| Age | Commit message (Collapse) | Author |
|---|
|
|
|
As suggested by Kay, it is better to describe what is done,
not what might happen.
|
|
|
|
|
|
|
|
Various operations done by systemd-tmpfiles may only be safely done at
boot (e.g. removal of X lockfiles in /tmp, creation of /run/nologin).
Other operations may be done at any point in time (e.g. setting the
ownership on /{run,var}/log/journal). This distinction is largely
orthogonal to the type of operation.
A new switch --unsafe is added, and operations which should only be
executed during bootup are marked with an exclamation mark in the
configuration files. systemd-tmpfiles.service is modified to use this
switch, and guards are added so it is hard to re-start it by mistake.
If we install a new version of systemd, we actually want to enforce
some changes to tmpfiles configuration immediately. This should now be
possible to do safely, so distribution packages can be modified to
execute the "safe" subset at package installation time.
/run/nologin creation is split out into a separate service, to make it
easy to override.
https://bugzilla.redhat.com/show_bug.cgi?id=1043212
https://bugzilla.redhat.com/show_bug.cgi?id=1045849
|
|
Condition for /lib (necessary for split /usr) was missing from the unit.
Some changes which were done in tmpfiles.d(5) were not carried over to
systemd-tmpfiles(1).
Also use markup where possible.
|
|
then
|
|
|
|
|
|
This way we can make use of our logic to automatically determine an
appropriate TERM for a specific tty.
|
|
This has the effect that systemd-networkd won't run in containers
without network namespacing wher CAP_NET_ADMIN is (usually) not
available. It will still run in containers with network namespacing on
(where CAP_NET_ADMIN is usually avilable).
We might remove this condition check again if networkd provides services
to apps that also are useful in containers lacking network namespacing,
however, as long as it doesn't it should be handled like udevd and be
excluded in such containers.
|
|
|
|
|
|
|
|
|
|
We don't run the collector in the container either, hence we don't need
to stop it either.
|
|
|
|
Adds a new call sd_event_set_watchdog() that can be used to hook up the
event loop with the watchdog supervision logic of systemd. If enabled
and $WATCHDOG_USEC is set the event loop will ping the invoking systemd
daemon right after coming back from epoll_wait() but not more often than
$WATCHDOG_USEC/4. The epoll_wait() will sleep no longer than
$WATCHDOG_USEC/4*3, to make sure the service manager is called in time.
This means that setting WatchdogSec= in a .service file and calling
sd_event_set_watchdog() in your daemon is enough to hook it up with the
watchdog logic.
|
|
|
|
|
|
setting and make use of it where applicable
|
|
Also start earlier during boot.
|
|
And make it default to 1min
|
|
|
|
This daemon listens for and configures network devices tagged with
'systemd-networkd'. By default, no devices are tagged so this daemon
can safely run in parallel with existing network daemons/scripts.
Networks are configured in /etc/systemd/network/*.network. The first .network
file that matches a given link is applied. The matching logic is similar to
the one for .link files, but additionally supports matching on interface name.
The mid-term aim is to provide an alternative to ad-hoc scripts currently used
in initrd's and for wired setups that don't change much (e.g., as seen on
servers/and some embedded systems).
Currently, static addresses and a gateway can be configured.
Example .network file:
[Match]
Name=wlp2s0
[Network]
Description=My Network
Gateway=192.168.1.1
Address=192.168.1.23/24
Address=fe80::9aee:94ff:fe3f:c618/64
|
|
|
|
|
|
instead of using FsckPassNo
[tomegun:
* order all fsck instances after fsck-root
* check for OOM
* added notes in the manpages]
|
|
This is no longer necessary with kmod-15. Bump the requirement.
|
|
This works analogous to the existing backlight and random seed services
|
|
In e6dca81 $SHELL was added to user@.service. Let's
instead provide it to all units which have a user.
|
|
This should have been part of ef5bfcf668e6029faa78534dfe.
|
|
DRM Master access requires CAP_SYS_ADMIN, yay! Add it to the capability
bounding set for systemd-logind. As CAP_SYS_ADMIN actually allows a huge
set of actions, this mostly renders the restriction-set useless. Anyway,
patches are already pending to reduce the restriction on the kernel side.
