| Age | Commit message (Collapse) | Author |
|---|
|
When the service is run in the initramfs, it is possible for it to get started
and not be fast enough to exit before the root switch happens. It is started
multiple times (depending on the consoles being detected), and runs
asynchronously, so this is quite likely. It'll then get killed by killall(),
and systemd will consider the service failed. To avoid all this, just wait
for the service to terminate on it's own.
Before=initrd-switch-root.target should be good for the initramfs, and
Before=shutdown.tuarget should be good for the real system, although it's
unlikely to make any difference there.
|
|
The service already has DefaultDeps disabled, so systemd should not try to stop
it. And if it *does* get stopped, we don't want the zombie process around.
KillMode=none does not change anything in the killall() phase, and we already
use argv[0][0] = '@' to protect against that anyway. KillMode=none should not
be useful in normal operation, so let's leave it out.
|
|
|
|
The service is supposed to regenerate the catalog index whenever /usr is
updated, but /var is not. Hence the ConditionNeedsUpdate= line should
actually reference /var, as that's where the index file is located.
|
|
This adds support for a new kernel command line option "systemd.volatile=" that
provides the same functionality that systemd-nspawn's --volatile= switch
provides, but for host systems (i.e. systems booting with a kernel).
It takes the same parameter and has the same effect.
In order to implement systemd.volatile=yes a new service
systemd-volatile-root.service is introduced that only runs in the initrd and
rearranges the root directory as needed to become a tmpfs instance. Note that
systemd.volatile=state is implemented different: it simply generates a
var.mount unit file that is part of the normal boot and has no effect on the
initrd execution.
The way this is implemented ensures that other explicit configuration for /var
can always override the effect of these options. Specifically, the var.mount
unit is generated in the "late" generator directory, so that it only is in
effect if nothing else overrides it.
|
|
This parameter has no effect on switch root hence we shouldn't specify it.
|
|
Note: the name is "system-update-cleanup.service" rather than
"system-update-done.service", because it should not run normally, and also
because there's already "systemd-update-done.service", and having them named
so similarly would be confusing.
In https://bugzilla.redhat.com/show_bug.cgi?id=1395686 the system repeatedly
entered system-update.target on boot. Because of a packaging issue, the tool
that created the /system-update symlink could be installed without the service
unit that was supposed to perform the upgrade (and remove the symlink). In
fact, if there are no units in system-update.target, and /system-update symlink
is created, systemd always "hangs" in system-update.target. This is confusing
for users, because there's no feedback what is happening, and fixing this
requires starting an emergency shell somehow, and also knowing that the symlink
must be removed. We should be more resilient in this case, and remove the
symlink automatically ourselves, if there are no upgrade service to handle it.
This adds a service which is started after system-update.target is reached and
the symlink still exists. It nukes the symlink and reboots the machine. It
should subsequently boot into the default default.target.
This is a more general fix for
https://bugzilla.redhat.com/show_bug.cgi?id=1395686 (the packaging issue was
already fixed).
|
|
- use "service" instead of "script", because various offline updaters that we have
aren't really scripts, e.g. dnf-plugin-system-upgrade, packagekit-offline-update,
fwupd-offline-update.
- strongly recommend After=sysinit.target, Wants=sysinit.target
- clarify a bit what should happen when multiple update services are started
- replace links to the wiki with refs to the man page that replaced it.
|
|
This is a different way to implement the fix proposed by commit
a4021390fef27f4136497328f suggested by Lennart Poettering.
In this patch we instruct PID1 to not kill "systemctl switch-root" command
started by initrd-switch-root service using the "argv[0][0]='@'" trick.
See: https://www.freedesktop.org/wiki/Software/systemd/RootStorageDaemons/ for
more details.
We had to backup argv[0] because argv is modified by dispatch_verb().
|
|
networkd: allow networkd to start in early boot
|
|
With the previous improvements, networkd.service's "After=dbus.service" can now
be dropped. That ordering effectively forced networkd.service to run in late
boot only (dbus.service was rejected to run in early boot in
https://bugs.freedesktop.org/show_bug.cgi?id=98254).
Fixes #4504
|
|
(#4713)
Since commit 1f0958f640b8717, systemd considers SIGTERM for short-running
services (aka Type=oneshot) as a failure.
