| Age | Commit message (Collapse) | Author |
|---|
|
Also fix up some other dependancy issues in the Makefile.
Thanks to Olaf Hering <olh@suse.de> for pointing them out.
|
|
|
|
On Mon, Feb 09, 2004 at 05:41:15AM +0100, Kay Sievers wrote:
> It seems that today was just another udev-sunday for me :)
>
> Here is a working patch to compile udevd with klibc.
>
> It's sweet the static binary takes 6 kbytes and it runs
> with only 80 kbytes virtual memory.
>
> I changed a few peaces and added a siginterrupt.c file to klibc.
> We may check with hpa to get the changes upstream?
So here is the next try :)
hpa, for good reason, didn't like my changes to klibc.
He will dump signal() completely from klibc instead, so here we switch to
sigaction() and keep udevd working with klibc.
|
|
Also introduce boolean type for config file to use.
|
|
name in the syslog.
|
|
Here is the next round. We have three queues now. All incoming messages
are queued in msg_list and if nothing is missing we move it to the
running_list and exec in the background.
If the exec comes back, it removes the message from the running_list and
frees the message.
Before we exec, we check the running_list if there is a udev running on
the same device path. If yes, we move the message to the delay_list. If
the former exec comes back, we move the message to the running_list and
exec it.
The very first event is delayed now to catch possible earlier sequences,
every following event is executed without delay if no sequence is missing.
The daemon doesn't exit by itself any longer, cause we don't want to
delay every first exec.
I've put a $(PWD) for now in the Makefile for testing this beast. Only
the local binaries are executed, not the /sbin/udev. We can change it
if we are ready for real testing.
And SIGKILL can't be cought, so I removed it from the handler :)
06:58:36 sig_handler: caught signal 15
06:58:36 main: using ipc queue 0x2d548
06:58:37 message is still in the ipc queue, starting daemon...
06:58:37 work: received sequence 3, expected sequence 0
06:58:37 msg_dump_queue: sequence 3 in queue
06:58:37 set_timeout: set timeout in 1 seconds
06:58:37 main: using ipc queue 0x2d548
06:58:37 main: using ipc queue 0x2d548
06:58:37 work: received sequence 1, expected sequence 1
06:58:37 msg_dump_queue: sequence 1 in queue
06:58:37 msg_dump_queue: sequence 3 in queue
06:58:37 msg_dump: sequence 1, 'add', '/block/sda', 'block'
06:58:37 msg_exec: child [8038] created
06:58:37 running_moveto_queue: move sequence 1 [8038] to running queue '/block/sda'
06:58:37 set_timeout: set timeout in 5 seconds
06:58:37 work: received sequence 2, expected sequence 2
06:58:37 msg_dump_queue: sequence 2 in queue
06:58:37 msg_dump_queue: sequence 3 in queue
06:58:37 msg_dump: sequence 2, 'add', '/block/sdb', 'block'
06:58:37 msg_exec: child [8039] created
06:58:37 running_moveto_queue: move sequence 2 [8039] to running queue '/block/sdb'
06:58:37 msg_dump: sequence 3, 'add', '/block/sdc', 'block'
06:58:37 msg_exec: child [8040] created
06:58:37 running_moveto_queue: move sequence 3 [8040] to running queue '/block/sdc'
06:58:37 main: using ipc queue 0x2d548
06:58:37 main: using ipc queue 0x2d548
06:58:37 work: received sequence 4, expected sequence 4
06:58:37 msg_dump_queue: sequence 4 in queue
06:58:37 msg_dump: sequence 4, 'remove', '/block/sdc', 'block'
06:58:37 msg_exec: delay exec of sequence 4, [8040] already working on '/block/sdc'
06:58:37 delayed_moveto_queue: move event to delayed queue '/block/sdc'
06:58:37 msg_exec: child [8043] created
06:58:37 running_moveto_queue: move sequence 4 [8043] to running queue '/block/sdc'
06:58:37 work: received sequence 5, expected sequence 5
06:58:37 msg_dump_queue: sequence 5 in queue
06:58:37 msg_dump: sequence 5, 'remove', '/block/sdb', 'block'
06:58:37 msg_exec: delay exec of sequence 5, [8039] already working on '/block/sdb'
06:58:37 delayed_moveto_queue: move event to delayed queue '/block/sdb'
06:58:37 msg_exec: child [8044] created
06:58:37 running_moveto_queue: move sequence 5 [8044] to running queue '/block/sdb'
06:58:37 main: using ipc queue 0x2d548
06:58:37 main: using ipc queue 0x2d548
06:58:37 work: received sequence 8, expected sequence 6
06:58:37 msg_dump_queue: sequence 8 in queue
06:58:37 set_timeout: set timeout in 5 seconds
06:58:37 work: received sequence 6, expected sequence 6
06:58:37 msg_dump_queue: sequence 6 in queue
06:58:37 msg_dump_queue: sequence 8 in queue
06:58:37 msg_dump: sequence 6, 'remove', '/block/sda', 'block'
06:58:37 msg_exec: delay exec of sequence 6, [8038] already working on '/block/sda'
06:58:37 delayed_moveto_queue: move event to delayed queue '/block/sda'
06:58:37 msg_exec: child [8047] created
06:58:37 running_moveto_queue: move sequence 6 [8047] to running queue '/block/sda'
06:58:37 set_timeout: set timeout in 5 seconds
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8038
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8039
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8040
