| Age | Commit message (Collapse) | Author |
|---|
|
logind needs access to /run/user/, udevd fails during early boot
with these settings
|
|
ReadOnlySystem= uses fs namespaces to mount /usr and /boot read-only for
a service.
ProtectedHome= uses fs namespaces to mount /home and /run/user
inaccessible or read-only for a service.
This patch also enables these settings for all our long-running services.
Together they should be good building block for a minimal service
sandbox, removing the ability for services to modify the operating
system or access the user's private data.
|
|
This service is not yet network facing, but let's prepare nonetheless.
Currently all caps are dropped, but some may need to be kept in the
future.
|
|
Rely on modules being built-in or autoloaded on-demand.
As networkd is a network facing service, we want to limits its capabilities,
as much as possible. Also, we may not have CAP_SYS_MODULE in a container,
and we want networkd to work the same there.
Module autoloading does not always work, but should be fixed by the kernel
patch f98f89a0104454f35a: 'net: tunnels - enable module autoloading', which
is currently in net-next and which people may consider backporting if they
want tunneling support without compiling in the modules.
Early adopters may also use a module-load.d snippet and order
systemd-modules-load.service before networkd to force the module
loading of tunneling modules.
This sholud fix the various build issues people have reported.
|
|
This allows us to run networkd mostly unpriviliged with the exception of
CAP_NET_* and CAP_SYS_MODULE. I'd really like to get rid of the latter
though...
|
|
The ptrace capability was only necessary to detect virtualizations
environments. Since we changed the logic to determine this to not
require priviliges, there's no need to carry the CAP_SYS_PTRACE
capability anymore.
|
|
This causes the container to shut down cleanly when the service is
stopped.
|
|
Create initial stamp file with compiled-in time to prevent bootups
with clocks in the future from storing invalid timestamps.
At shutdown, only update the timestamp if we got an authoritative
time to store.
|
|
|
|
boot using this
This is useful to make sure the system clock stays monotonic even on
systems that lack an RTC.
Also, why we are at it, also use the systemd release time for bumping
the clock, since it's a slightly less bad than starting with jan 1st,
1970.
This also moves timesyncd into the early bootphase, in order to make
sure this initial bump is guaranteed to have finished by the time we
start real daemons which might write to the file systemd and thus
shouldn't leave 1970's timestamps all over the place...
|
|
Also remove the equivalent functionality from networkd.
|
|
|
|
with CAP_SYS_TIME)
|
|
This reverts commit a555350d47c4b70d716a63424933b34902c98300.
This did not fix the problem, just made it harder to hit.
|
|
|
|
This is needed for the network monitor to work (as it requires networkd to set up the correct directories first).
|
|
Remember to drop this when the kernel gains autoloading for all netdev kinds.
|
|
|
|
To make sure we don't delay boot on systems where (some) network links are managed by someone else
we don't block if something else has successfully brought up a link.
We will still block until all links we are aware of that are managed by networkd have been
configured, but if no such links exist, and someone else have configured a link sufficiently
that it has a carrier, it may be that the link is ready so we should no longer block.
Note that in all likelyhood the link is not ready (no addresses/routes configured),
so whatever network managment daemon configured it should provide a similar wait-online
service to block network-online.target until it is ready.
The aim is to block as long as we know networking is not fully configured, but no longer. This
will allow systemd-networkd-wait-online.service to be enabled on any system, even if we don't
know whether networkd is the main/only network manager.
Even in the case networking is fully configured by networkd, the default behavior may not be
sufficient: if two links need to be configured, but the first is fully configured before the
second one appears we will assume the network is up. To work around that, we allow specifying
specific devices to wait for before considering the network up.
This unit is enabled by default, just like systemd-networkd, but will only be pulled in if
anyone pulls in network-online.target.
|
|
|
|
Otherwise we will not be able to queuery whether devices are initialized on kdbus enabled systems.
|
|
|
|
|
|
/tmp is only available in later boot, and we shouldn't create private
subdirs in it hence, while we are still in early boot.
|
|
Keep mounts done by udev rules private to udevd. Also, document how
MountFlags= may be used for this.
|
|
this is useful
|
|
long-running daemons
|
|
Add a new config 'Activating' directive which denotes whether a busname
is actually registered on the bus. It defaults to 'yes'.
If set to 'no', the .busname unit only uploads policy, which will remain
active as long as the unit is running.
|
|
Add the first 3270 terminal device that is associated with the Linux preferred
console to the list of virtualization consoles. This is required to
automatically start a getty if the conmode=3270 kernel parameter is specified
for Linux on z/VM instances. Note that a queued upstream patch also enable
the 3270 terminal device if it is associated with the Linux preferred console.
How
To successfully start agetty on a 3270 terminal, a change in the agetty
parameter order is required. Previously, agetty would started like this:
/sbin/agetty --keep-baud 3270/tty1 115200,38400,9600 TERM
The agetty program interprets the "3270/tty1" as baud rate and fails to start
with the "bad speed: 3270/tty1" error message. Fixing this in agetty is more
complex rather than reordering the command line parameters like this:
/sbin/agetty --keep-baud 115200,38400,9600 3270/tty1 TERM
According to agetty sources and "agetty --help", agetty accepts the "tty",
"baudrate tty", and "tty baudrate" specifications.
P.S. The "tty: Set correct tty name in 'active' sysfs attribute" introduces
a change to display the terminal device which is associated with the
Linux preferred console. This change helps to let systemd handle this
particular case only. Without the changes of this commit, no additional
3270 terminal device can be managed by systemd.
https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git/commit/?id=723abd87f6e536f1353c8f64f621520bc29523a3
|
|
|
|
|
|
The instance name is never escaped in the udev rule, but unescaped in the unit.
This results in the following error message on Asus boards:
Failed to get backlight or LED device 'backlight:eeepc/wmi': No such file or directory
|
|
|
|
|
|
|
|
This makes it easier to manually enable and disable
specific gettys, and also mirrors getty@.service.
http://lists.freedesktop.org/archives/systemd-devel/2014-February/017329.html
|
|
[tomegun: pruned the commit message as not to contradict the follow-up commit]
|
|
That is, without --enable-kdbus and kdbus running.
With --enable-kdbus things are more complicated, because dbus might be
necessary, if kdbus is missing at runtime. If it is not necessary,
the socket will be started, which is not imporant, but not the service.
|
|
|
|
process, but SIGKILL to all daemon processes
This should fix some race with terminating systemd --user, where the
system systemd instance might race against the user systemd instance
when sending SIGTERM.
|
|
We may not have a dbus daemon in the initrd (until we can rely on kdbus). In
this case, simply ignore any attempts at using the bus. There is only one user
for now, but surely more to come.
In order to work reliably in the real root without kdbus, but at the same time
don't delay boot when kdbus is in use, order ourselves after dbus.service.
|
|
They were supposed to make it easy to make the default.target a symlink
to these targets, but this was never advertised and we have a better
command for this now in "systemctl set-default". Since the install
section makes the output of "systemctl list-unit-files" confusing (since
it makes the units appear as "disabled"), let's drop the sections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