This can be an issue with initrd-switch-root.service as the command run by this
service (in order to switch to the new rootfs) may still be running when
systemd does the switch.
However PID1 sends SIGTERM to all remaining processes right before
switching and initrd-switch-root.service can be one of those.
After systemd is reexecuted and its previous state is deserialized, systemd
notices that initrd-switch-root.service was killed with SIGTERM and considers
this as a failure which leads to the emergency shell.
To prevent this, this patch teaches systemd to consider a SIGTERM exit as a
clean one for this service.
It also removes "KillMode=none" since this is pretty useless as the service is
never stopped by systemd but it either exits normally or it's killed by a
SIGTERM as described previously.
|
|
The mount fails, even though CAP_SYS_ADMIN is granted.
Only file systems with FU_USERNS_MOUNT in .fs_flags may be mounted in userns,
and the patch to add that fusectl was rejected [1]. It would be nice if we
could check if the kernel has FU_USERNS_MOUNT for a given fs type, since this
could change over time, but this information doesn't seem to be exported.
So let's just skip this mount in userns to avoid an error during boot.
[1] https://patchwork.kernel.org/patch/2828269/
|
|
detect-virt: add --private-users switch to check if a userns is active; add Condition=private-users
|
|
The mount fails, even though CAP_SYS_ADMIN is granted.
|
|
Since this unit is synthesized anyway there's no point in actually shipping it
on disk. This also has the benefit that "cd /usr/lib/systemd/system ; ls *"
won't be confused by the leading dash of the file name anymore.
|
|
This simply changes this line:
ConditionPathIsReadWrite=/proc/sys/
to this:
ConditionPathIsReadWrite=/proc/sys/net/
The background for this is that the latter is namespaced through network
namespacing usually and hence frequently set as writable in containers, even
though the former is kept read-only. If /proc/sys is read-only but
/proc/sys/net is writable we should run the sysctl service, as useful settings
may be made in this case.
Fixes: #4370
|
|
By default all user and all system services get stop timeouts for 90s. This is
problematic as the user manager of course is run as system service. Thus, if
the default time-out is hit for any user service, then it will also be hit for
user@.service as a whole, thus making the whole concept useless for user
services.
This patch extends the stop timeout to 120s for user@.service hence, so that
that the user service manager has ample time to process user services timing
out.
(The other option would have been to shorten the default user service timeout,
but I think a user service should get the same timeout by default as a system
service)
Fixes: #4206
|
|
To upload journal entries to a remote server, it is required that
the network is online.
|
|
`systemctl isolate initrd-switch-root.target` called by initrd-cleanup.service
kills initrd-cleanup.service itself. Then, initrd-cleanup.service failed and
system goes to emergency shell.
To prevent this problem, this commit adds `Wants=initrd-cleanup.service` to
initrd-switch-root.target.
fixes: #4343.
|
|
console-shell.service was supposed to be useful for normal clean boots
(i.e. multi-user.target or so), as a replacement for logind/getty@.service for
simpler use cases.
But due to the lack of documentation and sanity check one can easily be
confused and enable this service in // with getty@.service.
In this case we end up with both services sharing the same tty which ends up in
strange results.
Even worse, console-shell.service might be failing while getty@.service tries
to acquire the terminal which ends up in the system to poweroff since
console-shell.service uses:
"ExecStopPost=-/usr/bin/systemctl poweroff".
Another issue: this service doesn't work well if plymouth is also used since it
lets the splash screen program run and mess the tty (at least a "plymouth quit"
is missing).
So let's kill it for now.
|
|
(#4296)
The udev builtin command `net_setup_link` requires AF_INET and AF_INET6.
Fixes #4293.
|
|
Let's make this an excercise in dogfooding: let's turn on more security
features for all our long-running services.
Specifically:
- Turn on RestrictRealtime=yes for all of them
- Turn on ProtectKernelTunables=yes and ProtectControlGroups=yes for most of
them
- Turn on RestrictAddressFamilies= for all of them, but different sets of
address families for each
Also, always order settings in the unit files, that the various sandboxing
features are close together.
Add a couple of missing, older settings for a numbre of unit files.