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8043
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8044
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:38 sig_handler: caught signal 17
06:58:38 sig_handler: exec finished, pid 8047
06:58:38 set_timeout: set timeout in 4 seconds
06:58:38 msg_dump_queue: sequence 8 in queue
06:58:39 main: using ipc queue 0x2d548
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 9, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 work: received sequence 11, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 10, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 10 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 13, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 10 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 msg_dump_queue: sequence 13 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 14, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 10 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 msg_dump_queue: sequence 13 in queue
06:58:39 msg_dump_queue: sequence 14 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:39 main: using ipc queue 0x2d548
06:58:39 work: received sequence 15, expected sequence 7
06:58:39 msg_dump_queue: sequence 8 in queue
06:58:39 msg_dump_queue: sequence 9 in queue
06:58:39 msg_dump_queue: sequence 10 in queue
06:58:39 msg_dump_queue: sequence 11 in queue
06:58:39 msg_dump_queue: sequence 13 in queue
06:58:39 msg_dump_queue: sequence 14 in queue
06:58:39 msg_dump_queue: sequence 15 in queue
06:58:39 set_timeout: set timeout in 3 seconds
06:58:41 main: using ipc queue 0x2d548
06:58:41 work: received sequence 12, expected sequence 7
06:58:41 msg_dump_queue: sequence 8 in queue
06:58:41 msg_dump_queue: sequence 9 in queue
06:58:41 msg_dump_queue: sequence 10 in queue
06:58:41 msg_dump_queue: sequence 11 in queue
06:58:41 msg_dump_queue: sequence 12 in queue
06:58:41 msg_dump_queue: sequence 13 in queue
06:58:41 msg_dump_queue: sequence 14 in queue
06:58:41 msg_dump_queue: sequence 15 in queue
06:58:41 set_timeout: set timeout in 1 seconds
06:58:42 sig_handler: caught signal 14
06:58:42 sig_handler: event timeout reached
06:58:42 event 8, age 5 seconds, skip event 7-7
06:58:42 msg_dump: sequence 8, 'add', '/block/sdb', 'block'
06:58:42 msg_exec: child [8057] created
06:58:42 running_moveto_queue: move sequence 8 [8057] to running queue '/block/sdb'
06:58:42 msg_dump: sequence 9, 'add', '/block/sdc', 'block'
06:58:42 msg_exec: child [8058] created
06:58:42 running_moveto_queue: move sequence 9 [8058] to running queue '/block/sdc'
06:58:42 msg_dump: sequence 10, 'remove', '/block/sdc', 'block'
06:58:42 msg_exec: delay exec of sequence 10, [8058] already working on '/block/sdc'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sdc'
06:58:42 msg_exec: child [8059] created
06:58:42 running_moveto_queue: move sequence 10 [8059] to running queue '/block/sdc'
06:58:42 msg_dump: sequence 11, 'remove', '/block/sdb', 'block'
06:58:42 msg_exec: delay exec of sequence 11, [8057] already working on '/block/sdb'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sdb'
06:58:42 msg_exec: child [8060] created
06:58:42 running_moveto_queue: move sequence 11 [8060] to running queue '/block/sdb'
06:58:42 msg_dump: sequence 12, 'remove', '/block/sda', 'block'
06:58:42 msg_exec: child [8061] created
06:58:42 running_moveto_queue: move sequence 12 [8061] to running queue '/block/sda'
06:58:42 msg_dump: sequence 13, 'add', '/block/sda', 'block'
06:58:42 msg_exec: delay exec of sequence 13, [8061] already working on '/block/sda'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sda'
06:58:42 msg_exec: child [8062] created
06:58:42 running_moveto_queue: move sequence 13 [8062] to running queue '/block/sda'
06:58:42 msg_dump: sequence 14, 'add', '/block/sdb', 'block'
06:58:42 msg_exec: delay exec of sequence 14, [8057] already working on '/block/sdb'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sdb'
06:58:42 msg_exec: child [8063] created
06:58:42 running_moveto_queue: move sequence 14 [8063] to running queue '/block/sdb'
06:58:42 msg_dump: sequence 15, 'add', '/block/sdc', 'block'
06:58:42 msg_exec: delay exec of sequence 15, [8058] already working on '/block/sdc'
06:58:42 delayed_moveto_queue: move event to delayed queue '/block/sdc'
06:58:42 msg_exec: child [8064] created
06:58:42 running_moveto_queue: move sequence 15 [8064] to running queue '/block/sdc'
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8057
06:58:43 sig_handler: exec finished, pid 8058
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8059
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8060
06:58:43 sig_handler: exec finished, pid 8061
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8062
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8063
06:58:43 sig_handler: caught signal 17
06:58:43 sig_handler: exec finished, pid 8064
|
|
|
|
Here we get the ability to query with the name of the node instead of
the device path. It uses a linear search over the whole database.
