summaryrefslogtreecommitdiff
path: root/units/.gitignore
AgeCommit message (Collapse)Author
2014-05-19resolved: add daemon to manage resolv.confTom Gundersen
Also remove the equivalent functionality from networkd.
2014-04-29timesyncd: add unit and man pageKay Sievers
2014-04-24networkd-wait-online: improve interoptability and enable by defaultTom Gundersen
To make sure we don't delay boot on systems where (some) network links are managed by someone else we don't block if something else has successfully brought up a link. We will still block until all links we are aware of that are managed by networkd have been configured, but if no such links exist, and someone else have configured a link sufficiently that it has a carrier, it may be that the link is ready so we should no longer block. Note that in all likelyhood the link is not ready (no addresses/routes configured), so whatever network managment daemon configured it should provide a similar wait-online service to block network-online.target until it is ready. The aim is to block as long as we know networking is not fully configured, but no longer. This will allow systemd-networkd-wait-online.service to be enabled on any system, even if we don't know whether networkd is the main/only network manager. Even in the case networking is fully configured by networkd, the default behavior may not be sufficient: if two links need to be configured, but the first is fully configured before the second one appears we will assume the network is up. To work around that, we allow specifying specific devices to wait for before considering the network up. This unit is enabled by default, just like systemd-networkd, but will only be pulled in if anyone pulls in network-online.target.
2014-04-22remove bus-driverd, the interface is now handled natively by bus-proxydKay Sievers
2014-01-08pam_systemd: export DBUS_SESSION_BUS_ADDRESSKay Sievers
2013-12-28gitignore: add back user@.serviceMarc-Antoine Perennou
2013-12-27build-sys: fix generation of user@.serviceZbigniew Jędrzejewski-Szmek
2013-12-17bus: install unit files for new driver serviceLennart Poettering
2013-12-13bus: install systemd-bus-proxyd unit files for compatibility with dbus1Lennart Poettering
2013-11-09networkd: add a basic network daemonTom Gundersen
This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-31machinectl: add new command to spawn a getty inside a containerLennart Poettering
2013-10-14rfkill: add new rfkill tool to save/restore rfkill state across rebootsLennart Poettering
This works analogous to the existing backlight and random seed services
2013-08-14backlight: add minimal tool to save/restore screen brightness across rebootsLennart Poettering
As many laptops don't save/restore screen brightness across reboots, let's do this in systemd with a minimal tool, that restores the brightness as early as possible, and saves it as late as possible. This will cover consoles and graphical logins, but graphical desktops should do their own per-user stuff probably. This only touches firmware brightness controls for now.
2013-07-08static-nodes: move creation of static nodes from udevd to tmpfilesTom Gundersen
As of kmod v14, it is possible to export the static node information from /lib/modules/`uname -r`/modules.devname in tmpfiles.d(5) format. Use this functionality to let systemd-tmpfilesd create the static device nodes at boot, and drop the functionality from systemd-udevd. As an effect of this we can move from systemd-udevd to systemd-tmpfiles-setup-dev: * the conditional CAP_MKNOD (replaced by checking if /sys is mounted rw) * ordering before local-fs-pre.target (see 89d09e1b5c65a2d97840f682e0932c8bb499f166)
2013-07-02machined: split out machine registration stuff from logindLennart Poettering
Embedded folks don't need the machine registration stuff, hence it's nice to make this optional. Also, I'd expect that machinectl will grow additional commands quickly, for example to join existing containers and suchlike, hence it's better keeping that separate from loginctl.
2013-05-16utmp: turn systemd-update-utmp-shutdown.service into a normal runtime serviceLennart Poettering
With this change systemd-update-utmp-shutdown.service is replaced by systemd-update-utmp.service which is started at boot and stays around until shutdown. This allows us to properly order the unit against both /var/log and auditd. https://bugzilla.redhat.com/show_bug.cgi?id=853104 https://bugs.freedesktop.org/show_bug.cgi?id=64365
2013-05-15units: rework systemd-random-seed-{load,save}.service to be a single serviceLennart Poettering
That way ordering it with MountsRequiredFor= works properly, as this no longer results in mount units start requests to be added to the shutdown transaction that conflict with stop requests for the same unit.
2013-04-30units: add an easy-to-use unit template file systemd-nspawn@.service for ↵Lennart Poettering
running containers as system services
2013-04-22units: rename systemd-static-nodes -> systemd-tmpfiles-setup-devTom Gundersen
This is really just a special case of systemd-tmpfiles-setup, moreover it could easily create more than static nodes.
2013-04-12bus: rename KDBUS_CMD_FNAME_POLICY_NONE -> KDBUS_CMD_FNAME_POLICY_OPENKay Sievers
2013-03-11Update .gitignoreMichael Biebl
for the changes in 7b40ce553f0ec9487077e53f5bdc46580025901c
2013-01-29build-sys: keep intermediate filesZbigniew Jędrzejewski-Szmek
Sometimes it is useful to look at them, and they don't take up any significant amount of space. Keeping them also avoids the message about files being removed at the end of make run.
