summaryrefslogtreecommitdiff
path: root/units/.gitignore
AgeCommit message (Collapse)Author
2015-10-15units: .gitignore: units - ignore tmp.mountTom Gundersen
This is a follow-up to 409c2a13fd656.
2015-10-01rfkill: rework and make it listen on /dev/rfkillLennart Poettering
With this rework we introduce systemd-rfkill.service as singleton that is activated via systemd-rfkill.socket that listens on /dev/rfkill. That way, we get notified each time a new rfkill device shows up or changes state, in which case we restore and save its current setting to disk. This is nicer than the previous logic, as this means we save/restore state even of rfkill devices that are around only intermittently, and save/restore the state even if the system is shutdown abruptly instead of cleanly. This implements what I suggested in #1019 and obsoletes it.
2015-09-21containers: systemd exits with non-zero codeAlban Crequy
When a systemd service running in a container exits with a non-zero code, it can be useful to terminate the container immediately and get the exit code back to the host, when systemd-nspawn returns. This was not possible to do. This patch adds the following to make it possible: - Add a read-only "ExitCode" property on PID 1's "Manager" bus object. By default, it is 0 so the behaviour stays the same as previously. - Add a method "SetExitCode" on the same object. The method fails when called on baremetal: it is only allowed in containers or in user session. - Add support in systemctl to call "systemctl exit 42". It reuses the existing code for user session. - Add exit.target and systemd-exit.service to the system instance. - Change main() to actually call systemd-shutdown to exit() with the correct value. - Add verb 'exit' in systemd-shutdown with parameter --exit-code - Update systemctl manpage. I used the following to test it: | $ sudo rkt --debug --insecure-skip-verify run \ | --mds-register=false --local docker://busybox \ | --exec=/bin/chroot -- /proc/1/root \ | systemctl --force exit 42 | ... | Container rkt-895a0cba-5c66-4fa5-831c-e3f8ddc5810d failed with error code 42. | $ echo $? | 42 Fixes https://github.com/systemd/systemd/issues/1290
2015-05-15units: make networkd pull in its own .busname unitTom Gundersen
The daemon requires the busname unit to operate (on kdbus systems), since it contains the policy that allows it to acquire its service name. This fixes https://bugs.freedesktop.org/show_bug.cgi?id=90287
2015-04-28fsck: remove fsckd again, but keep the door open for external replacementLennart Poettering
For a longer discussion see this: http://lists.freedesktop.org/archives/systemd-devel/2015-April/030175.html This introduces /run/systemd/fsck.progress as a simply AF_UNIX/SOCK_STREAM socket. If it exists and is connectable we'll connect fsck's -c switch with it. If external programs want to get progress data they should hence listen on this socket and will get all they need via that socket. To get information about the connecting fsck client they should use SO_PEERCRED. Unless /run/systemd/fsck.progress is around and connectable this change reverts back to v219 behaviour where we'd forward fsck output to /dev/console on our own.
2015-04-24shutdownd: kill the old implementationDaniel Mack
Not that all functionality has been ported over to logind, the old implementation can be removed. There goes one of the oldest parts of the systemd code base.
2015-03-19resolved: Do not add .busname dependencies, when compiling without kdbus.Dimitri John Ledkov
2015-02-18Add fsckd service and socket, retarget systemd-fsckDidier Roche
systemd-fsckd can be socket-activated by systemd-fsck process. Reflect that in the different unit files.
2015-01-22import: introduce new mini-daemon systemd-importd, and make machinectl a ↵Lennart Poettering
client to it The old "systemd-import" binary is now an internal tool. We still use it as asynchronous backend for systemd-importd. Since the import tool might require some IO and CPU resources (due to qcow2 explosion, and decompression), and because we might want to run it with more minimal priviliges we still keep it around as the worker binary to execute as child process of importd. machinectl now has verbs for pulling down images, cancelling them and listing them.
2015-01-17bus-proxy: turn into multi-threaded daemonDavid Herrmann
Instead of using Accept=true and running one proxy for each connection, we now run one proxy-daemon with a thread per connection. This will enable us to share resources like policies in the future.
2014-12-18systemd-hwdb: introduce new toolTom Gundersen
This pulls out the hwdb managment from udevadm into an independent tool. The old code is left in place for backwards compatibility, and easy of testing, but all documentation is dropped to encourage use of the new tool instead.
2014-12-10gitignore: hide some more filesLennart Poettering
2014-12-04gitignore: ignore generated systemd-bootchart.serviceWaLyong Cho
2014-12-03machine-id-commit: add unit fileDidier Roche
The unit file only active the machine-id-commit helper if /etc is mounted writable and /etc/machine-id is an independant mount point (should be a tmpfs).
2014-09-25readahead: wipe out readaheadDaniel Buch
2014-08-31units: m4 is not needed for rescue.serviceZbigniew Jędrzejewski-Szmek
2014-08-26hibernate-resume: add a tool to write a device node's major:minor to ↵Ivan Shapovalov
/sys/power/resume. This can be used to initiate a resume from hibernation by path to a swap device containing the hibernation image. The respective templated unit is also added. It is instantiated using path to the desired resume device.
