Summary of changes from v171 to v172 ============================================ Bastien Nocera (3): accelerometer: add orientation property udev-acl: fix memleak accelerometer: add documentation Harald Hoyer (2): udevadm-*.c: return != 0, if unknown option given udev/udevadm-monitor.c: fixed misplaced brace Kay Sievers (33): rules: apply 'audio' group of the static snd/{seq,timer} nodes Makefile: add tar-sync rules: static_node - use 0660 if group is given to get the cigar rule-syntax-check.py: use print() make: use 'git tag' rules: run input_id for main input devices too update TODO configure: add AC_CONFIG_AUX_DIR, AC_CONFIG_SRCDIR cdrom_id: add tray lock and eject handling rules: enable in-kernel media-presence polling update TODO delete mobile-action-modeswitch which has moved to usb_modeswitch libudev: enumerate - scan /sys/module rules: move polling rule above 'block' match libudev: monitor - update doc rules: set polling value only if it is disabled libudev: device - fix udev_device_get_tags_list_entry() to always load database rules: remove redundant MODE="0664" from lp rules rules: fix wrong wildcard match, we always need a ':*' at the end libudev: device - export udev_device_has_tag() path_id: add missing '-' to tape suffix path_id: add ID_PATH_TAG= to be used in udev tags enforce valid TAG+= names update TODO libudev: device - add udev_device_has_tag() to libudev.h and gtk-doc libudev: enumerate - add udev_enumerate_add_match_parent() libudev: enumerate - include parent device itself with match_parent() libudev: enumerate - clarify documentation path_id: recognize ACPI parent devices rules: input - call path_id for ACPI devices udevadm: monitor - use uptime to match the kernel's timestamp libudev: ctrl - move code to udev directory update sd-daemon.[ch] Keshav P.R (1): rules: support for gpt partition uuid/label Lee, Chun-Yi (1): Support more MSI notebook by using asterisk on dmi vendor name Marco d'Itri (1): Add missing commas to 95-keymap.rules Martin Pitt (3): keymap: Add Microsoft Natural Keyboard keymap: Add force-release quirk for Hannspree SN10. keymap: Add slight name variations of Toshiba Satellites Peter Jones (1): ata_id: show the error message when HDIO_GET_IDENTITY fails Summary of changes from v170 to v171 ============================================ Kay Sievers (17): libudev: export symbols explicitely and individually from C code not from separate file or prefix match libudev: device - make a bunch of symbols static systemd: Replace Requires= with Wants=, run trigger in parallel systemd: sort trigger after socket systemd: trigger - run after udev.service (for now) systemd: set socket buffer size to 128 MB like udev has update TODO update TODO libudev: monitor - use SOCK_NONBLOCK systemd: split socket file systemd: add missing socket files rules: fix whitespace rules: implement TAGS== match libudev: enumerate - do not ignore other matches when add_match_tag() is used rules: support substitutions in TAG= path_id: allow to be asked about usb_devices not only usb_interfaces systemd: run udev.service and udev-trigger.service in parallel Scott James Remnant (1): configure: allow usb.ids location to be specified Summary of changes from v169 to v170 ============================================ Kay Sievers (1): libudev: ctrl - properly wait for incoming message after connect Michal Soltys (1): configure.ac: fixes for rule_generator and modeswitch Summary of changes from v168 to v169 ============================================ Kay Sievers (26): simplify rules file overwrite logic libudev: list - use bit flags for 'sort' and 'unique' libudev: queue - _unref() should return the object remove dead fstab_import files hid2hci: prepare move to bluez package set event timeout to 60 sec and settle timeout to 120 udevd: improve error message in case exec() fails configure: allow to enable/disable extras individually delete hid2hci which moved to the bluez tree update TODO/NEWS bump requirement to Linux kernel 2.6.32 and ARM 2.6.36 libudev: ctrl - log accept4() errors update NEWS update INSTALL, NEWS, configure comment, queue doc update TODO udevd: create queue file before daemonizing to reliably block 'settle' udevd: remove left-over SIGALRM gudev: silent gtk-doc warnings cdrom_id: remove unused --export switch to silent gcc libudev: queue - always rebuild queue file when nothing is queued anymore libudev: device - use DEVMODE from kernel as the default mode update TODO Merge branch 'docs/udev.xml' of git://github.com/mfwitten/udev udate TODO, NEWS, INSTALL build: use --gc-sections, -fvisibility=hidden udevadm: settle: wake up more often if --seq-start= or --exit-if-exists= is used Koen Kooi (1): configure: reintroduce introspection flags to fix crosscompilation Michael Witten (36): Docs: udev.xml: Offset daemon name with commas Docs: udev.xml: Remove commas (and unnecessary repetition) Docs: udev.xml: `are' -> `is'; the subject is `Access' Docs: udev.xml: Use present tense Docs: udev.xml: Clarification through proper wording Docs: udev.xml: `,' -> `;' Docs: udev.xml: `key value' -> `key-value' Docs: udev.xml: `,' -> `:' Docs: udev.xml: Use `assignment' consistently Docs: udev.xml: `comma-separated' is a better description Docs: udev.xml: Remove unnecessary repitition Docs: udev.xml: Add a few more words for context Docs: udev.xml: Use `unless' for clarity Docs: udev.xml: Clarify PROGRAM key Docs: udev.xml: `a shell style' -> `shell-style' Docs: udev.xml: Clean `*' description Docs: udev.xml: Clean character range description Docs: udev.xml: Clean up description of NAME assignment key Docs: udev.xml: Clean up description of SYMLINK assignment key Docs: udev.xml: Clean up description of ENV assignment key Docs: udev.xml: Clean up description of RUN assignment key Docs: udev.xml: Clean up description of LABEL assignment key Docs: udev.xml: Add missing `.' Docs: udev.xml: `which' -> `content of which' Docs: udev.xml: `commandline' -> `command line' Docs: udev.xml: Clean up WAIT_FOR description Docs: udev.xml: `a' -> `the' Docs: udev.xml: Clean up introduction to substitutions. Docs: udev.xml: Use normal sentence structure Docs: udev.xml: Actually make a separate paragraph Docs: udev.xml: Add comma Docs: udev.xml: `char' -> `character' Docs: udev.xml: `comma-separated' is a better description Docs: udev.xml: Clarify through a change in word ordering Docs: udev.xml: Improved word order Docs: udev.xml: Fix dangling modifier Nix (1): libudev: queue - accept NULL passed into udev_queue_export_cleanup() Summary of changes from v167 to v168 ============================================ David Zeuthen (1): Run ata_id on non-removable USB devices Harald Hoyer (1): udevd: clarify worker exit status Kay Sievers (35): version bump systemd: let settle depend on trigger, do not block basic with trigger selinux: do not label files in runtime dir selinux: firmware - do not label files in runtime dir udevadm: control - add --exit trivial cleanups udevd: log warning if /run is not writable libudev: ctrl - fix refcounting in connection handling udevadm: settle - watch queue file libudev: bump revision udevadm: info --cleanup-db udevd: do not nice processes "db_persist=" -> "db_persist" udevd: move OOM disable into --daemon option systemd: add OOMScoreAdjust=-1000 require explicit "db_persist" to exclude device info from --db-cleanup udevd: get netlink socket from systemd fix more warnings libudev: ctrl, monitor - use SOCK_NONBLOCK systemd: socket -> sockets udevadm: monitor - use epoll libudev: test - use epoll udevadm: test - use printf() instead of info() for non-debug output use 'else if' in epoll event array loop libudev: run_program() - select() -> epoll udevd: ppoll() -> epoll + signalfd Merge branch 'docs/README' of git://github.com/mfwitten/udev timeout handling without alarm() udevadm: settle - kill alarm() udevd: netif rename - use ifindex for temporary name udevd: always use udevd[] log prefix udevd: rules files - accept empty or /dev/null links udevd: log signal number when spawned processes fail systemd: Reqires= -> Wants=udev.socket udevd, udev-event: sync waitpid() error handling Lee, Chun-Yi (1): Add rule for Acer Aspire One ZG8 to use acer-aspire_5720 keymap Leonid Antonenkov (1): rule-generator: net - ignore Hyper-V virtual interfaces Martin Pitt (3): Revert "Do not build extras with --disable-extras" Avoid spinning up CD on pressing eject button keymap: Another ID for Logitech Wave keyboard Michael Reed (1): path_id: rework SAS device handling Michael Witten (12): Docs: README: `to replace' -> `replacing' Docs: README: `,' -> `;' Docs: README: Clean up a sentence Docs: README: Use present tense Docs: README: Add missing `and' Docs: README: Remove commas and use subjective mood Docs: README: Clean up `udev extras' requirements Docs: README: Clarify configuration of existing devices Docs: README: `does never apply' -> `never applies' Docs: README: Flip sentence structure to improve wording Docs: README: `set up' is the verb; `setup' is a noun Docs: README: Add a comma to offset the modifier Seth Forshee (1): keymap: Support Dell Latitude XT2 tablet-mode navigation keys Thomas Egerer (1): udevd: add 'N:' to optstring in getopt_long Summary of changes from v166 to v167 ============================================ Andrey Borzenkov (1): udev-acl: add /dev/sgX nodes for CD-ROM David Zeuthen (1): cdrom_id: Don't ignore profiles when there is no media available Harald Hoyer (2): cdrom_id: cd_media_toc() extend toc size to 65536 udev-acl/70-acl.rules: tag ID_REMOTE_CONTROL with acl Kay Sievers (29): version bump Merge branch 'master' of git+ssh://master.kernel.org/pub/scm/linux/hotplug/udev v4l_id: kill the v4l1 ioctl v4l_id: remove left-over variable update some comments test-libudev: add short options libudev: udev_device_get_sysattr_list_entry() update libudev: resolve ifindex in udev_device_new_from_id_filename() libudev: bump minor version udev-acl: move sg rule to optical drive rule move /dev/.udev/ to /dev/.run/udev/ and convert old udev database at udevd startup NEWS: clarify /dev/.run/ requirements input_id: silent gcc warnings fstab_import: disable build systemd: remove deprecated udev-retry.service fstab_import: remove from configure update sd-daemon.[ch] udevd: use facility == LOG_DAEMON when writing to /dev/kmsg udevd: initialize fds, for proper close() on exit use /run/udev/ if possible and fall back to /dev/.udev/ rules: run ata_id only on SPC-3 or later optical drives systemd: bind udev control socket in systemd and split udev.service systemd: use sockets.target not socket.target man: remove trigger --type=failed handling libudev: export udev_get_run_path() libudev: docs - add udev_get_run_path() libudev: make valgrind happy systemd: do not enable udev-settle.service by default systemd: udev.socket - disable implicit dependencies Kei Tokunaga (1): udevadm: enumerate - update prev pointer properly Lee, Chun-Yi (2): Remap Acer WMI touchpad toggle key to F21 used by X Remap MSI Laptop touchpad on/off key to F22 and F23 Martin Pitt (12): 60-persistent-input.rules: Support multiple interfaces Only build v4l_id if V4L1 header file is available 60-persistent-input.rules: Do not create duplicate links Fix building with --disable-extras Do not build extras with --disable-extras v4l_id: Drop videodev.h check again keymap: Fix Acer Aspire 5920G media key input_id: Consistently use tabs for indentation input_id: Add some debugging output input_id: Avoid memory overflow with too long capability masks input_id: Cover key devices which only have KEY_* > 255 input_id: Rewrite debug logging to use standard udev info() Seth Forshee (1): keymap: continue reading keymap after invalid scancodes Thomas Egerer (3): libudev: allow to get list of all available sysfs attrs for a device libudev: use sysfs attr ilist interface for attribute walk udevadm: info - make attribute array static and const Summary of changes from v165 to v166 ============================================ Chris Bagwell (1): Remap Eee PC touchpad toggle key to F21 used by X Gerd Hoffmann (1): extras: add rules for qemu guests Jürgen Kaiser (1): keymap: Add Acer Aspire 8930 Kay Sievers (7): version bump man: generate html pages for www.kernel.org man: fix typo make: fix qemu rules file name extras: qemu - fix typo ata_id: do not print empty serial numbers to avoid unwanted trailing '_' update gitignore Martin Pitt (6): keymap: Add Acer TravelMate C310 keymap: Update README.keymap.txt keymap: Add Lenovo ThinkPad X201 tablet keymap: Move reading of event in separate function keymap: More robust state machine keymap: Explain how to end the program Matthew Garrett (1): keymap: Remove wlan from Dell Summary of changes from v164 to v165 ============================================ Andy Whitcroft (1): keymap: Add release quirks for two Zepto Znote models and AMILO Xi 2428 Bastien Nocera (2): keymap: Add force release for HP touchpad off extras/keymap: Make touchpad buttons consistent David Henningsson (1): Add ACLs for FFADO supported sound cards David Zeuthen (6): ata_id: Support SG_IO version 4 interface Run scsi_id and ata_id on the scsi_device object Use ata_id, not scsi_id, on ATAPI devices Add GUdevEnumerator type and Device.get_tags() method Add g_udev_device_get_is_initialized() method gudev: Add Device.get_usec_since_initialized Harald Hoyer (2): udev-rules.c: change import property buffer to 16384 bytes 70-acl.rules: add ACLs for ID_PDA devices Jakub Wilk (1): man: udev - workaraound -> workaround Jan Drzewiecki (1): cdrom_id: Fix media state for unreadable DVDs Kay Sievers (19): version bump rules: 78-sound-card - remove specific hardware matches, they do not belong here rules: drop OSS audio rule rules: drop alsa jack-plug input devices rules: revert bsg use until the event ordering problem is sorted out libudev: do not overwrite path with readlink() call udevadm: info - honor --export and --export-prefix for property query udevadm: info - honor --export, --export-prefix= udevd: use dev_t or netif ifindex as database key udevd: always create /dev/{char,block}/$major:$minor udevd: simplify udev database and fix DEVNAME handling udevd: switch to common id_filename functions udevd: write full database file for (unsupported) renamed device nodes check ifindex > 0 instead of subsystem == "net" libudev: enumerate - allow to filter-out not-already-initialized devices libudev: fix renamed device nodes detection logic libudev: record and export "age" of device record gudev: bump minor version update NEWS Martin Pitt (5): keymap: Add Sony Vaio VGN71 keymap: Add some more Sony Vaio VGN-* models Add ACL for media player USB devices keymap: Fix struck Touchpad key on Dell Latitude E series keymap: Fix struck Touchpad key on Dell Precision M series Michal Soltys (1): udevd: create static nodes before /dev/null is needed Summary of changes from v163 to v164 ============================================ David Zeuthen (1): Install libgudev-1.0.so in prefix / instead of prefix /usr Harald Hoyer (1): cdrom_id: request the drive profile features with a dynamic length Kay Sievers (4): version bump udevd: do not wrongly delay events for devices with swapped names return proper error code in rename_netif() libudev: return kernel provided devnode when asked before we handled any rules Martin Pitt (2): keymap: Apply force-release rules to all Samsung models. keymap: Add Toshiba Satellite U500 Summary of changes from v162 to v163 ============================================ David Zeuthen (2): gudev: Deliver ::uevent signal in the thread-default main loop Bump required GLib version to 2.22 Hannes Reinecke (1): scsi_id: export target port group Kay Sievers (5): version bump scsi_id: fix compiler warnings systemd: hook into basic.target instead of sysinit.target systemd: sort before basic.target udevd: add sd-daemon.c Lee, Chun-Yi (1): keymap: Add alternate MSI vendor name Martin Pitt (8): keymap: Add Lenovo Y550 Clarify WAIT_FOR documentation fix various syntax errors in rules Add automatic rules syntax check cdrom_id: Try reading the medium if all MMC commands fail Revert "cdrom_id: Try reading the medium if all MMC commands fail" cdrom_id: Fall back to CDROM_DRIVE_STATUS if all MMC commands fail cdrom_id: Don't read beyond "last track" in TOC Torsten Schoenfeld (1): gudev: add a few annotations that newer gobject-introspection versions demand Summary of changes from v161 to v162 ============================================ David Woodhouse (1): Add keymap for Lenovo IdeaPad S10-3 Jan Drzewiecki (2): cdrom_id: Drop MEDIA_SESSION_NEXT for DVD-RW-RO cdrom_id: Fix DVD blank detection for sloppy firmware Kay Sievers (10): init: update systemd service files init: update systemd service files init: add 'udev -' to description in systemd service files udevd: add pid to kmsg logs init: edit systemd service descriptions version bump udevd: remove unneeded credential passing from init_notify() set SELinux context on 'add' but not on 'change' events systemd: enable all udev services unconditionally Revert "Add alternative KVM MAC address blacklist" Luca Tettamanti (1): Add support for oom_score_adj Marco d'Itri (2): udev-acl: do not mistake all SCSI "processor" devices for scanner do not create persistent name rules for KVM network interfaces Martin Pitt (12): cdrom_id: Add media status debugging udev(7): Point out required extension, and remove some confusion keymap: Add Onkyo PC keymap: Add HP G60 keymap: Fix Sony VAIO VGN-SZ2HP/B udev(7) manpage: Fix description of $attr gudev: fix crash if netlink is not available keymap: Fix Acer TravelMate 4720 cdrom_id: Fix DVD-RW media detection Fix KVM MAC address range do not create persistent name rules for VMWare network interfaces Add alternative KVM MAC address blacklist Michael Forney (1): Don't install systemd scripts with --without-systemdsystemunitdir Michal Soltys (1): ChangeLog fix Summary of changes from v160 to v161 ============================================ Fortunato Ventre (1): keymap: Add force-release quirks for a lot more Samsung models Harald Hoyer (3): udev-event.c: rename interface to -, if taken rule_generator/write_net_rules: prevent interface to be named "eth" cdrom_id: READ TOC before READ DISC INFORMATION fixes qemu Jan Drzewiecki (5): cdrom_id: Fix detection of reblanked DVD+RW and DVD-RAM cdrom_id: Handle pre-MMC2 drives cdrom_id: Also apply format check to DVD-RW cdrom_id: No "next session" for "other" media state cdrom_id: Fix state for fresh DVD-RW Jerone Young (1): Fix volume keys not releasing on Mivvy G310 Kay Sievers (12): version bump rules: remove firewire rules for deprecated drivers udev-acl: update firewire matches to recent rule changes libudev: bump minor so version after adding symbols call util_delete_path() only when we actually deleted stuff udev-acl: properly handle CK change events for root user udev-acl: remove specific device matches from the rules file fix broken "compile warning fix" always log error when renaming a network interface fails do not rename the database on device rename cdrom_id: whitespace fix cdrom_id: do not bail out when we can not read the TOC like for empty CDRW Marco d'Itri (3): hid2hci: fix Logitech diNovo, MX5500 and other keyboards log an error when a message from the wrong version of udevadm is ignored hid2hci: fix for Logitech diNovo Edge keyboard Martin Pitt (1): keymap: Generalize Samsung keymaps Michal Schmidt (1): udev-acl: really fix ACL assignment in CK events Richard Hughes (1): udev-acl: add DDC_DEVICE to the types that are managed Stefan Richter (1): rules: add more FireWire IDs: Point Grey IIDC; AV/C + vendor unique Yin Kangkai (7): udevadm: fix short options in getopt() udevd: fix some memory leaks in error path malloc()+memset() -> calloc() udevd: fix short options in getopt() udevd: fix unref'ing of device in error path udevd: create static device links only when the target exists udev: fix compile warning Summary of changes from v159 to v160 ============================================ Harald Hoyer (2): 60-persistent-storage-tape: s/path_id.sh/path_id/ 60-persistent-storage-tape.rules: make own by-path symlink for nst tapes Kay Sievers (4): version bump rules: tape - remove WAIT_FOR instruction and don't export BSG_DEV allow final assignment for OPTIONS:="nowatch" udevd: init_notify() fix abstract namespace name handling Lennart Poettering (1): systemd: make service files readable by GKeyFile Martin Pitt (2): keymap: Find alternate Lenovo module keymap: Add Lenovo ThinkPad SL Series extra buttons Summary of changes from v158 to v159 ============================================ Jerone Young (1): Fix stuck volume key presses for Toshiba Satellite U300 & U305models Kay Sievers (5): version bump add systemd service files make: pre-process and install systemd service files when needed make: fix 'make distcheck' switch a few left-over from GPLv2 to GPLv2 or later Lennart Poettering (1): systemd: update service files for newly introduced DefaultDependencies= option Martin Pitt (1): keymap: Add Logitech Cordless Wave Pro Matthew Garrett (1): keymap: Add support for IBM-branded USB devices Michael Meeks (1): gudev: respect possibly given LD_LIBRARY_PATH Ryan Harper (2): Add virtio-blk support to path_id Add virtio-blk by-id rules based on 'serial' attribute Summary of changes from v157 to v158 ============================================ Harald Hoyer (1): extras/keymap: add Samsung N210 to keymap rules Kay Sievers (7): version bump libudev: fix fd leak in udev_enumerate_scan_devices() when tags are searched udevd: in case we don't daemonize, send READY message to /sbin/init delete last distro specific rules remove a few comments in file headers mtd_probe: add needed include, modprobe blacklist flag, and change some whitespace rules: remove unused subdir Martin Pitt (4): Fix hid2hci rules harder add Vala vapi for gudev-1.0 Revert "add Vala vapi for gudev-1.0" Fix usb printer rule for multiple USB interfaces Maxim Levitsky (1): mtd_probe: add autodetection for xD cards Paul Bender (1): configure.ac: fix cross compilation Summary of changes from v156 to v157 ============================================ Harald Hoyer (1): 40-redhat.rules: removed file Jerone Young (3): Fix wlan key on Inspirion 1210 Fix wlan key on Inspiron 910 Fix wlan key on Inspiron 1010 & 1110 Kay Sievers (25): configure.ac: version bump Makefile.am: silent build mkdir rules: mount fuse control filesystem fix compilation with --enable-debug while (1) -> for (;;) childs -> children udevd: replace --debug-trace with --children-max udevd: fix comments rules: add -v to modprobe calls to be able see what will be loaded udevd: read debug settings from kernel commandline update NEWS rules: delete pilot rules and remove redhat directory man: add static device nodes and udevd debug options man: add kernel command line parameters man: udevd - update intro rules: rename packages -> arch rules: SUSE - move last distro rule to package rules: add misc/30-kernel-compat.rules make: mkdir /lib/udev/devices/ make: fix rules/ subdir names udevd: set umask before creating files/directories