Note that this change turns off AF_INET/AF_INET6 from udevd, thus effectively
turning of networking from udev rule commands. Since this might break stuff
(that is already broken I'd argue) this is documented in NEWS.
|
|
Fixes #3996
|
|
Mere presence of the socket in the filesystem makes
udev_queue_get_udev_is_active() return that udev is running. Note that,
udev on exit doesn't unlink control socket nor does systemd. Thus socket
stays around even when both daemon and socket are stopped. This causes
problems for cryptsetup because when it detects running udev it launches
synchronous operations that *really* require udev. This in turn may
cause blocking and subsequent timeout in systemd-cryptsetup on reboot
while machine is in a state that udev and its control socket units are
stopped, e.g. emergency mode.
Fixes #2477
|
|
Fix preset-all
|
|
This was causing preset-all --global to create symlinks:
$ systemctl preset-all --global --root=/var/tmp/inst1
Created symlink /var/tmp/inst1/etc/systemd/user/shutdown.target → /usr/lib/systemd/user/../system/shutdown.target.
Created symlink /var/tmp/inst1/etc/systemd/user/sockets.target → /usr/lib/systemd/user/../system/sockets.target.
Created symlink /var/tmp/inst1/etc/systemd/user/timers.target → /usr/lib/systemd/user/../system/timers.target.
Created symlink /var/tmp/inst1/etc/systemd/user/paths.target → /usr/lib/systemd/user/../system/paths.target.
Created symlink /var/tmp/inst1/etc/systemd/user/bluetooth.target → /usr/lib/systemd/user/../system/bluetooth.target.
Created symlink /var/tmp/inst1/etc/systemd/user/printer.target → /usr/lib/systemd/user/../system/printer.target.
Created symlink /var/tmp/inst1/etc/systemd/user/sound.target → /usr/lib/systemd/user/../system/sound.target.
Created symlink /var/tmp/inst1/etc/systemd/user/smartcard.target → /usr/lib/systemd/user/../system/smartcard.target.
Created symlink /var/tmp/inst1/etc/systemd/user/busnames.target → /usr/lib/systemd/user/../system/busnames.target.
It is better to create units in a state that completely matches the presets, i.e.
preset-all should do nothing when invoked immediately after installation.
I'm sure it was confusing to users too, suggesting that system and user units
may somehow alias each other.
|
|
Random numbers are provided by the host kernel, we don't need to do anything.
https://bugzilla.redhat.com/show_bug.cgi?id=1329124
|
|
This complements graphical-session.target for services which set up the
environment (e. g. dbus-update-activation-environment) and need to run before
the actual graphical session.
|
|
(#3850)
The password directory watch should get ordered before cryptsetup to make sure
that the password for unlocking the crypt device gets prompted.
|
|
vconsole-setup: updates & fixes V2
|
|
Udev rules cover all the necessary initializations.
As the service now is neither installed, nor installable - we can
remove explicit dependencies and RemainAfterExit=yes option.
|
|
This unit acts as a dynamic "alias" target for any concrete graphical user
session like gnome-session.target; these should declare
"BindsTo=graphical-session.target" so that both targets stop and start at the
same time.
This allows services that run in a particular graphical user session (e. g.
gnome-settings-daemon.service) to declare "PartOf=graphical-session.target"
without having to know or get updated for all/new session types. This will
ensure that stopping the graphical session will stop all services which are
associated to it.
|
|
If user isolates rescue target from multi-user or graphical target (or just
starts the service), IgnoreOnIsolate will cause issues with sulogin which is
directly started on current virtual console. This patch adds necessary
Conflicts= and Before= against rescue.service.
Note that this is not needed for emergency target, as implicit Requires= and
After= against sysinit.target is in effect for this service
(DefaultDependencies=yes).
|
|
|
|
Assorted fixes
|
|
https://github.com/systemd/systemd/pull/3685 introduced
/run/systemd/inaccessible/{chr,blk} to map inacessible devices,
this patch allows systemd running inside a nspawn container to create
/run/systemd/inaccessible/{chr,blk}.
|
|
When a container scope is allocated via machined it gets 16K set already since
cf7d1a30e44bf380027a2e73f9bf13f423a33cc1. Make sure when a container is run as
system service it gets the same values.
|
|
machinectl: interpret options placed between "shell" verb and machine name
|
|
resolved: more fixes, among them "systemctl-resolve --status" to see DNS configuration in effect, and a local DNS stub listener on 127.0.0.53
|
|
udevd already limits its number of workers/children: the max number is actually
twice the number of CPUs the system is using.