2014-07-15journal-remote: add units and read certs from default locationsZbigniew Jędrzejewski-Szmek
2014-07-07firstboot: add new component to query basic system settings on first boot, ↵Lennart Poettering
or when creating OS images offline A new tool "systemd-firstboot" can be used either interactively on boot, where it will query basic locale, timezone, hostname, root password information and set it. Or it can be used non-interactively from the command line when prepareing disk images for booting. When used non-inertactively the tool can either copy settings from the host, or take settings on the command line. $ systemd-firstboot --root=/path/to/my/new/root --copy-locale --copy-root-password --hostname=waldi The tool will be automatically invoked (interactively) now on first boot if /etc is found unpopulated. This also creates the infrastructure for generators to be notified via an environment variable whether they are running on the first boot, or not.
2014-06-13units: rebuild /etc/passwd, the udev hwdb and the journal catalog files on bootLennart Poettering
Only when necessary of course, nicely guarded with the new ConditionNeedsUpdate= condition we added.
2014-06-13update-done: add minimal tool to manage system updates for /etc and /var, if ↵Lennart Poettering
/usr has changed In order to support offline updates to /usr, we need to be able to run certain tasks on next boot-up to bring /etc and /var in line with the updated /usr. Hence, let's devise a mechanism how we can detect whether /etc or /var are not up-to-date with /usr anymore: we keep "touch files" in /etc/.updated and /var/.updated that are mtime-compared with /usr. This means: Whenever the vendor OS tree in /usr is updated, and any services that shall be executed at next boot shall be triggered, it is sufficient to update the mtime of /usr itself. At next boot, if /etc/.updated and/or /var/.updated is older than than /usr (or missing), we know we have to run the update tools once. After that is completed we need to update the mtime of these files to the one of /usr, to keep track that we made the necessary updates, and won't repeat them on next reboot. A subsequent commit adds a new ConditionNeedsUpdate= condition that allows checking on boot whether /etc or /var are outdated and need updating. This is an early step to allow booting up with an empty /etc, with automatic rebuilding of the necessary cache files or user databases therein, as well as supporting later updates of /usr that then propagate to /etc and /var again.
2014-05-19resolved: add daemon to manage resolv.confTom Gundersen
Also remove the equivalent functionality from networkd.
2014-04-29timesyncd: add unit and man pageKay Sievers
2014-04-24networkd-wait-online: improve interoptability and enable by defaultTom Gundersen
To make sure we don't delay boot on systems where (some) network links are managed by someone else we don't block if something else has successfully brought up a link. We will still block until all links we are aware of that are managed by networkd have been configured, but if no such links exist, and someone else have configured a link sufficiently that it has a carrier, it may be that the link is ready so we should no longer block. Note that in all likelyhood the link is not ready (no addresses/routes configured), so whatever network managment daemon configured it should provide a similar wait-online service to block network-online.target until it is ready. The aim is to block as long as we know networking is not fully configured, but no longer. This will allow systemd-networkd-wait-online.service to be enabled on any system, even if we don't know whether networkd is the main/only network manager. Even in the case networking is fully configured by networkd, the default behavior may not be sufficient: if two links need to be configured, but the first is fully configured before the second one appears we will assume the network is up. To work around that, we allow specifying specific devices to wait for before considering the network up. This unit is enabled by default, just like systemd-networkd, but will only be pulled in if anyone pulls in network-online.target.
2014-04-22remove bus-driverd, the interface is now handled natively by bus-proxydKay Sievers
2014-01-08pam_systemd: export DBUS_SESSION_BUS_ADDRESSKay Sievers
2013-12-28gitignore: add back user@.serviceMarc-Antoine Perennou
2013-12-27build-sys: fix generation of user@.serviceZbigniew Jędrzejewski-Szmek
2013-12-17bus: install unit files for new driver serviceLennart Poettering
2013-12-13bus: install systemd-bus-proxyd unit files for compatibility with dbus1Lennart Poettering
2013-11-09networkd: add a basic network daemonTom Gundersen
This daemon listens for and configures network devices tagged with 'systemd-networkd'. By default, no devices are tagged so this daemon can safely run in parallel with existing network daemons/scripts. Networks are configured in /etc/systemd/network/*.network. The first .network file that matches a given link is applied. The matching logic is similar to the one for .link files, but additionally supports matching on interface name. The mid-term aim is to provide an alternative to ad-hoc scripts currently used in initrd's and for wired setups that don't change much (e.g., as seen on servers/and some embedded systems). Currently, static addresses and a gateway can be configured. Example .network file: [Match] Name=wlp2s0 [Network] Description=My Network Gateway=192.168.1.1 Address=192.168.1.23/24 Address=fe80::9aee:94ff:fe3f:c618/64
2013-10-31machinectl: add new command to spawn a getty inside a containerLennart Poettering
2013-10-14rfkill: add new rfkill tool to save/restore rfkill state across rebootsLennart Poettering
This works analogous to the existing backlight and random seed services
2013-08-14backlight: add minimal tool to save/restore screen brightness across rebootsLennart Poettering
As many laptops don't save/restore screen brightness across reboots, let's do this in systemd with a minimal tool, that restores the brightness as early as possible, and saves it as late as possible. This will cover consoles and graphical logins, but graphical desktops should do their own per-user stuff probably. This only touches firmware brightness controls for now.