add IMPORT{cmdline} IMPORT{cmdline}: start at first char after '=' libudev: doc - fix typo update NEWS Summary of changes from v155 to v156 ============================================ Bryan Kadzban (1): udevd: fix typo /proc/fd -> /proc/self/fd Kay Sievers (4): configure.ac: version bump cdrom_id: do not export ID_CDROM_MEDIA_SESSION_LAST_OFFSET= for single session media rules: optical drives - use ID_CDROM_MEDIA_TRACK_COUNT_DATA libudev: fix udev_queue_get_seqnum_sequence_is_finished() with empty queue file Summary of changes from v154 to v155 ============================================ Kay Sievers (11): reset process priority before executing RUN+= configure.ac: version bump rules: SUSE - delete device-mapper rules libudev: add O_CLOEXEC use default mode of 0600 for nodes if gid == 0 udevd: create standard symlinks and handle /lib/udev/devices update NEWS README fix tests and allow MODE=000 create static nodes provided by kernel modules to allow module autoloading update NEWS man: directly use 'refentry' Summary of changes from v153 to v154 ============================================ Harald Hoyer (2): Makefile.am: add LGPL COPYING file to EXTRA_DIST cdrom_id: only mark sr[0-9]* as ID_CDROM Jerone Young (1): Fix volume keys not releasing for Pegatron platform Kay Sievers (23): configure.ac: version bump more readlink buffer size handling remove left-over from ignore_remove and all_partitions fix previous commit udevadm: info --export-db -- remove watch handle export add TAG= to improve event filtering and device enumeration all to match against a given TAG== udev-acl: use a tag instead of a property to mark devices fix logic on-demand loading logic for db and uevent use the usual TAG+=, TAG= logic delete old tags when configuration changes libudev: accept NULL in udev_device_get_tags_list_entry() export tag functions export udev_device_get_tags_list_entry() udevd: always try to find an idle worker instead of forking a new one remove unused parameter from udev_node_mknod() remove debug output during rules parsing warn when renaming kernel-provided nodes instead of adding symlinks man: udevadm trigger - the default is "change" not "add" update README regarding kernel version and default rules add info message when empty NAME is given libudev: add documentation for recently added functions udevd: reload config only for *.rules files Martin Pitt (1): keymap: Fix Bluetooth key on Acer TravelMate 4720 Mathias Nyman (1): remove buffer-overrun risk in readlink call Matthias Schwarzott (1): rules: Gentoo - remove old devfs compat rules Michael Thayer (1): fix device node deletion Robby Workman (1): configure.ac: move firmware-path setting out of extras section Yin Kangkai (2): keymap: Add keymap and force-release quirk for Samsung N128 keymap: Add keymap quirk of WebCam key for MSI netbooks. Summary of changes from v152 to v153 ============================================ Kay Sievers (1): configure.ac: version bump Robby Workman (1): configure.ac: fix broken firmware search path in configure.ac Summary of changes from v151 to v152 ============================================ Adrian Bunk (1): udev needs automake 1.10 Amit Shah (2): Fix virtio-ports rule to use $attr instead of $ATTR rules: virtio - fix is to check if the 'name' attribute is present Andy Whitcroft (2): keymap: Add Samsung Q210/P210 force-release quirk keymap: Add Fujitsu Amilo 1848+u force-release quirk Dan Williams (1): modeswitch: morph into tool that only switches Mobile Action cables David Zeuthen (3): Decrease buffer size when advancing past NUL byte Use UTIL_LINE_SIZE, not UTIL_PATH_SIZE to truncate properties Increase UTIL_LINE_SIZE from 2048 to 16384 Harald Hoyer (1): cdrom_id: remove debugging code Jerone Young (6): Force key release for volume keys on Dell Studio 1557 Fix Keymapping for upcoming Dell Laptops Add new Dell touchpad keycode Revert special casing 0xD8 to latitude XT only Fix Dell Studio 1558 volume keys not releasing Add support for another Dell touchpad toggle key Kamal Mostafa (3): keymap: Unite laptop models needing common volume-key release quirk keymap: Add force-release quirk for Coolbox QBook 270-02 keymap: Add force-release quirk for Mitac 8050QDA Kay Sievers (43): libudev: bump minor version udevadm: fix untested and broken commit to set buffer size configure.ac: version bump udev-acl: no not encourage use of ACL_MANAGE outside of rules file replace utimes() with utimensat() libbudev-private: rename udev_list_entry_get_flag() udevadm: monitor - use / as separator in --subsystem-match=subsystem[/devtype] use major:minor as entries in symlink stack instead of devpath use major:minor as entries in watch directory libudev: docs - .gitignore backup files firmware: fix possible segfault when firmware device goes away while loading do not reset SELinux context when the node was not touched libudev: add udev_device_new_from_environment() add LGPL COPYING to libudev and GUdev cdrom_id: open non-mounted optical media with O_EXCL libudev: update documentation extras: mobile-action-modeswitch - update gitignore scsi_id: add rand() in retry loop cdrom_id: retry to open the device, if EBUSY cdrom_id: check mount state in retry loop cdrom_id: always set ID_CDROM regardless if we can run cdrom_id rules: delete outdated packagees rules rules: we do not have static devices which are renamed unify/cleanup event handling allow IMPORT{db}="KEY" usb-db: remove double '/' replace "add|change" with "!remove" update NEWS log info only if we actually delete the node udevadm: trigger - switch default action from "add" to "change" remove "all_partitions" option rules: call modprobe on all events but "remove" remove "ignore_remove" option update NEWS cdrom_id: rework feature/profiles buffer parsing cdrom_id: print more debug messages cdrom_id: debug - print feature values in hex cdrom_id: debug - print feature values in hex cdrom_id: set ID_CDROM_MEDIA=1 only for known media Revert "Fix switching Logitech bluetooth adapters into hci mode." add O_NOFOLLOW when creating files in link stack delete only device nodes, not symlinks when deleting a devtmpfs node doc: add section about how *not* to rename device nodes Marco d'Itri (3): rules: input - create by-path/ links for pci devices Fix switching Logitech bluetooth adapters into hci mode. doc: document the WAIT_FOR timeout Martin Pitt (12): keymap: Add Dell Inspiron 1011 (Mini 10) Fix brightness keys on MSI Wind U-100 keymap: Fix LG X110 keymap: Add Toshiba Satellite M30X udev-acl: Correctly handle ENV{ACL_MANAGE}==0 input_id: Fix linking keymap: Add Acer TravelMate 6593G and Acer Aspire 1640 keymap: Fix another key for Acer TravelMate 6593 cdrom_id: Fix uninitialized variables cdrom_id: Fix uninitialized buffers cdrom_id: Do not ignore errors from scsi_cmd_run() cdrom_id: Swap media state and TOC info probing Mike Brudevold (1): cdrom_id: add missing profiles to feature_profiles Robert Hooker (1): keymap: Add support for Gateway AOA110/AOA150 clones. Scott James Remnant (2): libudev: export udev_monitor_set_receive_buffer_size() udevadm monitor: increase netlink buffer size Thomas Bächler (1): firmware: fix error reporting on missing firmware files Yury G. Kudryashov (3): configure.ac - fix typo in --with-pci-ids-path option hid2hci: include linux/types.h for __u32 configure.ac: ddd --with-firmware-path option Summary of changes from v150 to v151 ============================================ Amit Shah (1): rules: Add symlink rule for virtio ports Bryan Kadzban (1): Fix reverted floppy-device permissions Egbert Eich (1): rulews: suse - add do-not-load-KMS-modules rules Frederic Crozat (1): rules: acl - add COLOR_MEASUREMENT_DEVICE match Kay Sievers (11): configure.ac: version bump udevd: inotify - do not parse rules at create but at close do not remove device nodes of active kernel devices libudev: device - create db file atomically clarify message about not removed device node input_id: include limits.h keymap: include linux/limits.h keymap: linux/input.h - get absolute include path from gcc delete outdated and unmaintained writing_udev_rules update README and NEWS update tests Marco d'Itri (2): writing_udev_rules: update rules files names keymap: support for the Samsung N140 keyboard Martin Pitt (4): add ACL rule for Garmin GPSMap 60 keymap: move force-release directory extras/keymap/check-keymaps.sh: Ignore comment-only lines keymap: Fix invalid map line Summary of changes from v149 to v150 ============================================ Clemens Buchacher (2): add Samsung R70/R71 keymap keymap: Samsung R70/R71 force-release quirk Daniel Drake (2): keymap: Add OLPC XO key mappings keymap: Fix typo in compal rules Daniel Elstner (1): libudev: wrap in extern "C" block for C++ David Zeuthen (1): Export ID_WWN_VENDOR_EXTENSION and ID_WWN_WITH_EXTENSION Jerone Young (1): keymap: Lenovo Thinkpad USB Keyboard with Tracepoint Johannes Stezenbach (2): keymap: add Samsung N130 keymap: handle atkbd force_release quirk Kay Sievers (15): util_unlink_secure(): chmod() before chown() floppy: fix rule to create additional floppy device nodes configure.ac: version bump remove remaining support for CONFIG_SYSFS_DEPRECATED cdrom_id: remove deprecated device matches rules: add "block" match to floppy rule update mtime of nodes and links when we re-use them udevadm: info - fix info --root --query=name --path= for device without a device node remove remaining support for CONFIG_SYSFS_DEPRECATED fix typo in log message priority handling remove UDEV_RUN environment variable udevadm: logging - copy va_list and do not use it twice libudev: doc - add symbols to sections.txt work around gtk-doc which breaks distcheck gobject-introspection: use $datadir instead of $prefix Marco d'Itri (2): build: keymap - create subdir rules: udev-acl - add firewire video devices Martin Pitt (12): keymap: Add Acer Aspire 1810T 95-keymap.rules: Run on change events, too keymap: fix findkeyboards Speed up udev_enumerate_scan_* keymap: Add hotkey quirk for Acer Aspire One (AO531h/AO751h) Clarify RUN/IMPORT documentation keymap: Add Logitech S510 USB keyboard keymap: add Acer TravelMate 8471 keymap: Add Acer Aspire 1810TZ keymap: Add LG X110 keymap: Add Fujitsu Amilo Li 1718 keymap: Document force-release Piter PUNK (1): firmware: convert shell script to C Scott James Remnant (1): 70-acl.rules: ACL manage Android G1 dev phones Thomas de Grenier de Latour (1): libudev: enumerate - fix move_later logic Summary of changes from v148 to v149 ============================================ Daniel Elstner (1): really fix both in-tree and out-of-tree builds Dmitry Torokhov (1): input-id: identify touchscreens Kay Sievers (4): libudev: doc - use #NULL configure.ac: version bump really really fix both in-tree and out-of-tree builds fix both in-tree and out-of-tree builds Martin Pitt (6): input_id: Fix endless loop for non-input devices input_id: Do not tag non-input devices with ID_INPUT input_id: small optimization input_id: check event mask input_id: Check mouse button for ID_INPUT_MOUSE udev_device_get_parent_with_subsystem_devtype(): Clarify documentation Summary of changes from v147 to v148 ============================================ Dan Williams (3): Revert "modem-modeswitch: add a device" Revert "extras/modem-modeswitch: Add Huawei E1550 GSM modem" modem-modeswitch: 61-option-modem-modeswitch.rules is only for Option NV devices Daniel Mierswa (1): Fix typo in NEWS, ConsoleKit-0.4.11 -> 0.4.1 David Zeuthen (4): cdrom_id: Still check profiles even if there is no media scsi_id: Export WWN and Unit Serial Number Create /dev/disk/by-id/wwn-0x... symlinks Also create /dev/disk/by-id/wwn-0x..-part%n symlinks for partitions Dmitry Torokhov (1): extras/input_id: Correctly identify touchpads Harald Hoyer (1): modem-modeswitch: add a device Kay Sievers (8): rules: set mode of floppy device nodes to 0660 remove "ignore_device" print warning for BUS=, SYSFS{}=, ID= test-udev: remove "ignore_device" code udev-test.pl: catch-up with recent changes rules: remove support for IDE (hd*) devices ata_id: skip ATA commands if we find an optical drive Revert "Fix out-of-tree builds" Martin Pitt (5): README.keymap.txt: small clarification extras: Add input_id 70-acl.rules: Use new-style input properties input: Deprecate ENV{ID_CLASS} input_id: code cleanup Scott James Remnant (1): Fix out-of-tree builds Summary of changes from v146 to v147 ============================================ Alan Jenkins (1): udevd: queue-export - remove retry loop Andrew Church (1): fix wrong parameter size on ioctl FIONREAD Daniel Mierswa (2): don't compare a non-existing function with NULL use nanosleep() instead of usleep() David Zeuthen (4): gudev: remove G_UDEV_API_IS_SUBJECT_TO_CHANGE since API is now stable ata_id: export more advanced ATA features gudev: Fix up GUdevDeviceNumber gudev: Remove LIBUDEV_I_KNOW_THE_API_IS_SUBJECT_TO_CHANGE from priv header Florian Zumbiehl (10): util_delete_path(): use util_strscpy() util_lookup_group(): fix memory leak if realloc() fails util_delete_path(): handle multiple leading slashes util_create_path(): fix possible out of bounds array access ude_rules.c: fix possible NULL pointer dereference in get_key() util_resolve_sys_link(): fix possible buffer overflow udev_util_encode_string(): fix possible buffer overflow udev-rules.c: parse_file() - fix possible buffer overflow udev_queue_get_seqnum_sequence_is_finished(): fix possible file handle leak util_run_program(): fix possible buffer overflow #2 Harald Hoyer (2): scsi_id: prevent buffer overflow in check_fill_0x83_prespc3() rename interfaces to _rename if rename fails Jeremy Kerr (1): util_run_program: restore signal mask before executing event RUN commands Kay Sievers (45): make: sort Makefile.am per target/extra configure.ac: version bump udev-acl: allow to skip ACL handling rules: rfkill has no group, so use 0644 rule_generator: net - fix MATCHDEVID make: add comment update NEWS print warning for NAME="%k" - it breaks the kernel supplied DEVNAME warn about non-readable or empty rules file change database file names assign errno for getgrnam_r()/getpwnam_r() doc: udevadm test *does* create nodes and links these days util_unlink_secure(): chmod() before chown() util_create_path(): fix errno usage inotify_add_watch(): do not store watch, if it failed update TODO update README rules: suse - use NAME for mapper/control libudev-util.c: get_sys_link() - return error for empty link target udev-rules.c: remove 'first_token' variable Revert "udev-rules.c: remove 'first_token' variable" test: catch possible bug in GOTO resolving udevadm: remove symlink support for old commands util_run_program(): skip multiple spaces in argv creation fix whitespace require 2.6.27 for proper signalfd handling fix randonm findings from llvm-clang-analyzer simplify "symlink name stack" reorder create_path() and node/link creation to be called in a direct sequence put util_create_path() and file creastion in a retry loop udevadm: control - remove compat code scsi_id: delete copy of bsg.h fix SYMLINK{} option parsing rules: remove remaining NAME="%k" rules: drop almost all NAME= keys update TODO, NEWS udevd: serialize events for with the same major/minor break loops if util_create_path() returns error remove "last_rule" option use CLOEXEC flags instead of fcntl() unblock signals we might want to handle udevd: create /dev/.udev/rules.d/ before watching it wit inotify gudev: fix pkg-config call to work with "make distcheck" update NEWS Revert "gudev: fix out-of-tree build" Lennart Poettering (5): pci-db: make sure we actually read the pci.ids file instead of usb.ids sound: recognize saa7134 TV card sound devices as TV cards sound: include ALSA sound card id in ID_ID property sound: include ALSA sound card id in /dev/snd/by-id/ links Revert "sound: include ALSA sound card id in /dev/snd/by-id/ links" Marco d'Itri (6): doc: writing_udev_rules updated for the new command names rules: sound - do not use /usr/bin/env udevadm: print all messages to stderr with priority higher or equal than LOG_ERR udevadmi: control = exit with rc=2 if there is some system error gudev: gir-scanner workaround for out of tree builds gudev: fix out-of-tree build Mario Limonciello (1): hid2hci: remove superfluous bmAttributes match Martin Pitt (24): extras/keymap: Add Acer Aspire 6920 extras/modem-modeswitch: eject ZTE MF6xx fake CD-ROMs extras/keymap: Fix hold key on Acer Aspire 6920 extras/keymap: Fix case matching for Micro-Star Revert "extras/keymap: Fix case matching for Micro-Star" make raw USB printer devices accessible for lp modem-modeswitch rules: Match more devices extras/keymap: fix hash table collisions extras/keymap: Rename KEY_COFFEE to KEY_SCREENLOCK fix single-session CD detection fix previous commit for CD detection make raw USB printer devices world-readable again 50-udev-default.rules: fix printer MODE keymap: Add Logitech Wave USB keymap: add missing map file keymap: fix usb_id invocation keymap: make USB keyboards really work keymap: Add Logitech Wave cordless keymap: add HP Pavillion dv6315ea keymap: add HP 2230s Makefile.am: fix build with mawk extras/keymap/README.keymap.txt: Fix bug report link fix major fd leak in link handling modem-modeswitch: fix ZTE MF6xx rule Matthias Schwarzott (2): rules: Gentoo update rules: Gentoo update Maxim Levitsky (1): keymap for Acer Aspire 5720 Peter Rajnoha (1): libudev: allow to store negative values in the udev database Scott James Remnant (1): util_run_program: *really* restore signal mask before executing event RUN commands William Jon McCann (1): udev-acl: catch up with ConsoleKit 0.4.1 Summary of changes from v145 to v146 ============================================ Alan Jenkins (3): man: fix unused, inaccurate metadata man: SYMLINK can be matched as well as assigned fix spelling Anssi Hannula (2): rules: exclude digitizers from joystick class udev-acl: add joystick devices Diego Elio 'Flameeyes' Pettenò (21): Merge libudev, udev, and the unconditional extras in a single Makefile.am. Replace the custom test-run target with the standard make check. Also merge into the top-level Makefile.am the simpler extras. Change hook handling to be more portable. Merge keymap building in the top-level Makefile.am. Make keymap generation rules be silent (backward-compatible). Move pkg-config docs and man pages before conditionals. Finally, also merge gudev into the top-level Makefile.am. Make sure to clean up all the built sources. Make sure to use dependency/target variables. Add silent-rule support for the gudev rules. Fix building of introspection library on top-level Makefile.am. Fix another relative path for the new working directory. Include the correct directory for out-of-source builds. Add tests to the distribution; this fixes "make distcheck". Ask gperf to use ANSI-C for generation. Merge in Makefile.am.inc into Makefile.am Use the keymap check during “make distcheck” rather than “check”. Fix building of documentation when doing out-of-source builds. Fix “make distcheck” run outside of the source directory. Use LT_INIT to explicit that udev needs libtool series 2. Eric W. Biederman (1): fix util_lookup_group to handle large groups Erik Forsberg (1): extras/modem-modeswitch: Add Huawei E1550 GSM modem Kay Sievers (18): udevd: add timestamp to --debug output v4l_id: exit with 0 when --help is given configure.ac: version bump hid2hci: remove hid structures and include kernel header path_id: make global variable static udevadm: trigger - add --sysname-match= rules: serial - fix path_id call path_id: fix typo in comment format names are not case insensitive hid2hci: rewrite (and break) rules and device handling make: build internal tools against libudev-private.la update a few years of copyright libudev: silent gcc warning: may be used uninitialized in this function make: suppress enter/leaving directory messages re-enable failed event tracking "record_failed" -> "fail_event_on_error" udevd: block for 15 seconds after error when too old kernel is detected make: fix issues from non-recursive conversion Lennart Poettering (1): enumeration: move ALSA control devices to the end of the enumerated devices of each card Mario Limonciello (2): hid2hci: support to hid2hci for recovering Dell BT devices after S3 hid2hci: install re-trigger for hid device when recovering from S3 Martin Pitt (17): add keymap for Clevo D410J laptop extras/keymap: add Zepto ZNote extras/keymap: add Everex Stepnote XT5000T extras/keymap: add Compal Hel80i keymap tool: improve help keymap tool: support scancode/keycode pair arguments keymap: inline one-line key maps extras/keymap: fix check-keymaps.sh for inline mappings extras/keymap: add recently added keymap files to Makefile.am extras/keymap: Add HP Presario 2100 extras/keymap: cover more Compaq Evo models extras/keymap: Add Fujitsu Amilo M extras/keymap: teach findkeyboards about USB keyboards extras/keymap: Add Samsung SX22S extras/keymap: Fix crash for unknown keys extras/keymap: Add Samsung NC20 extras/keymap: Fix Bluetooth key on Acer Aspire 6920 Summary of changes from v144 to v145 ============================================ Ian Campbell (1): scsi_id: correct error handling in prepend_vendor_model Kay Sievers (10): README: add CONFIG_BLK_DEV_BSG use MIN() MAX() from param.h configure.ac: version bump libudev: device - free values before updating them libudev: enumerate - sort with qsort() udevd: detach event from worker if we kill a worker udevadm: info - add space after R:, A:, W: on database export udevd: make sure a worker finishes event handling before exiting udevd: handle SIGCHLD before the worker event message udevd: use bool Summary of changes from v143 to v144 ============================================ Jon Masters (1): firmware: search for third party or sysadmin supplied firmware updates Kay Sievers (19): configure.ac: add AM_SILENT_RULES configure.ac: version bump TODO: add cleanup of ATA_COMPAT libudev: queue - add comments for queue format udev/.gitignore: add udev.pc configure.ac: version bump do not exports properties starting with a '.' scsi_id: --reformat_serial - use udev_util_replace_whitespace() ata_id: sync ID_SERIAL(_SHORT) with other *_id tools rules: make ata_id properties the default for all ATA block devices scsi_id: delete no longer needed config file update NEWS man: udev - add private properties like ENV{.FOO}="bar" Merge branch 'firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/jcm/udev-jcm udevadm: test - print list of properties build: do not delete .la files libudev: monitor - handle kernel supplied DEVNAME properly update NEWS build: add *exec* to the internal rootlibdir name Martin Pitt (2): hid2hci: narrow matches to real HCI devices extras/udev-acl: add smartcard readers Stefan Richter (1): rules: set group ownership of new firewire driver device files Summary of changes from v142 to v143 ============================================ Alan Jenkins (5): udevadm: settle - fix timeout udevd: remove tiny bit of dead code udevd: implement a more efficient queue file format udev-selinux.c: remove libudev