kay@pim:~/src/udev.kay$ ./udev -q path -n video/webcam0
/class/video4linux/video0
New version, with better function return codes for error handling.
|
|
On Thu, Jan 15, 2004 at 05:14:16AM +0100, Kay Sievers wrote:
> On Wed, Jan 14, 2004 at 01:10:43PM -0800, Greg KH wrote:
> > On Wed, Jan 14, 2004 at 02:34:26PM -0600, Clay Haapala wrote:
> > > On Wed, 14 Jan 2004, Chris Friesen spake thusly:
> > > >
> > > > Maybe for ones with a matching rule, you could print something like:
> > > >
> > > >
> > > Is the act of printing/syslogging a rule in an of itself?
> >
> > No, as currently the only way stuff ends up in the syslog is if
> > DEBUG=true is used on the build line.
> >
> > But it's sounding like we might want to change that... :)
>
> How about this in the syslog after connect/disconnect?
>
> Jan 15 05:07:45 pim udev[28007]: configured rule in '/etc/udev/udev.rules' at line 17 applied, 'video*' becomes 'video/webcam%n'
> Jan 15 05:07:45 pim udev[28007]: creating device node '/udev/video/webcam0'
> Jan 15 05:07:47 pim udev[28015]: removing device node '/udev/video/webcam0'
Here is a slightly better version. I've created a logging.h file and
moved the debug macros from udev.h in there.
If you type:
'make' - you will get a binary that prints one or two lines to syslog
if a device node is created or deleted
'make LOG=false' - you get a binary that prints asolutely nothing
'make DEBUG=true' - the same as today, it will print all debug lines
|
|
|
|
|
|
|
|
Here is the '-h' and a '-d' to dump the whole database:
kay@pim:~/src/udev.kay$ ./udev -d
P: /block/hdb/hdb1
N: hdb1
S:
O:
G:
P: /class/video4linux/video0
N: video/webcam0
S: camera0 kamera0
O: 500
G: 500
P: /block/hdc
N: hdc
S:
O:
G:
|
|
This patch improves the user options for udev.
It is possible now to query for the name, the symlinks or owner/group.
If asked for the name of the node we are able to prepend the udev_root
with the -r option.
SAMPLE:
kay@pim:~/src/udev.test$ ./udev -V
udev, version 012_bk
kay@pim:~/src/udev.test$ ./udev -h
Usage: [-qrVh]
-q <name> query database for the specified value
-p <path> device path used for query
-r print udev root
-V print udev version
-h print this help text
kay@pim:~/src/udev.test$ ./udev -r
/udev/
kay@pim:~/src/udev.test$ ./udev -q name -p /class/video4linux/video0
video/webcam0
kay@pim:~/src/udev.test$ ./udev -q symlink -p /class/video4linux/video0
camera0 kamera0
kay@pim:~/src/udev.test$ ./udev -q owner -p /class/video4linux/video0
501
kay@pim:~/src/udev.test$ ./udev -r -q name -p /class/video4linux/video0
/udev/video/webcam0
|
|
Hello,
without this patch:
wolf@duel:/tmp/ud/udev-012>gcc -v
Reading specs from /usr/lib/gcc-lib/i386-slackware-linux/2.95.3/specs
gcc version 2.95.3 20010315 (release)
cannot compile udev.
|
|
On Wed, Dec 31, 2003 at 11:24:53AM -0800, Greg KH wrote:
> > There should be a possibility to tell udev not to create a device node.
