summaryrefslogtreecommitdiff
path: root/udev.h
AgeCommit message (Collapse)Author
2006-08-28update source file headersKay Sievers
2006-08-24use fnmatch() instead of our own pattern match codeKay Sievers
2006-08-20remove built-in /etc/passwd /etc/group parserKay Sievers
2006-08-19consistent key naming to match only the event device or include all parent ↵Kay Sievers
devices This scheme is more consistent and makes it obvious if a match happens against the event device only, or the full chain of parent devices. The old key names are now: BUS -> SUBSYSTEMS ID -> KERNELS SYSFS -> ATTRS DRIVER -> DRIVERS Match keys for the event device: KERNEL SUBSYSTEM ATTR DRIVER (in a future release, for now the same as DRIVERS) Match keys for all devices along the parent device chain: KERNELS SUBSYSTEMS ATTRS DRIVERS ID, BUS, SYSFS are no longer mentioned in the man page but still work. DRIVER must be converted to DRIVERS to match the new scheme. For now, an error is logged, if DRIVER is used. In a future release, the DRIVER key behaviour will change.
2006-08-16rename udev_libc_wrapper -> udev_sysdepsKay Sievers
2006-08-13udevd: read DRIVER from the environmentKay Sievers
2006-07-06allow longer devpath valuesKay Sievers
2006-04-15apply format char to variables exported by ENVKay Sievers
2006-04-12remove old symlinks before creating current onesKay Sievers
This will prevent incorrect symlinks when a filesystem label is changed and the event is triggered again from sysfs.
2006-04-05merge device event handling and make database content available on "remove"Kay Sievers
2006-01-29optimize sysfs device and attribute cacheKay Sievers
Add negative cache for attributes and look for device in cache before doing any sysfs access. (Three times speed up for a stupid 1000 rules SYSFS file). Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2006-01-18scsi_id, usb_id: request device parent by subsystemKay Sievers
Request specific parents identified by subsystem and don't rely on a predefined sequence. Also let the devpath be longer than 72 chars, tsss ... Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2006-01-16fix BUS, ID, $id usageKay Sievers
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2006-01-13better log test and commentsKay Sievers
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2006-01-09replace libsysfsKay Sievers
We never used any of the libsysfs convenience features. Here we replace it completely with 300 lines of code, which are much simpler and a bit faster cause udev(d) does not open any syfs file for a simple event which does not need any parent device information. Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-12-17add DEVLINKS to the event environmentKay Sievers
Multiple symlinks are separated by a space character. Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-12-16remove unused variablesKay Sievers
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-11-16remove "udev_db" option from config fileKay Sievers
All udev state is kept in /$udev_root/.udev/ now. No option to configure that anymore, it will always be there. Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-11-12remove all built-in wait_for_sysfs logicKay Sievers
Most of the issues are fixed with the kernel we depend on, for the remaing ones see the RELEASE-NOTES for a special rule to add. Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-11-07udevd: depend on netlink and remove all sequence reorder logicKay Sievers
Netlink will never get out-of-order and we just depend on it from now on. Udevsend messages will have no effect if they contain a sequence number (SEQNUM). Thanks to Bastian Blank <waldi@debian.org>, for the debugging session which identified a bug where the timeouts are not working if inotify was not available. All the timeout handling is removed now and this issue should be solved. Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-07-22move code to its own filesKay Sievers
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-07-07fix default-name handling and NAME="" rulesKay Sievers
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-07-06rename ALARM_TIMEOUT to UDEV_ALARM_TIMEOUTKay Sievers
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-06-26store the imported device information in the udevdbKay Sievers
Any program can query with udevinfo for persistent device attributes evaluated on device discovery now. Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-06-05udev: handle all events - not only class and block devicesKay Sievers
Handle all events with rules. If udev is expected to handle hotplug.d/ the exernal helper must be called. Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-06-05udev: move dev.d/ handling to external helperKay Sievers
Modern rules are expected to call notification and postprocessing with the RUN key. For compatibility the current behavior can be emulated with an external helper. Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-06-05udev: allow final assignments :=Kay Sievers
The use of KEY:=<value> will make the key unchangeable by later rules. Signed-off-by: Kay Sievers <kay.sievers@suse.de>
2005-04-26[PATCH] add RUN key to be able to run rule based notificationkay.sievers@vrfy.org
SUBSYSTEM=="block", RUN="/sbin/program" will execute the program only for block device events. ACTION="remove", SUBSYSTEM=="block", RUN"/sbin/program" will execute the program, if a block device is removed.
