfs queries and walks inside of udev. The sysfs timing races
are already solved and the management tools are working for net devices
too. nameif can only match the MAC address now. udev can match any sysfs
value of the device tree the net device is connected to.
But right, net devices do not have device nodes :)
|
|
there.
|
|
|
|
Here we replace the various fgets() with a mmap() call for the config
file reading, due to the reported performance problems with klibc.
Thanks to Patrick's testing, it makes a very small, close to nothing
speed gain for libc users, but a 6 times speed increase for klibc users
with a 1000 line config file.
I've created a udev_lib.[hc] for this and also moved all the generic
stuff from udev.h in there and uninlined the functions.
|
|
Hey, I wrote the strn*() macros just 10 days ago and yesterday this trap
caught me with the %c{x} bug.
The names are misleading cause we all expect that the from field is limited by
the size argument, but we actually limit the overall size of the destination
string to prevent a overflow.
Here we rename all strn*() macros to str*max(). That should be
more self-explanatory.
|
|
On Wed, Mar 03, 2004 at 04:56:34PM -0800, Greg KH wrote:
> On Wed, Mar 03, 2004 at 03:57:04PM -0800, Patrick Mansfield wrote:
> >
> > Here is a patch for some new tests.
>
> Applied, thanks.
Here is a small improvement, which looks much better.
Hey Pat, thanks a lot for finding the recent bug, hope this one will
not break it again :)
|
|
Here I try to cleanup our various multifield iteration over the strings.
Inspired by our nice list.h we now have a macro to iterate over the string
and process the parts of it:
It makes the code more readable and we don't change the string while we
process it like the former strsep() does.
Example:
foreach_strpart(dev->symlink, " ", pos, len) {
if (strncmp(&dev->symlink[pos], find_name, len) != 0)
continue;
...
}
For the callout part selector %c{2} we separate now not only by space but
also newline and return characters, cause some programs may give multiline
values back. A possible RESULT match must contain wildcards for these
characters.
Also a bug in the recent udevinfo symlink query feature is fixed.
|
|
no_error_on_enoent: do not exit with an error and delete all files
when a device or directory does not exist.
|
|
Here is for now my last patch to the string handling for a rather
theorethical case, where the node is very very very long. :)
We have accordant to strfieldcat(to, from) now a strintcat(to, i) macro,
which appends the ascii representation of a integer to a string in a
safe way.
|
|
On Tue, Feb 24, 2004 at 11:50:52PM +0100, Kay Sievers wrote:
> Here is the first step towards a safer string handling.
> More will follow, but for now only the easy ones :)
>
> Thanks to all who pointed this out. strncat() isn't a nice function. We
> all should remember that the destination string is not terminated if the
> given lenght is shorter than the strlen of the source string.
>
> And shame on the various implementers of strfieldcat() I found in the
> unapplied patches on this list, it's not really better than strncpy()
> and hides the real problem.
Hmm, bk didn't checked in one file, maybe I edited it again as root.
Nevermind, here is the more complete version.
|
|
Here is the first try to create all partitons of a blockdevice, since
removable media devices may need to acces the expected partition to
revalidate the media.
It uses the attribute syntax introduced with the last %s{file} patch.
I'm using this with my multi-slot-flash-card-reader:
SYSFS{model}="USB Storage-SMC ", NAME{all_partitions}="smartmedia"
SYSFS{model}="USB Storage-CFC ", NAME{all_partitions}="compactflash"
SYSFS{model}="USB Storage-MSC ", NAME{all_partitions}="memorystick"
SYSFS{model}="USB Storage-MMC ", NAME{all_partitions}="multimedia"
and I get:
tree /udev/
/udev/
|-- memorystick
|-- memorystick1
|-- memorystick10
|-- memorystick11
|-- memorystick12
|-- memorystick13
|-- memorystick14
|-- memorystick15
|-- memorystick2
|-- memorystick3
|-- memorystick4
|-- memorystick5
|-- memorystick6
|-- memorystick7
|-- memorystick8
|-- memorystick9
|-- multimedia
|-- multimedia1
|-- multimedia10
|-- multimedia11
|-- multimedia12
|-- multimedia13
|-- multimedia14
|-- multimedia15
|-- multimedia2
|-- multimedia3
|-- multimedia4
|-- multimedia5
|-- multimedia6
|-- multimedia7
|-- multimedia8
|-- multimedia9
...