header udevd: queue-export - fix crash Benjamin Gilbert (1): test: check string substitutions in OWNER and GROUP Dan Williams (2): rules: tty/net - move from udev-extras extras/modem-modeswitch: move from udev-extras David Zeuthen (1): gudev: move from udev-extras Kay Sievers (95): version bump rules: v4l do not mix vbi and video nodes fix possible endless loop for GOTO to non-existent LABEL Revert "rules: v4l do not mix vbi and video nodes" rule-generator: cd - skip by-path links if we create by-id links remove format char string truncation syntax use more efficient string copying edd_id: use openat() use openat(), unlinkat(), fstatat() update TODO remove unused GL_FORMAT from rules parser require key names in uppercase keep the ifdef'd udevd testing/profiling hack fix location of database files udevadm: settle - make --timeout=0 working update NEWS rules: add SUBSYSTEM match to scsi rules cdrom_id: suppress ID_CDROM_MEDIA_STATE=blank for plain non-writable CDROM media udevadm: control - add comment to man page about --reload-rules cdrom_id: add error message if open() fails udevadm: settle - add --exit-if-exists= udevd: remove check for dev_t, DEVPATH_OLD takes care of that str[sp]cpyl: add __attribute__ ((sentinel)) udevd: convert to event worker processes udevd: close netlink socket in worker and set cloexec rules: do not call path_id for virtual devices udevd: use enum instead of char in struct declaration allow format substitution in path of ATTR{}=="" cleanup $attr{} substitution path_id: implement in C using libudev path_id: update SCSI handling path_id: add comments fix signed/unsigned warning libudev: enumerate - allow multiple keys with the same name udevadm: trigger - add --property-match=: udevadm: info - accept --query without a value and print properties udevadm: control - --env -> --property udevadm: monitor --environment -> --property path_id: handle fibre channel path_id: add iscsi support path_id: delete old shell script udevd: print error if worker dies unexpectedly path_id: rename scsi sub-fuctions libudev: add comments to libudev.h libudev: move to top-level directory fix libudev include in Makefile.am.in libudev: device_new() -> udev_device_new() udevd: log info for created/killed workers libudev: call log functions conditionally move syslog wrapper to libudev move common stuff from udev/ to private parts of libudev/ libudev: rename private files to *-private.c rules: remove scsi ch module loading rule update NEWS udevadm: info -revert "accept --query without argument" README: add kernel options README: add INOTIFY and SIGNALFD USE_LOG -> ENABLE_LOGGING, DEBUG -> ENABLE_DEBUG, USE_SELINUX -> WITH_SELINUX libudev: add gtk-doc libudev: update documentation libudev: doc - add section headers libudev: doc - add enumerate libudev: doc - add queue update TODO libudev: doc - add namespace for index libudev: move .so version to libudev Makefile autogen.sh: simplify TODO: update libudev: remove prefix from .so version variables libudev: doc - add empty libudev.types udev-acl: move from udev-extras INSTALL: add --enable-extras udev-acl: handle missing action when called in CK mode v4l_id: move from udev-extras libudev: doc - libudev-docs.sgml -> libudev-doc.xml gudev: fix typo in configure option v4l_id: 70-v4l.rules -> 60-persistent-v4l.rules configure: enable all extras by default, provide --disable-extras autogen.sh: make "CFLAGS=-O0 ./autogen.sh" working NEWS: add --disable-extras cleanup ./configure installation directory options rules: remove MMC rule, 2.6.30 has the modalias configure.ac: print error if gperf is missing libudev: install in $libdir and move later to $rootlibdir extras/keymap: use LIBEXECDIR instead /lib/udev README: add /lib/udev/ is private rules: do not install usb-id/pci-id rules when --disable-extras is used extras: delete man pages for private udev tools README: update extras/keymap: install findkeyboards in /lib/udev INSTALL: use /sbin instead of %{sbindir} NEWS: update udev.pc: add Merge branch 'master' of git+ssh://master.kernel.org/pub/scm/linux/hotplug/udev docs: install writing_udev_rules Lennart Poettering (2): rules: sound - move from udev-extra usb-db: move from udev-extras Marcel Holtmann (1): rules: make RFKILL control device world readable Mario Limonciello (1): hid2hci: move from udev-extras Martin Pitt (5): keymap: move from udev-extras extras/keymap: Fix WLAN button on ThinkPads keymap: Update findkeyboard path in docs udev-acl: Manage hplip device permissions extras/keymap: Update findkeyboards location Matthias Schwarzott (3): rules: Gentoo update rules: Gentoo update rules: Gentoo update Scott James Remnant (1): OWNER/GROUP: fix if logic Summary of changes from v141 to v142 ============================================ Andre Przywara (1): rules: create /dev/cpu//cpuid world readable Ian Campbell (1): path_id: support identification of Xen virtual block devices John Wright (1): edd_id: add cciss devices Kay Sievers (46): version bump libudev: path_encode - always return 0 if encoded string does not fit into size libudev: monitor - clarify socket handling documentation udevd: log error for too old kernels or CONFIG_SYSFS_DEPRECATED rules: remove DVB shell script update NEWS cdrom_id: add Xen cdrom support test-libudev: update monitor source TODO: add packet filter update NEWS cdrom_id: add and use ID_CDROM_MEDIA to decide if we run vol_id libudev: monitor - add client socket filter for subsystem value udevadm: monitor - print error if we can not bind to socket update TODO udevadm monitor - add --subsystem-match= libudev: monitor - use simpler hash libudev: monitor - switch to filter_add_match_subsystem_devtype() libudev: monitor - do not filter messages with wrong magic udevadm: monitor - add : support libudev: monitor - add udev_monitor_filter_remove libudev: queue - fix get_seqnum_is_finished() cdrom_id: skip media tests if CDROM_DRIVE_STATUS != CDS_DISC_OK libudev: queue - clarify comments libudev: monitor - export filter_update() update NEWS drop "extern" keyword from non-static function rule_generator: net - fix usb comment generation rules: input - add links for USB/platform non-kbd/mouse devices rules: input - fix comments rules: add rfcomm* to group dialout accept DEVNAME from the kernel as a hint for the node name update TODO build: use AC_MSG_RESULT rules: add "event*" match udevd: revert initial device node creation rules: remove initramfs comment handle devtmpfs nodes oops, removed ppp entry from rules got committed remove all PHYSDEVPATH handling and warning about remove asmlinkage rules: fix ieee1394 rules add "static" back to the inline functions update TODO delete vol_id and require util-linux-ng's blkid delete libvolume_id Lubomir Rintel (1): rule-generator: net - whitelist NICs that violate MAC local scheme Summary of changes from v140 to v141 ============================================ Adam Buchbinder (4): usb_id: add manpage cdrom_id: update manpage create_floppy_devices: expand manpage vol_id: fix language in manpage Alan Jenkins (1): avoid leaking netlink socket fd to external programs Borislav Petkov (1): rules: rename ide-floppy to ide-gd David Brownell (1): rules: exclude mtd* from persistent disk links Kay Sievers (15): rules: fix extra quote in 50-udev-default.rules version bump udevadm: test - handling trailing '/' in devpath udevadm: monitor - clarify printed header rules: remove ram* from persisten disk links blacklist rules: serial - support ttyACM devices rules: replace IDE driver with media match usb_id: add ID_VENDOR_ID, ID_MODEL_ID, ID_USB_INTERFACE_NUM, ID_USB_DRIVER libudev: GPL -> LGPL usb_id: remove unused variable send monitor events back to netlink socket "UDEV_MONITOR_KERNEL/UDEV" -> "kernel/udev" IMPORT: 2048 -> 4096 bytes buffer path_encode: fix max length calculation libudev: monitor - unify socket message handling Michal Soltys (1): rules: md-raid.rules fix Robby Workman (1): udevadm: trigger - add "--action" to --help Scott James Remnant (1): libudev: monitor - ignore messages from unusual sources Summary of changes from v139 to v140 ============================================ Harald Hoyer (1): libvolume_id: bump age Kay Sievers (12): version bump update TODO volume_id: ntfs - fix uuid setting update TODO rules: Fedora update libudev: queue - use lstat() to check existence of symlink udevadm: settle - add --seq-start= --seq-end= udevd: switch watch symlinks to devpath udevadm: add text for new options to command and man page update TODO libudev: ctrl - return error after sending ctrl message udevadm: settle - use timeout signal, instead of loop counter Michael Prokop (1): fix compile error in debug mode Scott James Remnant (1): udevadm: settle - synchronise with the udev daemon Summary of changes from v138 to v139 ============================================ Kay Sievers (11): version bump remove static local variable use the event udev_device to disable the watch on "remove" add "nowatch" to disable a default installed watch with a later rule add m4/ subdir use AC_USE_SYSTEM_EXTENSIONS instead of AC_GNU_SOURCE usb_id: add ID_USB_INTERFACES=:0e0100:0e0200:010100:010200: usb_id: return values if called directly for an usb_device usb_id: fix NULL string usage usb_id: fix comment udevadm: info - export all devices with --export-db Scott James Remnant (10): Don't add inotify watch until RUN rules processed. Clear existing inotify watch before processing. Cleanup a little. Allow watch handle to be stored in the udevdb. Store watch handle in db. Use the udevdb to speed up watch clearing. Put a log message in a more sensible place. Output watch handle in udevadm info. lookup the old watch handle; reload only if has a path Look at more inotify events in the buffer than just the first. Summary of changes from v137 to v138 ============================================ David Zeuthen (1): *_id: add model/vendor enc strings Karel Zak (2): vol_id: fix ddf version string vol_id: add missing id->type to swap0 Kay Sievers (13): man: fix grammar version bump fix NAME="" logic rules: dm - add escape for uuid links with whitespace test: add test for empty and non-existent ATTR rules: fix md "change"/"remove" handling autogen.sh: add more warnings fix NAME= and OPTION+="string_escape=..." logic rules: move OPTIONS to separate rule use global "reload_config" flag rules: add "watch" option to dm and md rules rules: include loop block devices in persistent links release 138 Matthias Schwarzott (1): rules: Gentoo update Miklos Vajna (1): doc: writing udev rules - refer to 'udevadm info' instead of 'udevinfo' Scott James Remnant (2): udevd: optionally watch device nodes with inotify rules: update persistent storage rules to use inotify watches Summary of changes from v136 to v137 ============================================ Alan Jenkins (2): man: typo fixes remove stray initializer Kay Sievers (17): version bump rules: fix typo in ide cd rule libudev: use 4096 bytes buffer for attribute reading rules: add drm devices to group "video" do not complain about a missing /etc/udev/rules.d/ udevadm: test - remove --force option update NEWS remove name from index if the node name has changed cleanup old names before creating the new names open-code pollfd setup increase netif renaming timeout from 30 to 90 seconds Merge commit '5f03ed8a56d308af72db8a48ab66ed68667af2c6' Merge commit '9032f119f07ad3b5116b3d4858816d851d4127de' split up long line udevd: add back SA_RESTART usb_id: handle ATAPI devices like SCSI devices udevadm: settle - fix typo Lennart Poettering (1): fix naming for tape nst devices in /dev/tape/by-path/ Olaf Kirch (2): udevd: use ppoll instead of signal pipes reap children faster Scott James Remnant (2): Allow user and group lookup to be disabled. Expose delayed name resolution Sven Jost (1): volume_id: support via raid version 2 Summary of changes from v135 to v136 ============================================ Adam Buchbinder (1): extras: fix mis-spelling of "environment" Harald Hoyer (1): rule_generator: fix enumeration for write_cd_rules Jeremy Higdon (1): path_id: rework SAS persistent names Karel Zak (1): volume_id: HPFS code clean up Kay Sievers (54): rules: ATA_COMPAT do not try to match on sr*, it will never have vendor ATA scsi_id: do not fail if no serial is found like for optical drives update configure and NEWS rules: fix isdn rules rules: add persistent /dev/serial/{by-id,by-path} rules make: install serial rules file make: do not delete autotools generated file with distclean udevadm: settle - allow --timeout=0 and --quiet rules: move aoe rules to default rules file volume_id: btrfs - update format rules: add "do not edit header" volume_id: support sub-uuid's and plug in btrfs device uuid libudev: include build: add -lsepol build: just use autoreconf -i rules: remove ide-scsi rules: first simple step merging with Ubuntu rules "'/sbin/modprobe abnormal' exit" - also print program options rules: more changes toward Ubuntu rules merge rules: more changes toward Ubuntu rules merge rules: remove /dev/raw/raxctl symlink, it's a devfs leftover rules: rtc - create rtc compat link only for cmos type rtc rules: remove legacy symlinks rules: do not put raw1394 in "video" group rules: second round merging with Ubuntu rules rules: remove /dev/dsp /dev/audio rules: put alsa in group "audio" rules: isdn - remove /dev/isdn/capi20 symlink rules: provide /dev/raw/rawctl if needed, store database entries also for devices which do not have a device node build: use autoreconf --symlink usb_id: add "image" class require non-SYSFS_DEPRECATED 2.6.20+ kernel build: default to --prefix=/usr --exec-prefix="" libudev: enumerate - add lookup by property rules: input - make sure needed variables are set libudev: device - read "uevent" only if info is not already loaded libudev: subsytem -> subsystem libudev: bump revision usb_id: use devtype lookup require 2.6.22+ kernel rules: Ubuntu merge - use group "cdrom" rules: Ubuntu merge - use group "tape" rules: replace DVB shell script rule rules: Ubuntu merge - s/uucp/dialout/ update NEWS update NEWS enable skipping of "naming-only" rules usb_id: s/image/media/ udevadm: s/udevinfo/udevadm info/ rules: reorder block rules rules: zaptel - add "dialout" group libudev: device - add udev_device_get_property_value() libudev: test - add udev_device_get_property_value() Marcel Holtmann (3): libudev: device - add devtype support libudev: device - lookup subsystem and devtype together libudev: device - remove udev_device_get_parent_with_subsystem Michal Soltys (1): man: udev - update NAME assignment Ryan Thomas (1): rules: add rules for AoE devices Summary of changes from v134 to v135 ============================================ Kay Sievers (6): usb_id: add "break" to currently unused case labels rules: fix cciss disk/by-id/ links rules: add infiniband rules rules: infiniband.rules -> 40-infiniband.rules fix network interface name swapping update configure and NEWS Marcel Holtmann (1): usb_id: fix switch statement for video type Piter PUNK (2): rules: /dev/null -> X0R rules: add usb device nodes Summary of changes from v133 to v134 ============================================ Gabor Z. Papp (1): include errno.h in sysdeps.h Harald Hoyer (1): rules: add persistent rules for memory stick block devices Kay Sievers (19): autogen.sh: fix -print-multi-os-directory usage volume_id: update btrfs magic bump version rules: merge group "video" into default rules rules: v4l - add by-id/ links for USB devices libudev: accept NULL whitelist in util_replace_chars() usb_id: replace chars in returned strings ata_id: make sure, we do not have slashes in values scsi_id: make sure, we do not have slashes in values volume_id: remove unused usage types vol_id: if regular files are probed, use stat() for the size value volume_id: update btrfs volume_id: clear probing result before probing and do not probe a second time, if not needed path_id: fix fibre channel handling update NEWS TODO floppy: use ARRAY_SIZE() fix handling of swapping node name with symlink name silence PHYSDEV* warning for WAIT_FOR* rules rules: exclude "btibm" devices from vol_id calls Matthias Schwarzott (1): rules: Gentoo update Peter Breitenlohner (2): man: fix typos floppy: fix array bounds check and minor calculation Summary of changes from v132 to v133 ============================================ Alan Jenkins (2): udevd: de-duplicate strings in rules scsi_id: we don't use DEVPATH env var anymore, update man page Karel Zak (1): volume_id: fat - move check for msdos signature (0x55 0xaa) Kay Sievers (22): silence "comparison between signed and unsigned" string index - split nodes and childs to allow and unlimited number of childs reserve child slot 0 merge trie nodes, childs and root into a single array set errno = ENOSYS in inotify stub udevadm: info - unify -V and --version rules: remove DEVTYPE disk/partition rules: remove pnp shell script, acpi loads these modules properly update NEWS configure: add linux-hotplug mail address remove len == 0 check, the index root is always '\0' volume_id: bump revision volume_id: always check for all filesystem types and skip conflicting results volume_id: fat - accept empty FAT32 fsinfo signature fix spelling in comment volume_id: ntfs - mark as no other fs must match vol_id: clarify error message libudev: device - handle disk "device" link for partitions in deprecated sysfs layout limit $attr() magic to well-known links only udevd: fix cleanup of /dev/.udev/uevent_seqnum fix $links substitution for devices without any link update NEWS Sergey Vlasov (1): udevadm: fix option parsing breakage with klibc Summary of changes from v131 to v132 ============================================ Kay Sievers (2): fix size_t compiler warning on 32 bit platforms convert debug string arrays to functions Summary of changes from v130 to v131 ============================================ Alan Jenkins (17): libudev: fix sysnum logic for digit-only device names udevd: avoid overhead of calling rmdir on non-empty directories use more appropriate alternatives to malloc() libudev: util - optimize path_encode() libudev: allocate udev_device->envp[] dynamically replace strncpy() with strlcpy() use re-entrant variants of getpwnam and getgrnam udevd: fix memory leak udevd: fix WAIT_FOR_SYSFS execution order fix handling of string_escape option udevd: use a tighter loop for compare_devpath() udevd: avoid implicit memset in match_attr() kerneldoc comment fixes udevd: simplify rules execution loop udevd: fix termination of rule execution udevd: be more careful when matching against parents udevd: shrink struct token to 12 bytes Kay Sievers (113): remove outdated docs/README-gcov_for_udev libudev: device - add device lookup by subsystem:sysname libudev: also prefix non-exported functions with udev_* libudev: add udev_monitor_send_device() libudev: list - add flag libudev: device - generate DEVNAME and DEVLINKS properties vol_id: update README libudev: handle ! in sysname, add sysnum, return allocated list_entry on add delete simple-build-check.sh test: move global ENV{ENV_KEY_TEST}="test" to local rule libudev: monitor - fix send_device() property copying libudev: device - add get_envp() to construct envp from property list libudev: do not include ctrl in libudev.so libudev: monitor - do not mangle DEVLINKS property libudev: update DEVLINKS property when properties are read libudev: device - lookup "subsystem" and "driver" only once libudev: device - export properties when values are set libudev: list - handle update of key with NULL value libudev: ctrl - fix typo in set_env() libudev: add global property list libudev: device - copy global properties, unset empty properties volume_id: btrfs - update magic to latest disk format udevd: use libudev move udev_device_db to libudev rename udev source files libudev: always add UDEV_LOG libudev: monitor - export MAJOR/MINOR only if available udev-node: name_list -> udev_list udev-rules-parse: name_list -> udev_list delete name_list, move common file functions fix sorting of rules files run_program: prevent empty last argv entry update IMPORT= file/stdout property parsing update rules file parsing delete udev-util-file.c libudev: list - prepend udev_* to all functions libudev: add sysnum to test program test: fix a few unintentially wrongly written rules which cause parse errors libudev: monitor - add set_receive_buffer_size() libudev: ctrl - change magic to integer libudev: make list_node functions available udevd: use udev_list_node collect: use udev_list delete list.h merge udev-rules.c and udev-rules-parse.c make struct udev_rules opaque move run_program to util udev_event_run() -> udev_event_execute_rules() udev_rules_run() -> udev_event_execute_run(); move udev_rules_apply_format() to udev-event.c udev_list_cleanup() -> udev_list_cleanup_entries() selinux_init(udev) -> udev_selinux_init(udev) prefix udev-util.c functions with util_* pass make distcheck libudev: device - get_attr_value() -> get_sysattr_value() cdrom_id: remove ARRAY_SIZE() declaration replace missing get_attr_value() -> get_sysattr_value() add "root" == 0 shortcuts to lookup_user/group() do not use the new work-in-progress parser rule matcher libudev: device - 128 -> ENVP_SIZE add util_resolve_subsys_kernel() handle numerical owner/group string in lookup_user/group() replace in-memory rules array with match/action token list do not create temporary node ($tempnode) if node already exists shrink struct udev_event shrink struct udev_event rule_generator: fix netif NAME= value extraction regex skip SYMLINK rules for devices without a device node rules: let empty strings added to buffer always return offset 0 fix uninitialized variable warnings cache uid/gid during rule parsing distinguish "match" from "assign" by (op < OP_MATCH_MAX) determine at rule parse time if we need to call fnmatch() special-case "?