| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
|
|
We never used any of the libsysfs convenience features. Here we replace
it completely with 300 lines of code, which are much simpler and a bit
faster cause udev(d) does not open any syfs file for a simple event which
does not need any parent device information.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
|
|
|
|
All udev state is kept in /$udev_root/.udev/ now. No option to
configure that anymore, it will always be there.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
|
|
|
|
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
|
|
strlcpy counts the sourec string lengt and is therefore not suitable
to copy a defined length of characters from one string to another.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
|
|
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
|
|
Handle all events with rules. If udev is expected to handle hotplug.d/
the exernal helper must be called.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
|
|
Modern rules are expected to call notification and postprocessing with
the RUN key. For compatibility the current behavior can be emulated
with an external helper.
Signed-off-by: Kay Sievers <kay.sievers@suse.de>
|
|
SUBSYSTEM=="block", RUN="/sbin/program"
will execute the program only for block device events.
ACTION="remove", SUBSYSTEM=="block", RUN"/sbin/program"
will execute the program, if a block device is removed.
|
|
udevinfo segfaults cause klibc's strlcpy writes behind the specified
size of the destination string. strlcat truncates the destination
string which is also not what you expect from a concatenation function.
|
|
Better remove characters that are useless in a device node name.
It may be a security risk to pass any character read from e.g. a
sysfs attribute to a shell script we execute later.
Prevent the modification of the libsysfs attribute value
cache.
Clear PROGRAM result if the execution encountered an error.
|
|
|
|
|
|
|
|
|
|
|
|
itself
|
|
With the "permissions only rules" we can just place:
MODE="0660", OWNER="root", GROUP="root"
at the beginning of the rules file and get exactly the same behavior.
If no values are given the compiled-in defaults are used.
|
|
On Sun, 2004-12-19 at 18:31 +0100, Marco d'Itri wrote:
> > On Dec 19, Kay Sievers <kay.sievers@vrfy.org> wrote:
>
> > (Feature request: would it be possible to extend the rules files parser
> > to support continuation lines? I'd like it to consider lines starting
> > with white space as part of the previous line.)
>
> How about the usual backslash at the end of the line. Here is a simple
> patch.
|
|
On Sun, 2004-12-19 at 18:31 +0100, Marco d'Itri wrote:
> It may be better to use default_mode="0660", I do not think that there
> are any mode 600 devices. This would allow setting only the group for
> most of them.
|
|
|
|
Initialize the defaults in udev_config.c instead of namedev.c.
Replace macro by expanded code. Switch to mode_t instead
of string value. Add and clarify some comments.
|
|
|
|
|
|
This makes the udev operation completely lockless by storing a
file for every node in /dev/.udevdb/* This solved the problem
with deadlocking concurrent udev processes waiting for each other
to release the file lock under heavy load.
|
|
Here we remove all the sysfs sleep loops from udev as wait_for_sysfs
will do this for us and any other hotplug user. We still keep a small
blacklist of subsystems we don't care about but any missing entry here
will no longer lead to a spinning udev waiting for files.
|
|
On Tue, Sep 14, 2004 at 02:53:12PM +0200, Loleslaw wrote:
> Hi,
> Since I started using udev-031 on my gentoo udevstart would just segfault
> (udev-030 worked). As it turned out I had a file in /etc/udev/permissions.d
> with a single space in one line. I've cleaned the file and it works all
> right, but I thought you could be interested.
> I've traced it to function namedev_init_permissions in namedev_parse.c
> I don't know C well enough to suggest a patch.
Yeah, thanks for pointing that out. It only happens if the file ends with
whitespace-only lines. Here is a fix and a test for udev-test.pl to
cover that case.
|
|
Hi Kay,
On 23:12 Sat 04 Sep , Kay Sievers wrote:
> Cool, a real bug :)
> Thanks, for the patch. I think it would be better to skip lenghth exceeding
> lines instead of cutting it and continue. While looking at it I restructured
> the buffer reading logic a bit and fixed another stupid bug.
