summaryrefslogtreecommitdiff
path: root/units
AgeCommit message (Collapse)Author
2011-05-18exec: hangup/reset/deallocate VTs in gettysLennart Poettering
Explicitly disconnect all clients from a VT when a getty starts/finishes (requires TIOCVHANGUP, available in 2.6.29). Explicitly deallocate getty VTs in order to flush scrollback buffer. Explicitly reset terminals to a defined state before spawning getty.
2011-05-09units: Enable plymouth for FrugalwareMiklos Vajna
2011-05-02units: enable automount units only if the kernel supports themLennart Poettering
2011-04-30binfmt, modules-load, sysctl, tmpfiles: add missing ConditionDirectoryNotEmpty=Kay Sievers
2011-04-30plymouth: introduce plymouth.enable=0 kernel command line switchLennart Poettering
2011-04-20units: set capability bounding set for syslog servicesLennart Poettering
2011-04-20MeeGo supportChris E Ferron
This commit consists of the initial work to include MeeGo as a ported distribution for systemd. The majority of the changes are small configuration additions to auto tools, so that MeeGo is identified as a valid distribution option. Some small deviations will be noticed between the configuration of MeeGo and other distributions. As MeeGo is a distribution striving for compliancy to support its near embedded attributes and target users, there is less user configuration options available by default. Most services will be enabled by systemd as part of the distribution requirements, and as such most links and service files will be pre-setup for the MeeGo distribution. As much of this is going to be done within the MeeGo distribution packaging this is still noteworthy to mention, as it explains why in systemd you will observe configuration differences where the MeeGo distribution removes all links in the pkgsysconfdir for instance. MeeGo will be user configurable if there is desire, but most services will be enabled by the distribution as designated by the MeeGo compliancy standards. Other changes are in source to add such areas as meego-release defined in utils, and hostname in hostname-setup, defining vconsole-setup, localizations and rescue additions as needed. As this is all ground work, MeeGo will continue to strive for complete compatibility.
2011-04-20fsck: don't fsck against basic.target in order to properly allow automount /homeLennart Poettering
2011-04-19hostnamed: drop all caps but CAP_SYS_ADMINLennart Poettering
2011-04-16hostnamed: introduce systemd-hostnamedLennart Poettering
http://www.freedesktop.org/wiki/Software/systemd/hostnamed
2011-04-16units: wording fixLennart Poettering
2011-04-16units: order quotacheck after remount-rootfsLennart Poettering
2011-04-16manager: introduce IgnoreOnIsolate flag so that we can keep systemd-logger ↵Lennart Poettering
around when isolating
2011-04-16units: never pull in sysinit from utmp, so that we can shutdown from ↵Lennart Poettering
emergency mode without pulling in sysinit
2011-04-16units: require syslog.socket from the logger because we simply fail if we ↵Lennart Poettering
don't have it
2011-04-16logger: adjust socket description to match serviceLennart Poettering
2011-04-16units: set stdout of kmsg syslogd to /dev/nullLennart Poettering
2011-04-16units: add --no-block when starting normal service after shell exitedLennart Poettering
2011-04-13units: isolate emergency.target instead of emergency.service when we fail to ↵Lennart Poettering
mount all file systems
2011-04-10local-fs: invoke emergency.service mounting at boot failsLennart Poettering
2011-04-10path: optionally, create watched directories in .path unitsLennart Poettering
2011-04-06units: rename rtc-set.target to time-sync.target and pull it in by ↵Lennart Poettering
hwclock-load.service On request of Miroslav Lichvar, rename rtc-set.target to time-sync.target since usually the RTC chip isn't involved at all in NTP syncs. Also, pull it in by hwclock-load.service.