*" match to skip fnmatch() libudev: monitor - replace far too expensive snprintf() with strlcpy() libudev: monitor - cache result of monitor send buffer fix "unused" warnings remove debug printf match KEY="A|B" without temporary string copy match_attr() - copy attr value only when needed do not init string arrays, just clear first byte fix $attr{[/]} substitution libudev: device - fill envp array while composing monitor buffer test: add RUN+="socket: ..." to a test to run monitor code libudev: device - allocate envp array only once update NEWS udevd: merge exec and run queue to minimize devpath string compares ATTR{}== always fails if the attribute does not exist rules: remove SCSI timeouts rules: remove "add" match from usb device node rule edd_id: add "change" event match fstab_import: add "change" event match write trace log to stderr log rules file and line number when NAME, SYMLINK, OWNER, GROUP, MODE, RUN is applied skip entire rule containing device naming keys, if no device can be named fix udev_node_update_old_links() logic move some info() to dbg() add "devel" and "install" switches to autogen.sh move debugging strings inside #ifdef DEBUG firmware.sh: record missing files in /dev/.udev/firmware-missing/ fix list handling in enumerate and rules file sorting volume_id: btrfs update info() PROGRAM and IMPORT execution fix $links substitution fix cleanup of possible left-over symlinks do not import the "uevent" file when we only read the db to get old symlinks usb_id: MassStorage SubClass 6 is "scsi" not "disk" unify string replacement $links should be relative fix indentation rules: md - add mdadm 3 device naming cleanup /dev/.udev/queue on startup and exit udevadm: settle - exit if udevd exits Matthias Koenig (1): volume_id: swap - larger PAGE_SIZE support Steven Whitehouse (1): volume_id: support for GFS2 UUIDs Summary of changes from v129 to v130 ============================================ Kay Sievers (26): fix compile error with --disable-logging libudev: enumerate - add_device() -> add_syspath() volume_id: hpfs - read label and uuid use no_argument, required_argument, optional_argument in longopts libudev: get rid of selinux libudev: device - add get_parent_with_subsystem() usb_id: use libudev udevadm: info - fix --query=all for devices without a device node vol_id: add size= option move selinux noops to udev.h volume_id: add dbg() as noop to check for compile errors vol_id: fix logging glue vol_id: always use the safe string versions for unencoded label and uuid volume_id: better DDF raid detection volume_id: add btrfs volume_id: use PRIu64i, PRIx64 macros udevd: clarify deprecated sysfs layout warning libudev: fix --enable-debug don not print error if GOTO jumps just to next rule volume_id: add more vfat debugging information libudev: libudev.pc remove selinux store node name and symlinks into db symlink target if they are small enough volume_id: more fat debugging libudev: fix typo in "multiple entries in symlink" handling connect /sys and /dev with /sys/dev/{block,char}/: and /dev/{block,char}/: replace spaces in dm and md name symlinks Summary of changes from v128 to v129 ============================================ Alan Jenkins (7): udev-test.pl: set non-zero exitcode if tests fail scsi_id: compiler warning on 32-bit trivial cleanup in udev_rules_iter avoid repeated scans for goto targets (udev_iter_find_label) replace strerror() usage with threadsafe "%m" format string fix messages (inc. debug compile failure) introduced when optimizing "goto" allow compiler to check dbg() arguments on non-debug builds Kay Sievers (46): libudev: switch to "udev_device_get_parent" libudev: udev_device - add attribute cache libudev: handle "device" link as parent, handle "class" "block" as "subsystem" udevadm: info - fix lookup-by-name libudev: switch API from devpath to syspath libudev: rename ctrl_msg to ctrl_msg_wire vol_id: fix lib logging glue fix broken symlink resolving fix udevadm trigger libudev: pass udev_device in enumerate libudev: fix "subsystem" value always include config.h from Makefile libudev: udev_device_get_devname -> udev_device_get_devnode libudev: add udev_device_new_from_devnum() libudev: also import "uevent" file when reading udev database libudev: add userdata pointer libudev: replace awkward callback list interfaces with list iterators libudev: get devnum from uevent file libudev: enumerate_get_devices_list -> enumerate_get_list libudev: initialize selinux only when needed libudev: device - read database only when needed libudev: rework list handling libudev: more list rework lubudev: accept more sys directories as devices, and parent devices libudev: enumerate - accept list of subsystems to scan, or skip libudev: enumerate "subsystem" libudev: enumerate - scan /sys/block/ if needed libudev: enumerate - split new() and scan() test: replace ancient sysfs tree with recent one test: add missing pci directory because of .gitignore *.7 gitignore: move *.8 to subdirs test: replace last reference of "/class/*" devpath fix dbg() callers libudev: enumerate - scan devices and subsystems, add subsystem and attribute filter udevadm: trigger: use libudev fix segfault caused by wrong pointer used in dbg() libudev: device_init() -> device_new() udevadm: trigger fix long option --type= libudev: add queue interface udevadm: settle - use libudev queue libudev: device - handle /sys/block// libudev: enumerate - ignore regular files while scanning udevadm: trigger --type=failed - use libudev queue rules: ieee1394 - create both, by-id/scsi-* and by-id/ieee-* links build: include Makefile.am.inc in all Makefile.am udevd: print warning if CONFIG_SYSFS_DEPRECATED is used Summary of changes from v127 to v128 ============================================ Alan Jenkins (8): fix uninitialized name_list error::ignore_error do not needlessly declare some local variables in udev_rules_parse.c as static remove deprecated envp[] in main() fix name compare bug name_list_key_add() remove redundant string copy in udev_rules_apply_format() remove redundant "remove trailing newlines" in udevadm info threadsafe rules iteration fix off-by-one in pass_env_to_socket() Kay Sievers (53): libudev: add monitor documentation libudev: fix --disable-log autogen.sh: add --with-selinux volume_id: hfs - calculate proper uuid fix dangling pointer returned by attr_get_by_subsys_id() udev-test.pl: add --valgrind option libudev: libudev.pc add Libs.private volume_id: fail on undefined __BYTE_ORDER remove FAQ libudev: fix monitor documentation libudev: add udev_device_get_syspath() udev_device_init() remove statically allocated device support udevadm: info - fix broken --device-id-of-file= udevadm: control - use getopt_long() udevadm: print warning to stderr if udevadm is called by symlink udev-test.pl: remove left-over comment from --valgrind option udevadm: rename source files udevadm: rename internal functions to udevadm_* udevadm: split out control functions udevadm: move init from commands to udevadm autogen.sh: add debug use libudev code, unify logging, pass udev context around everywhere volume_id: linux_raid - fix logic for volumes with size == 0 vol_id: add --debug option udevadm: add --version --help options to man page, hide them as commands move udev_ctrl to libudev-private udev-test.pl: set udev_log="err" test-udev: cleanup libudev context and overridden rules file string test-udev: remove unused var add a bunch of private device properties to udev_device udevadm: monitor - use libudev for udev monitor libudev: monitor - add event properties to udev_device udevadm: log message if udevadm link is used udevd: remove max_childs_running logic libudev: monitor- add netlink uevent support udevadm: monitor - use libudev code to retrieve device data libudev: udev_device - read "driver" value libudev: rename enumerate function libudev: add selinux libudev: initialize selinux after logging volume_id: merge util.h in libvolume_id-private.h update file headers libudev: udev_device - add more properties libudev: do not use udev_db.c libudev: get rid of udev_sysfs.c libudev: get rid of udev_utils.c libudev: rename libudev-utils.c libudev-util.c libudev: do not use any udev source file extras: use libudev code convert to libudev and delete udev_utils_string.c get rid of udev_sysdeps.c use size definitions from libudev udevadm: info - use "udev_device" Summary of changes from v126 to v127 ============================================ Karel Zak (2): build-sys: don't duplicate file names build-sys: remove non-POSIX variable names Kay Sievers (26): add inotify dummy definitions if inotify is not available build: remove autopoint check udevadm: trigger - add missing attr filter to synthesized "subsystem" register events ignore duplicated rules file names fix .gitignore rules: delete all distro rules which do not use default rules rules: add nvram rules: add isdn rules rules: Gentoo update add missing includes add some warnings update .gitignore add missing 'v' for "make changelog" build: fix "make dist" vol_id: make the --offset= argument optional rules: optical drives - probe at last session offset, do not probe for raid libudev: add library to access udev information libudev: split source files update INSTALL libudev: add udev event monitor API volume_id: remove deprecated functions and bump major version volume_id: remove left-over fd close() split udev_device.c to leave out rules handling from libudev libudev: link against selinux if needed firmware.sh: lookup lookup kernel provided firmware directory libudev: require LIBUDEV_I_KNOW_THE_API_IS_SUBJECT_TO_CHANGE Michal Soltys (1): rules: fix md rules for partitioned devices Summary of changes from v125 to v126 ============================================ Kay Sievers (9): delete all Makefiles and move udev source to udev/ use autotools rules: mode 0660 for group "disk" rules: update Fedora rules update ChangeLog INSTALL: --enable-selinux not --with-selinux volume_id: move static lib to $prefix volume_id: create relative links rules: run vol_id on opticals only if media is found Marco d'Itri (1): rules: Debian update Thomas Koeller (1): use proper directory lib/lib64 for libvolume_id Summary of changes from v124 to v125 ============================================ John Huttley (1): rules: tape rules - add nst to usb and 1394 links Karl O. Pinc (1): man: clarify $attr{} parent searching Kay Sievers (14): collect: fix size_t printf path_id: suppress trailing '-' like 'ID_PATH=pci-0000:05:01.0-' rules: add v4l persistent links docs: update some docs and delete outdated stuff scsi_id: fix fallback to sg v3 for sg nodes rules: fix cciss rules for partition numbers > 9 udev.conf: udevcontrol -> udevadm control rules: use consistently OPTIONS+= scsi_id: the fallback fix broke error handling man: rebuild from xml do not touch node ownership and permissions, if already correct rules: tape rules - add nst to by-path/ links udevadm: info - add --export format to --device-id-of-file= move default rules from /etc/udev/rules.d/ to /lib/udev/rules.d/ Marco d'Itri (7): rules_generator: net rules - do not print error if file is missing and ignore commented rules man: add link_priority default value scsi_id: man page fix udevadm: settle - add verbose output when running into timeout rules: Debian update rules: Debian update ignore rule with GOTO to a non-existent label Thomas Koeller (1): scsi_id: include sys/stat.h Tobias Klauser (1): collect: check realloc return value Summary of changes from v123 to v124 ============================================ Kay Sievers (1): cdrom_id: fix recognition of blank media Summary of changes from v122 to v123 ============================================ Erik van Konijnenburg (3): add substitution in MODE= field Makefile: use udevdir in "make install" volume_id: support for oracleasm Harald Hoyer (1): scsi_id: retry open() on -EBUSY Karel Zak (2): volume_id: remove unnecessary global variable volume_id: enable GFS probing code, add LABEL support Kay Sievers (5): edd_id: call it only for sd* and hd* rename WAIT_FOR_SYSFS to WAIT_FOR and accept an absolute path rules: tape rules - use bsg device nodes for SG_IO rules: persistent net - handle "locally administered" ibmveth MAC addresses cdrom_id: export ID_CDROM_MEDIA_TRACK_COUNT_AUDIO=, ID_CDROM_MEDIA_TRACK_COUNT_DATA= Michal Soltys (1): man: add NAME== match entry Xinwei Hu (2): collect: realloc buffer, if needed udevd: export .udev/queue/$seqnum before .udev/uevent_seqnum Summary of changes from v121 to v122 ============================================ Hannes Reinecke (2): scsi_id: remove all sysfs dependencies scsi_id: add SGv4 support Karel Zak (1): volume_id: clean up linux_raid code Kay Sievers (8): scsi_id: update man page scsi_id: remove bus_id option scsi_id: add --sg-version= option rules: adapt to new scsi_id rules: adapt tape rules to new scsi_id scsi_id: add bsg.h volume_id: bump version Makefile: do not create udevcontrol, udevtrigger symlinks MUNEDA Takahiro (2): man: udevd- fix udev(8) reference man: scsi_id Matthias Schwarzott (1): cdrom_id: fix segfault Summary of changes from v120 to v121 ============================================ Damjan Georgievski (1): libvolume_id: recognize swap partitions with a tuxonice hibernate image Daniel Drake (1): writing udev rules: fix rule typos David Woodhouse (1): rules_generator: net rules - add "dev_id" value to generated rules Harald Hoyer (1): selinux: more context settings Kay Sievers (21): udevinfo: do not replace chars when printing ATTR== matches vol_id: add --offset option cdrom_id: replace with version which also exports media properties udevd: at startup write message including version number to kernel log rules_generator: net rules - always add KERNEL== match to generated rules selinux: fix missing includes allow setting of MODE="0000" path_id: remove subsystem whitelist logging: add trailing newline to all strings scsi_id: initialize serial strings persistent device naming: also read unpartitioned media cdrom_id: add more help text add $links substitution fstab_import: add program to IMPORT matching fstab entry add OPTIONS+="event_timeout=" write "event_timeout" to db udevadm: trigger - add --env= option udevadm: control - fix --env key to accept --env== udevadm: info - do not print ATTR{dev}== persistent device naming: update tape rules rules: update md rules Summary of changes from v119 to v120 ============================================ Kay Sievers (9): test: remove duplicated EXTRA entry rules: remove last WAIT_FOR_SYSFS, load ppdev, switch scsi_device udevadm: trigger - option to synthesize events and pass them to a socket udevadm: info - resolve devpath if symlink is given udevadm: remove old man page links and compat links for debugging tools udevadm: trigger - fix broken socket option check udevadm: trigger - fix --socket== + --verbose also accept real socket files for RUN+="socket:" persistent device naming: cleanup storage rules Michael Kralka (1): udevd: serialize events if they refer to the same major:minor number Summary of changes from v118 to v119 ============================================ Anthony L. Awtrey (1): do not skip RUN execution if device node removal fails Harald Hoyer (2): rules: Fedora update rules: do not set GROUP="disk" for scanners Jiri Slaby (1): rules_generator: add missing write_net_rules unlock Karel Zak (2): volume_id: fix UUID raw buffer usage volume_id: fix typo in function documentation Kay Sievers (10): switch mailing lists to linux-hotplug@vger.kernel.org rules: remove tty rule which can never run because of an earlier "last_rule" volume_id: update ext detection selinux: set context for real file name not the temp name hack to allow ATTR{block/*/uevent}="change" rules_generator: add KERNEL=="*" to generated rules persistent device naming: also run on "change" event test: add "subsystem" links to all devices sysfs: depend on "subsystem" link extend hack to allow TEST=="*/start" Matthias Schwarzott (1): volume_id: respect LDFLAGS Neil Williams (1): volume_id: add prefix=, exec_prefix= Roy Marples (1): Makefile: do not require GNU install Summary of changes from v117 to v118 ============================================ Daniel Drake (1): doc: update "writing udev rules" Hannes Reinecke (1): volume_id: LVM - add uuid Kay Sievers (9): remove udevstart rules_generator: do not create rules with insufficient matches man: udevadm settle - mention 180 seconds default timeout libvolume_id: squashfs - add endianess support for LZMA compression rules: add AOE rule volume_id: md - add metadata minor version volume_id: run only once into a timeout for unreadable devices create_floppy_devices: fix logic for more than one floppy device volume_id: also add readable check to probe_all() Matthias Schwarzott (1): rules: Gentoo update Michael Prokop (1): libvolume_id: squashfs+LZMA compression detection Summary of changes from v116 to v117 ============================================ Dan Nicholson (2): extras: ignore built and generated files volume_id: create relative symlink when $(libdir) = $(usrlibdir) Kay Sievers (15): usb_id: fail if vendor/product can not be retrieved rules: SUSE update firmware: do not print error if logger is missing volume_id: vfat - allow all possible sector sizes volume_id: LUKS - export version volume_id: ntfs - rely on valid master file table volume_id: bump version udevinfo: exclude "uevent" file from --attribute-walk udevadm: merge all udev tools into a single binary udevadm: accept command as option, like --help, --version udevadm: add info option --device-id-of-file= Makefile: fix bogus version number than got committed udevadm: also return major==0 results for --device-id-of-file man: udevd.8 - remove udevcontrol section udevadm: control - allow command to be passed as option MUNEDA Takahiro (1): man: fix udevadm.8 typo Matthias Schwarzott (2): firmware: remove hardcoded path to logger rules: Gentoo update VMiklos (1): rules: Frugalware update Summary of changes from v115 to v116 ============================================ Bryan Kadzban (1): rules: fix typos Harald Hoyer (3): check line length after comment check and whitespace strip only install *.rules remove extra space from udevinfo symlink output Kay Sievers (29): rules: fix two trivial typos rules: random and urandom are 0666 rules: add REMOVE_CMD rule track "move" events to rename database and failed files rules: Gentoo update rules: add i2o driver rule man: recreate man pages volume_id: fix linux_raid metadata version 1.0 detection add $name substitution do not delete the device node with ignore_remove, but handle the event print warning for invalid TEST operations rules: do not delete /lib/udev/devices/ nodes on "remove" rules: remove broken nvram group assignment without any permission add /dev/rtc symlink if new rtc drivers are used increase WAIT_FOR_SYSFS timeout to 10 seconds rules: put bsd nodes in /dev/bsd/ directory path_id: fix for stacked class devices ignore device node names while restoring symlinks from the stack use SEQNUM in /dev/.udev/queue/ instead of devpath rules: add memstick module loading udevinfo: simplify symlink printing logic prevent wrong symlink creation if database disagress with current rules fix wrong variable used in logged string update README rule_generator: move all policy from write_net_rules to the rules file rules: call usb_id only for SUBSYSTEMS=="usb" rules: split out and fix persistent tape rules fix debug output string rule_generator: always match netif type in generated rule Matthias Schwarzott (3): rules: Gentoo update rules: Gentoo update rules: Gentoo update Michael Morony (1): set buffer size if strlcpy/strlcat indicate truncation maximilian attems (1): correct includes in udev_selinux.c Summary of changes from v114 to v115 ============================================ Harald Hoyer (1): rules: fix typo in 80-drivers.rules Kay Sievers (15): rules: add default rules rules: update SUSE rules rules: add packages rules rules: add ia64 rules rules: move md-raid rules to packages dir rules: run vol_id only for partitions rules: update Fedora rules edd_id: move persistent rules to its own file accept relative path for TEST rules: add iowarrior rule volume_id: fix sqashfs detection do not ignore dynamic rule if it is the last one in the list rule_generator: fix wrong DRIVERS!= logic rules: update Fedora Makefile: install default rules Marco d'Itri (3): rules_generator: remove policy from write_cd_rules rules_generator: fix write_cd_rules when similar names exist in the root directory rules: Debian update Summary of changes from v113 to v114 ============================================ Hannes Reinecke (3): collect: extra to synchronize actions across events add $driver subtitution rules_generator: add S/390 persistent network support Kay Sievers (24): rules_generator: remove executable flag from include file always unlink temporary file before creating new one rules: SUSE update volume_id: ext4 detection udevtrigger: allow to specify action string add option to RUN key to ignore the return value of the program use global udev_log variable instead of parameter in run_program add udev_rules_run() to handle RUN list move udev_utils_run.c into udev_rules.c rules: SUSE update name_list: rename loop_name -> name_loop handle dynamic rules created in /dev/.udev/rules.d/ allow SYMLINK== match libvolume_id: use /usr/$libdir in pc file Makefile: add --as-needed flag to ld restore behavior of NAME== rules_generator: remove "installation" function udevtrigger: trigger "driver" events rules: update SUSE rules: Fedora update rules: add "do not edit" comment rules: Fedora update rules_generator: skip random MAC addresses write changed network interface names to the kernel log Matthias Schwarzott (3): rules: Gentoo update fix inotify to work not only once rules: Gentoo update Richard Hughes (1): Makefile: add "make dist" for nightly snapshots Summary of changes from v112 to v113 ============================================ David Zeuthen (1): vol_id: do not fail if unable to drop privileges Kay Sievers (12): add missing ChangeLog make ATTR{[$SUBSYSTEM/$KERNEL]}="" working rules: recognize partitions and disk devices properly rules: SUSE update atomically replace existing nodes and symlinks do not try to create existing file info() for ignore_remove rules: SUSE update Makefile: check for missing ChangeLog or RELEASE-NOTES at release allow to disable the replacement of unusual characters no newline in log messages udevd: do not use syslog if --verbose (debugging) is used Tobias Klauser (1): fix typo in udev_utils_run.c Summary of changes from v111 to v112 ============================================ Fabio Massimo Di Nitto (1): rules: ignore partitons that span the entire disk Hannes Reinecke (1): cciss device support Kay Sievers (34): udevd: close /proc/meminfo after reading create_floppy_devices: remove dead "unlink" code volume_id: add function documentation udev_db: escape path names with \x00 instead of %00 udevsettle: use long options replace_chars: replace spaces in node name volume_id: add and export string encoding function vol_id: export encoded strings rules: use encoded strings instead of skipping characters udevtest: print message before log output volume_id: escape % character replace_chars: replace % character IMPORT: do not mangle whitespace scsi_id: do not install symlink in /sbin rules: SUSE update volume_id: terminate overlong label strings scsi_id: add long options rules: use long options for scsi_id path_id: skip subsystem directory rules: fix cciss rule rules: SUSE update scsi_id: fix typo in help text fix "do not access parent" warning for ATTR{} sysfs: add device lookup by $SUBSYSYTEM:$KERNEL events for "bus" and "class" registration must be matched as "subsystem" udevtest: add --subsystem option sysfs: change order of subsystem lookup add $sys substitution add TEST=="" key add "[$SUBSYSTEM/$KERNEL]" lookup sysfs: handle bus/class top-level directories sysfs: skip unknown sysfs directories rules: SUSE update release 112 Miklos Vajna (2): create_floppy_devices: add man page path_id: remove on make uninstall Ryan Lortie (1): volume_id: support for long-filename based labels Scott James Remnant (2): replace_untrusted_chars: replace all whitespace with space run_program: log "info" not "error" if program is missing Summary of changes from v110 to v111 ============================================ Kay Sievers (19): rules: SUSE update rules: Fedora update volume_id: use md native uuid format vol_id: use long options volume_id: add volume_id_get_* functions vol_id: use volume_id_get_* udevd: use fgets() to read /proc files volume_id: add internal UUID_STRING volume_id: add DDF support vol_id: README update volume_id: rename UUID_64BIT_LE/BE vol_id: add ID_FS_UUID_SAFE rules: use ID_FS_UUID_SAFE rules: SUSE update volume_id: give access to list of all available probers vol_id: use libvolume_id prober list for --probe-all volume_id: add remaining names for prober lookup by type rules: SUSE update volume_id: vol_id depends on libvolume_id Matthias Schwarzott (2): volume_id: fix Makefile for parallel make rules: Gentoo update Summary of changes from v109 to v110 ============================================ Harald Hoyer (1): udevcontrol: allow to set global variables in udevd Kay Sievers (13): remove eventrecorder.sh update SUSE rules volume_id: add md metadata 1.0, 1.1, 1.2 support unset variable with ENV{VAR}="" delete copies of default rules in SUSE rules volume_id: ext - fix endianess in version number rules: Fedora update volume_id: old md metadata has only 32 bit for the uuid volume_id: minix version 3 support don't create $tempnode for devices without major usb_id: add to help text ata_id: use getopt_long() rules: SUSE update Matthias Schwarzott (3): Makefile: respect CFLAGS/LDFLAGS rules: Gentoo update ata_id: don't log error for libata devices on older kernels Summary of changes from v108 to v109 ============================================ Harald Hoyer (1): create_floppy_devices: create nodes with correct selinux context Kay Sievers (11): udevtest: export ACTION string if given as option update SUSE rules make ACTION!