Thanks for the cleanup.
You may have overlooked the fix for udev_config.c(parsing udev.conf) in
your patch. So, I've adapted the fixes you applied to namedev_parse.c
to this file also.
Also, while 'eating' the whitespace the 'count' doesn't get decremented.
This leads strncpy to copy the number of whitespace minus 1 characters
from the next line. Minus 1 because it copies '\n' from the current
line.
while (isspace(bufline[0])) {
bufline++;
+ count--;
}
.
.
.
strncpy(line, bufline, count);
Included patch(against udev-030) contains the above fixes as well as
your fixes.
Signed-off-by: Arun Bhanu <arun@codemovers.org>
|
|
Small patch to fix the evaluation logic for the return value of getenv()
in udev_config.c file. Basically, the actual values for the environment
variables "UDEV_NO_SLEEP" and "UDEV_NO_DEVD" were not being checked.
For example UDEV_NO_SLEEP could have been set to false but the line:
if (getenv("UDEV_NO_SLEEP") != NULL)
in this case would always evaluate to true, since getenv() returns
char*, thus the "udev_sleep" variable would be set incorrectly. The
patch makes sure to check the value returned by getenv() not just if
getenv() returned a value. Hope this made sense. Thanks,
|
|
Here we catch up, after the default config changes.
o the man page is updated to reflect the new default config
o /etc/udev/rules.d/ + permissions.d/ dirs are created now
o udev.rules is installed in /etc/udev/rules.d/50-udev.rules
so the user can easily order the files by prepending a number.
(RedHat has the same name in the last rpm.)
o defined directory names in the Makefile are all without slashes now,
not the first half with and the remaining without.
o all binaries are uninstalled now
o leading slashes in config values are now removed or prepended while the
config is parsed, so we are more robust if the usere changes something.
o replaced the macros from udev_config.c with real code, cause we can
skip if the value matches and not useless iterate over the remaining
fields.
o config parsing errors are logged with info() now, fixes the bug where
we report a error with debug_parse(), even when there isn't one
|
|
Here we change the DEVPATH for netdev's in the environment of the dev.d/
scripts to the name the device is renamed to. The original name doesn't
exist in the kernel after rename.
|
|
Here is a patch to change the netdev handling in the database and for
the dev.d/ calls. I applies on top of the udevd.patch, cause klibc has
no sysinfo().
o netdev's are also put into our database now. I want this for the
udevruler gui to get a list of all handled devices.
All devices in the db are stamped with the system uptime value at
the creation time. 'udevinfo -d' prints it.
o the DEVPATH value is the key for udevdb, but if we rename
a netdev, the name is replaced in the kernel, so we add
the changed name to the db to match with the remove event.
NOTE: The dev.d/ scripts still get the original name from the
hotplug call. Should we replace DEVPATH with the new name too?
o We now only add a device to the db, if we have successfully created
the main node or successfully renamed a netdev. This is the main part
of the patch, cause I needed to clean the retval passing trough all
the functions used for node creation.
o DEVNODE sounds a bit ugly for netdev's so I exported DEVNAME too.
Can we change the name?
o I've added a UDEV_NO_DEVD to possibly skip the script execution
and used it in udev-test.pl.
udevstart is the same horror now, if you have scripts with logging
statements in dev.d/ it takes minutes to finish, can we skip the
scripts here too?
o The get_device_type() function is changed to be more strict, cause
'udevinfo -a -p /block/' gets a class device for it and tries to
print the major/minor values.
o bugfix, the RESULT value has now a working newline removal and a test
for this case.
|
|
Here we replace the various fgets() with a mmap() call for the config
file reading, due to the reported performance problems with klibc.
Thanks to Patrick's testing, it makes a very small, close to nothing
speed gain for libc users, but a 6 times speed increase for klibc users
with a 1000 line config file.