2013-01-04build-sys: make rc-local support part of SYSV compatLennart Poettering
This also drops automatic selection of the rc local scripts based on the local distro. Distributions now should specify the paths of the rc-local and halt-local scripts on the configure command line.
2012-10-28logind: support for hybrid sleep (i.e. suspend+hibernate at the same time)Lennart Poettering
2012-09-28journal: add minimal journal gateway daemon based on GNU libmicrohttpdLennart Poettering
This minimal HTTP server can serve journal data via HTTP. Its primary purpose is synchronization of journal data across the network. It serves journal data in three formats: text/plain: the text format known from /var/log/messages application/json: the journal entries formatted as JSON application/vnd.fdo.journal: the binary export format of the journal The HTTP server also serves a small HTML5 app that makes use of the JSON serialization to present the journal data to the user. Examples: This downloads the journal in text format: # systemctl start systemd-journal-gatewayd.service # wget http://localhost:19531/entries Same for JSON: # curl -H"Accept: application/json" http://localhost:19531/entries Access via web browser: $ firefox http://localhost:19531/
2012-09-11build-sys: perform autodetection of quota-tools binariesDave Reisner
Use AC_PATH_PROG to try and locate the quotaon and quotacheck binaries, falling back on hardcoded defaults when they can't be found.
2012-07-11journal: replace implicit flushing of journal by explicit oneLennart Poettering
The old automatism that the flushing of the journal from /run to /var was triggered by the appearance of /var/log/journal is broken if that directory is mounted from another host and hence always available to be useful as mount point. To avoid probelsm with this, introduce a new unit that is explicitly orderer after all mounte files systems and triggers the flushing.
2012-07-02units: Rename systemd-udev.service to systemd-udevd.serviceColin Guthrie
This naming convention is more inline with other systemd daemon unit names (systemd-logind.service, systemd-localed.service etc) The companion .socket units have also been renamed, however the -trigger and -settle units keep their current name as these are not directly related to daemon process itself.
2012-07-02units: rename systemd-debug-shell.service to debug-shell.serviceLennart Poettering
The systemd- prefix for services should be reserved only for services that invoke our own code rather than generic, external code.
2012-06-25units: rename halt/hibernate/kexec/poweroff/reboot/suspend to systed-xxxLennart Poettering
These service units also execute our own code, hence rename the accordingly and prefix them with systemd-
2012-06-25units: rename fsck@.service to systemd-fsck@.serviceLennart Poettering
The rule is that units that encapsulate our own code are prefixed with "systemd-". Since the fsck units invoke our own code, hence add the missing prefix. Since a long long time the fsck units didn't invoke the naked fsck binaries anymore, and it is unlikely that this well ever change. On the opposite: the code in systemd-fsck will probably get more complex over time to handle fsck progress to plymouth forwarding. Same for quotacheck (but not quotaon!)
2012-06-10update .gitignoreKay Sievers
2012-06-07systemd-debug-shell: add to POTFILES.skipKay Sievers
2012-06-07delete plymouth units; moved to plymouthKay Sievers
2012-05-08sleep: implement suspend/hibernate as first class targetsLennart Poettering
2012-04-24remount: consolidate remount-api-vfs and remount-rootfs into oneLennart Poettering
This has the advantage of removing a confusing warning by mount if the root directory is not listed in fstab.
2012-04-22container: spawn a getty instead of a sulogin in a containerLennart Poettering
2012-04-17udev: install udevd as /usr/lib/systemd/systemd-udevdKay Sievers
2012-04-04units/: use @SYSTEMCTL@ instead of hardcoded pathsDave Reisner
Especially in the case of --enable-split-usr, several units will point to the wrong location for systemctl. Use @SYSTEMCTL@ which will always contain the proper path.
2012-04-04move imported udev into placeKay Sievers
2011-12-30journal: add unit files and shared library glueLennart Poettering
2011-08-30stdout-bridge: rename logger to stdout-syslog-bridge to make it more descriptiveLennart Poettering
2011-06-30logind: add service for per-user shared systemd daemonLennart Poettering
2011-06-21dbus: add dbus introspection extractionLennart Poettering
2011-06-21mechanisms: add mechanisms to change system locale and clockLennart Poettering
2011-06-14remote-fs.target: do not order after network.targetTom Gundersen
remote-fs.target is ordered after the {auto,}mount units. In case of automount we do not want to wait for the network to come up before proceeding. In case of a regular mount unit, the unit will be ordered after network.target so the behavior is unchanged. This speeds up boot quite a bit for me when having some services needing NetworkManager-wait-online.service, and having my home partition on nfs under an automountpoint.
2011-04-16hostnamed: introduce systemd-hostnamedLennart Poettering
http://www.freedesktop.org/wiki/Software/systemd/hostnamed
2011-04-04binfmt: add binfmt tool to set up binfmt_misc at bootLennart Poettering
2011-03-18units: we don't need to generate syslog.target with sed anymoreLennart Poettering
2011-03-18units: we no longer need m4 to build graphical.target or multi-user.taregtLennart Poettering