2013-07-08static-nodes: move creation of static nodes from udevd to tmpfilesTom Gundersen
As of kmod v14, it is possible to export the static node information from /lib/modules/`uname -r`/modules.devname in tmpfiles.d(5) format. Use this functionality to let systemd-tmpfilesd create the static device nodes at boot, and drop the functionality from systemd-udevd. As an effect of this we can move from systemd-udevd to systemd-tmpfiles-setup-dev: * the conditional CAP_MKNOD (replaced by checking if /sys is mounted rw) * ordering before local-fs-pre.target (see 89d09e1b5c65a2d97840f682e0932c8bb499f166)
2013-07-02machined: split out machine registration stuff from logindLennart Poettering
Embedded folks don't need the machine registration stuff, hence it's nice to make this optional. Also, I'd expect that machinectl will grow additional commands quickly, for example to join existing containers and suchlike, hence it's better keeping that separate from loginctl.
2013-05-16utmp: turn systemd-update-utmp-shutdown.service into a normal runtime serviceLennart Poettering
With this change systemd-update-utmp-shutdown.service is replaced by systemd-update-utmp.service which is started at boot and stays around until shutdown. This allows us to properly order the unit against both /var/log and auditd. https://bugzilla.redhat.com/show_bug.cgi?id=853104 https://bugs.freedesktop.org/show_bug.cgi?id=64365
2013-05-15units: rework systemd-random-seed-{load,save}.service to be a single serviceLennart Poettering
That way ordering it with MountsRequiredFor= works properly, as this no longer results in mount units start requests to be added to the shutdown transaction that conflict with stop requests for the same unit.
2013-04-30units: add an easy-to-use unit template file systemd-nspawn@.service for ↵Lennart Poettering
running containers as system services
2013-04-22units: rename systemd-static-nodes -> systemd-tmpfiles-setup-devTom Gundersen
This is really just a special case of systemd-tmpfiles-setup, moreover it could easily create more than static nodes.
2013-04-12bus: rename KDBUS_CMD_FNAME_POLICY_NONE -> KDBUS_CMD_FNAME_POLICY_OPENKay Sievers
2013-03-11Update .gitignoreMichael Biebl
for the changes in 7b40ce553f0ec9487077e53f5bdc46580025901c
2013-01-29build-sys: keep intermediate filesZbigniew Jędrzejewski-Szmek
Sometimes it is useful to look at them, and they don't take up any significant amount of space. Keeping them also avoids the message about files being removed at the end of make run.
2013-01-04build-sys: make rc-local support part of SYSV compatLennart Poettering
This also drops automatic selection of the rc local scripts based on the local distro. Distributions now should specify the paths of the rc-local and halt-local scripts on the configure command line.
2012-10-28logind: support for hybrid sleep (i.e. suspend+hibernate at the same time)Lennart Poettering
2012-09-28journal: add minimal journal gateway daemon based on GNU libmicrohttpdLennart Poettering
This minimal HTTP server can serve journal data via HTTP. Its primary purpose is synchronization of journal data across the network. It serves journal data in three formats: text/plain: the text format known from /var/log/messages application/json: the journal entries formatted as JSON application/vnd.fdo.journal: the binary export format of the journal The HTTP server also serves a small HTML5 app that makes use of the JSON serialization to present the journal data to the user. Examples: This downloads the journal in text format: # systemctl start systemd-journal-gatewayd.service # wget http://localhost:19531/entries Same for JSON: # curl -H"Accept: application/json" http://localhost:19531/entries Access via web browser: $ firefox http://localhost:19531/
2012-09-11build-sys: perform autodetection of quota-tools binariesDave Reisner
Use AC_PATH_PROG to try and locate the quotaon and quotacheck binaries, falling back on hardcoded defaults when they can't be found.
2012-07-11journal: replace implicit flushing of journal by explicit oneLennart Poettering
The old automatism that the flushing of the journal from /run to /var was triggered by the appearance of /var/log/journal is broken if that directory is mounted from another host and hence always available to be useful as mount point. To avoid probelsm with this, introduce a new unit that is explicitly orderer after all mounte files systems and triggers the flushing.
2012-07-02units: Rename systemd-udev.service to systemd-udevd.serviceColin Guthrie
This naming convention is more inline with other systemd daemon unit names (systemd-logind.service, systemd-localed.service etc) The companion .socket units have also been renamed, however the -trigger and -settle units keep their current name as these are not directly related to daemon process itself.
2012-07-02units: rename systemd-debug-shell.service to debug-shell.serviceLennart Poettering
The systemd- prefix for services should be reserved only for services that invoke our own code rather than generic, external code.