If needed, we can make the number of partions to create
adjustable with the attribute?
|
|
|
|
On Thu, Jan 15, 2004 at 05:14:16AM +0100, Kay Sievers wrote:
> On Wed, Jan 14, 2004 at 01:10:43PM -0800, Greg KH wrote:
> > On Wed, Jan 14, 2004 at 02:34:26PM -0600, Clay Haapala wrote:
> > > On Wed, 14 Jan 2004, Chris Friesen spake thusly:
> > > >
> > > > Maybe for ones with a matching rule, you could print something like:
> > > >
> > > >
> > > Is the act of printing/syslogging a rule in an of itself?
> >
> > No, as currently the only way stuff ends up in the syslog is if
> > DEBUG=true is used on the build line.
> >
> > But it's sounding like we might want to change that... :)
>
> How about this in the syslog after connect/disconnect?
>
> Jan 15 05:07:45 pim udev[28007]: configured rule in '/etc/udev/udev.rules' at line 17 applied, 'video*' becomes 'video/webcam%n'
> Jan 15 05:07:45 pim udev[28007]: creating device node '/udev/video/webcam0'
> Jan 15 05:07:47 pim udev[28015]: removing device node '/udev/video/webcam0'
Here is a slightly better version. I've created a logging.h file and
moved the debug macros from udev.h in there.
If you type:
'make' - you will get a binary that prints one or two lines to syslog
if a device node is created or deleted
'make LOG=false' - you get a binary that prints asolutely nothing
'make DEBUG=true' - the same as today, it will print all debug lines
|
|
Here is a small cleanup. It replaces the malloc in udev-remove.c
with a struct, like we do in udev-add.c
|
|
I've moved the malloc out of the udevdb into udev-remove to free the
struct after use and not to allocate a different struct in the case the
device is not in the data base. I seems a bit easier to read.
|
|
Uups, we have a bug in udev-remove.c.
udev segfaults with NULL-pointer, if the device is not in the database:
./test.block: line 29: 4844 Segmentation fault $BIN block
Dec 17 22:47:42 pim udev[4882]: udev_remove_device: '/block/sdy' not found in database, falling back on default name
Dec 17 22:47:42 pim udev[4882]: udev_remove_device: name is '(null)'
|
|
Here is a patch to allow the creation of multiple symlinks.
The names must be separated by a space character.
REPLACE, KERNEL="ttyUSB0", NAME="visor", SYMLINK="first-%n second-%n third-%n"
results in:
Dec 9 05:28:51 pim udev[12019]: create_node: mknod(udev-root/visor, 020666, 188, 0)
Dec 9 05:28:51 pim udev[12019]: create_node: symlink 'udev-root/first-0' to node 'visor' requested
Dec 9 05:28:51 pim udev[12019]: create_node: symlink(./visor, udev-root/first-0)
Dec 9 05:28:51 pim udev[12019]: create_node: symlink 'udev-root/second-0' to node 'visor' requested
Dec 9 05:28:51 pim udev[12019]: create_node: symlink(./visor, udev-root/second-0)
Dec 9 05:28:51 pim udev[12019]: create_node: symlink 'udev-root/third-0' to node 'visor' requested
Dec 9 05:28:51 pim udev[12019]: create_node: symlink(./visor, udev-root/third-0)
|
|
#ifdef crud from the main code.
|
|
Attached is a patch against udev-008 to send out a D-BUS message when a
device node is added or removed.
Using D-BUS lingo, udev acquires the org.kernel.udev service and sends
out a NodeCreated or NodeDeleted signal on the
org.kernel.udev.NodeMonitor interface. Each signal carries two
parameters: the node in question and the corresponding sysfs path.