2005-04-26[PATCH] support log-priority levels in udev.confkay.sievers@vrfy.org
2005-04-26[PATCH] correct enum device_typekay.sievers@vrfy.org
2005-04-26[PATCH] replace strncpy()/strncat() by strlcpy()/strlcat()kay.sievers@vrfy.org
2005-04-26[PATCH] allow unlimitied count of symlinkskay.sievers@vrfy.org
2005-04-26[PATCH] remove typedef for call_foreach_file() handler functionkay.sievers@vrfy.org
2005-04-26[PATCH] correct udev_init_devicekay.sievers@vrfy.org
2005-04-26[PATCH] move kernel name/number evaluation into udev_init_device()kay.sievers@vrfy.org
2005-04-26[PATCH] switch device type to enumkay.sievers@vrfy.org
2005-04-26[PATCH] switch major/minor to dev_tkay.sievers@vrfy.org
2005-04-26[PATCH] create /block/*/range count of partitons for all_partitionskay.sievers@vrfy.org
2005-04-26[PATCH] provide temporary device node for callouts to access the devicekay.sievers@vrfy.org
%N will create a temporary node for a callout a be sustituted with the name of the node.
2005-04-26[PATCH] remove default_* permissions from udev.conf filekay.sievers@vrfy.org
With the "permissions only rules" we can just place: MODE="0660", OWNER="root", GROUP="root" at the beginning of the rules file and get exactly the same behavior. If no values are given the compiled-in defaults are used.
2005-04-26[PATCH] allow multiline rules by backslash at the end of the linekay.sievers@vrfy.org
On Sun, 2004-12-19 at 18:31 +0100, Marco d'Itri wrote: > > On Dec 19, Kay Sievers <kay.sievers@vrfy.org> wrote: > > > (Feature request: would it be possible to extend the rules files parser > > to support continuation lines? I'd like it to consider lines starting > > with white space as part of the previous line.) > > How about the usual backslash at the end of the line. Here is a simple > patch.
2005-04-26[PATCH] complete removal of explicit udev permissions config filekay.sievers@vrfy.org
2005-04-26[PATCH] remove unused timestamp fieldkay.sievers@vrfy.org
2005-04-26[PATCH] simplify permission handlingkay.sievers@vrfy.org
Initialize the defaults in udev_config.c instead of namedev.c. Replace macro by expanded code. Switch to mode_t instead of string value. Add and clarify some comments.
2005-04-26[PATCH] trivial cleanups and change some commentskay.sievers@vrfy.org
2005-04-26[PATCH] remove unused variableskay.sievers@vrfy.org
Remove udev.bus, cause it's currently unused and newer kernels will pass it in the hotplug environment as PHYSDEVBUS. Remove udev.action, cause it's unused. Rename udev_set_values() to udev_init_device().
2005-04-26[PATCH] don't call the hotplug scripts with a test runkay.sievers@vrfy.org
2005-04-26[PATCH] rename udev_lib to udev_utils and dev_d to udev_multiplexkay.sievers@vrfy.org
2005-04-26[PATCH] handle whole hotplug event with udevd/udevkay.sievers@vrfy.org
If /proc/sys/kernel/hotplug points to /sbin/udevsend we handle the whole hotplug event with multiplexing /etc/hotplug.d/.
2005-04-26[PATCH] add NAME{ignore_remove} attributekay.sievers@vrfy.org
Some broken ide drivers are generating high event traffic, with add/remove events. With this attribute, it can be specified, that the node is always available. It may be used in conjunction with the new DRIVER= match to catch specific kernel device drivers.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2025-01-10 07:45:35 +0000