From 4f87c47b35cf9c1f58872559ae67a2656712fdd6 Mon Sep 17 00:00:00 2001 From: William Giokas <1007380@gmail.com> Date: Thu, 25 Jul 2013 00:57:05 -0500 Subject: zsh_completion: fix zsh completion installation Moved zsh shell completion to shell-completion/zsh/_systemd for automake's sake. Also allow users to specify where the files should go with:: ./configure --with-zshcompletiondir=/path/to/some/where and by default going to `$datadir/zsh/site-functions` --- shell-completion/systemd-zsh-completion.zsh | 1102 --------------------------- shell-completion/zsh/_systemd | 1102 +++++++++++++++++++++++++++ 2 files changed, 1102 insertions(+), 1102 deletions(-) delete mode 100644 shell-completion/systemd-zsh-completion.zsh create mode 100644 shell-completion/zsh/_systemd (limited to 'shell-completion') diff --git a/shell-completion/systemd-zsh-completion.zsh b/shell-completion/systemd-zsh-completion.zsh deleted file mode 100644 index 1ab1311ec1..0000000000 --- a/shell-completion/systemd-zsh-completion.zsh +++ /dev/null @@ -1,1102 +0,0 @@ -#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent machinectl - -_ctls() -{ - local curcontext="$curcontext" state lstate line - case "$service" in - systemctl) - # -s for aggregated options like -aP - _arguments -s \ - {-h,--help}'[Show help]' \ - '--version[Show package version]' \ - {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \ - \*{-p,--property=}'[Show only properties by specific name]:unit property' \ - {-a,--all}'[Show all units/properties, including dead/empty ones]' \ - '--reverse[Show reverse dependencies]' \ - '--after[Show units ordered after]' \ - '--before[Show units ordered before]' \ - '--failed[Show only failed units]' \ - {-l,--full}"[Don't ellipsize unit names on output]" \ - '--fail[When queueing a new job, fail if conflicting jobs are pending]' \ - '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \ - '--kill-who=[Who to send signal to]:killwho:(main control all)' \ - {-s,--signal=}'[Which signal to send]:signal:_signals' \ - {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ - {-P,--privileged}'[Acquire privileges before execution]' \ - {-q,--quiet}'[Suppress output]' \ - '--no-block[Do not wait until operation finished]' \ - "--no-wall[Don't send wall message before halt/power-off/reboot]" \ - "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \ - '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \ - '--no-pager[Do not pipe output into a pager]' \ - '--no-ask-password[Do not ask for system passwords]' \ - '--system[Connect to system manager]' \ - '--user[Connect to user service manager]' \ - '--global[Enable/disable unit files globally]' \ - {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \ - '--root=[Enable unit files in the specified root directory]:directory:_directories' \ - '--runtime[Enable unit files only temporarily until next reboot]' \ - {-n,--lines=}'[Journal entries to show]:number of entries' \ - {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \ - '*::systemctl command:_systemctl_command' - ;; - loginctl) - _arguments -s \ - {-h,--help}'[Show help]' \ - '--version[Show package version]' \ - \*{-p,--property=}'[Show only properties by this name]:unit property' \ - {-a,--all}'[Show all properties, including empty ones]' \ - '--kill-who=[Who to send signal to]:killwho:(main control all)' \ - {-s,--signal=}'[Which signal to send]:signal:_signals' \ - '--no-ask-password[Do not ask for system passwords]' \ - {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ - {-P,--privileged}'[Acquire privileges before execution]' \ - '--no-pager[Do not pipe output into a pager]' \ - '*::loginctl command:_loginctl_command' - ;; - - hostnamectl) - _arguments -s \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--transient[Only set transient hostname]' \ - '--static[Only set static hostname]' \ - '--pretty[Only set pretty hostname]' \ - '--no-ask-password[Do not prompt for password]' \ - {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ - '*::hostnamectl commands:_hostnamectl_command' - ;; - journalctl) - _arguments -s \ - '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ - '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ - {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \ - '--system[Show system and kernel messages]' \ - '--user[Show messages from user services]' \ - {-b,--this-boot}'[Show data only from current boot]' \ - {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \ - '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \ - {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \ - {-f,--follow}'[Follow journal]' \ - {-n,--lines=}'[Number of journal entries to show]:integer' \ - '--no-tail[Show all lines, even in follow mode]' \ - {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \ - {-l,--full}'[Show long fields in full]' \ - {-a,--all}'[Show all fields, including long and unprintable]' \ - {-q,--quiet}"[Don't show privilege warning]" \ - '--no-pager[Do not pipe output into a pager]' \ - {-m,--merge}'[Show entries from all available journals]' \ - {-D,--directory=}'[Show journal files from directory]:directories:_directories' \ - '--interval=[Time interval for changing the FSS sealing key]:time interval' \ - '--verify-key=[Specify FSS verification key]:FSS key' \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--new-id128[Generate a new 128 Bit ID]' \ - '--header[Show journal header information]' \ - '--disk-usage[Show total disk usage]' \ - {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \ - '--setup-keys[Generate new FSS key pair]' \ - '--verify[Verify journal file consistency]' \ - '--list-catalog[List messages in catalog]' \ - '--update-catalog[Update binary catalog database]' \ - '*::default: _journal_none' - ;; - localectl) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - "--no-convert[Don't convert keyboard mappings]" \ - '--no-pager[Do not pipe output into a pager]' \ - '--no-ask-password[Do not prompt for password]' \ - {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ - '*::localectl commands:_localectl_command' - ;; - systemd-coredumpctl) - _arguments \ - {-o,--output=}'[Write output to FILE]:output file:_files' \ - '--no-pager[Do not pipe output into a pager]' \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '*::systemd-coredumpctl commands:_systemd-coredumpctl_command' - - ;; - timedatectl) - _arguments -s \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \ - '--no-pager[Do not pipe output into a pager]' \ - '--no-ask-password[Do not prompt for password]' \ - {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ - '*::timedatectl commands:_timedatectl_command' - ;; - udevadm) - _arguments \ - '--debug[Print debug messages to stderr]' \ - '--version[Print version number]' \ - '--help[Print help text]' \ - '*::udevadm commands:_udevadm_command' - ;; - systemd-analyze) - _arguments \ - {-h,--help}'[Show help text.]' \ - '--user[Shows performance data of user sessions instead of the system manager.]' \ - '--order[When generating graph for dot, show only order]' \ - '--require[When generating graph for dot, show only requirement]' \ - '*::systemd-analyze commands:_systemd_analyze_command' - ;; - systemd-ask-password) - _arguments \ - {-h,--help}'[Show this help]' \ - '--icon=[Icon name]' \ - '--timeout=[Timeout in sec]' \ - '--no-tty[Ask question via agent even on TTY]' \ - '--accept-cached[Accept cached passwords]' \ - '--multiple[List multiple passwords if available]' - ;; - systemd-cat) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Show package version.]' \ - {-t,--identifier=}'[Set syslog identifier.]' \ - {-p,--priority=}'[Set priority value.]:value:({0..7})' \ - '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \ - ':Message' - ;; - systemd-cgls) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--no-pager[Do not pipe output into a pager]' \ - {-a,--all}'[Show all groups, including empty]' \ - '-k[Include kernel threads in output]' \ - ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)' - ;; - systemd-cgtop) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Print version and exit]' \ - '(-c -m -i -t)-p[Order by path]' \ - '(-c -p -m -i)-t[Order by number of tasks]' \ - '(-m -p -i -t)-c[Order by CPU load]' \ - '(-c -p -i -t)-m[Order by memory load]' \ - '(-c -m -p -t)-i[Order by IO load]' \ - {-d,--delay=}'[Specify delay]' \ - {-n,--iterations=}'[Run for N iterations before exiting]' \ - {-b,--batch}'[Run in batch mode, accepting no input]' \ - '--depth=[Maximum traversal depth]' - ;; - systemd-delta) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--no-pager[Do not pipe output into a pager]' \ - '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \ - {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \ - ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)' - ;; - systemd-detect-virt) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - {-c,--container}'[Only detect whether we are run in a container]' \ - {-v,--vm}'[Only detect whether we are run in a VM]' \ - {-q,--quiet}"[Don't output anything, just set return