I've created a udev_lib.[hc] for this and also moved all the generic
stuff from udev.h in there and uninlined the functions.
|
|
Hey, I wrote the strn*() macros just 10 days ago and yesterday this trap
caught me with the %c{x} bug.
The names are misleading cause we all expect that the from field is limited by
the size argument, but we actually limit the overall size of the destination
string to prevent a overflow.
Here we rename all strn*() macros to str*max(). That should be
more self-explanatory.
|
|
As promised, here is the next round. We provide in addition to the
already used macros:
strfieldcpy(to, from)
strfieldcat(to, from)
the corresponding friends, if the size of the target is not known and
must be provided by the caller:
strnfieldcpy(to, from, maxsize)
strnfieldcat(to, from, maxsize)
and switch nearly all possibly unsafe users of strcat(), strncat(),
strcpy() and strncpy() to these safer macros.
The last known remaining issue seems the use of sprintf() and
snprintf(). I will take on it later today or tomorrow.
|
|
external one.
Should fix some more build bugs...
|
|
Use the new location of libsysfs header files.
|
|
happy.
Actually, I'm happy to, startup time is much smaller...
|
|
Also introduce boolean type for config file to use.
|
|
Once again, patch to make logging a config option.
Reason for this (since you asked for it):
- In our setup it is easy (although still annoying) .. just edit the
ebuild, add logging support (or remove it) and rebuild. For say a
binary distro, having the logging is useful for debugging some
times, but its more a once of, or rare thing, as you do not add or
change config files every day. Sure, we can have logging by
default, but many do not want ~300 lines of extra debugging in their
logs is not pleasant, and they will complain. Rebuilding the
package for that binary package (given the users it is targeted to)
is usually not within most users grasp.
|
|
namedev.o
|
|
I've edited the man page today, so this is alreay included :)
Also a few more trivials:
o added the defaults to udev.conf.in
o removed class_dev from get_default_mode(), to match with Hanna's
o changed size of mode_str to MODE_SIZE
o changed a few char compares from from 0x00 to '\0'
|
|
This patch fixes a bug where the udev database stored empty strings
for Owner and Group if they were default. This patch stores the default
value into the database if not set otherwise. See example output:
crw------- 1 root root 4, 65 Jan 16 11:13 ttyS1
P: /class/tty/ttyS1
N: ttyS1
S:
O: root
G: root
This is a bit of a hack. However, until udev supports setting the
o/g values they will be root/root anyway so the database might as
well reflect the truth instead of empty strings.
|
|
On Thu, Jan 15, 2004 at 05:14:16AM +0100, Kay Sievers wrote:
> On Wed, Jan 14, 2004 at 01:10:43PM -0800, Greg KH wrote:
> > On Wed, Jan 14, 2004 at 02:34:26PM -0600, Clay Haapala wrote:
> > > On Wed, 14 Jan 2004, Chris Friesen spake thusly:
> > > >
> > > > Maybe for ones with a matching rule, you could print something like:
> > > >
> > > >
> > > Is the act of printing/syslogging a rule in an of itself?
> >
> > No, as currently the only way stuff ends up in the syslog is if
> > DEBUG=true is used on the build line.
> >
> > But it's sounding like we might want to change that... :)
>
> How about this in the syslog after connect/disconnect?
>
> Jan 15 05:07:45 pim udev[28007]: configured rule in '/etc/udev/udev.rules' at line 17 applied, 'video*' becomes 'video/webcam%n'
> Jan 15 05:07:45 pim udev[28007]: creating device node '/udev/video/webcam0'
> Jan 15 05:07:47 pim udev[28015]: removing device node '/udev/video/webcam0'
Here is a slightly better version. I've created a logging.h file and
moved the debug macros from udev.h in there.
If you type:
'make' - you will get a binary that prints one or two lines to syslog
if a device node is created or deleted
'make LOG=false' - you get a binary that prints asolutely nothing
'make DEBUG=true' - the same as today, it will print all debug lines
|
|
Now there are only 3 valid environment test variables. The rest can be
specified with the config file.
|