But these won't really make it into any stable-release so for now we're
stuck with CAP_SYS_ADMIN.
|
|
With the advent of systemd --user sessions, it's become very interesting to spawn X as a user unit, as well as accompanying processes that may have previously been in a .xinitrc/.xsession, or even just to replace a collection of XDG/GDM/KDM/etc session files with independent systemd --user units. The simplest case here would be to login on a tty, with the traditional /usr/sbin/login "login manager".
However, systemd --user (spawned by user@.service) is at the top level of the slice for the user, and does not inherit any environment variables from the login process. Given the number of common applications which rely on SHELL being set in the environment, it seems like the cleanest way to provide this variable is to set it to %s in the user@.service.
Ideally in the long-term, applications which rely on SHELL being set should be fixed to just grab it from getpwnam() or similar, but until that becomes more common, I propose this simple change to make user sessions a little bit nicer out of the box.
|
|
|
|
This service was merged with systemd-random-seed-save.service in
c35b956d34bbb8bb208e49e45de2c103ca11911c.
|
|
ControlGroup= is obsolete, so let's drop it from the default nspawn unit
file.
|
|
systemd-logind will start user@.service. user@.service unit uses
PAM with service name 'systemd-user' to perform account and session
managment tasks. Previously, the name was 'systemd-shared', it is
now changed to 'systemd-user'.
Most PAM installations use one common setup for different callers.
Based on a quick poll, distributions fall into two camps: those that
have system-auth (Redhat, Fedora, CentOS, Arch, Gentoo, Mageia,
Mandriva), and those that have common-auth (Debian, Ubuntu, OpenSUSE).
Distributions that have system-auth have just one configuration file
that contains auth, password, account, and session blocks, and
distributions that have common-auth also have common-session,
common-password, and common-account. It is thus impossible to use one
configuration file which would work for everybody. systemd-user now
refers to system-auth, because it seems that the approach with one
file is more popular and also easier, so let's follow that.
|
|
This means we can use default dependencies on mount units without having to get them automatically
ordered before the filesystem targets.
Reported-by: Thomas Baechler <thomas@archlinux.org>
|
|
Fixes errors seen when booting VMs on QEMU like
systemd[1]: kmod-static-nodes.service: main process exited, code=exited, status=203/EXEC
systemd[1]: Failed to start Create list of required static device nodes for the current kernel.
systemd[1]: Unit kmod-static-nodes.service entered failed state.
Make sure that mknod capability is available
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=998122.
Note: upstream kmod has a patch [1] to exit with a warning if
modules.devname is missing. We could use new %v specifier to make this
service conditional on the existence of this file, but this could
mask a kernel installation error, hence we should let kmod run
even if the file doesn't exist.
[1] http://git.kernel.org/cgit/utils/kernel/kmod/kmod.git/commit/?id=ae17710117
|
|
|
|
Without this, fsck would be re-run if any other service which pulls
in a target requiring one of the mounts was started after fsck was done
but before the initial transaction was done.
https://bugs.freedesktop.org/show_bug.cgi?id=66784
|
|
|
|
|
|
This makes the description string of the backlight service a bit nicer.
|
|
As many laptops don't save/restore screen brightness across reboots,
let's do this in systemd with a minimal tool, that restores the
brightness as early as possible, and saves it as late as possible. This
will cover consoles and graphical logins, but graphical desktops should
do their own per-user stuff probably.
This only touches firmware brightness controls for now.
|
|
This is useful to fake session ends for processes like shells.
|
|
Fixes Arch Linux bug: https://bugs.archlinux.org/task/36259
|
