| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
==4304== Syscall param sigaction(act) contains uninitialised or unaddressable byte(s)
==4304== at 0x804A37B: (within /sbin/udevd)
==4304== Address 0x52BFE7FC is on thread 1's stack
|
|
If the system reaches a defined limit of processes in running state, udevd
starts to count its own processes in running state from its session (all
forked hotplug child processes, subprocesses and callouts) and throttles
further process forking if the limit is reached.
This should help setups with hundreds of events emitted hotplug events
in parallel with hundreds of processes in "R" state. which makes the machine
unresponsible.
I placed a 100% cpu time consuming program in /etc/hotplug.d/ which runs for 5
seconds. With this patch I can load "scsi_debug add_host=100" without any major
problem. Without the patch the box is completly unresponsible for many minutes.
|
|
UDEVD_EXPECTED_SEQNUM=$[`cat /sys/kernel/hotplug_seqnum` + 1] ./udevd -d
will init udevd, so the next event will not wait for any timeout.
|
|
manager if it doesn't find /dev/null
|
|
|
|
|
|
|
|
We delay the execution of events if there is already an event running for
the same device, a parent or a child device. "add" events with a reference
to a physical device will also wait for the physical device to finish.
Here we fix the devpath comparison logic to return "busy" only if a complete
device names is matching. /block/sdaa will not longer block a /block/sda event.
|
|
Define an inititialization phase, where we delay the events only
for a short time to eventually recollect the event sequence instead
of delaying the very first events for 10 seconds, which breaks the
firmware loader.
|
|
If we take over the hotplug call and manage the events we don't need
to call the event fake script in dev.d/. Just set all expected values
to the new network interface name and call hotplug.d/. This way the
device renaming is completely handled inside of udev and userspace
can't get confused.
|
|
|
|
Currently udevd delays only events for the same DEVPATH.
Example of an "add" event sequence:
/block/sda
/block/sda/sda1
With this change, we make sure, that the udev process handling
/block/sda has finished its work (waited for all attributes,
created the node) before we fork the udev event for /block/sda/sda1.
This way the event for sda1 can be sure, that the node for the
main device is already created (may be useful for disk labels).
It will not affect any parallel device handling, only the sequence
of the devices directory chain is serialized. The 10.000 disks
plugged in will still run as parallel events. :)
The main motivation to do this is the program execution of the
dev.d/ and hotplug.d/ directory. If we don't wait for the parent
event to exit, we can't be sure that the executed scripts are
run in the right order.
On Thu, Dec 09, 2004 at 09:18:28AM +0100, Kay Sievers wrote:
> On Wed, 2004-12-08 at 19:07 -0800, David Brownell wrote:
> > Could that argument apply to the underlying hardware, too?
> We now make sure that the sequence of events for a device
> is serialized for every device chain and the class/block
> devices which have a "device" link to a physical device are
> handled after the physical device is fully populated and
> notified to userspace. It will only work this way on kernels
> later than 2.6.10-rc1 cause it depends on the PHYSDEVPATH
> value in the hotplug environment.
|
|
Accept event without a subsystem and pass it through udevd.
Pass empty environment while starting udevd.
|
|
|
|
This will prevent a loop, if udev sends events back into the
daemon.
|
|
|
|
|
|
Just move the event straight to the exec list and don't try
to compare a NULL pointer.
|
|
|
|
Make _all_ hotplug variables available to the forked udev,
the udev callouts and the udev dev.d/ scripts. We put the
whole environment into a buffer and send it over the udevd
socket. udevd recreates *envp[] and passes it to the exec().
|
|
|
|
|
|
Change to the same timeout loop we use in the rest of the code. Change
some comments and names to be more descriptive.
I'm mostly finished with the overall cleanup. I will post a new patch
for the udevd-nofork experiment, which will be much smaller now.
|
|
|
|
Seems that we never closed the opened syslog.
Here is a patch to do this in all our binaries.
|
|
This patch fixes the reintroduced bug with the
sig_handler(), if we link against a -mregparm=3 compiled
klibc on i386.
It also fixes some compiler warnings about redefined
asmlinkage on some systems.