2011-04-05units: call the logger a bridge tooLennart Poettering
2011-04-04logger: name socket like serviceLennart Poettering
2011-04-04units: improve logger descriptionsLennart Poettering
2011-04-04binfmt: add binfmt tool to set up binfmt_misc at bootLennart Poettering
2011-04-03initctl: /dev/initctl is a named pipe, not a socketLennart Poettering
2011-03-31plymouth: use PID file to detect whether ply is runningLennart Poettering
2011-03-30plymouth: don't explicitly enable status message when plymouth is upsystemd/v21Lennart Poettering
https://bugzilla.redhat.com/show_bug.cgi?id=676302 systemd now watches /run/initramfs/plymouth and generates messages exactly when that file exists. Hence we don't need the sending of the signals anymore.
2011-03-29exec: drop process group kill mode since it has little use and confuses the userLennart Poettering
2011-03-29man: really fix all LC_MESSAGE to LC_MESSAGESLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=35534
2011-03-29plymouth: Remove the calls to plymouth messageWilliam Jon McCann
* messages aren't translated * console text is ugly * they are jargonny * they really aren't needed https://bugs.freedesktop.org/show_bug.cgi?id=35711
2011-03-28use /run instead of /dev/.runKay Sievers
Instead of the /dev/.run trick we have currently implemented, we decided to move the early-boot runtime dir to /run. An existing /var/run directory is bind-mounted to /run. If /var/run is already a symlink, no action is taken. An existing /var/lock directory is bind-mounted to /run/lock. If /var/lock is already a symlink, no action is taken. To implement the directory vs. symlink logic, we have a: ConditionPathIsDirectory= now, which is used in the mount units. Skipped mount unit in case of symlink: $ systemctl status var-run.mount var-run.mount - Runtime Directory Loaded: loaded (/lib/systemd/system/var-run.mount) Active: inactive (dead) start condition failed at Fri, 25 Mar 2011 04:51:41 +0100; 6min ago Where: /var/run What: /run CGroup: name=systemd:/system/var-run.mount The systemd rpm needs to make sure to add something like: %pre mkdir -p -m0755 /run >/dev/null 2>&1 || : or it needs to be added to filesystem.rpm. Udev -git already uses /run if that exists, and is writable at bootup. Otherwise it falls back to the current /dev/.udev. Dracut and plymouth need to be adopted to switch from /dev/.run to run too. Cheers, Kay
2011-03-18units: replace Names=dm.service with symlink for mandriva prefdmAndrey Borzenkov
2011-03-18mount: pull in quota services from local mountpoints with usr/grpquota optionsAndrey Borzenkov
2011-03-18units: pull in syslog.target from syslog.socketLennart Poettering
2011-03-18units: don't ever pull in SysV targets from other SysV targetsLennart Poettering
2011-03-18units: document that some targets exists only for compat with SysVLennart Poettering
2011-03-18units: we don't need to generate syslog.target with sed anymoreLennart Poettering
2011-03-18units: we no longer need m4 to build graphical.target or multi-user.taregtLennart Poettering
2011-03-18units: on mandriva/fedora create single.service alias via symlink, not Names=Lennart Poettering
2011-03-18units: get rid of runlevel Names=, the symlinks in /lib/systemd/system are ↵Lennart Poettering
much more useful
2011-03-18units: get rid of empty units/suse/ subdirLennart Poettering
2011-03-18syslog: rework syslog detection so that we need no compile-time option what ↵Lennart Poettering
the name of the syslog implementation is
2011-03-18special: get rid of dbus.targetLennart Poettering
2011-03-16Add Frugalware display-manager serviceMiklos Vajna
2011-03-14units: add console-shell.service which can be used insted of the gettys to ↵Lennart Poettering
get a shell on /dev/console
2011-03-14core: move abstract namespace sockets to /dev/.runLennart Poettering
Now that we have /dev/.run there's no need to use abstract namespace sockets. So, let's move things to /dev/.run, to make things more easily discoverable and improve compat with chroot() and fs namespacing.
2011-03-11units: move the last flag files to /dev/.runLennart Poettering
2011-03-09dev: use /dev/.run/systemd as runtime directory, instead of /dev/.systemdLennart Poettering
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-04 22:32:18 +0000