(The limit can also be raised with udev.children-max= kernel command line
option BTW).
On some servers, this limit can easily exceed the maximum number of tasks that
systemd put on all services, which is 512 by default.
Since udevd has already its limitation logic, simply disable the static
limitation done by TasksMax.
|
|
This makes privilege escalation attacks harder by putting traps and exploits
into /tmp.
https://bugs.debian.org/826377
|
|
Specifically "machinectl shell" (or its OpenShell() bus call) is implemented by
entering the file system namespace of the container and opening a TTY there.
In order to enter the file system namespace, chroot() is required, which is
filtered by SystemCallFilter='s @mount group. Hence, let's make this work again
and drop @mount from the filter list.
|
|
Quoting @cgwalters:
Just uploading this as an RFC. Now I know reading the code that systemd says
`Welcome to $OS` as a generic thing, but my initial impression on seeing this
was that it was almost sarcastic =)
Let's say "You are in emergency mode" as a more neutral/less excited phrase.
This patch is based on #3556, but makes the same change for rescue mode.
|
|
In order to improve compatibility with local clients that speak DNS directly
(and do not use NSS or our bus API) listen locally on 127.0.0.53:53 and process
any queries made that way.
Note that resolved does not implement a full DNS server on this port, but
simply enough to allow normal, local clients to resolve RRs through resolved.
Specifically it does not implement queries without the RD bit set (these are
requests where recursive lookups are explicitly disabled), and neither queries
with DNSSEC DO set in combination with DNSSEC CD (i.e. DNSSEC lookups with
validation turned off). It also refuses zone transfers and obsolete RR types.
All lookups done this way will be rejected with a clean error code, so that the
client side can repeat the query with a reduced feature set.
The code will set the DNSSEC AD flag however, depending on whether the data
resolved has been validated (or comes from a local, trusted source).
Lookups made via this mechanisms are propagated to LLMNR and mDNS as necessary,
but this is only partially useful as DNS packets cannot carry IP scope data
(i.e. the ifindex), and hence link-local addresses returned cannot be used
properly (and given that LLMNR/mDNS are mostly about link-local communication
this is quite a limitation). Also, given that DNS tends to use IDNA for
non-ASCII names, while LLMNR/mDNS uses UTF-8 lookups cannot be mapped 1:1.
In general this should improve compatibility with clients bypassing NSS but
it is highly recommended for clients to instead use NSS or our native bus API.
This patch also beefs up the DnsStream logic, as it reuses the code for local
TCP listening. DnsStream now provides proper reference counting for its
objects.
In order to avoid feedback loops resolved will no silently ignore 127.0.0.53
specified as DNS server when reading configuration.
resolved listens on 127.0.0.53:53 instead of 127.0.0.1:53 in order to leave
the latter free for local, external DNS servers or forwarders.
This also changes the "etc.conf" tmpfiles snippet to create a symlink from
/etc/resolv.conf to /usr/lib/systemd/resolv.conf by default, thus making this
stub the default mode of operation if /etc is not populated.
|
|
Take away kernel keyring access, CPU emulation system calls and various debug
system calls from the various daemons we have.
|
|
Add a line
SystemCallFilter=~@clock @module @mount @obsolete @raw-io ptrace
for daemons shipped by systemd. As an exception, systemd-timesyncd
needs @clock system calls and systemd-localed is not privileged.
ptrace(2) is blocked to prevent seccomp escapes.
|
|
Secure daemons shipped by systemd by enabling MemoryDenyWriteExecute.
Closes: #3459
|
|
In the same vein as commit ac59f0c12c117b9bb5b7e17f33987b0107791239 which added
the --wait option to the emergency service, this patch makes sure that plymouth
has exited before entering into the rescue mode.
|
|
In order to support stateless systems that support offline /usr updates
properly, let's restore the ConditionNeesUpdate=/etc line that makes sure we
are run when /usr is updated and this update needs to be propagated to the
/etc/ld.so.conf file stored in /etc.
This reverts part of #2859, which snuck this change in, but really shouldn't
have.
|