> >
> > device-mapper: Usually set up by libdevmapper (or EVMS tools) which
> > creates the device node on its own under /dev/mapper/<name>.
> >
> > With udev a second device is created named /dev/dm-<minor> which is not
> > really needed.
>
> Good point. Ok, I'll agree with you. Care to make up a patch for this
> kind of feature?
Yes, I can try.
There was no way to tell not to do anything so I created one. Errors
are signalled via negative return values, so I thought that a positive,
non-zero one could mean to ignore the device. I don't like it but
perhaps you have a better solution.
|
|
This one is nothing important, just add some quotes to be more consistent
with the rest and make sure that the return value is positive (since the
error return values are negative). Hmm?
|
|
Thanks to Kay for the original patch, and the idea.
|
|
As usual, here is the corresponding man page update and
a small text correction.
|
|
Here is a slightly better version that prints the usage if a unknown option is given:
kay@pim:~/src/udev.kay$ ./udev -x
./udev: invalid option -- x
Usage: [-qrVh]
-q arg query database
-r print udev root
-V print udev version
-h print this help text
> Here is a patch that makes it possible to call udev with options on the command line.
> Valid options are for now:
>
> -V for the udev version:
> kay@pim:~/src/udev.kay$ ./udev -V
> udev, version 011_bk
>
> -r for the udev root:
> kay@pim:~/src/udev.kay$ ./udev -r
> /udev/
>
> -q to query the database with the sysfs path for the name of the node:
> kay@pim:~/src/udev.kay$ ./udev -q /class/video4linux/video0
> test/video/webcam0
|
|
enough stuff.
|
|
Here's a patch that adds a signal handler to udev to
clean up the environment (close the sysbus and close
the database) on kill-signals.
|
|
Seems like we need the following patch to do
proper sysbus cleanup, if udevdb_init() fails.
|
|
#ifdef crud from the main code.
|
|
Attached is a patch against udev-008 to send out a D-BUS message when a
device node is added or removed.
Using D-BUS lingo, udev acquires the org.kernel.udev service and sends
out a NodeCreated or NodeDeleted signal on the
org.kernel.udev.NodeMonitor interface. Each signal carries two
parameters: the node in question and the corresponding sysfs path.
[Note: the D-BUS concepts of service, interface, object can be a bit
confusing at first glance]
An example program listening for these messages looks like this
#!/usr/bin/python
import dbus
import gtk
def udev_signal_received(dbus_iface, member, service, object_path, message):
[filename, sysfs_path] = message.get_args_list()
if member=='NodeCreated':
print 'Node %s created for %s'%(filename, sysfs_path)
elif member=='NodeDeleted':
print 'Node %s deleted for %s'%(filename, sysfs_path)
def main():
bus = dbus.Bus(dbus.Bus.TYPE_SYSTEM)
bus.add_signal_receiver(udev_signal_received,
'org.kernel.udev.NodeMonitor', # interface
'org.kernel.udev', # service
'/org/kernel/udev/NodeMonitor') # object
gtk.mainloop()
if __name__ == '__main__':
main()
and this is the output when hot-plugging some usb-storage.
[david@laptop udev-008]$ ~/node_monitor.py
Node /udev/sda created for /block/sda
Node /udev/sda1 created for /block/sda/sda1
Node /udev/sda1 deleted for /block/sda/sda1
Node /udev/sda deleted for /block/sda
The patch requires D-BUS 0.20 or later while the python example program
requires D-BUS from CVS as I only recently applied a patch against the
python bindings.
|
|
Now there are only 3 valid environment test variables. The rest can be
specified with the config file.
|
|
the older udev.config file is now called udev.rules.
This allows us to better control configuration values, and move away from
the environment variables.
|
|
be LSB compliant
Finally the Debian people can get off my back...
|
|
01-overall-whitespace+debug-text-conditioning.diff
o cleanup whitespace
o clarify a few comments
o enclose all printed debug string values in ''
|
|
|
|
and udev.config
the namedev name didn't really make much sense anymore...
|
|
|
|
config variables
This will make running tests a lot simpler.
|
|
|
|
This patch adds a callout config type to udev, so external programs can be
called to get serial numbers or id's that are not available as a sysfs
attribute.
|
|
This patch:
1) removes the three database files for just one udevdb.tdb file.
2) adds udevdb_init() and udevdb_exit() functions
3) initializes database now in main() in udev.c.
Please look it over.
|
|
|
|
|
|
needs lots more cleanup, but is much nicer than doing this by hand...
|
|
.permission parsing works, .config needs more work.
|
|
the files we need.
|
|
|
|
|
|
|
|
|