Also some (broken?) compilers on distros throw out warnings
if asmlinkage is before "static void". This fixes it, too.
|
|
This patch fixes two
warning: assignment from incompatible pointer type
asmlinkage is the reason for the warning. We can
simply cast to avoid it.
It also fixes this warning:
warning: implicit declaration of function `umask'
|
|
selinux wants a clean fd set, so better close all open fds
|
|
posted by Steve Grubb on https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=130351
|
|
The kernel will use a u64 for the sequence number, so we want the same.
|
|
here we change udevd to pass the SEQNUM from the hotplug environment
to udev and the dev.d/ scripts. We need this for HAL to match the
hotplug event with the dev.d/ events.
It also changes the type from int to long to match the kernel.
|
|
The following patch adds 'asmlinkage' defines to udev, to kill off 2
warnings on !i386.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
|
|
The recent version of klibc switched to -mregparm=3. This broke the
signal handlers parameter, cause it is called directly from the kernel
with the parameter on the stack not in a register.
|
|
Our own implementation of the sysinfo system call is no longer
needed, cause it's merged it into klibc now.
|
|
Thanks to Yin, Hu <hu.yin@intel.com>, who made a nice perl script to test the
expected behavior of the udevd sequence number handling. The test sends
different SEQNUM sequences to udevd, while analyzing the reordering and timeout
handling of udevd.
|
|
Here we switch the msg_dump() to #define instead of commenting it out.
|
|
|
|
Here we change the DEVPATH for netdev's in the environment of the dev.d/
scripts to the name the device is renamed to. The original name doesn't
exist in the kernel after rename.
|
|
here is a patch on top of your nice improvements.
I fixed the whitespace and it hopefully fixes the stupid timestamp bug in
udevd. Some stupid OS sets the hwclock to localtime and linux changes it
to UTC while starting. If any events are pending they may be delayed by
the users time distance from UTC :) So we use the uptime seconds now.
|
|
This patch covers a number of areas:
1) sysfs.h is fixed up to use the common dbg() macro. This fixes the
case where DEBUG is defined but USE_LOG isn't.
2) udevstart.c is modified to include the proper headers, rather than
getting them indirectly which can break depending on Makefile flags
3) udevd.c gets some major changes:
a) I added a pipe from the signal handler. This fixes the race
conditions that I mentioned earlier. Basically, the point of the pipe
is to force the select() call to return immediately if a signal handler
fired before we actually started the select() call. This then lets us
run the appropriate code based on flags set in the signal handler proper.
b) I added a number of flags to coalesce calls to common routines. This
should make things slightly more efficient.
c) since most calls will tend to come in with a sequence number larger
than what has been received, I switched msg_queue_insert() to scan the
msg_list backwards to improve performance.
filename="udevd.diff"
|
|
On Thu, Mar 25, 2004 at 02:52:13AM +0100, Kay Sievers wrote:
> Please have look if it still works for you, I only did a very quick
> test.
Here is a unified version, with all the functions moved to udev_lib.c.
We have a generic function now, to call a given fnct(char *) for every
file ending with a specific suffix, sorted in lexical order. We use it
to execute the dev.d/ files and read our rules.d/ files. The binary
should be a bit smaller now.
I've also changed it, to not do the dev.d/ exec for net devices.
|
|
Here we replace the various fgets() with a mmap() call for the config
file reading, due to the reported performance problems with klibc.
Thanks to Patrick's testing, it makes a very small, close to nothing
speed gain for libc users, but a 6 times speed increase for klibc users
with a 1000 line config file.
I've created a udev_lib.[hc] for this and also moved all the generic
stuff from udev.h in there and uninlined the functions.
|
|
Here I try to make the style a bit more consistant in the different
files, so that new patches just copy the 'right' one :)
Some "magic" numbers are replaced and udevtest.c is catched up with udev.
|
|
Here we truncate our input strings from the environment to our
defined limit. It's a bit theroretical but better check for it.
It cleans up some magic length definitions and removes the code
duplication in udev, udevtest and udevsend.
udevd needs to be killed after installation, cause the message size
is changed with this patch.
Should we do this with the 'make install', like we do with the '.udevdb'?
|
|
|
|
|