="add|change" working udevtest: import uevent variables if possible udevinfo: export all information stored in database default rules: add libata compat links create_path: don't fail if something else created the directory udevd: fix serialization of events path_id: remove broken example libvolume_id: do not install static library update SUSE rules Matthias Schwarzott (2): update Gentoo rules persistent device naming: add joystick links VMiklos (1): path_id: add man page Summary of changes from v107 to v108 ============================================ Kay Sievers (3): udevinfo: relax check for the correct device if looked up by name don't write to sysfs files during test run finally remove the directory event-multiplexer crap Matthias Schwarzott (2): write_cd_rules: set default link type to "by-id" for usb and ieee1394 devices update Gentoo rules Pozsar Balazs (1): udevsettle: read udev not kernel seqnum first Summary of changes from v106 to v107 ============================================ Jean Tourrilhes (1): udevtest: export UDEV_LOG if we changed it Kay Sievers (33): man: add missing options to various man pages man: fix typo create_floppy_devices: apply specified mode without umask man: spelling fixes udevmonitor: add switch for kernel and udev events default rules: wait for 0:0:0:0 scsi devices only update Fedora rules delete dasd_id, it moved to s390-tools update Gentoo rules encode db-file names, instead of just replacing '/' update internal variables if we see $DEVPATH during IMPORT increase /proc/stat buffer maintain index over device-names to devpath relation restore overwritten symlinks when the device goes away store devpath with the usual leading slash add link_priority to rule options, and store it in database pick actual valid device in udev_db_lookup_name cleanup already existing db-entries and db-index on device update selinux: move selinux_exit() to the main programs remove old error message read list of devices from index, make index private to database priority based symlink handling volume_id: get rid of compiler warning udevinfo: remove -d option update %n on netif name change if a node goes away, possibly restore a waiting symlink update TODO man: add "link_priority" option update SUSE rules udevtest: add --force mode udevinfo: print link priority usb_id: append target:lun to storage device serial run_directory: add final warning before removal Marco d'Itri (1): update Debian rules Matthias Schwarzott (2): udevd: cleanup std{in,our,err} on startup udevmonitor: fix swapped event switch descriptions Summary of changes from v105 to v106 ============================================ A. Costa (1): man: fix typos in scsi_id and udevd Andrey Borzenkov (2): vol_id: add -L to print raw partition label vol_id: document -L Jamie Wellnitz (1): persistent device naming: tape devices and medium changers Kay Sievers (15): exclude parent devices from DRIVER== match volume_id: really fix endianess bug in linux_raid detection release 105 man: correct udevinfo --export-db path_id: append LUN to iSCSI path create_floppy_devices: add option for owner/group update example rules apply format chars to ATTR before writing to sysfs add (subsystem) to udevmonitor output update DRIVER== changes remove --version from the udevinfo man page add test for an attribute which contains an operator char man: add note about parent matching behavior scsi_id: accept tabs in /etc/scsi_id.conf remove dead rule in persistent tape rules Matthias Schwarzott (4): correct typo in extras/scsi_id/scsi_id.conf fix retry-loop in netif-rename code add option --version to udevd rule_generator: fix for creating rules on read-only filesystem Peter Breitenlohner (1): fix INSTALL_PROGRAM vs. INSTALL_SCRIPT Sergey Vlasov (3): udevd: init signal pipe before daemonizing unlink old database file before creating a new one fix %c $string substitution Theodoros V. Kalamatianos (1): fix udev attribute names with a colon Summary of changes from v104 to v105 ============================================ A. Costa (1): man: fix typos in scsi_id and udevd Andrey Borzenkov (2): vol_id: add -L to print raw partition label vol_id: document -L Kay Sievers (2): exclude parent devices from DRIVER== match volume_id: really fix endianess bug in linux_raid detection Matthias Schwarzott (2): correct typo in extras/scsi_id/scsi_id.conf fix retry-loop in netif-rename code Peter Breitenlohner (1): fix INSTALL_PROGRAM vs. INSTALL_SCRIPT Sergey Vlasov (3): udevd: init signal pipe before daemonizing unlink old database file before creating a new one fix %c $string substitution Summary of changes from v103 to v104 ============================================ Kay Sievers (12): update Fedora rules update example rules update SUSE rules update SUSE rules volume_id: fix endianess bug in linux_raid detection man: fix udevmonitor text man: recreate from xml rename config "filename" to "dir" remove outdated documentation rename "udev.c" to "test-udev.c" - it is only for testing update Fedora rules use git-archive instead of git-tar-tree Kazuhiro Inaoka (1): inotify syscall definitions for M32R Marco d'Itri (2): write_cd_rules: identity-based persistence scsi_id: remove trailing garbage from ID_SERIAL_SHORT Russell Coker (1): SELinux: label created symlink instead of node Summary of changes from v102 to v103 ============================================ Kay Sievers: persistent storage rules: skip gnbd devices volume_id: add checksum check to via_raid volume_id: add comment about hfs uuid conversion update SUSE rules update Fedora rules Summary of changes from v101 to v102 ============================================ Daniel Drake: writing_udev_rules: fix typo in example rule Kay Sievers: create missing ChangeLog for version 101 update SUSE rules update default rules first try "subsystem" link at a parent device, before guessing if /sys/subsystem exists, skip class, bus, block scanning scsi_id: export ID_SERIAL_SHORT without vendor/product update SUSE rules MUNEDA Takahiro: path_id: fix SAS disk handling Summary of changes from v100 to v101 ============================================ Arjan Opmeer: fix udevinfo help text typo Bryan Kadzban: cleanup default rules add IMPORT operations to the udev man page Kay Sievers: remove Makefile magic for leading '0' in version udevd: use getopt_long() udevd: add --verbose option to log also to stdout udevd: add --debug-trace option rule_generator: improve net rule comment generation volume_id: correct iso9660 high sierra header warn if a PHYSEDV* key, the "device" link, or a parent attribute is used don't print PHYSDEV* warnings for old WAIT_FOR_SYSFS rules udevinfo: print error in --attribute-walk udev_sysfs: unify symlink resolving udevtrigger: trigger devices sorted by their dependency fix spelling in deprecation warning release 101 Michał Bartoszkiewicz: udevtrigger: fix typo that prevents partition events Miles Lane: clarify "specified user/group unknown" error Piter PUNK: update slackware rules VMiklos: update Frugalware rules Summary of changes from v099 to v100 ============================================ Kay Sievers: update SUSE rules fix messed up ChangeLog from release 099 man: add $attr{} section about symlinks revert persistent-storage ata-serial '_' '-' replacement Summary of changes from v098 to v099 ============================================ Greg KH: update Gentoo rules Kay Sievers: udev_db.c: include use fnmatch() instead of our own pattern match code rename major/minor variable to maj/min to avoid warning update source file headers udevtest: print header that ENV{} can't work update TODO udevtrigger: options to filter by subsystem and sysfs attribute udevtrigger: remove unused longindex udevinfo: use long options udevd: use files instead of symlinks for /dev/.udev/queue,failed udevtrigger: fix pattern match reorder options in udevinfo man page udevinfo: fix SUBSYTEMS spelling error fix ENV{TEST}="Test: $env{TEST}" let $attr{symlink} return the last element of the path cdrom_id: add rules file to call cdrom_id udevinfo: do not show symlinks as attributes in --attribute-walk remove broken name_cdrom.pl Marco d'Itri: update Debian rules run_program: close pipe fd's which are connected to child process add persistent rules generator for net devices and optical drives MUNEDA Takahiro: changes rules for ata disk from '_' to '-' Sergey Vlasov: make struct option arrays static const fix "subsytem" typo Summary of changes from v097 to v098 ============================================ Alex Merry: udevtest: allow /sys in the devpath paramter Harald Hoyer: selinux: init once in the daemon, not in every event process Kay Sievers: udevd: remove huge socket buffer on the control socket man page: fix typo rename udev_libc_wrapper -> udev_sysdeps db: store devpath - node relationship for all devices udevinfo: allow -a -n udevinfo, udevtest: simplify '/sys' stripping from devpath argument lookup_user, lookup_group: report "unknown user" and "lookup failed" consistent key naming to match only the event device or include all parent devices skip rule, if too may keys of the same type are used introduce ATTR{file}="value" to set sysfs attributes update SUSE rules update default rules export DRIVER for older kernels as a replacement for PHYSDEVDRIVER fix typo in SUBSYSTEMS key parsing udevtrigger: add --retry-failed volume_id: add suspend partition detection vol_id: use primary group of 'nobody' instead of 'nogroup' remove built-in /etc/passwd /etc/group parser always expect KEY{value} on ATTR, ATTRS, ENV keys use new key names in test programs cleanup commandline argument handling db: don't create a db file for only a node name to store man: add ATTR{file}="value" assignment Lennart Poettering: volume_id: fix fat32 cluster chain traversal Marco d'Itri: fix 'unknow user' error from getpwnam/getgrnam fix rc when using udev --daemon update Debian rules Michał Bartoszkiewicz: man pages: fix typos Summary of changes from v096 to v097 ============================================ Anssi Hannula: add joystick support to persistent input rules Kay Sievers: firmware.sh: remove needless '/' vol_id: add --skip-raid and --probe-all option switch uevent netlink socket to group 1 only increase /proc/stat read buffer use "change" instead of "online" events remove 'static' from local variable libvolume_id: add parameter 'size' to all probe functions man pages: replace 'device-path' by 'devpath' man pages: work around xmlto which tries to be smart refresh vol_id man page udevinfo: add DRIVER== Makefile: fix dependency libvolume_id: read ufs2 label switch ifdef __KLIBC__ to ifndef __GLIBC__ report failing getpwnam/getgrnam as error rename udevcontrol message types and variables initialize unused sockets to -1 udevd: remove useless udevinitsend parameter update README udevd: autotune max_childs/max_childs_running update frugalware rules update SUSE rules move default rules to etc/udev/rules.d/ add 'crypto' devices to persistent storage rules add late.rules to default rules update Fedora rules don't report an error on overlong comment lines update SUSE rules udevd: read DRIVER from the environment Marco d'Itri: make rename_netif() error messages useful path_id: fix an harmless syntax error Piter PUNK: update slackware rules Richard Purdie: Fix inotify syscalls on ARM Summary of changes from v095 to v096 ============================================ Kay Sievers: Makefiles: fix .PHONY for man page target allow longer devpath values path_id: prepare for new sysfs layout Summary of changes from v094 to v095 ============================================ Kay Sievers: update SUSE rules don't remove symlinks if they are already there allow "online" events to create/update symlinks udevinfo: clarify parent device attribute use update SUSE rules netif rename: optimistic loop for the name to become free remove broken %e enumeration Tobias Klauser: print usage of udevcontrol when no or invalid command is given Summary of changes from v093 to v094 ============================================ Daniel Drake: update "writing udev rules" Kay Sievers: libvolume_id: gfs + gfs2 support remove MODALIAS key and substitution add persistent-input.rules Marco d'Itri: update Debian rules Summary of changes from v092 to v093 ============================================ Hannes Reinecke: path_id: add support for iSCSI devices Kay Sievers: libvolume_id: fat - check for signature at end of sector libvolume_id: add more software raid signatures update Fedora rules path_id: prevent endless loop for SAS devices on older kernels remove udevsend replace binary firmware helper with shell script skip device mapper devices for persistent links Summary of changes from v091 to v092 ============================================ Kay Sievers: don't include stropts.h, some libc's don't like it udevd: create leading directories for /dev/.udev/uevent_seqnum vol_id: fix logging from libvolume_id's log function update SUSE rules update SUSE rules add more warnings for invalid key operations fix offsetof() build issue with recent glibc selinux: fix typo in block device node selection vol_id: add NetWare volume detection edd_id: fix "(null)" output if "mbr_signature" does not exist update Fedora rules libvolume_id: nss - use different uuid Libor Klepac: path_id: add platform and serio support Marco d'Itri: update Debian rules path_id: fix bashism Summary of changes from v090 to v091 ============================================ Hannes Reinecke: path_id: fix SAS device path generation Kay Sievers: udevtest: don't try to delete symlinks persistent rules: fix typo in dm rule allow NAME=="value" to check for already assigned value udevd: export initial sequence number on startup Summary of changes from v089 to v090 ============================================ Kay Sievers: udevd: export current seqnum and add udevsettle volume_id: fix endianess conversion typo for FAT32 merge device event handling and make database content available on "remove" set default udevsettle timeout to 3 minutes export INTERFACE_OLD if we renamed a netif let udevmonitor show the possibly renamed devpath volume_id: move some debug to info level udevtrigger: fix event order usb_id: remove uneeded code remove old symlinks before creating current ones path_id: fix loop for SAS devices apply format char to variables exported by ENV Marco d'Itri: add inotify support for hppa and MIPS and log if inotify is not available Matt Kraai: fix typo in error message Summary of changes from v088 to v089 ============================================ Hannes Reinecke: path_id: add bus to USB path Kay Sievers: change rule to skip removable IDE devices don't create uuid/label links for raid members volume_id: provide library fix rule order for persistent tape links update man page volume_id: provide a custom debug function volume_id: rename subdirectory volume_id: use shared library by default because is better than cause volume_id: remove some global symbols volume_id: define exported symbols remove all stripping code man pages: mention udev(7) not udev(8) update Debian rules move all *_id programs to /lib/udev/ update Red Hat rules update SUSE rules pass CROSS_COMPILE to AR and RANLIB down to extras/ volume_id: update README volume_id: generate man page from xml source update README fix symlink targets in Makefiles Summary of changes from v087 to v088 ============================================ Hannes Reinecke: persistent links: add scsi tape links and usb path support Kay Sievers: volume_id: add squashfs detection reset signal handler in event process correct use of fcntl() add udevtrigger to request events for coldplug add ',' to trusted chars volume_id: remove partition table parsing code volume_id: remove all partition table support fix spelling error in debug string rename "persistent disk" to "persistent storage" fix output for USB path Summary of changes from v086 to v087 ============================================ Hannes Reinecke: path_id: support SAS devices Kay Sievers: fix persistent disk rules to exclude removable IDE drives warn about %e, MODALIAS, $modalias remove devfs rules and scripts Masatake YAMATO: typo in debug text in udev_run_hotplugd.c Summary of changes from v085 to v086 ============================================ Kay Sievers: volume_id: replace __packed__ by PACKED macro volume_id: split raid and filesystem detection volume_id: add missing return udevd: fix queue export for multiple events for the same device Kyle McMartin: workaround missing kernel headers for some architectures Nix: update to udev-084/doc/writing_udev_rules Summary of changes from v084 to v085 ============================================ Andrey Borzenkov: Fix trivial spelling errors in RELEASE-NOTES Jeroen Roovers: fix typo in parisc support to path_id Kay Sievers: make WAIT_FOR_SYSFS usable in non "wait-only" rules fix typo in man page include sys/socket.h for klibc build cramfs detection for bigendian exit WAIT_FOR_SYSFS if the whole device goes away update SUSE rules update Red Hat rules update Gentoo rules include errno.h in udev_libc_wrapper.c Summary of changes from v083 to v084 ============================================ Kay Sievers: update SUSE rules switch CROSS to CROSS_COMPILE replace fancy silent build program by simple kernel build like logic move manpages to top level remove UDEVD_UEVENT_INITSEND whitespace fixes scsi_id: remove dead files optimize sysfs device and attribute cache let SYSFS{} look at the device, not only the parent device add debug output to sysfs operations Summary of changes from v082 to v083 ============================================ Andrey Borzenkov: man page: document when substitutions are applied for RUN and other keys check for ignore_device in loop looks redundant Kay Sievers: udevstart: fix NAME="" which prevents RUN from being executed find programs in /lib/udev for IMPORT if {program} is not given don't add $SUBSYSTEM automatically as $1 to programs remove redundant substitution of RUN key Summary of changes from v081 to v082 ============================================ Andrey Borzenkov: substitute format chars in RUN after rule matching Kay Sievers: scsi_id, usb_id: request device parent by subsystem path_id: work with "all devices in /sys/devices" ignore all messages with missing devpath or action Makefile: remove dynamic config file generation path_id: handle fiber channel (Hannes Reinecke ) usb_id: don't fail on other subsytems than "scsi" don't do RUN if "ignore_device" is given increase kernel uevent buffer size move udev(8) manpage to udev(7) recreate man pages from xml source remove udev, udevstart, udevsend from the default installation update SUSE rules rename apply_format() cause it is public now udevtest: add udev_rules_apply_format() to RUN keys let "ignore_device" always return the event successfully Olivier Blin: fixes udev build with -fpie Summary of changes from v080 to v081 ============================================ Kay Sievers: add DEVLINKS to "remove" event better log text and comments vol_id: probe volume as user nobody fix BUS, ID, $id usage prepare moving of /sys/class devices to /sys/devices Summary of changes from v079 to v080 ============================================ Brent Cook: fix dependency for make -j2 coly: fix man page typos Kay Sievers: update RELEASE-NOTES + TODO fix typo in man page update TODO update SUSE rules path_id: fix invalid character class replace libsysfs Marco d'Itri: udev_selinux.c: include udev.h Summary of changes from v078 to v079 ============================================ Kay Sievers: don't log error if database does not exist use udev_root instead of "/dev"in selinux matchpathcon_init_prefix() scsi_id: read page 0x80 with libata drives update SUSE rules remove %e from man page Summary of changes from v077 to v078 ============================================ Greg Kroah-Hartman: Update Gentoo udev main rule file. add parisc support to path_id Hannes Reinecke: scsi_id: -u fold multiple consecutive whitespace chars into single '_' Harald Hoyer: optimize SELinux path match Kay Sievers: update README allow C99 statements fix segfaulting create_floppy_devices update SUSE rules remove unused variables remove default settings in udev.conf clearenv() is now part of klibc add DEVLINKS to the event environment Kurt Garloff: scsi_id: support pre-SPC3 page 83 format Summary of changes from v076 to v077 ============================================ Kay Sievers: merge two consecutive static strlcat's don't return an error, if "ignore_device" is used remove outdated and misleading stuff move SEQNUM event skipping to udevsend update RELEASE-NOTES update SUSE rules allow programs in /lib/udev called without the path update SUSE rules add target to to generate ChangeLog section update Red Hat rules Marco d'Itri: allow to overwrite the configured udev_root by exporting UDEV_ROOT let udevsend ignore events with SEQNUM set update Debian rules Summary of changes from v75 to v076 ============================================ Kay Sievers: fix typo in eventrecorder volume_id: include stddef.h header remove misleading install instructions remove all built-in wait_for_sysfs logic add linux/types.h back, old glibc-kernel-headers want it volume_id: use glibc's byteswap udevd: ignore all messages without DEVPATH udevd: track exit status of event process udevd: export event queue and event state remove "udev_db" option from config file Makefile: remove exec_prefix and srcdir update README and RELEASE-NOTES udevd: track killed event processes as failed update README don't start udevd from udevsend udevd: add a missing return libvolume_id: fix weird fat volume recognition move some helpers from extras to /lib/udev Scott James Remnant: move delete_path() to utils clean-up empty queue directories Makefile: fail, if submake fails Summary of changes from v74 to v075 ============================================ Greg Kroah-Hartman: Make run_directory.c stat the place it is going to try to run. Kay Sievers: forgot the ChangeLog for 074 volume_id: provide libvolume_id.a file remove our own copy of klibc remove outdated HOWTO update TODO update SUSE rules remove completely useless start script fix tests and remove no longer useful stuff replace udeveventrecorder by a shell script Summary of changes from v73 to v074 ============================================ Kay Sievers: never queue events with TIMEOUT set let NAME="" supress node creation, but do RUN keys remove udevinitsend update .gitignore Marco d'Itri: add strerror() to error logs move some logging from dbg() to info() Summary of changes from v72 to v073 ============================================ Kay Sievers: udevd: depend on netlink and remove all sequence reorder logic print useconds in udevmonitor add RELEASE-NOTES, update TODO Summary of changes from v71 to v072 ============================================ Ananth N Mavinakayanahalli: libsysfs: translate devpath of the symlinked class devices to its real path Jan Luebbe: add man pages for *_id programs Kay Sievers: volume_id: add OCFS Version 1 volume_id: add Veritas fs volume_id: check ext fs for valid blocksize, cause magic is only 2 bytes volume_id: move blocksize validation to fix jbd recognition volume_id: fix typo in ocfs volume_id: add vxfs include volume_id: make FAT32 recognition more robust volume_id: Version 051 volume_id: fix typo in ext blocksize check volume_id: Version 052 FAQ: remove confusing statement about module loading cleanup compiler/linker flags use DESTDIR on uninstall, no need to pass prefix to submake allow to pass STRIPCMD, to skip stripping of binaries cleanup make release fix the new warnings I asked for move rules parsing into daemon "make STRIPCMD=" will disable the stripping of binaries remove no longer working udevd-test program "STRIPCMD=" for the EXTRAS add dummy inotify syscalls on unsupported architecture remove no longer needed waiting for "dev" file revert the "read symlink as device patch" use libsysfs to translate the class linke to the device path libsysfs: remove brute-force "bus", "driver" searching for old kernels test: add "driver" and "bus" links to test sysfs tree update RELEASE-NOTES udevd: don't daemonize before initialization log to console if syslog is not available udevd: disable OOM remove precompiled rules option export DEVNAME on "remove" only if we really got a node to remove fix typo in umask() Summary of changes from v70 to v071 ============================================ Greg Kroah-Hartman: Remove the udev.spec file as no one uses it anymore John Hull: edd_id: check that EDD id is unique Kay Sievers: ata_id: open volume O_NONBLOCK add "Persistent Device Naming" rules file for disks scsi_id: switch temporary node creation to /dev volume_id: set reiser instead of reiserfs for filesystem type update devfs rules header update Debian rules update Fedora rules update Debian rules remove no longer needed includes switch tools and volume_id from LGPL to GPLv2 add edd-*-part%n to the persistent.rules update Debian persistent rules clarify README udevd: fix initial timeout handling force event socket buffer size to 16MB udevd: move logging from err to info for non-hotplug uevent fix selinux compilation libsysfs: accept sysmlinks to directories instead of real directories Marco d'Itri: run_directory: fix typo in "make install" Summary of changes from v069 to v070 ============================================ Amir Shalem: udevd: fix udevd read() calls to leave room for null byte Edward Goggin: scsi_id: derive a UID for a SCSI-2 not compliant with the page 83 Greg Kroah-Hartman: fix nbd error messages with a gentoo rule hack fix scsi_id rule in gentoo config file Jürg Billeter: EXTRAS/Makefile: fix install targets to match main Makefile Kay Sievers: volume_id: fix error handling with failing read() EXTRAS: cleanup and sync all Makefiles add install test to 'make buildtest' update RELEASE-NOTES Olivier Blin: fix a debug text typo in udev_rules.c Summary of changes from v068 to v069 ============================================ Amir Shalem: fix typo in firmware_helper Duncan Sands: firmware_helper: fix write count Kay Sievers: *_id: fix zero length in set_str() add program name to logged error fix exit code of udevinitsend and udevmonitor udevd: keep the right order for messages without SEQNUM volume_id: don't probe for mac_partition_maps udevmonitor: cleanup on exit path_id: remove SUSE specific PATH update SUSE rules add pci_express to bus list update SUSE rules store ENV{key}="value" exported keys in the database fix lookup for name in the udevdb, it should return the devpath prepare for new HAL udevdb dump print persistent data with "udevinfo -q all" change parameter order of udev_db_search_name() add and use name_list_cleanup() for cleaning up the string lists don't store devpath in udevdb, we don't need it add uft8 validation for safe volume label exporting start to enforce plain ascii or valid utf8 use WRITE_END/READ_END for the pipe index remove not needed sig_flag for state of signal_pipe don't reenter get_udevd_msg() if message is ignored rename ...trailing_char() to ...trailing_chars() vol_id: ID_LABEL_SAFE will no longer contain fancy characters udevd: move some logging to "info" and "err" remove special TIMEOUT handling from incoming queue udev_test.pl: we replace untrusted chars with '_' check the udevdb before assigning a new %e update RELEASE-NOTES udevinfo: add database export write man page masters in DocBook XML udevinfo: rename dump() to export() test the automatic man page rebuild and checkin Makefile: remove all the duplicated rules all man pages rewritten to use DocBook XML add missing udevsend man page also forgot udevmonitor.8 udevinfo: restore -d option scsi_id: rename SYSFS to LIBSYSFS add edd_id tool to match BIOS EDD disk information move and update libsysfs.txt klibc: update to version 1.1.1 delete cdromsymlinks* - obsoleted by cdrom_id and IMPORT rules delete docs/persistent_naming - obsoleted by persistent disk names delete old Fedora html page add "totally outdated" header to docs/overview :) update SUSE rules fix useless but funny name_cdrom.pl script to work again update TODO Makefile: fix prerequisits for $(PROGRAMS) Makefile: cleanup install targets remove chassis_id program fic gcov use and move it into the Makefile FAQ: update things that have changed Thierry Vignaud: switch to '==' in raid-devfs.sh Summary of changes from v067 to v068 ============================================ Greg Kroah-Hartman: add EXTRAS documentation to the README file. Always open the cdrom drive in non-blocking mode in cdrom_id cdrom_id: change err() to info() to help with debugging problems Kay Sievers: cleanup some debug output and move to info level + unify select() loops move udevmonitor to /usr/sbin ENV{TEST}=="1" compares and ENV{TEST}="1" sets the environment vol_id: fix sloppy error handling fix typo in cdrom_id syslog bring std(in|out|err) fd's in a sane state fix printed udevmonitor header Summary of changes from v066 to v067 ============================================ Greg Kroah-Hartman: added the cdrom.h #defines directly into the cdrom_id.c file Kay Sievers: update SUSE rules fix make install, as we don't provide a default rule set anymore fix more compiler warnings ... fix udevstart event ordering, we want /dev/null very early don't fail too bad, if /dev/null does not exist Summary of changes from v065 to v066 ============================================ Greg Kroah-Hartman: update gentoo rule file. Created cdrom_id program to make it easier to determine cdrom types added cdrom_id to the build check updated gentoo rule file to handle removable ide devices. changed cdrom_id exports to be easier to understand and consistant with other _id programs. fix klibc build issue in cdrom_id.c Change the gentoo rules to use cdrom_id instead of cdsymlink.sh changed location of gentoo helper apps to be /sbin instead of in scripts dir tweak the gentoo rules some more. Kay Sievers: add NETLINK define for the lazy distros read sysfs attribute also from parent class device switch some strlcpy's to memcpy allow clean shutdown of udevd add flag for reading of precompiled rules update distro rules files add SUSE rules update SUSE rules add firmware_helper to load firmware more distro rules updates update README remove example rules and put the dev.d stuff into the run_directory folder trivial text cleanups update SUSE rules split udev_util in several files update SUSE rules allow logging of all output from executed tools add Usage: to udevmonitor and udevcontrol move some logging to the info level Thierry Vignaud: fix udevinfo output Summary of changes from v064 to v065 ============================================ Greg Kroah-Hartman: Added persistent name rules for block devices to gentoo rule file. Added horrible (but fun) path_id script to extras. Update gentoo rules file. Kay Sievers: update release notes for next version add udevmonitor, to debug netlink+udev events at the same time allow RUN to send the environment to a local socket fix GGC signed pointer warnings and switch volume_id to stdint Summary of changes from v063 to v064 ============================================ Andre Masella: volume_id: add OCFS (Oracle Cluster File System) support Hannes Reinecke: usb_id: fix typo add ID_BUS to *_id programs create_floppy_devices: add tool to create floppy nodes based on sysfs info Kay Sievers: move code to its own files make SYSFS{} usable for all devices add padding to rules structure allow rules to have labels and skip to next label thread unknown ENV{key} match as empty value Summary of changes from v062 to v063 ============================================ Anton Farygin: fix typo in GROUP value application Greg Kroah-Hartman: add 'make tests' as I'm always typing that one wrong... Really commit the udev_run_devd changes... Fixed udev_run_devd to run the /etc/dev.d/DEVNAME/ files too fix position of raw rules in gentoo config file Hannes Reinecke: dasd_id: add s390 disk-label prober fix usb_id and let scsi_id ignore "illegal request" Kay Sievers: volume_id: remove s390 dasd handling, it is dasd_id now trivial fixes for *_id programs IMPORT: add {parent} to import the persistent data of the parent device allow multiple values to be matched with KEY=="value1|value2" udevd: set incoming socket buffer SO_RCVBUF to maximum remember mapped rules state ata_id: check for empty serial number compile dasd only on s390 Ville Skyttä: correct default mode documentation in udev Summary of changes from v061 to v062 ============================================ Kay Sievers: fix symlink values separated by multiple spaces update RELEASE-NOTES fix typo in group assignment fix default-name handling and NAME="" rules add WAIT_FOR_SYSFS key to loop until a file in sysfs arrives fix unquoted strings in udevinitsend Summary of changes from v060 to v061 ============================================ Greg Kroah-Hartman: Sync up the Debian rules files fix cdrom symlink problem in gentoo rules Fix ChangeLog titles Kay Sievers: update RELEASE-NOTES we want to provide OPTFLAGS rename ALARM_TIMEOUT to UDEV_ALARM_TIMEOUT udevd: optimize env-key parsing don't resolve OWNER, GROUP on precompile if string contains %, $ set default device node to /dev create udevdb files only if somehting interesting happened pack parsed rules list replace useless defines by inline text move rule matches to function add usb_id program to generate usb-storage device identifiers add IEEE1394 rules to the gentoo rule file fake also kernel-name if we renamed a netif allow OPTIONS to be recognized for /sys/modules /sys/devices events switch gentoo rules to new operators Summary of changes from v059 to v060 ============================================ Greg Kroah-Hartman: Fix the gentoo udev rules to allow the box to boot properly Gustavo Zacarias: Udev doesn't properly build with $CROSS Kay Sievers: Keep udevstart from skipping devices without a 'dev' file Marco d'Itri: #define NETLINK_KOBJECT_UEVENT Summary of changes from v058 to v059 ============================================ Greg Kroah-Hartman: Update the gentoo rule file Fix udevinfo for empty sysfs directories Fix makefile to allow 'make release' to work with git Hannes Reinecke: udev: fix netdev RUN handling udevcontrol: fix exit code Kay Sievers: prepare RELEASE-NOTES add ID_TYPE to the id probers add -x to scsi_id to export the queried values in env format store the imported device information in the udevdb rename udev_volume_id to vol_id and add --export option add ata_id to read serial numbers from ATA drives IMPORT allow to import program returned keys into the env unify execute_command() and execute_program() IMPORT= allow to import a shell-var style config-file allow rules to be compiled to one binary file fix the fix and change the file to wait for to the "bus" link fix udevstart and let all events trvel trough udev prepare for module loading rules and add MODALIAS key remove device node, when type block/char has changed Makefile: remove dev.d/ hotplug.d/ from install target udevcontrol: add max_childs command udevd: control log-priority of the running daemon with udevcontrol udeveventrecorder: add small program that writes an event to disk klibc: add missing files udevinitsend: handle replay messages correctly udev man page: add operators udevd: allow starting of udevd with stopped exec-queue klibc: version 1.0.14 udev: handle all events - not only class and block devices volume_id: use udev-provided log-level udev: clear lists if a new value is assigned udev: move dev.d/ handling to external helper udev: allow final assignments := udevd: improve timeout handling Makefile: fix DESTDIR udevd: add initsend udevd: add udevcontrol udevd: listen for netlink events Stefan Schweizer: Dialout group fix for capi devices in the gentoo rules file Summary of changes from v057 to v058 ============================================ Daniel Drake: o Writing udev rules docs update Darren Salt: o update cdsymlinks to latest version Greg Kroah-Hartman: o remove detach_state files from the sysfs test tree o Update permissions on test scripts so they will run properly now o hopefully fix up the symlinks in the test directory o Removed klibc/klibc.spec as it is autogenerated o Added symlinks thanks to Kay's script and git hacking o add Red Hat/Fedora html documenation o Update Red Hat default udev rules Kay Sievers: o selinux: fix handling during creation of symlinks o Fedora udev.rules update o libsysfs: version 2.0 o klibc: version 1.0.7 Masanao Igarashi: o Fix libsysfs issue with relying on the detach_state file to be Summary of changes from v056 to v057 ============================================ : o fix stupid all_partitions bug Kay Sievers: o add test for make -j4 to build-check o klibc: version 1.0.6 o update Debian rules o apply default permissions only for devices that will need it o adapt RELEASE-NOTES o udev_volume_id: fix endianess macros o udev-test.pl: add test for DEVNAME export to RUN environment o update the man page to reflect the recent changes o export DEVNAME to RUN-key executed programs o fix make -j4 and the local klibc-install o update RELEASE-NOTES o add RUN key to be able to run rule based notification o fix udevtest to print the error if logging is disabled o move execute_program to utils + add action to init_device o correct correction for error path for PROGRAM execution o correct error path for PROGRAM execution o klibc: version 1.0.5 o check for strlen()==0 before accessing strlen()-1 o allow to match against empty key values o read %s{}-sysfs values at any device in the chain o udev_rules.c: don't change sysfs_device while walking up the device chain o klibc: strlcpy/strlcat - don't alter destination if size == 0 o fix klibc's broken strlcpy/strlcat o udevinfo: print SYSFS attribute the same way we match it o remove untrusted chars read from sysfs-values or returned by PROGRAM o udevinfo: print errors to stderr instead of stdout o klibc: version 1.0.4 o support log-priority levels in udev.conf o test-suite: remove UDEV_TEST, it's not needed anymore o libsysfs: remove trailing slash on SYSFS_PATH override Summary of changes from v055 to v056 ============================================ : o fix header paths in udev_libc_wrapper.c Kay Sievers: o udev-test.pl: use more common user/group names o klibc: remove SCCS directories from the temporary klibc install o udev-test.pl: add a test where the group cannot be found in /etc/passwd o udev-test.pl: add check for textual uid/gid o fix bad typo that prevents the GROUP to be applied o udevd: don't delay events with TIMEOUT in the environment o klibc: use klcc wrapper instead of our own Makefile o change call_foreach_file to return a list Summary of changes from v054 to v055 ============================================ : o This patch causes the remove handler to check that each symlink actually points to the correct devnode and skip it if it does not. : o udev selinux fix : o The following patch fixes some warnings when compiling volume_id from udev with the -Wall compiler flag. Define _GNU_SOURCE for strnlen() and correct the path to logging.h o The following patch fixes a warning when compiling chassis_id from udev with the -Wall compiler flag. There are too much conversions in the format string of sscanf(). One %d can be dropped. Greg Kroah-Hartman: o fix raid rules o added frugalware udev ruleset o merge selinux and Kay's symlink fixes together Hannes Reinecke: o volume_id: Fix label/uuid reading for reiserfs Kay Sievers: o add udevstart to the RELEASE-NOTES o volume_id: version 43 o clarify the shortcomings of %e o correct rule match for devices without a physical device o remove unneeded code, libsysfs does this for us o add final release note o add ENV{} key to match agains environment variables o simplify sysfs_pair handling o add a test and simplify debug statement o support =, ==, !=, += for the key match and assignment o add OPTION="last_rule" to skip any later rule o rename namedev_dev to udev_rule o correct enum device_type o remove udevstart on make clean o volume_id: version 42 o volume_id: version 41 o remove unneeded include o The path to dlist.h is not correct o udevinfo -d: use '=' as separator, cause ':' may be a part of the devpath o klibc: version 1.0.3 o add RELEASE-NOTES file o test suite: move "driver" link to physical device o remove PLACE key match o don't lookup "root" in the userdb o fix ia64 compile o fix segfaulting udev while DRIVER matching o cleanup list.h o klibc: version 0.214 o rename device_list->list to device_list->node o replace strncpy()/strncat() by strlcpy()/strlcat() o split udev and udevstart o udev_volume_id: version 39 o rename LOG to USE_LOG in all places o remove Makefile magic for klibc integration o klibc_fixups: remove no longer needed stuff o udev_volume_id: volume_id v38 o use numeric owner/group as default values to avoid parsing userdb o fix up segfaulting binaries with new klibc o udevinfo -d: speed-up device dump o klibc: version 0.211 o klibc_fixups: remove unneeded stuff o replace weird defines by real code o udev-test.pl: remove useless tests o allow unlimitied count of symlinks o unmap db-file after use o remove typedef for call_foreach_file() handler function o correct udev_init_device o rename attributes to options o kill stupid gcc4 warning o trivial clenaup of namedev code o klibc: check for gcc4 o klibc: update v0.205 Thierry Vignaud: o gentoo rule update for raid devices Summary of changes from v053 to v054 ============================================ : o udev_volume_id: add Reiser4 support Kay Sievers: o namedev: skip backslashes only if followed by newline o wait_for_sysfs: add joydev o udevinfo: print devpath -> node relationship for all devices o trivial rename of some variables o klibc v0.199 o big libsysfs diet (pre 2.0 version) o udev_volume_id: volume_id v35 o add "serio" to bus list o determine device type in udev_init_device() o move kernel name/number evaluation into udev_init_device() o detect NAME="" as ignore_device rule o trivial namedev cleanup o cleanup db functions o clean up match_place() o switch device type to enum o switch major/minor to dev_t o remove the device node only if the major/minor number matches o libsysfs: work around a klibc bug o introduce OPTIONS=ignore_device, ignore_remove, all_partitions" key o namedev: execute PROGRAM only once and not possibly for every physical device Patrick Mansfield: o update scsi_id to work with libsysfs changes Summary of changes from v052 to v053 ============================================ Greg Kroah-Hartman: o fix gentoo fb permission issue o allow simple-build-check.sh to go faster if MAKEOPTS is set o make the release tarballs have writable files in them o remove gentoo permission file as it's not valid anymore Kay Sievers: o fix special file mode mask for temporary device node o udevstart: simplify "dev" file searching o udev_volume_id: remove temporary node creation and parent handling o add %P modifier to query the node name of the parent device o udev_volume_id: remove __packed__ from dasd structure as it does not work o create /block/*/range count of partitons for all_partitions Patrick Mansfield: o scsi_id changes for use with udev %N and %p Summary of changes from v051 to v052 ============================================ : o debian: update rules files o raid-devfs.sh: devfs names for hardware RAID controllers o scsi_id: when udevstart is started, /tmp is not writeable o cdsymlinks.sh: trivial fix, the variable is initialized to '', not 0 : o gentoo/udev.rules: add default permissions for sound devices Greg Kroah-Hartman: o fix example comment in ide-devfs.sh o Add infiniband to gentoo rules o Another gentoo fix, adding dvb support o Fix gentoo bug #76056 (fb device group permissions.) o Fix gentoo bug #81102, device nodes for the pktcdvd device Kay Sievers: o provide temporary device node for callouts to access the device o udev_volume_id: fix dasd disklabel reading with -l option o udev_volume_id: volume_id version 034 o udev_volume_id: rename probe_ibm into probe_dasd o udev_volume_id: volume_id version 032 o Makefile: add some more warnings and prepare for clean gcc4 compile o Makefile: cleanup conditional config option sections o fix -Wsign-compare warnings o