value]" - ;; - systemd-inhibit) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \ - '--who=[A descriptive string who is inhibiting]' \ - '--why=[A descriptive string why is being inhibited]' \ - '--mode=[One of block or delay]' \ - '--list[List active inhibitors]' \ - '*:commands:_systemd_inhibit_command' - ;; - systemd-machine-id-setup) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' - ;; - systemd-notify) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--ready[Inform the init system about service start-up completion.]' \ - '--pid=[Inform the init system about the main PID of the daemon]' \ - '--status=[Send a free-form status string for the daemon to the init systemd]' \ - '--booted[Returns 0 if the system was booted up with systemd]' \ - '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)' - ;; - systemd-nspawn) - _arguments \ - {-h,--help}'[Show this help]' \ - {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \ - {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \ - {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \ - '--uuid=[Set the specified uuid for the container.]' \ - {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \ - '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \ - '--read-only[Mount the root file system read only for the container.]' \ - '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \ - "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \ - '-j[Equivalent to --link-journal=guest.]' - ;; - systemd-tmpfiles) - _arguments \ - '--create[Create, set ownership/permissions based on the config files.]' \ - '--clean[Clean up all files and directories with an age parameter configured.]' \ - '--remove[All files and directories marked with r, R in the configuration files are removed.]' \ - '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \ - '--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \ - '--help[Prints a short help text and exits.]' \ - '*::files:_files' - ;; - systemd-tty-ask-password-agent) - _arguments \ - {-h,--help}'[Prints a short help text and exits.]' \ - '--version[Prints a short version string and exits.]' \ - '--list[Lists all currently pending system password requests.]' \ - '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \ - '--watch[Continuously process password requests.]' \ - '--wall[Forward password requests to wall(1).]' \ - '--plymouth[Ask question with plymouth(8).]' \ - '--console[Ask question on /dev/console.]' - ;; - machinectl) - _arguments \ - {-h,--help}'[Prints a short help text and exits.]' \ - '--version[Prints a short version string and exits.]' \ - {-p,--property=}'[Limit output to specified property.]:property:(Name Id Timestamp TimestampMonotonic Service Scope Leader Class State RootDirectory)' \ - {-a,--all}'[Show all proerties]' \ - (-l,--full)'[Do not ellipsize cgroup members]' \ - '--no-pager[Do not pipe output into a pager]' \ - '--no-ask-password[Do not ask for system passwords]' \ - '--kill-who=[Who to send signal to]:killwho:(leader all)' \ - {-s,--signal=}'[Which signal to send]:signal:_signals' \ - {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ - {-P,--privileged}'[Acquire privileges before execution]' \ - '*::machinectl command:_machinectl_command' - ;; - *) _message 'eh?' ;; - esac -} - -_systemd-nspawn(){ - local -a _caps - _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH - CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE - CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP - CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG - CAP_SYS_RESOURCE CAP_SYS_BOOT ) - _values -s , 'capabilities' "$_caps[@]" -} - -_systemd_inhibit_command(){ - if (( CURRENT == 1 )); then - compset -q - _normal - else - local n=${words[(b:2:i)[^-]*]} - if (( n <= CURRENT )); then - compset -n $n - _alternative \ - 'files:file:_files' \ - 'commands:command:_normal' && return 0 - fi - _default - fi - -} - -_systemd_analyze_command(){ - local -a _systemd_analyze_cmds - # Descriptions taken from systemd-analyze --help. - _systemd_analyze_cmds=( - 'time:Print time spent in the kernel before reaching userspace' - 'blame:Print list of running units ordered by time to init' - 'critical-chain:Print a tree of the time critical chain of units' - 'plot:Output SVG graphic showing service initialization' - 'dot:Dump dependency graph (in dot(1) format)' - ) - - if (( CURRENT == 1 )); then - _describe "options" _systemd_analyze_cmds - else - _message "no more options" - fi -} - -_hosts_or_user_at_host() -{ - _alternative \ - 'users-hosts:: _user_at_host' \ - 'hosts:: _hosts' -} - -_outputmodes() { - local -a _output_opts - _output_opts=(short short-monotonic verbose export json json-pretty json-see cat) - _describe -t output 'output mode' _output_opts || compadd "$@" -} - - -(( $+functions[_systemctl_command] )) || _systemctl_command() -{ - local -a _systemctl_cmds - _systemctl_cmds=( - "list-units:List units" - "start:Start (activate) one or more units" - "stop:Stop (deactivate) one or more units" - "reload:Reload one or more units" - "restart:Start or restart one or more units" - "condrestart:Restart one or more units if active" - "try-restart:Restart one or more units if active" - "reload-or-restart:Reload one or more units if possible, otherwise start or restart" - "force-reload:Reload one or more units if possible, otherwise restart if active" - "hibernate:Hibernate the system" - "hybrid-sleep:Hibernate and suspend the system" - "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active" - "isolate:Start one unit and stop all others" - "kill:Send signal to processes of a unit" - "is-active:Check whether units are active" - "is-failed:Check whether units are failed" - "status:Show runtime status of one or more units" - "show:Show properties of one or more units/jobs or the manager" - "reset-failed:Reset failed state for all, one, or more units" - "load:Load one or more units" - "list-unit-files:List installed unit files" - "enable:Enable one or more unit files" - "disable:Disable one or more unit files" - "reenable:Reenable one or more unit files" - "preset:Enable/disable one or more unit files based on preset configuration" - "help:Show documentation for specified units" - "list-dependencies:Show unit dependency tree" - "mask:Mask one or more units" - "unmask:Unmask one or more units" - "link:Link one or more units files into the search path" - "is-enabled:Check whether unit files are enabled" - "list-jobs:List jobs" - "cancel:Cancel all, one, or more jobs" - "dump:Dump server status" - "snapshot:Create a snapshot" - "delete:Remove one or more snapshots" - "show-environment:Dump environment" - "set-environment:Set one or more environment variables" - "unset-environment:Unset one or more environment variables" - "daemon-reload:Reload systemd manager configuration" - "daemon-reexec:Reexecute systemd manager" - "default:Enter system default mode" - "rescue:Enter system rescue mode" - "emergency:Enter system emergency mode" - "halt:Shut down and halt the system" - "suspend:Suspend the system" - "poweroff:Shut down and power-off the system" - "reboot:Shut down and reboot the system" - "kexec:Shut down and reboot the system with kexec" - "exit:Ask for user instance termination" - ) - - if (( CURRENT == 1 )); then - _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@" - else - local curcontext="$curcontext" - - cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}" - # Deal with any aliases - case $cmd in - condrestart) cmd="try-restart";; - force-reload) cmd="reload-or-try-restart";; - esac - - if (( $#cmd )); then - curcontext="${curcontext%:*:*}:systemctl-${cmd}:" - - local update_policy - zstyle -s ":completion:${curcontext}:" cache-policy update_policy - if [[ -z "$update_policy" ]]; then - zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy - fi - - _call_function ret _systemctl_$cmd || _message 'no more arguments' - else - _message "unknown systemctl command: $words[1]" - fi - return ret - fi -} - -__systemctl() -{ - local -a _modes - _modes=("--user" "--system") - systemctl ${words:*_modes} --full --no-legend --no-pager "$@" -} - - -# Fills the unit list -_systemctl_all_units() -{ - if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) && - ! _retrieve_cache SYS_ALL_UNITS; - then - _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) ) - _store_cache SYS_ALL_UNITS _sys_all_units - fi -} - -# Fills the unit list including all file units -_systemctl_really_all_units() -{ - local -a all_unit_files; - local -a really_all_units; - if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) && - ! _retrieve_cache SYS_REALLY_ALL_UNITS; - then - all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) ) - _systemctl_all_units - really_all_units=($_sys_all_units $all_unit_files) - _sys_really_all_units=(${(u)really_all_units}) - _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units - fi -} - -_filter_units_by_property() { - local property=$1 value=$2 ; shift ; shift - local -a units ; units=($*) - local prop unit - for ((i=1; $i <= ${#units[*]}; i++)); do - # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for - # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to - # revert to calling 'systemctl show' once for all units, which is way - # faster - unit=${units[i]} - prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"} - if [[ "${prop}" = "$property=$value" ]]; then - echo " ${unit}" - fi - done -} - -_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )} -_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" || $c == "failed" ]] && echo " $a"; done; }) )} -_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo " $a"; done; }) )} -_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo " $a"; done; }) )} -_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo " $a"; done; }) )} -_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo " $a"; done; }) )} - -# Completion functions for ALL_UNITS -for fun in is-active is-failed is-enabled status show mask preset help list-dependencies ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_really_all_units - compadd "$@" -a - _sys_really_all_units - } -done - -# Completion functions for ENABLED_UNITS -for fun in disable reenable ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_enabled_units - _systemctl_disabled_units - compadd "$@" -a - _sys_enabled_units _sys_disabled_units - } -done - -# Completion functions for DISABLED_UNITS -(( $+functions[_systemctl_enable] )) || _systemctl_enable() -{ - _systemctl_disabled_units - compadd "$@" -a - _sys_disabled_units -} - -# Completion functions for FAILED_UNITS -(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed() -{ - _systemctl_failed_units - compadd "$@" -a - _sys_failed_units || _message "no failed unit found" -} - -# Completion functions for STARTABLE_UNITS -(( $+functions[_systemctl_start] )) || _systemctl_start() -{ - _systemctl_inactive_units - compadd "$@" -a - _sys_inactive_units -} - -# Completion functions for STOPPABLE_UNITS -for fun in stop kill try-restart condrestart ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_active_units - compadd "$@" - $( _filter_units_by_property CanStop yes \ - ${_sys_active_units[*]} ) - } -done - -# Completion functions for ISOLATABLE_UNITS -(( $+functions[_systemctl_isolate] )) || _systemctl_isolate() -{ - _systemctl_all_units - compadd "$@" - $( _filter_units_by_property AllowIsolate yes \ - ${_sys_all_units[*]} ) -} - -# Completion functions for RELOADABLE_UNITS -for fun in reload reload-or-try-restart force-reload ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_active_units - compadd "$@" - $( _filter_units_by_property CanReload yes \ - ${_sys_active_units[*]} ) - } -done - -# Completion functions for RESTARTABLE_UNITS -for fun in restart reload-or-restart ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_all_units - compadd "$@" - $( _filter_units_by_property CanStart yes \ - ${_sys_all_units[*]} | while read line; do \ - [[ "$line" =~ \.device$ ]] || echo " $line"; \ - done ) - } -done - -# Completion functions for MASKED_UNITS -(( $+functions[_systemctl_unmask] )) || _systemctl_unmask() -{ - _systemctl_masked_units - compadd "$@" -a - _sys_masked_units || _message "no masked unit found" -} - -# Completion functions for JOBS -(( $+functions[_systemctl_cancel] )) || _systemctl_cancel() -{ - compadd "$@" - $(__systemctl list-jobs \ - | cut -d' ' -f1 2>/dev/null ) || _message "no job found" -} - -# Completion functions for SNAPSHOTS -(( $+functions[_systemctl_delete] )) || _systemctl_delete() -{ - compadd "$@" - $(__systemctl list-units --type snapshot --all \ - | cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found" -} - -# Completion functions for ENVS -for fun in set-environment unset-environment ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - local fun=$0 ; fun=${fun##_systemctl_} - local suf - if [[ "${fun}" = "set-environment" ]]; then - suf='-S=' - fi - - compadd "$@" ${suf} - $(systemctl show-environment \ - | while read line; do echo " ${line%%\=}";done ) - } -done - -(( $+functions[_systemctl_link] )) || _systemctl_link() { _files } - -# no systemctl completion for: -# [STANDALONE]='daemon-reexec daemon-reload default dump -# emergency exit halt kexec list-jobs list-units -# list-unit-files poweroff reboot rescue show-environment' -# [NAME]='snapshot load' - -_systemctl_caching_policy() -{ - local _sysunits - local -a oldcache - - # rebuild if cache is more than a day old - oldcache=( "$1"(mh+1) ) - (( $#oldcache )) && return 0 - - _sysunits=($(__systemctl --all | cut -d' ' -f1)) - - if (( $#_sysunits )); then - for unit in $_sysunits; do - [[ "$unit" -nt "$1" ]] && return 0 - done - fi - - return 1 -} - -_list_fields() { - local -a journal_fields - journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC} - ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID} - _{P,U,G}ID _COMM _EXE _CMDLINE - _AUDIT_{SESSION,LOGINUID} - _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID} - _SYSTEMD_USER_UNIT - _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP - _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT - _KERNEL_{DEVICE,SUBSYSTEM} - _UDEV_{SYSNAME,DEVNODE,DEVLINK} - __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP) - _describe 'possible fields' journal_fields -} - -_journal_none() { - local -a _commands _files - _commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} ) - _alternative : \ - 'files:/dev files:_files -W /dev -P /dev/' \ - "commands:commands:($_commands[@])" \ - 'fields:fields:_list_fields' -} - -_journal_fields() { - local -a _fields cmd - cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" ) - _fields=( ${(f)"$(_call_program fields $cmd[@])"} ) - typeset -U _fields - _describe 'possible values' _fields -} - - -_loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo " $a"; done; }) )} -_loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo " $a"; done; }) )} -_loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo " $a"; done; }) )} - -# Completion functions for SESSIONS -for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do - (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() - { - _loginctl_all_sessions - compadd "$@" -a - _sys_all_sessions - } -done - -# Completion functions for USERS -for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do - (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() - { - _loginctl_all_users - compadd "$@" -a - _sys_all_users - } -done - -# Completion functions for SEATS -(( $+functions[_loginctl_seats] )) || _loginctl_seats() -{ - _loginctl_all_seats - compadd "$@" -a - _sys_all_seats -} -for fun in seat-status show-seat terminate-seat ; do - (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() - { _loginctl_seats } -done - -# Completion functions for ATTACH -(( $+functions[_loginctl_attach] )) || _loginctl_attach() -{ - _loginctl_all_seats - - _arguments -w -C -S -s \ - ':seat:_loginctl_seats' \ - '*:device:_files' -} - -# no loginctl completion for: -# [STANDALONE]='list-sessions list-users list-seats flush-devices' - -(( $+functions[_loginctl_command] )) || _loginctl_command() -{ - local -a _loginctl_cmds - _loginctl_cmds=( - "list-sessions:List sessions" - "session-status:Show session status" - "show-session:Show properties of one or more sessions" - "activate:Activate a session" - "lock-session:Screen lock one or more sessions" - "unlock-session:Screen unlock one or more sessions" - "terminate-session:Terminate one or more sessions" - "kill-session:Send signal to processes of a session" - "list-users:List users" - "user-status:Show user status" - "show-user:Show properties of one or more users" - "enable-linger:Enable linger state of one or more users" - "disable-linger:Disable linger state of one or more users" - "terminate-user:Terminate all sessions of one or more users" - "kill-user:Send signal to processes of a user" - "list-seats:List seats" - "seat-status:Show seat status" - "show-seat:Show properties of one or more seats" - "attach:Attach one or more devices to a seat" - "flush-devices:Flush all device associations" - "terminate-seat:Terminate all sessions on one or more seats" - ) - - if (( CURRENT == 1 )); then - _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@" - else - local curcontext="$curcontext" - - cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}" - - if (( $#cmd )); then - curcontext="${curcontext%:*:*}:loginctl-${cmd}:" - - _call_function ret _loginctl_$cmd || _message 'no more arguments' - else - _message "unknown loginctl command: $words[1]" - fi - return ret - fi -} - -_hostnamectl_command() { - local -a _hostnamectl_cmds - _hostnamectl_cmds=( - "status:Show current hostname settings" - "set-hostname:Set system hostname" - "set-icon-name:Set icon name for host" - ) - if (( CURRENT == 1 )); then - _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@" - else - local curcontext="$curcontext" - cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}" - if (( $#cmd )); then - [[ $cmd == status ]] && msg="no options" || msg="options for $cmd" - _message "$msg" - else - _message "unknown hostnamectl command: $words[1]" - fi - fi -} - -_localectl_set-locale() { - local -a _confs _locales - local expl suf - _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} ) - _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} ) - if [[ -prefix 1 *\= ]]; then - local conf=${PREFIX%%\=*} - compset -P1 '*=' - _wanted locales expl "locales configs" \ - _combination localeconfs confs=$conf locales "$@" - - else - compadd -S '=' $_confs - fi -} - -_localectl_set-keymap() { - local -a _keymaps - _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} ) - if (( CURRENT <= 3 )); then - _describe keymaps _keymaps - else - _message "no more options" - fi -} - -_localectl_set-x11-keymap() { - if (( $+commands[pkg-config] )); then - local -a _file _layout _model _variant _options - local _xorg_lst - _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"} - _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} ) - _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} ) - _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} ) - _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} ) - _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} ) - #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} ) - #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} ) - #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} ) - #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} ) - - case $CURRENT in - 2) _describe layouts _layout ;; - 3) _describe models _model;; - 4) _describe variants _variant;; - 5) _describe options _options;; - *) _message "no more options" - esac - fi -} - - -_localectl_command() { - local -a _localectl_cmds - _localectl_cmds=( - 'status:Show current locale settings' - 'set-locale:Set system locale' - 'list-locales:Show known locales' - 'set-keymap:Set virtual console keyboard mapping' - 'list-keymaps:Show known virtual console keyboard mappings' - 'set-x11-keymap:Set X11 keyboard mapping' - ) - if (( CURRENT == 1 )); then - _describe -t commands 'localectl command' _localectl_cmds - else - local curcontext="$curcontext" - cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}" - if (( $+functions[_localectl_$cmd] )); then - _localectl_$cmd - else - _message "no more options" - fi - fi -} - -_timedatectl_set-timezone(){ - local -a _timezones - _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} ) - compadd "$_timezones[@]" -} - -_timedatectl_set-time(){ - _message "YYYY-MM-DD HH:MM:SS" -} - -_timedatectl_set-local-rtc(){ - local -a _options - _options=( - '0:Maintain RTC in universal time' - '1:Maintain RTC in local time' - ) - _describe options _options -} - -_timedatectl_set-ntp(){ - local -a _options - _options=( - '0:Disable NTP based network time configuration' - '1:Enable NTP based network time configuration' - ) - _describe options _options -} - -_timedatectl_command(){ - local -a _timedatectl_cmds - _timedatectl_cmds=( - 'status:Show current time settings' - 'set-time:Set system time' - 'set-timezone:Set system timezone' - 'list-timezones:Show known timezones' - 'set-local-rtc:Control whether RTC is in local time' - 'set-ntp:Control whether NTP is enabled' - ) - if (( CURRENT == 1 )); then - _describe -t commands 'timedatectl command' _timedatectl_cmds - else - local curcontext="$curcontext" - cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}" - if (( $#cmd )); then - if (( $+functions[_timedatectl_$cmd] )); then - _timedatectl_$cmd - else - _message "no more options" - fi - else - _message "unknown timedatectl command: $words[1]" - fi - fi -} -_systemd-coredumpctl_command(){ - local -a _systemd_coredumpctl_cmds - _systemd_coredumpctl_cmds=( - 'list:List available coredumps' - 'dump:Print coredump to std' - ) - if (( CURRENT == 1 )); then - _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds - else - local curcontext="$curcontext" - local -a _dumps - cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}" - if (( $#cmd )); then - # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid - _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" ) - if [[ -n "$_dumps" ]]; then - _describe -t pids 'coredumps' _dumps - else - _message "no coredumps" - fi - else - _message "no more options" - fi - - fi - -} - -(( $+functions[_machinectl_command] )) || _machinectl_command() -{ - local -a _machinectl_cmds - _machinectl_cmds=( - "list:List currently running VMs/containers" - "status:Show VM/container status" - "show:Show properties of one or more VMs/containers" - "terminate:Terminate one or more VMs/containers" - "kill:Send signal to process or a VM/container" - ) - if (( CURRENT == 1 )); then - _describe -t commands 'machinectl command' _machinectl_cmds || compadd "$@" - else - local curcontext="$curcontext" - cmd="${${_machinectl_cmds[(r)$words[1]:*]%%:*}}" - if (( $#cmd )); then - case $cmd in - list) msg="no options" ;; - *) - _machines=( "${(foa)$(machinectl list | awk '{print $1}')}" ) - if [[ -n "$_machines" ]]; then - _describe 'machines' _machines - else - _message 'no machines' - fi - esac - else - _message "no more options" - fi - fi -} - -_udevadm_info(){ - _arguments \ - '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \ - '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \ - '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \ - '--root[Print absolute paths in name or symlink query.]' \ - '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \ - '--export[Print output as key/value pairs.]' \ - '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \ - '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \ - '--export-db[Export the content of the udev database.]' \ - '--cleanup-db[Cleanup the udev database.]' -} - -_udevadm_trigger(){ - _arguments \ - '--verbose[Print the list of devices which will be triggered.]' \ - '--dry-run[Do not actually trigger the event.]' \ - '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \ - '--action=[Type of event to be triggered.]:actions:(add change remove)' \ - '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \ - '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \ - '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \ - '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \ - '--property-match=[Trigger events for devices with a matching property value.]' \ - '--tag-match=property[Trigger events for devices with a matching tag.]' \ - '--sysname-match=[Trigger events for devices with a matching sys device name.]' \ - '--parent-match=[Trigger events for all children of a given device.]' -} - -_udevadm_settle(){ - _arguments \ - '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \ - '--seq-start=[Wait only for events after the given sequence number.]' \ - '--seq-end=[Wait only for events before the given sequence number.]' \ - '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \ - '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \ - '--help[Print help text.]' -} - -_udevadm_control(){ - _arguments \ - '--exit[Signal and wait for systemd-udevd to exit.]' \ - '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \ - '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \ - '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \ - '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \ - '--property=[Set a global property for all events.]' \ - '--children-max=[Set the maximum number of events.]' \ - '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \ - '--help[Print help text.]' -} - -_udevadm_monitor(){ - _arguments \ - '--kernel[Print the kernel uevents.]' \ - '--udev[Print the udev event after the rule processing.]' \ - '--property[Also print the properties of the event.]' \ - '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \ - '--tag-match=[Filter events by property.]' \ - '--help[Print help text.]' -} - -_udevadm_test(){ - _arguments \ - '--action=[The action string.]:actions:(add change remove)' \ - '--subsystem=[The subsystem string.]' \ - '--help[Print help text.]' \ - '*::devpath:_files -P /sys/ -W /sys' -} - -_udevadm_test-builtin(){ - if (( CURRENT == 2 )); then - _arguments \ - '--help[Print help text]' \ - '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)' - elif (( CURRENT == 3 )); then - _arguments \ - '--help[Print help text]' \ - '*::syspath:_files -P /sys -W /sys' - else - _arguments \ - '--help[Print help text]' - fi -} - -_udevadm_mounts(){ - local dev_tmp dpath_tmp mp_tmp mline - - tmp=( "${(@f)$(< /etc/mtab)}" ) - dev_tmp=( "${(@)${(@)tmp%% *}:#none}" ) - mp_tmp=( "${(@)${(@)tmp#* }%% *}" ) - - local MATCH - mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}") - dpath_tmp=( "${(@Mq)dev_tmp:#/*}" ) - dev_tmp=( "${(@q)dev_tmp:#/*}" ) - - _alternative \ - 'device-paths: device path:compadd -a dpath_tmp' \ - 'directories:mount point:compadd -a mp_tmp' -} - - -_udevadm_command(){ - local -a _udevadm_cmds - _udevadm_cmds=( - 'info:query sysfs or the udev database' - 'trigger:request events from the kernel' - 'settle:wait for the event queue to finish' - 'control:control the udev daemon' - 'monitor:listen to kernel and udev events' - 'test:test an event run' - 'test-builtin:test a built-in command' - ) - - if ((CURRENT == 1)); then - _describe -t commands 'udevadm commands' _udevadm_cmds - else - local curcontext="$curcontext" - cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}" - if (($#cmd)); then - if (( $+functions[_udevadm_$cmd] )); then - _udevadm_$cmd - else - _message "no options for $cmd" - fi - else - _message "no more options" - fi - fi -} - -_ctls "$@" - -#vim: set ft=zsh sw=4 ts=4 et diff --git a/shell-completion/zsh/_systemd b/shell-completion/zsh/_systemd new file mode 100644 index 0000000000..1ab1311ec1 --- /dev/null +++ b/shell-completion/zsh/_systemd @@ -0,0 +1,1102 @@ +#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent machinectl + +_ctls() +{ + local curcontext="$curcontext" state lstate line + case "$service" in + systemctl) + # -s for aggregated options like -aP + _arguments -s \ + {-h,--help}'[Show help]' \ + '--version[Show package version]' \ + {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \ + \*{-p,--property=}'[Show only properties by specific name]:unit property' \ + {-a,--all}'[Show all units/properties, including dead/empty ones]' \ + '--reverse[Show reverse dependencies]' \ + '--after[Show units ordered after]' \ + '--before[Show units ordered before]' \ + '--failed[Show only failed units]' \ + {-l,--full}"[Don't ellipsize unit names on output]" \ + '--fail[When queueing a new job, fail if conflicting jobs are pending]' \ + '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \ + '--kill-who=[Who to send signal to]:killwho:(main control all)' \ + {-s,--signal=}'[Which signal to send]:signal:_signals' \ + {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ + {-P,--privileged}'[Acquire privileges before execution]' \ + {-q,--quiet}'[Suppress output]' \ + '--no-block[Do not wait until operation finished]' \ + "--no-wall[Don't send wall message before halt/power-off/reboot]" \ + "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \ + '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \ + '--no-pager[Do not pipe output into a pager]' \ + '--no-ask-password[Do not ask for system passwords]' \ + '--system[Connect to system manager]' \ + '--user[Connect to user service manager]' \ + '--global[Enable/disable unit files globally]' \ + {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \ + '--root=[Enable unit files in the specified root directory]:directory:_directories' \ + '--runtime[Enable unit files only temporarily until next reboot]' \ + {-n,--lines=}'[Journal entries to show]:number of entries' \ + {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \ + '*::systemctl command:_systemctl_command' + ;; + loginctl) + _arguments -s \ + {-h,--help}'[Show help]' \ + '--version[Show package version]' \ + \*{-p,--property=}'[Show only properties by this name]:unit property' \ + {-a,--all}'[Show all properties, including empty ones]' \ + '--kill-who=[Who to send signal to]:killwho:(main control all)' \ + {-s,--signal=}'[Which signal to send]:signal:_signals' \ + '--no-ask-password[Do not ask for system passwords]' \ + {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ + {-P,--privileged}'[Acquire privileges before execution]' \ + '--no-pager[Do not pipe output into a pager]' \ + '*::loginctl command:_loginctl_command' + ;; + + hostnamectl) + _arguments -s \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + '--transient[Only set transient hostname]' \ + '--static[Only set static hostname]' \ + '--pretty[Only set pretty hostname]' \ + '--no-ask-password[Do not prompt for password]' \ + {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ + '*::hostnamectl commands:_hostnamectl_command' + ;; + journalctl) + _arguments -s \ + '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ + '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ + {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \ + '--system[Show system and kernel messages]' \ + '--user[Show messages from user services]' \ + {-b,--this-boot}'[Show data only from current boot]' \ + {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \ + '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \ + {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \ + {-f,--follow}'[Follow journal]' \ + {-n,--lines=}'[Number of journal entries to show]:integer' \ + '--no-tail[Show all lines, even in follow mode]' \ + {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \ + {-l,--full}'[Show long fields in full]' \ + {-a,--all}'[Show all fields, including long and unprintable]' \ + {-q,--quiet}"[Don't show privilege warning]" \ + '--no-pager[Do not pipe output into a pager]' \ + {-m,--merge}'[Show entries from all available journals]' \ + {-D,--directory=}'[Show journal files from directory]:directories:_directories' \ + '--interval=[Time interval for changing the FSS sealing key]:time interval' \ + '--verify-key=[Specify FSS verification key]:FSS key' \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + '--new-id128[Generate a new 128 Bit ID]' \ + '--header[Show journal header information]' \ + '--disk-usage[Show total disk usage]' \ + {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \ + '--setup-keys[Generate new FSS key pair]' \ + '--verify[Verify journal file consistency]' \ + '--list-catalog[List messages in catalog]' \ + '--update-catalog[Update binary catalog database]' \ + '*::default: _journal_none' + ;; + localectl) + _arguments \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + "--no-convert[Don't convert keyboard mappings]" \ + '--no-pager[Do not pipe output into a pager]' \ + '--no-ask-password[Do not prompt for password]' \ + {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ + '*::localectl commands:_localectl_command' + ;; + systemd-coredumpctl) + _arguments \ + {-o,--output=}'[Write output to FILE]:output file:_files' \ + '--no-pager[Do not pipe output into a pager]' \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + '*::systemd-coredumpctl commands:_systemd-coredumpctl_command' + + ;; + timedatectl) + _arguments -s \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \ + '--no-pager[Do not pipe output into a pager]' \ + '--no-ask-password[Do not prompt for password]' \ + {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ + '*::timedatectl commands:_timedatectl_command' + ;; + udevadm) + _arguments \ + '--debug[Print debug messages to stderr]' \ + '--version[Print version number]' \ + '--help[Print help text]' \ + '*::udevadm commands:_udevadm_command' + ;; + systemd-analyze) + _arguments \ + {-h,--help}'[Show help text.]' \ + '--user[Shows performance data of user sessions instead of the system manager.]' \ + '--order[When generating graph for dot, show only order]' \ + '--require[When generating graph for dot, show only requirement]' \ + '*::systemd-analyze commands:_systemd_analyze_command' + ;; + systemd-ask-password) + _arguments \ + {-h,--help}'[Show this help]' \ + '--icon=[Icon name]' \ + '--timeout=[Timeout in sec]' \ + '--no-tty[Ask question via agent even on TTY]' \ + '--accept-cached[Accept cached passwords]' \ + '--multiple[List multiple passwords if available]' + ;; + systemd-cat) + _arguments \ + {-h,--help}'[Show this help]' \ + '--version[Show package version.]' \ + {-t,--identifier=}'[Set syslog identifier.]' \ + {-p,--priority=}'[Set priority value.]:value:({0..7})' \ + '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \ + ':Message' + ;; + systemd-cgls) + _arguments \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + '--no-pager[Do not pipe output into a pager]' \ + {-a,--all}'[Show all groups, including empty]' \ + '-k[Include kernel threads in output]' \ + ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)' + ;; + systemd-cgtop) + _arguments \ + {-h,--help}'[Show this help]' \ + '--version[Print version and exit]' \ + '(-c -m -i -t)-p[Order by path]' \ + '(-c -p -m -i)-t[Order by number of tasks]' \ + '(-m -p -i -t)-c[Order by CPU load]' \ + '(-c -p -i -t)-m[Order by memory load]' \ + '(-c -m -p -t)-i[Order by IO load]' \ + {-d,--delay=}'[Specify delay]' \ + {-n,--iterations=}'[Run for N iterations before exiting]' \ + {-b,--batch}'[Run in batch mode, accepting no input]' \ + '--depth=[Maximum traversal depth]' + ;; + systemd-delta) + _arguments \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + '--no-pager[Do not pipe output into a pager]' \ + '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \ + {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \ + ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)' + ;; + systemd-detect-virt) + _arguments \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + {-c,--container}'[Only detect whether we are run in a container]' \ + {-v,--vm}'[Only detect whether we are run in a VM]' \ + {-q,--quiet}"[Don't output anything, just set return value]" + ;; + systemd-inhibit) + _arguments \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \ + '--who=[A descriptive string who is inhibiting]' \ + '--why=[A descriptive string why is being inhibited]' \ + '--mode=[One of block or delay]' \ + '--list[List active inhibitors]' \ + '*:commands:_systemd_inhibit_command' + ;; + systemd-machine-id-setup) + _arguments \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' + ;; + systemd-notify) + _arguments \ + {-h,--help}'[Show this help]' \ + '--version[Show package version]' \ + '--ready[Inform the init system about service start-up completion.]' \ + '--pid=[Inform the init system about the main PID of the daemon]' \ + '--status=[Send a free-form status string for the daemon to the init systemd]' \ + '--booted[Returns 0 if the system was booted up with systemd]' \ + '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)' + ;; + systemd-nspawn) + _arguments \ + {-h,--help}'[Show this help]' \ + {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \ + {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \ + {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \ + '--uuid=[Set the specified uuid for the container.]' \ + {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \ + '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \ + '--read-only[Mount the root file system read only for the container.]' \ + '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \ + "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \ + '-j[Equivalent to --link-journal=guest.]' + ;; + systemd-tmpfiles) + _arguments \ + '--create[Create, set ownership/permissions based on the config files.]' \ + '--clean[Clean up all files and directories with an age parameter configured.]' \ + '--remove[All files and directories marked with r, R in the configuration files are removed.]' \ + '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \ + '--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \ + '--help[Prints a short help text and exits.]' \ + '*::files:_files' + ;; + systemd-tty-ask-password-agent) + _arguments \ + {-h,--help}'[Prints a short help text and exits.]' \ + '--version[Prints a short version string and exits.]' \ + '--list[Lists all currently pending system password requests.]' \ + '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \ + '--watch[Continuously process password requests.]' \ + '--wall[Forward password requests to wall(1).]' \ + '--plymouth[Ask question with plymouth(8).]' \ + '--console[Ask question on /dev/console.]' + ;; + machinectl) + _arguments \ + {-h,--help}'[Prints a short help text and exits.]' \ + '--version[Prints a short version string and exits.]' \ + {-p,--property=}'[Limit output to specified property.]:property:(Name Id Timestamp TimestampMonotonic Service Scope Leader Class State RootDirectory)' \ + {-a,--all}'[Show all proerties]' \ + (-l,--full)'[Do not ellipsize cgroup members]' \ + '--no-pager[Do not pipe output into a pager]' \ + '--no-ask-password[Do not ask for system passwords]' \ + '--kill-who=[Who to send signal to]:killwho:(leader all)' \ + {-s,--signal=}'[Which signal to send]:signal:_signals' \ + {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ + {-P,--privileged}'[Acquire privileges before execution]' \ + '*::machinectl command:_machinectl_command' + ;; + *) _message 'eh?' ;; + esac +} + +_systemd-nspawn(){ + local -a _caps + _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH + CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE + CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP + CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG + CAP_SYS_RESOURCE CAP_SYS_BOOT ) + _values -s , 'capabilities' "$_caps[@]" +} + +_systemd_inhibit_command(){ + if (( CURRENT == 1 )); then + compset -q + _normal + else + local n=${words[(b:2:i)[^-]*]} + if (( n <= CURRENT )); then + compset -n $n + _alternative \ + 'files:file:_files' \ + 'commands:command:_normal' && return 0 + fi + _default + fi + +} + +_systemd_analyze_command(){ + local -a _systemd_analyze_cmds + # Descriptions taken from systemd-analyze --help. + _systemd_analyze_cmds=( + 'time:Print time spent in the kernel before reaching userspace' + 'blame:Print list of running units ordered by time to init' + 'critical-chain:Print a tree of the time critical chain of units' + 'plot:Output SVG graphic showing service initialization' + 'dot:Dump dependency graph (in dot(1) format)' + ) + + if (( CURRENT == 1 )); then + _describe "options" _systemd_analyze_cmds + else + _message "no more options" + fi +} + +_hosts_or_user_at_host() +{ + _alternative \ + 'users-hosts:: _user_at_host' \ + 'hosts:: _hosts' +} + +_outputmodes() { + local -a _output_opts + _output_opts=(short short-monotonic verbose export json json-pretty json-see cat) + _describe -t output 'output mode' _output_opts || compadd "$@" +} + + +(( $+functions[_systemctl_command] )) || _systemctl_command() +{ + local -a _systemctl_cmds + _systemctl_cmds=( + "list-units:List units" + "start:Start (activate) one or more units" + "stop:Stop (deactivate) one or more units" + "reload:Reload one or more units" + "restart:Start or restart one or more units" + "condrestart:Restart one or more units if active" + "try-restart:Restart one or more units if active" + "reload-or-restart:Reload one or more units if possible, otherwise start or restart" + "force-reload:Reload one or more units if possible, otherwise restart if active" + "hibernate:Hibernate the system" + "hybrid-sleep:Hibernate and suspend the system" + "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active" + "isolate:Start one unit and stop all others" + "kill:Send signal to processes of a unit" + "is-active:Check whether units are active" + "is-failed:Check whether units are failed" + "status:Show runtime status of one or more units" + "show:Show properties of one or more units/jobs or the manager" + "reset-failed:Reset failed state for all, one, or more units" + "load:Load one or more units" + "list-unit-files:List installed unit files" + "enable:Enable one or more unit files" + "disable:Disable one or more unit files" + "reenable:Reenable one or more unit files" + "preset:Enable/disable one or more unit files based on preset configuration" + "help:Show documentation for specified units" + "list-dependencies:Show unit dependency tree" + "mask:Mask one or more units" + "unmask:Unmask one or more units" + "link:Link one or more units files into the search path" + "is-enabled:Check whether unit files are enabled" + "list-jobs:List jobs" + "cancel:Cancel all, one, or more jobs" + "dump:Dump server status" + "snapshot:Create a snapshot" + "delete:Remove one or more snapshots" + "show-environment:Dump environment" + "set-environment:Set one or more environment variables" + "unset-environment:Unset one or more environment variables" + "daemon-reload:Reload systemd manager configuration" + "daemon-reexec:Reexecute systemd manager" + "default:Enter system default mode" + "rescue:Enter system rescue mode" + "emergency:Enter system emergency mode" + "halt:Shut down and halt the system" + "suspend:Suspend the system" + "poweroff:Shut down and power-off the system" + "reboot:Shut down and reboot the system" + "kexec:Shut down and reboot the system with kexec" + "exit:Ask for user instance termination" + ) + + if (( CURRENT == 1 )); then + _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@" + else + local curcontext="$curcontext" + + cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}" + # Deal with any aliases + case $cmd in + condrestart) cmd="try-restart";; + force-reload) cmd="reload-or-try-restart";; + esac + + if (( $#cmd )); then + curcontext="${curcontext%:*:*}:systemctl-${cmd}:" + + local update_policy + zstyle -s ":completion:${curcontext}:" cache-policy update_policy + if [[ -z "$update_policy" ]]; then + zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy + fi + + _call_function ret _systemctl_$cmd || _message 'no more arguments' + else + _message "unknown systemctl command: $words[1]" + fi + return ret + fi +} + +__systemctl() +{ + local -a _modes + _modes=("--user" "--system") + systemctl ${words:*_modes} --full --no-legend --no-pager "$@" +} + + +# Fills the unit list +_systemctl_all_units() +{ + if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) && + ! _retrieve_cache SYS_ALL_UNITS; + then + _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) ) + _store_cache SYS_ALL_UNITS _sys_all_units + fi +} + +# Fills the unit list including all file units +_systemctl_really_all_units() +{ + local -a all_unit_files; + local -a really_all_units; + if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) && + ! _retrieve_cache SYS_REALLY_ALL_UNITS; + then + all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) ) + _systemctl_all_units + really_all_units=($_sys_all_units $all_unit_files) + _sys_really_all_units=(${(u)really_all_units}) + _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units + fi +} + +_filter_units_by_property() { + local property=$1 value=$2 ; shift ; shift + local -a units ; units=($*) + local prop unit + for ((i=1; $i <= ${#units[*]}; i++)); do + # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for + # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to + # revert to calling 'systemctl show' once for all units, which is way + # faster + unit=${units[i]} + prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"} + if [[ "${prop}" = "$property=$value" ]]; then + echo " ${unit}" + fi + done +} + +_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )} +_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" || $c == "failed" ]] && echo " $a"; done; }) )} +_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo " $a"; done; }) )} +_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo " $a"; done; }) )} +_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo " $a"; done; }) )} +_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo " $a"; done; }) )} + +# Completion functions for ALL_UNITS +for fun in is-active is-failed is-enabled status show mask preset help list-dependencies ; do + (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() + { + _systemctl_really_all_units + compadd "$@" -a - _sys_really_all_units + } +done + +# Completion functions for ENABLED_UNITS +for fun in disable reenable ; do + (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() + { + _systemctl_enabled_units + _systemctl_disabled_units + compadd "$@" -a - _sys_enabled_units _sys_disabled_units + } +done + +# Completion functions for DISABLED_UNITS +(( $+functions[_systemctl_enable] )) || _systemctl_enable() +{ + _systemctl_disabled_units + compadd "$@" -a - _sys_disabled_units +} + +# Completion functions for FAILED_UNITS +(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed() +{ + _systemctl_failed_units + compadd "$@" -a - _sys_failed_units || _message "no failed unit found" +} + +# Completion functions for STARTABLE_UNITS +(( $+functions[_systemctl_start] )) || _systemctl_start() +{ + _systemctl_inactive_units + compadd "$@" -a - _sys_inactive_units +} + +# Completion functions for STOPPABLE_UNITS +for fun in stop kill try-restart condrestart ; do + (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() + { + _systemctl_active_units + compadd "$@" - $( _filter_units_by_property CanStop yes \ + ${_sys_active_units[*]} ) + } +done + +# Completion functions for ISOLATABLE_UNITS +(( $+functions[_systemctl_isolate] )) || _systemctl_isolate() +{ + _systemctl_all_units + compadd "$@" - $( _filter_units_by_property AllowIsolate yes \ + ${_sys_all_units[*]} ) +} + +# Completion functions for RELOADABLE_UNITS +for fun in reload reload-or-try-restart force-reload ; do + (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() + { + _systemctl_active_units + compadd "$@" - $( _filter_units_by_property CanReload yes \ + ${_sys_active_units[*]} ) + } +done + +# Completion functions for RESTARTABLE_UNITS +for fun in restart reload-or-restart ; do + (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() + { + _systemctl_all_units + compadd "$@" - $( _filter_units_by_property CanStart yes \ + ${_sys_all_units[*]} | while read line; do \ + [[ "$line" =~ \.device$ ]] || echo " $line"; \ + done ) + } +done + +# Completion functions for MASKED_UNITS +(( $+functions[_systemctl_unmask] )) || _systemctl_unmask() +{ + _systemctl_masked_units + compadd "$@" -a - _sys_masked_units || _message "no masked unit found" +} + +# Completion functions for JOBS +(( $+functions[_systemctl_cancel] )) || _systemctl_cancel() +{ + compadd "$@" - $(__systemctl list-jobs \ + | cut -d' ' -f1 2>/dev/null ) || _message "no job found" +} + +# Completion functions for SNAPSHOTS +(( $+functions[_systemctl_delete] )) || _systemctl_delete() +{ + compadd "$@" - $(__systemctl list-units --type snapshot --all \ + | cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found" +} + +# Completion functions for ENVS +for fun in set-environment unset-environment ; do + (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() + { + local fun=$0 ; fun=${fun##_systemctl_} + local suf + if [[ "${fun}" = "set-environment" ]]; then + suf='-S=' + fi + + compadd "$@" ${suf} - $(systemctl show-environment \ + | while read line; do echo " ${line%%\=}";done ) + } +done + +(( $+functions[_systemctl_link] )) || _systemctl_link() { _files } + +# no systemctl completion for: +# [STANDALONE]='daemon-reexec daemon-reload default dump +# emergency exit halt kexec list-jobs list-units +# list-unit-files poweroff reboot rescue show-environment' +# [NAME]='snapshot load' + +_systemctl_caching_policy() +{ + local _sysunits + local -a oldcache + + # rebuild if cache is more than a day old + oldcache=( "$1"(mh+1) ) + (( $#oldcache )) && return 0 + + _sysunits=($(__systemctl --all | cut -d' ' -f1)) + + if (( $#_sysunits )); then + for unit in $_sysunits; do + [[ "$unit" -nt "$1" ]] && return 0 + done + fi + + return 1 +} + +_list_fields() { + local -a journal_fields + journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC} + ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID} + _{P,U,G}ID _COMM _EXE _CMDLINE + _AUDIT_{SESSION,LOGINUID} + _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID} + _SYSTEMD_USER_UNIT + _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP + _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT + _KERNEL_{DEVICE,SUBSYSTEM} + _UDEV_{SYSNAME,DEVNODE,DEVLINK} + __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP) + _describe 'possible fields' journal_fields +} + +_journal_none() { + local -a _commands _files + _commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} ) + _alternative : \ + 'files:/dev files:_files -W /dev -P /dev/' \ + "commands:commands:($_commands[@])" \ + 'fields:fields:_list_fields' +} + +_journal_fields() { + local -a _fields cmd + cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" ) + _fields=( ${(f)"$(_call_program fields $cmd[@])"} ) + typeset -U _fields + _describe 'possible values' _fields +} + + +_loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo " $a"; done; }) )} +_loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo " $a"; done; }) )} +_loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo " $a"; done; }) )} + +# Completion functions for SESSIONS +for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do + (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() + { + _loginctl_all_sessions + compadd "$@" -a - _sys_all_sessions + } +done + +# Completion functions for USERS +for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do + (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() + { + _loginctl_all_users + compadd "$@" -a - _sys_all_users + } +done + +# Completion functions for SEATS +(( $+functions[_loginctl_seats] )) || _loginctl_seats() +{ + _loginctl_all_seats + compadd "$@" -a - _sys_all_seats +} +for fun in seat-status show-seat terminate-seat ; do + (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() + { _loginctl_seats } +done + +# Completion functions for ATTACH +(( $+functions[_loginctl_attach] )) || _loginctl_attach() +{ + _loginctl_all_seats + + _arguments -w -C -S -s \ + ':seat:_loginctl_seats' \ + '*:device:_files' +} + +# no loginctl completion for: +# [STANDALONE]='list-sessions list-users list-seats flush-devices' + +(( $+functions[_loginctl_command] )) || _loginctl_command() +{ + local -a _loginctl_cmds + _loginctl_cmds=( + "list-sessions:List sessions" + "session-status:Show session status" + "show-session:Show properties of one or more sessions" + "activate:Activate a session" + "lock-session:Screen lock one or more sessions" + "unlock-session:Screen unlock one or more sessions" + "terminate-session:Terminate one or more sessions" + "kill-session:Send signal to processes of a session" + "list-users:List users" + "user-status:Show user status" + "show-user:Show properties of one or more users" + "enable-linger:Enable linger state of one or more users" + "disable-linger:Disable linger state of one or more users" + "terminate-user:Terminate all sessions of one or more users" + "kill-user:Send signal to processes of a user" + "list-seats:List seats" + "seat-status:Show seat status" + "show-seat:Show properties of one or more seats" + "attach:Attach one or more devices to a seat" + "flush-devices:Flush all device associations" + "terminate-seat:Terminate all sessions on one or more seats" + ) + + if (( CURRENT == 1 )); then + _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@" + else + local curcontext="$curcontext" + + cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}" + + if (( $#cmd )); then + curcontext="${curcontext%:*:*}:loginctl-${cmd}:" + + _call_function ret _loginctl_$cmd || _message 'no more arguments' + else + _message "unknown loginctl command: $words[1]" + fi + return ret + fi +} + +_hostnamectl_command() { + local -a _hostnamectl_cmds + _hostnamectl_cmds=( + "status:Show current hostname settings" + "set-hostname:Set system hostname" + "set-icon-name:Set icon name for host" + ) + if (( CURRENT == 1 )); then + _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@" + else + local curcontext="$curcontext" + cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}" + if (( $#cmd )); then + [[ $cmd == status ]] && msg="no options" || msg="options for $cmd" + _message "$msg" + else + _message "unknown hostnamectl command: $words[1]" + fi + fi +} + +_localectl_set-locale() { + local -a _confs _locales + local expl suf + _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} ) + _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} ) + if [[ -prefix 1 *\= ]]; then + local conf=${PREFIX%%\=*} + compset -P1 '*=' + _wanted locales expl "locales configs" \ + _combination localeconfs confs=$conf locales "$@" - + else + compadd -S '=' $_confs + fi +} + +_localectl_set-keymap() { + local -a _keymaps + _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} ) + if (( CURRENT <= 3 )); then + _describe keymaps _keymaps + else + _message "no more options" + fi +} + +_localectl_set-x11-keymap() { + if (( $+commands[pkg-config] )); then + local -a _file _layout _model _variant _options + local _xorg_lst + _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"} + _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} ) + _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} ) + _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} ) + _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} ) + _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} ) + #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} ) + #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} ) + #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} ) + #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} ) + + case $CURRENT in + 2) _describe layouts _layout ;; + 3) _describe models _model;; + 4) _describe variants _variant;; + 5) _describe options _options;; + *) _message "no more options" + esac + fi +} + + +_localectl_command() { + local -a _localectl_cmds + _localectl_cmds=( + 'status:Show current locale settings' + 'set-locale:Set system locale' + 'list-locales:Show known locales' + 'set-keymap:Set virtual console keyboard mapping' + 'list-keymaps:Show known virtual console keyboard mappings' + 'set-x11-keymap:Set X11 keyboard mapping' + ) + if (( CURRENT == 1 )); then + _describe -t commands 'localectl command' _localectl_cmds + else + local curcontext="$curcontext" + cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}" + if (( $+functions[_localectl_$cmd] )); then + _localectl_$cmd + else + _message "no more options" + fi + fi +} + +_timedatectl_set-timezone(){ + local -a _timezones + _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} ) + compadd "$_timezones[@]" +} + +_timedatectl_set-time(){ + _message "YYYY-MM-DD HH:MM:SS" +} + +_timedatectl_set-local-rtc(){ + local -a _options + _options=( + '0:Maintain RTC in universal time' + '1:Maintain RTC in local time' + ) + _describe options _options +} + +_timedatectl_set-ntp(){ + local -a _options + _options=( + '0:Disable NTP based network time configuration' + '1:Enable NTP based network time configuration' + ) + _describe options _options +} + +_timedatectl_command(){ + local -a _timedatectl_cmds + _timedatectl_cmds=( + 'status:Show current time settings' + 'set-time:Set system time' + 'set-timezone:Set system timezone' + 'list-timezones:Show known timezones' + 'set-local-rtc:Control whether RTC is in local time' + 'set-ntp:Control whether NTP is enabled' + ) + if (( CURRENT == 1 )); then + _describe -t commands 'timedatectl command' _timedatectl_cmds + else + local curcontext="$curcontext" + cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}" + if (( $#cmd )); then + if (( $+functions[_timedatectl_$cmd] )); then + _timedatectl_$cmd + else + _message "no more options" + fi + else + _message "unknown timedatectl command: $words[1]" + fi + fi +} +_systemd-coredumpctl_command(){ + local -a _systemd_coredumpctl_cmds + _systemd_coredumpctl_cmds=( + 'list:List available coredumps' + 'dump:Print coredump to std' + ) + if (( CURRENT == 1 )); then + _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds + else + local curcontext="$curcontext" + local -a _dumps + cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}" + if (( $#cmd )); then + # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid + _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" ) + if [[ -n "$_dumps" ]]; then + _describe -t pids 'coredumps' _dumps + else + _message "no coredumps" + fi + else + _message "no more options" + fi + + fi + +} + +(( $+functions[_machinectl_command] )) || _machinectl_command() +{ + local -a _machinectl_cmds + _machinectl_cmds=( + "list:List currently running VMs/containers" + "status:Show VM/container status" + "show:Show properties of one or more VMs/containers" + "terminate:Terminate one or more VMs/containers" + "kill:Send signal to process or a VM/container" + ) + if (( CURRENT == 1 )); then + _describe -t commands 'machinectl command' _machinectl_cmds || compadd "$@" + else + local curcontext="$curcontext" + cmd="${${_machinectl_cmds[(r)$words[1]:*]%%:*}}" + if (( $#cmd )); then + case $cmd in + list) msg="no options" ;; + *) + _machines=( "${(foa)$(machinectl list | awk '{print $1}')}" ) + if [[ -n "$_machines" ]]; then + _describe 'machines' _machines + else + _message 'no machines' + fi + esac + else + _message "no more options" + fi + fi +} + +_udevadm_info(){ + _arguments \ + '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \ + '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \ + '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \ + '--root[Print absolute paths in name or symlink query.]' \ + '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \ + '--export[Print output as key/value pairs.]' \ + '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \ + '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \ + '--export-db[Export the content of the udev database.]' \ + '--cleanup-db[Cleanup the udev database.]' +} + +_udevadm_trigger(){ + _arguments \ + '--verbose[Print the list of devices which will be triggered.]' \ + '--dry-run[Do not actually trigger the event.]' \ + '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \ + '--action=[Type of event to be triggered.]:actions:(add change remove)' \ + '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \ + '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \ + '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \ + '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \ + '--property-match=[Trigger events for devices with a matching property value.]' \ + '--tag-match=property[Trigger events for devices with a matching tag.]' \ + '--sysname-match=[Trigger events for devices with a matching sys device name.]' \ + '--parent-match=[Trigger events for all children of a given device.]' +} + +_udevadm_settle(){ + _arguments \ + '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \ + '--seq-start=[Wait only for events after the given sequence number.]' \ + '--seq-end=[Wait only for events before the given sequence number.]' \ + '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \ + '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \ + '--help[Print help text.]' +} + +_udevadm_control(){ + _arguments \ + '--exit[Signal and wait for systemd-udevd to exit.]' \ + '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \ + '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \ + '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \ + '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \ + '--property=[Set a global property for all events.]' \ + '--children-max=[Set the maximum number of events.]' \ + '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \ + '--help[Print help text.]' +} + +_udevadm_monitor(){ + _arguments \ + '--kernel[Print the kernel uevents.]' \ + '--udev[Print the udev event after the rule processing.]' \ + '--property[Also print the properties of the event.]' \ + '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \ + '--tag-match=[Filter events by property.]' \ + '--help[Print help text.]' +} + +_udevadm_test(){ + _arguments \ + '--action=[The action string.]:actions:(add change remove)' \ + '--subsystem=[The subsystem string.]' \ + '--help[Print help text.]' \ + '*::devpath:_files -P /sys/ -W /sys' +} + +_udevadm_test-builtin(){ + if (( CURRENT == 2 )); then + _arguments \ + '--help[Print help text]' \ + '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)' + elif (( CURRENT == 3 )); then + _arguments \ + '--help[Print help text]' \ + '*::syspath:_files -P /sys -W /sys' + else + _arguments \ + '--help[Print help text]' + fi +} + +_udevadm_mounts(){ + local dev_tmp dpath_tmp mp_tmp mline + + tmp=( "${(@f)$(< /etc/mtab)}" ) + dev_tmp=( "${(@)${(@)tmp%% *}:#none}" ) + mp_tmp=( "${(@)${(@)tmp#* }%% *}" ) + + local MATCH + mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}") + dpath_tmp=( "${(@Mq)dev_tmp:#/*}" ) + dev_tmp=( "${(@q)dev_tmp:#/*}" ) + + _alternative \ + 'device-paths: device path:compadd -a dpath_tmp' \ + 'directories:mount point:compadd -a mp_tmp' +} + + +_udevadm_command(){ + local -a _udevadm_cmds + _udevadm_cmds=( + 'info:query sysfs or the udev database' + 'trigger:request events from the kernel' + 'settle:wait for the event queue to finish' + 'control:control the udev daemon' + 'monitor:listen to kernel and udev events' + 'test:test an event run' + 'test-builtin:test a built-in command' + ) + + if ((CURRENT == 1)); then + _describe -t commands 'udevadm commands' _udevadm_cmds + else + local curcontext="$curcontext" + cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}" + if (($#cmd)); then + if (( $+functions[_udevadm_$cmd] )); then + _udevadm_$cmd + else + _message "no options for $cmd" + fi + else + _message "no more options" + fi + fi +} + +_ctls "$@" + +#vim: set ft=zsh sw=4 ts=4 et -- cgit v1.2.3-54-g00ecf