[Note: the D-BUS concepts of service, interface, object can be a bit
confusing at first glance]
An example program listening for these messages looks like this
#!/usr/bin/python
import dbus
import gtk
def udev_signal_received(dbus_iface, member, service, object_path, message):
[filename, sysfs_path] = message.get_args_list()
if member=='NodeCreated':
print 'Node %s created for %s'%(filename, sysfs_path)
elif member=='NodeDeleted':
print 'Node %s deleted for %s'%(filename, sysfs_path)
def main():
bus = dbus.Bus(dbus.Bus.TYPE_SYSTEM)
bus.add_signal_receiver(udev_signal_received,
'org.kernel.udev.NodeMonitor', # interface
'org.kernel.udev', # service
'/org/kernel/udev/NodeMonitor') # object
gtk.mainloop()
if __name__ == '__main__':
main()
and this is the output when hot-plugging some usb-storage.
[david@laptop udev-008]$ ~/node_monitor.py
Node /udev/sda created for /block/sda
Node /udev/sda1 created for /block/sda/sda1
Node /udev/sda1 deleted for /block/sda/sda1
Node /udev/sda deleted for /block/sda
The patch requires D-BUS 0.20 or later while the python example program
requires D-BUS from CVS as I only recently applied a patch against the
python bindings.
|
|
> > here is a experimental symlink creation patch - for discussion,
> > in which direction we should go.
> > It is possible now to define SYMLINK= after the NAME= in udev.rules.
> > The link is relative to the node, but the path is not optimized now
> > if the node and the link are in the same nested directory.
> > Only one link is supported, cause i need to sleep now :)
> >
> > 06-simple-symlink-creation.diff
> > simple symlink creation
> > reorganized udev-remove to have access to the symlink field
> > subdir creation/removal are functions now
> > udev-test.pl tests for link creation/removal
Here is a new version with relative link target path optimization
an better tests in udev-test.pl:
LABEL, BUS="scsi", vendor="IBM-ESXS", NAME="1/2/a/b/node", SYMLINK="1/2/c/d/symlink"
Dec 7 06:48:34 pim udev[13789]: create_node: symlink 'udev-root/1/2/c/d/symlink' to node '1/2/a/b/node' requested
Dec 7 06:48:34 pim udev[13789]: create_path: created 'udev-root/1/2/c'
Dec 7 06:48:34 pim udev[13789]: create_path: created 'udev-root/1/2/c/d'
Dec 7 06:48:34 pim udev[13789]: create_node: symlink(../../a/b/node, udev-root/1/2/c/d/symlink)
|
|
01-overall-whitespace+debug-text-conditioning.diff
o cleanup whitespace
o clarify a few comments
o enclose all printed debug string values in ''
|
|
support subdirectory creation/removal for NAME="/devfs/is/crazy/video0"
create parent subdirs for device node if needed
remove subdirs when last node is removed
|
|
config variables
This will make running tests a lot simpler.
|
|
Now we standardise on a struct udevice to pass around, and store in the
database. This cleaned up the database code a lot.
|
|
Also delete the record after the device is gone, and fix up a memory leak.
|
|
database code still needs some major cleanup.
|
|
Here's an "idea" of what I had in mind for udevdb. Let me preface the
code with a few remarks:
1) I was expecting to write this udevdb for udev to keep track of
devices. I was planning an external package that depends upon udev
to provide an external API to the udevdb database. The calls for the
interface would be read only access. Not sure how you want to do
packaging, if having a separate package is ok or having it included
in udev.
2) I created it as it is because udev isn't a daemon. So, the open
database call doesn't take any parameters. My plan was to create a
udevdb_init function that took arguments for initializing the db
to start, where you could specify in memory only or a file location.
This can all be filled in.
3) I hacked the Makefile to get it to work. Not sure how you'd want
that in the future.
4) This assumes TDB has been installed elsewhere, you would need to
edit your Makefile and point it to the header and library locations.
How do you want to do TDB in udev? Do you want to just reference it
and make udev dependent on that package being installed. Or should
we do what samba does and include a limited tdb version in udev?
5) Again, I hacked udev into your existing code. In the future, I'd
probably make a function around the filling out the udevice before
calling the store command. Didn't know if you wanted to change
your add device function to use struct udevice rather than having
everything separate.
6) Not sure what we should include in the udevice structure that's stored
by udev. I made a stab at a first shot - we can add and remove of course,
this was a first pass. I've come to realize - with you including libsysfs
in udev, the "external" interface that references udevdb could make
use of getting information from through libsysfs from sysfs and doesn't
need to be in udevdb.
7) I could write a namedevdb for namedev's device management if you
wanted.
|
|
|