chassis_id: clean compilation and fix bad function parameter passing o simple_build_check: make it possible to pass KERNEL_DIR o selinux: cleanup udev integration Michael Buesch: o trivial: remove _all_ trailing slashes with no_trailing_slash() o trivial: fix signedness o namdev: allow symlink-only rules to specify node permissions o udevd: fix valgrind warning Summary of changes from v050 to v051 ============================================ : o This fixes a silly mistake in how udevinfo prints the major and minor numbers (right now it prints the minor next to "MAJOR" and the major next to "MINOR" ;) : o I tried to compile udev 050plus with the GCC 4.0 snapshot 200412119 and got two errors about possibly uninitialized structs, so I fixed this. Christian Bornträger: o udev_volume_id: fix -d option Greg Kroah-Hartman: o gentoo fb permission fix o fix gcc 2.96 issue in libsysfs o remove the lfs startup script on request of the author o clean up the aoe char device rules, and delete the block one as it's not needed o add aoe block and char device rules to the gentoo rule file o fix udev_volume_id build error Hannes Reinecke: o rearrange link order in Makefile Kay Sievers: o udev_volume_id: new version of volume_id o klibc: update to version 0.198 o udev_volume_id: fix FAT label reading o klibc: update to version 0.196 o udevd: throttle the forking of processes o udevd: add possible initialization of expected_seqnum o udevd: it's obviously not the brightest idea to exit a device node manager if it doesn't find /dev/null o udevd: separate socket handling to prepare for other event sources o udevd: support -d switch to become a daemon o udev_volume_id: version 27 o udevd: split up message receiving an queueing o remove useless warning if udev.conf contains keys not read by udev itself o improve event sequence serialization o remove udevsend syslog noise on udevd startup o limit the initial timeout of the udevd event handling o correct detection of hotplug.d/ udevsend loop o correct log statement o remove default_* permissions from udev.conf file o update Fedora config files and add some more tests o allow permissions only rules o add SUBSYSTEM rule to catch all block devices and apply the disk permissions o update Fedora config files o handle renamed network interfaces properly if we manage hotplug.d/ o allow multiline rules by backslash at the end of the line o add OnStream tape drive rules o simplify rules file by setting default mode to 0660 o simplify permission application o I broke the extras/ again. Add simple build test script now o Merge vrfy.org:/home/kay/src/udev into vrfy.org:/home/kay/src/udev.kay o initial merge of fedora udev.permissions into udev.rules o remove permissions file mentioning from the udev man page o fix some typos in gentoo's udev.rules introduced by the merge Michael Buesch: o The attached patch fixes the code path if namedev_name_device() fails Summary of changes from v049 to v050 ============================================ : o selinux patch : o I made some more changes to the manpage of udev including Kay Sievers: o update libsysfs to CVS version and fix segfaulting attribute reading o klibc supports LOG_PID now, so remove our own implementation o avoid building klibc test programs and pass SUBDIRS= to klibc clean Summary of changes from v048 to v049 ============================================ Greg Kroah-Hartman: o fix 'make clean' error in klibc Kay Sievers: o update klibc to 0.194 o export DEVNAME regardless of the state of udev_dev_d o add class specific files for class/spi_transport and class/spi_host o udevd-test.pl: remove wrong date calculation o check earlier if we should run as udevstart o remove double initialization o include missing header to udevtest.c o add -V option to udev to print the version number o prevent udev node creatinon for "class" registration o udevd: serialization of the event sequence of a chain of devices o add a class/fc_host file to the list of what to wait for o udev_volume_id: links sysfs.a instead of all objects Martin Schlemmer: o remove leftover from udevinfo's -d option Summary of changes from v047 to v048 ============================================ Greg Kroah-Hartman: o fix udev_volume_id so it will now build properly o fix scsi_id build errors due to changes in the main udev makefile Summary of changes from v046 to v047 ============================================ : o Various typos and other litte errors in udev.8.in : o DEVNAME on device removal : o Allow GROUP to have modifiers in it Greg Kroah-Hartman: o add more debian rules files o move distro specific config files into their own directories o update debian rules files o added asterix rules to the gentoo file o use udevstart for udev.init.* files o delete a bunch of files no longer needed o fix gentoo scsi cdrom rule o Fix the multithreaded build again o merge o comment out ability to run udev-test.pl with valgrind o fix spurious valgrind warning in udev o fix udevinfo '-q path' option as it was not working o merge o fix parallel build error Kay Sievers: o update Fedora dev.d/ example and remove unused conf.d/ directory o don't install distribution specific init script on "make install" o restore OWNER/GROUP assignment in rule coming from RESULT o make gcov compile scripts working with recent gcc o fix udev-test/udev-test.pl to work with again o add net/atml and class/ppdev to the wait_for_sysfs exception list o add net/nlv* devices to the exception list o add "pcmcia" and "fc_transport" to the wait_for_sysfs lists o remove unused timestamp field o simplify permission handling o handle /etc/hotplug.d/ only if the event comes from udevd o trivial cleanups and change some comments o remove unused variables o udevsend/udevd handle events without a subsystem o use blacklist on device "remove" and remove dev.d/ call code duplication o update the man pages and correct Usage: hints o don't call the hotplug scripts with a test run o don't call dev.d/ scripts twice, if directory = subsystem o remove archive file if we changed something o link archive insted of objects o rename udev_lib to udev_utils and dev_d to udev_multiplex o handle whole hotplug event with udevd/udev o integrate wait_for_sysfs in udev o make the searched multiplex directories conditionally o add MANAGED_EVENT to the forked udev environment o export DEVNAME on remove event o export udev_log flag to the environment o remove my test code o add support for /devices-devices without any file to wait for o Patch from Alex Riesen o add a bunch of busses to the list of what to wait for o close connection to syslog in forked udevd child o udevd exit path cleanup o fix network device naming bug Summary of changes from v045 to v046 ============================================ Greg Kroah-Hartman: o make spotless for releases Kay Sievers: o Don't try to print major/minor for devices without a dev file o remove get_device_type and merge that into udev_set_values() o prevent udevd crash if DEVPATH is not set o add ippp and bcrypt to the exception lists of wait_for_sysfs o let klibc add the trailing newline to syslog conditionally o disable logging for udevstart o add NAME{ignore_remove} attribute o remove historical SYSFS_attr="value" format o don't wait for sysfs if the kernel(2.6.10-rc2) tells us what not to expect o change key names in udevinfo sysfs walk to match the kernel o support DRIVER as a rule key o support SUBSYSTEM as a rule key o rename udevdb* to udev_db* o Make dev.d/ handling a separate processing stage o make the udev object available to more processing stages o remove udev_lib dependency from udevsend, which makes it smaller o add ACTION to udev object to expose it to the whole process o make udevinfo's -r option also workimg for symlink queries o let udev act as udevstart if argv[1] == "udevstart" o improve udevinfo sysfs info walk o add sysfs info walk to udevinfo o pass the whole event environment to udevd o replace tdb database by simple lockless file database Summary of changes from v044 to v045 ============================================ Martin Schlemmer: o Some updates for Gentoo's udev rules Summary of changes from v043 to v044 ============================================ Greg Kroah-Hartman: o add cdsymlinks.sh support to gentoo rules file o fix gentoo legacy tty rule o remove 'sudo' usage from the Makefile o make udev-test.pl test for root permissions before running Kay Sievers: o reduce syslog noise of udevsend if multiple instances try to start udevd o add i2c-dev to the list of devices without a bus Summary of changes from v042 to v043 ============================================ Greg Kroah-Hartman: o add test target to makefile o add dumb script to show all sysfs devices in the system Kay Sievers: o Shut up wait_for_sysfs class/net failure messages, as it's not possible to get that right for all net devices. Kernels later than 2.6.10-rc1 will handle that by carrying the neccessary information in the hotplug event. o wait() for specific pid to return from fork() o Don't use any syslog() in signal handler, cause it may deadlock o Add support for highpoint ataraid to volume_id to suppress label reading on raid set members. o Add a bunch of devices without "device" symlinks o Exit, if udevtest cannot open the device (segfault) o Patches from Harald Hoyer o Apply the default permissions even if we found a entry in the permissions file. Correct one test, as the default is applied correctly now and the mode will no longer be 0000. o add test for format chars in multiple symlinks to replace o Add net/vmnet and class/zaptel to the list of devices without physical device Summary of changes from v040 to v042 ============================================ Greg Kroah-Hartman: o add inotify to the rules for gentoo Kay Sievers: o skip waiting for device if we get a bad event for class creation and not for a device underneath it o add net/pan and net/bnep handling o switch wait for bus_file to stat() instead of open() add net/tun device handling add ieee1394 device handling o Remove the last klibc specific line from the main udev code Move _KLIBC_HAS_ARCH_SIG_ATOMIC_T to the fixup file which is automatically included by the Makefile is we build with klibc o ignore *.rej files from failed patches o update to libsysfs 1.2.0 and add some stuff klib_fixup Now we have only the sysfs.h file different from the upstream version to map our dbg() macro. o improve klibc fixup integration o cleanup udevd/udevstart o expose sysfs functions for sharing it Summary of changes from v039 to v040 ============================================ : o wait_for_sysfs update for dm devices Greg Kroah-Hartman: o sparse cleanups on the tree o fix stupid cut-and-paste error for msr devices on gentoo boxes o add *~ to bk ignore list o delete udevruler.c as per Kay's request o fix up the wait_for_sysfs_test script a bit Kay Sievers: o fix debug in volume id / fix clashing global var name o volume_id fix o $local user o cleanup netif handling and netif-dev.d/ events o big cleanup of internal udev api o don't wait for dummy devices o close the syslog o Fix ppp net devices in wait_for_sysfs o Fix wait_for_sysfs messages (more debugging info) Summary of changes from v038 to v039 ============================================ Greg Kroah-Hartman: o Hopefully fix the vcs issue in wait_for_sysfs o take out & from wait_for_sysfs_test that I previously missed o add very nice cdsymlinks scripts o add some helper scripts for dvb and input devices o add debian config files o let the extras/ programs build "pretty" also o tweak the ccdv program to handle files in subdirectories being built o crap, I messed up the 'sed' instances pretty badly, this fixes the config and man page mess o fix broken 'make -j5' functionality Kay Sievers: o swich attribute open() to simple stat() o wait_for_sysfs update for /class/firmware and /class/net/irda devices o fix unusual sysfs behavior for pcmcia_socket o remove sleeps from udev as it is external now o delete udevruler? o Makefile fix Patrick Mansfield: o update udev to scsi_id 0.7 o pass SYSFS setting down for extras builds o move assignments past local variables Summary of changes from v037 to v038 ============================================ : o Re: Problem parsing %s in udev rules Greg Kroah-Hartman: o fix up error in building extras and libsysfs Summary of changes from v036 to v037 ============================================ : o small udev patch Greg Kroah-Hartman: o fix compilation warning in tdb log message o Fix build error with klibc due to recent changes o merge o add wait_for_sysfs test script to the tarball to help people debug their boxes o add ipsec to wait_for_sysfs ignore list o added ccdv to bk ignore list o a few more Makefile tweaks for the quiet feature o Make the build silent, thanks to a helper program from ncftp o rename files to have '_' instead of '-' in them o change max time to wait in wait_for_sysfs to 10 seconds to hopefully handle some slow machines o add support for class/raw/ to wait_for_sysfs o fix up Makefile for wait_for_sysfs udev_version.h dependancy o remove the debian specific file, as they don't want to share with the rest of the world :( Kay Sievers: o prevent deadlocks on an corrupt udev database o wait_for_sysfs_update Michael Buesch: o fix asmlinkage o fix incompatible pointer type warning Summary of changes from v035 to v036 ============================================ Greg Kroah-Hartman: o add the error number to the error message in wait_for_sysfs to help out in debugging problems Summary of changes from v034 to v035 ============================================ Greg Kroah-Hartman: o added ieee1394 support to wait_for_sysfs o update wait_for_sysfs with a bunch more devices thanks to user reports Summary of changes from v033 to v034 ============================================ Kay Sievers: o wait_for_sysfs bluetooth class update Greg Kroah-Hartman: o add comment in wait_for_sysfs to explain the structure better o Revert previous dev_d.c change, it's not what is causing HAL problems o hm, somethings odd with DEVPATH, see if this fixes it o 33_bk mark for the makefile o wait_for_sysfs: clean up the logic for the list of devices that we do not expect device symlinks for o get rid of annoying extra lines in the syslog for some libsysfs debug messages o added support for i2c devices in wait_for_sysfs.c o add support for i2c-adapter devices to wait_for_sysfs.c Summary of changes from v032 to v033 ============================================ : o udev close on exec o some cleanups and security fixes o some cleanups and security fixes o selinux for udev o cleanup PATCH for extras/chassis_id/Makefile : o respect prefix= setting in built udev.conf (updated) Greg Kroah-Hartman: o add support for usb interfaces to wait_for_sysfs to keep it quiet o enable native tdb spinlocks on i386 platforms o delete extras/multipath-tools as per the author's request o be paranoid in dev_d.c o add USE_SELINUX to README documentation so people have a chance to see what is going on o update the selinux.h file to start to look sane o update bk ignore list for the wait_for_sysfs binary o kdetv wants to see device nodes in /dev o update comments in scsi-devfs.sh o fix up Makefiles to get the klibc build working properly o update bk ignore list for new klibc generated files o oops forgot to add the new klibc/include directory o update klibc to version 0.181 Kay Sievers: o fix problems with dev.d and udevstart o wait_for_sysfs debug cleanup o fix problems using scsi_id with udevstart o update volume_id o finally solve the bad sysfs-timing for all of us o volume-id build fix and update o switch udev's seqnum to u64 o add enum tests o fix udev segfaults with bad permissions file Patrick Mansfield: o update udev to include scsi_id 0.6 Summary of changes from v031 to v032 ============================================ : o udev parse bug Kay Sievers: o handle only block and class devices o fix udevstart badly broken in udev 031 Summary of changes from v030 to v031 ============================================ : o udev - read long lines from config files overflow fix : o Update the FAQ with info about hardlink security : o compatibility symlinks for udev David Weinehall: o Minor POSIX-fixes for udev Greg Kroah-Hartman: o add symlink for video rule o add a "first" list to udevstart and make it contain the class/mem/ devices o fix compiler warning in udevtest.c o Fix old-style pty breakage in rules file for tty device o add rules for i386 cpu devices o add permission for legotower usb devices Kay Sievers: o Fix naming ethernet devices in udevstart o update udev_volume_id o let /sbin/hotplug execute udev earlier o pass SEQNUM trough udevd o fix manpages based on esr's spambot Martin Schlemmer: o add microcode rule to permissions.gentoo file Michael Buesch: o Try to provide a bit of security for hardlinks to /dev entries Olaf Hering: o udevsend depends on udev_lib.o Tom Rini: o fix UDEV_NO_SLEEP o clean up start_udev a bit o Make udev/udevstart be one binary o Add 'asmlinkage' to udev-030 Summary of changes from v029 to v030 ============================================ Greg Kroah-Hartman: o fix stupid off-by-one bug that caused udevstart to die on x86-64 boxes Summary of changes from v028 to v029 ============================================ Greg Kroah-Hartman: o add permission rule for jogdial device o fix dumb bug I added to udevstart o make a "last list" of devices for udevstart to operate on last o fix permission problem with input event and ts nodes for gentoo o change default perms of misc/rtc to be readable by anyone Olaf Hering: o allow NAME_SIZE > SYSFS_PATH_MAX Summary of changes from v027 to v028 ============================================ : o Patch for chassis_id exras module Daniel Drake: o Writing udev rules doc update Greg Kroah-Hartman: o clean up block whitelist search logic a bit o reverse order of scanning of udevstart to look at class before block Kay Sievers: o update udev_volume_id Leann Ogasawara: o udevstart performance increase Patrick Mansfield: o update udev scsi_id to scsi_id 0.5 Summary of changes from v026 to v027 ============================================ : o fix handle leak in udev_lib.c Greg Kroah-Hartman: o tweak the gentoo default permission rules as they are wrong for tty and misc devices Summary of changes from v025 to v026 ============================================ Arnd Bergmann: o udev rpm fix Greg Kroah-Hartman: o add test for ! in partition name o 025_bk mark o Update to version 117 of klibc (from version 108) o add volume_id ignore rule for bk o add volume_id support to the udev.spec file o remove dbus and selinux stuff from the udev.spec file o delete udev_selinux as it doesn't work properly and is the wrong way to do it o Deleted the udev_dbus extra as it didn't really work properly and HAL has a real solution now o add udev.permissions.slackware file o udevstart: close open directories Kay Sievers: o fix udevd zombies o catchup with recent klibc o Re: udevsend fallback o udev_volume_id update o udev callout for reading filesystem labels o udev callout for reading filesystem labels o udev default config layout changes Leann Ogasawara: o evaluate getenv() return value for udev_config.c Summary of changes from v024 to v025 ============================================ : o devfs.sh-ide-floppy : o DEVNODE -> DEVNAME transition fixes Daniel Drake: o Update writing udev rules docs Greg Kroah-Hartman: o make dev.d call each directory in the directory chain of the device name, instead of just the whole name o add devd_test script o add more permissions based on SuSE's recommendations o added rules for tun and raw devices o add udev conf.d file o Switch the default config to point to a directory for the rules and permission files o update the Red Hat .dev files to work on other distros o add dbus.dev, pam_console.dev and selinux.dev files for /etc/dev.d/default/ usage o add hints for red hat users from Leann Ogasawara o add scripts to run gcov for udev from Leann Ogasawara o change permissions on udevd test scripts o Fix build process for users who have LC_ALL set to a non-english language o Added expanded tests to the test framework from Leann Ogasawara o added execelent "writing udev rules" document from Daniel Drake o added rule to put USB printers in their proper places o added rules for CAPI devices o added a dev.d alsa script to help people out Kay Sievers: o fix test regressions o udev_selinux changes o udevd test script o udev_dbus changes o fix devpath for netdev Leann Ogasawara: o gcov for udev Summary of changes from v023 to v024 ============================================ : o Add README for chassis_id o Add chassis_id program to extras directory : o udevd race conditions and performance, assorted cleanups : o fix SEGV in libsysfs/dlist.c : o add OSDL documentation for persistent naming : o small ide-devfs.sh fix Greg Kroah-Hartman: o remove compiler warning from udevd.c o only generate udev.8 on the fly, not all other man pages o update bk ignore list some more o update bk ignore list o switch to generate the man pages during the normal build, not during the install o convert udev.8.in to use @udevdir@ macro for make install o first step of making man pages dynamically generated o add install and uninstall the etc/dev.d/net/hotplug.dev file to the Makefile o tweak net_test a bit o fix some segfaults when running udevtest for network devices o make a net_test test script using udevtest o handle the subsytem if provided in udevtest o add hotplug.dev script to handle renamed network devices o add a bunch of network class devices to the test sysfs tree o add udevruler to the bk ignore list o update RFC-dev.d docs due to DEVNODE to DEVNAME change o clean up chassis_id coding style o clean up the OSDL document formatting a bit o add netlink rules to devfs and gentoo rules files o added USB device rules to rules files o clean up the gentoo rules file a bit more, adding dri rules o fix up udev.rules to handle oss rules better o 023_bk mark o fix udev.spec file for where udevtest should be placed Kay Sievers: o tweak node unlink handling o switch udevd's msg_dump() to #define o handle netdev in udevruler o man page cleanup o put config info in db for netdev o increase udevd event timeout o udevstart fix o put netdev handling and dev.d/ in manpages o DEVPATH for netdev o netdev - udevdb+dev.d changes o udevd race conditions and performance, assorted cleanups - take 2 o udevinfo patch o dev_d.c file sorting and cleanup o apply all_partitions rule to main block device only Summary of changes from v022 to v023 ============================================ Kay Sievers: o hmm, handle net devices with udev? o correct apply_format() for symlink only rules o don't init namedev on remove o first stupid try for a rule compose gui o replace fgets() with mmap() and introduce udev_lib.[hc] o make udevtest a real program :) Daniel E. F. Stekloff: o udevinfo patch Greg Kroah-Hartman: o create the /etc/dev.d/ directories in 'make install' o actually have udev run files ending in .dev in the /etc/dev.d/ directory as documented o added RFC-dev.d document detailing how /etc/dev.d/ works o fixed up udev.spec to handle selinux stuff properly now o remove USE_DBUS and USE_SELINUX flags from the README as they are no longer present o remove selinux stuff from the main Makefile o move udev_selinux into extras/selinux o fix dbus build in the udev.spec file o remove dbus stuff from main Makefile o move udev_dbus to extras/dbus o udev_dbus can now compile properly, but linnking is another story o remove udev_dbus.h from Makefile o first cut at standalone udev_selinux program o remove selinux support from udev core as it's no longer needed o first cut at standalone udev_dbus program o add get_devnode() helper to udev_lib for udev_dbus program o remove dbus code from core udev code as it's no longer needed to be there o add /etc/dev.d/ support for udev add and remove events o fix build error in namedev.c caused by previous patch o 022_bk tag o fix 'make spotless' to really do that in klibc o add a question/answer about automounting usb devices to the FAQ o mark scsi-devfs.sh as executable o Increase the name size as requested by Richard Gooch o fix udevtest to build properly after the big udev_lib change Olaf Hering: o uninitialized variable for mknod and friend Richard Gooch: o SCSI logical and physical names for udev Theodore Y. T'so: o Trivial man page typo fixes to udev Summary of changes from v021 to v022 ============================================ : o more Libsysfs updates o Libsysfs updates : o fix HOWTO-udev_for_dev for udevdir Kay Sievers: o udev-test.pl cleanup o add dev node test to udev-test.pl o add permission tests o "symlink only" test o callout part selector tweak o cleanup callout fork o allow to specify node permissions in the rule o man page beauty o put symlink only rules to the man page o rename strn*() macros to strmax o conditional remove of trailing sysfs whitespace o clarify udevinfo text o better fix for NAME="foo-%c{N}" gets a truncated name o overall trivial trivial cleanup o fix NAME="foo-%c{N}" gets a truncated name o cleanup mult field string handling : o fix a type in docs/libsysfs.txt o Added line to udev.permissions.redhat o Include more examples in the docs area for gentoo and redhat : o udevstart fixes Greg Kroah-Hartman: o add big major tests to udev-test.pl o add a test for a minor over 255 o udev-test.pl: print out major:minor and perm test "ok" if is ok o make perm and major:minor test errors be reported properly o remove extra ; in namedev_parse.c o Added multipath-tools 0.1.1 release o deleted current extras/multipath directory o 021_bk mark o fix the build for older versions of gcc Hanna V. Linder: o Small fix to remove extra "will" in man page Olaf Hering: o make spotless o udev* segfaults with new klibc Patrick Mansfield: o add tests for NAME="foo-%c{N}" Summary of changes from v020 to v021 ============================================ Kay Sievers: o install udevinfo in /usr/bin o blacklist pcmcia_socket Greg Kroah-Hartman: o fix udev.spec to find udevinfo now that it has moved to /usr/bin o Fix another problem with Makefile installing initscript o fix the Makefile to install the init script into the proper directory o make spec file turn off selinux support by default Summary of changes from v019 to v020 ============================================ : o multipath update Kay Sievers: o man page udevstart o cleanup udevstart o bugfix for local user o unlink bugfix o TODO update o clarify udevinfo device walk o udevinfo symlink reverse query o fix stroul endptr use o add $local user spport for permissions o udev - man page update o udev - fix debug info for multiple rule file config o udev - kill udevd on install o udev - activate formt length attribute o udev - safer sprintf() use : o no error on enoent o escape dashes in man pages o remove usage of expr in ide-devfs.sh : o automatically install correct initscript o update documetation for $local Andrey Borzenkov: o Add symlink only rules support Greg Kroah-Hartman: o update the TODO list as we already have a devfs config file o make start_udev use udevstart binary o install udevstart o Remove Debian permission files as the Debian maintainer doesn't seem to want to share :( o update the Gentoo rules files o Add Red Hat rules and permissions files o add udevstart to the ignore list o add udevstart program based on a old patch from Harald Hoyer o unlink the file before we try to create it o Merge greg@bucket:/home/greg/src/udev into kroah.com:/home/greg/src/udev Summary of changes from v018 to v019 ============================================ Kay Sievers: o TODO update o udev - correct relative symlink o udev - safer string handling - part four o udev - safer string handling - part three o udev - safer string handling - part two o udev - man page update o udev - safer string handling all over the place o manpage update o udev - allow all files in a directory as the config o udev - simple klibc textual uid/gid handling Andrey Borzenkov: o do not remove real .udev.tdb during RPM build Greg Kroah-Hartman: o add new TODO item about local user permissions o Add initial SELinux support for udev o fix build for very old versions of make o remove limit of the number of args passed to PROGRAM o force udev to include the internal version of libsysfs and never the external one o fix up libsysfs header file usage to fix bug reports from users that have sysfsutils installed already o remove udevtest on 'make clean' o remove udevd priority TODO item, as it's not needed at all Patrick Mansfield: o update udev scsi_id to scsi_id 0.4 Summary of changes from v017 to v018 ============================================ : o [PATCH] symlink dm-[0-9]* rule o update extras/multipath : o init.d debian patch Kay Sievers: o udev - TODO update o udev - add %s{filename} to man page o udev - udevd/udevsend man page o udev - switch callout part selector to {attribute} o udev - switch SYSFS_file to SYSFS{file} o udev - create all partitions of blockdevice o allow SYSFS{file} o Adding '%s' format specifier to NAME and SYMLINK Greg Kroah-Hartman: o added some scsi_id files to the bk ignore file o added scsi_id and some more documentation to the udev.spec file o update udev.rules.gentoo with new config file format o Update the Gentoo udev.rules and udev.permissions files o Create a udev.rules.examples file to hold odd udev.rules o add udevd priority issue to the TODO list o more HOWTO cleanups o add HOWTO detailing how to use udev to manage /dev o mv libsysfs/libsysfs.h to libsysfs/sysfs/libsysfs.h to make it easier to use o add start_udev init script o add support for UDEV_NO_SLEEP env variable so Gentoo people will be happy o start up udevd ourselves in the init script to give it some good priorities o update the red hat init script to handle nodes that are not present o add a "old style" SYSFS_attribute test to udev-test.pl o Have udevsend report more info in debug mode o Have udevd report it's version in debug mode o fix up bug created for udevtest in previous partition creation patch o update the udev.spec to add udevtest and make some more Red Hat suggested changes o add ability to install udevtest to Makefile o 017_bk mark o Add another test to udev-test.pl and fix a bug when only running 1 test o Fix bug where we did not use the "converted" kernel name if we had no rule Patrick Mansfield: o udev use new libsysfs header file location o udev add some ID tests Summary of changes from v016 to v017 ============================================ : o make logging a config option : o more udev-016/extras/multipath o more udev-016/extras/multipath o update extras/multipath Kay Sievers: o udev - keep private data out of the database? o better credential patch o udevd - client access authorization o compile udevd with klibc o udev - fix "ignore method" o udev - fix cdrom symlink rule o convert udevsend/udevd to DGRAM and single-threaded o udevd - kill the lockfile o udevd - fix socket path length o udevd - switch socket path to abstract namespace o udevd - allow to bypass sequence number o include used function Greg Kroah-Hartman: o add udev_log to the documentation o fix offsetof() define in klibc o add some .spec file changes from Red Hat o update the init.d udev script based on a patch from Red Hat o remove the .udev.tdb when installing or uninstalling to be safe o remove the database at startup o fix bug in permission handling o update klibc to version .107 o update the bitkeeper ignore file list o add udevtest program to build o fix problem where usb devices can be either the main device or the interface o more logging.h cleanups to be a bit more flexible o stop using mode_t as different libcs define it in different ways :( o remove some more KLIBC fixups that are no longer needed o let udev-test.pl run an individual test if you ask it to o Handle the '!' character that some block devices have o add a block device with a ! in the name, and a test for this o fix up 'make release' to use bk to build the export tree o fix log option code so that it actually works for all udev programs o finish syncing up with klibc o sync with latest version of klibc (0.107) o fix up Makefile dependancies for udev_version.h Patrick Mansfield: o udev add wild card compare for ID o udev kill extra bus_id compares in match_id Summary of changes from v015 to v016 ============================================ : o get_dev_number() in extras/ide-devfs.sh : o FAQ udev.rules.devfs Greg Kroah-Hartman: o add udevd and udevsend to the spec file o make /etc/hotplug.d/default/udev.hotplug symlink point to udevsend now o add KERNEL_DIR option so that the distros will be happy o make udevsend binary even smaller o udevsend now almost compiles with klibc, struct sockaddr_un is only problem now o fix up logging code so that it can be built without it being enabled o rework the logging code so that each program logs with the proper name in the syslog o remove logging.c as it's no longer needed o kill the last examples that contained the %D option o remove a __KLIBC__ tests in libsysfs, as klibc now supports getpagesize() o udevd - remove stupid locking error I wrote o update to klibc version 0.101, fixing the stdin bug o fix Makefile typo for USE_LSB install o allow dbus code to actually build again Kay Sievers: o let udevsend build with klibc o udevd - config cleanup o udevd - cleanup and better timeout handling o fix possible buffer overflow o udevd - next round of fixes o udevinfo - missing options for man page o udev - trivial style cleanup Summary of changes from v014 to v015 ============================================ : o LFS init script update Greg Kroah-Hartman: o update klibc to version 0.98 o clean up udevinfo on 'make clean' o add udevinfo man page to spec file o remove command line documentation from udev man page o create initial version of udevinfo man page o added URL to spec file o add udevinfo to udev.spec file o add udevinfo to install target of Makefile o rip out command line code from udev, now that we have udevinfo o udevinfo doesn't need to declare main_envp o move get_pair to udev_config.c because udevinfo doesn't need all of namedev.o o more makefile cleanups o move udevinfo into the main build and clean up the main Makefile a bit o clean up compiler warnings if building using klibc o make udevd only have one instance running at a time o new testd.block script for debugging o udevsnd : clean up message creation logic a bit o make bk ignore udevd and udevsend binaries o whitespace cleanups o remove TODO item about BUS value, as it is now done o add support for figuring out which device on the sysfs "chain" the rule applies to Kay Sievers: o udevinfo - now a real program :) o udevd - cleanup and better timeout handling o udev - next round of udev event order daemon o fix udevd exec o udev - udevinfo with device chain walk o spilt udev into pieces Summary of changes from v013 to v014 ============================================ : o libsysfs update for refresh + namedev.c changes : o udev-013/extras/multipath update : o minor patch for devfs rules Kay Sievers: o udev - program to query all device attributes to build a rule o set default owner/group in db - update o udev - reverse user query options o udev - kill %D from udev-test.pl o add udev logging to info log o udev - mention format string escape char in man page Greg Kroah-Hartman: o misc code cleanups o fixup logging.h to handle different logging options properly o clean up the logging patch a bit to make the option more like the other options o remove the %D modifier as it is not longer needed o remove unneeded keyboard rule o add usb_host and pci_bus to the class blacklist o added input device rules to udev.rules and udev.rules.devfs o 013_bk mark Hanna V. Linder: o set default owner/group in db o small cut n paste error fix Patrick Mansfield: o update udev scsi_id to scsi_id 0.3 Summary of changes from v012 to v013 ============================================ : o LSB init script and other stuff : o fix udev directory for Debian init script : o udev 012 old gcc fixup Christophe Saout: o add IGNORE rule type o small cleanup Greg Kroah-Hartman: o update TODO with some new, small items o Cset exclude: greg@kroah.com|ChangeSet|20040113010256|48515 o update the README in a few places o fix -d typo in the manpage update o Fix stupid gcc "optimization" of 1 character printk() calls.... Ick o oops, forgot to fix up the PROGRAM result from ID to RESULT in the config files o Add alsa device rules and a few other devfs rules o fix a few stale comments in namedev.c o convert the default rules files to the new format o convert the test shell scripts to the config file format o add bus test for usb-serial bus o Add some helpful messages if the user uses the older config file format o added dri rule to the default config file o added init.d udev script for debian o add a script that tests the IGNORE rule o add silly script that names cdrom drives based on the cd in them o add cdrom rule for ide cdrom o replace list_for_each with list_for_each_entry, saving a few lines of code o add a blacklist of class devices we do not want to look at Kay Sievers: o fix klibc with printf() and gcc o udev - small script optimization o udev - introduce format escape char o udev - more CALLOUT is PROGRAM now o udev - CALLOUT is PROGRAM now o update documentation for new config file format o more advanced user query options o udev - simple debug tweak o udev - drop all methods :) o udev - advanced user query options o udev - Makefile error o udev - make exec_callout() reusable o udev - exec status fix for klibc o fix Silly udev script Summary of changes from v011 to v012 ============================================ : o make symlink work properly if there is already a file in its place o Fix udev gcc-2.95.4 compat : o extras multipath update o extras multipath update Kay Sievers: o mention user callable udev + options in man page o make udev user callable to query the database o depend on all .h files o cleanup namedev_parse debug text o extend exec_program[] o ide-devfs.sh update o fix for apply_format() o check for empty symlink string o 'ide' missing in bus_files[] o small trivial cleanup of latest changes : o introduce signal handler : o udev spec file update Greg Kroah-Hartman: o minor grammer fixes for the udev_vs_devfs document o move the dbus config file to etc/dbus-1/system.d/ o move the config files to etc/udev to clean up main directory a bit o add Gentoo versions of the rules and permissions files o if using glibc, link dynamically, as no one like 500Kb udev binaries o minor change to udev_vs_devfs document o added udev vs devfs supid document to the tree o move the signal handling registration to after we have initialized enough stuff o make ide-devfs.sh executable in the tree o udev.permissions.debian - forgot the dm nodes o update the udev.permissions.debian file with new entries o added udev.init script for the Linux From Scratch project Summary of changes from v010 to v011 ============================================ : o proper cleanup on udevdb_init() failure : o patch udev 009-010 rpm spec file : o fix udev sed Makefile usage Greg Kroah-Hartman: o add documentation about the BUS key being optional for the LABEL rule o add tests for LABEL rule with a device that has no bus o Don't require the BUS value for the LABEL rule o If a LABEL rule has a BUS id, then we must check to see if the device is on a bus o add documentation about the BUS key being optional for the CALLOUT rule o If a CALLOUT rule has a BUS id, then we must check to see if the device is on a bus o Don't require the BUS value for the CALLOUT rule o add test for callout rule with a device that has no bus o 010_bk stamp o added different build options to the rpm udev.spec file o add pci to the bus_files list o check for empty line a bit better in the parser o more init script cleanups, the stop target now calls udev to cleanup instead of just removing the whole /udev directory o make udev init script run udev in the background to let startup go much faster o fix long delay for all devices in namedev Summary of changes from v009 to v010 ============================================ : o change pgsize : o extras multipath update o extras multipath update o extras multipath update o extras multipath update Kay Sievers: o fix udev-test.pl o small cleanup udev-remove.c o experimental CALLOUT script for devfs ide node creation with cd, disc, part o add any valid device o introduce format char 'k' for kernel-name o trivial make fixes o don't overwrite old config on install o udev-remove.c cleanups o bug in udev-remove.c o trivial cleanup parser changes : o fix comment and whitespace handling in config files Adam Kropelin: o Allow build with empty EXTRAS Daniel E. F. Stekloff: o libsysfs 0.4.0 patch o fix scsi_id segfault with udev-009 o add libsysfs docs David T. Hollis: o mark config files as such in the rpm spec file Greg Kroah-Hartman: o fix complier warning in namedev.c o add documentation for the new '%k' modifier (kernel name replacement) o add documentation about the multiple sysfs values that are now allowed for the LABEL rule o add tests for multi-file LABEL rules o add ability to have up to 5 SYSFS_ file/value pairs for the LABEL rule o Just live with a sleep(1) in namedev for now until libsysfs is fixed up o try to wait until the proper device file shows up in sysfs o remove unneeded TODO and FIXME entry o clean up the stand-alone tests to work properly on other people's machines o add tests to catch whitespace and comment config file parsing errors Summary of changes from v008 to v009 ============================================ : o more extras/multipath changes o and more extras/multipath updates o more extras/multipath updates o yet more extras/multipath o more extras/multipath updates o extras/multipath update : o D-BUS patch for udev-008 : o add init.d/udev to "make install" o add init.d/udev to the spec file Kay Sievers: o don't rely on field order in namedev_parse o get part of callout return string o remove '\n' from end of callout return o man-page mention multiple symlinks o allow multiple symlinks o cleanup man & remove symlink comment o experimental (very simple) SYMLINK creation o man page beauty o pattern match for label method o a bug in linefeed removal : o remove udev from runlevels on uninstall o install initscript in udev rpm Daniel E. F. Stekloff: o pre-libsysfs-0.4.0 patch Greg Kroah-Hartman: o signal fixes due to klibc update o sync klibc with release 0.95 o add mol permissions to the debian permissions file o update the FAQ with info about bad modprobe events from the devfs scheme o some cleanups due to the need for LABEL rules to use "SYSFS_" now o Add restart target to the etc/init.d/udev script o tweak the config file generation portion of the Makefile a bit o change devfs disk name rule from 'disk' to 'disc' o add vc support to udev.rules.devfs o added a devfs udev config file from Marco d'Itri o set default mode to 0600 to be safer o Makefile tweaks for the DBUS build o update the FAQ due to the latest devfs mess on lkml and also due to symlinks now working o document the different Makefile config options that we have o change USE_DBUS to DBUS in Makefile, and disable it by default as it's still to hard to build on all systems o fix formatting of udev_dbus.c to use tabs. Also get it to build properly now o move all of the DBUS logic into one file and remove all of the #ifdef crud from the main code Olaf Hering: o dump latest klibc into the udev build tree o use udevdir in udev.conf Patrick Mansfield: o better allow builds of extras programs under udev o update udev extras/scsi_id to version 0.2 Summary of changes from v007 to v008 ============================================ : o more config file parsing robustness : o udev-007/extras/multipath update Arnd Bergmann: o Build failure - missing linux/limits.h include? o Add format modifier for devfs like naming o klibc makefile fixes Daniel E. F. Stekloff: o another patch for path problem o quick fix for libsysfs bus o libsysfs changes for sysfsutils 0.3.0 Greg Kroah-Hartman: o fix up some duplicated function compiler warnings in libsysfs o fix some compiler warnings in the tdb code o Added Kay's name to the man page o update the wildcard documentation in the man page to show the new styles supported o fix permission handling logic o enable default_mode ability to actually build o add support for the default_mode variable, as it is documented o show permissions and groups in the label_test o remove some items off of the TODO list, as they are now done o fix up the tests to work without all of the environ variables o get rid of the majority of the debug environment variables o Update the man page to show the new config file, it's format, and how to use it o fix up the tests to support the rules file name change o add support for a main udev config file, udev.conf o turn debugging messages off by default o split out the namedev config parsing logic to namedev_parse.c o rename namedev's get_attr() to be main namedev_name_device() as that's what it really is o add devfs like tty rules as an example in the default config file o operate on the rules in the order they are in the config file (within the rule type) instead of operating on them backwards. o Cset exclude: dsteklof@us.ibm.com|ChangeSet|20031126173159|56255 o add test for checking the BUS value o fix problem where we were not looking at the BUS value o add scsi and pci bus links in the test sysfs tree o add test and documentation for new %D devfs format modifier o changed the default location of the database to /udev/.udev.tdb to be LSB compliant o get rid of functions in klibc_fixups that are now in klibc o sync up with the 0.84 version of klibc o fix udev init.d script to handle all class devices in sysfs o fix the test.block and test.tty scripts due to their moveing. Also add a test.all script o 007_bk version change to Makefile Kay Sievers: o pattern matching for namedev o catch replace device by wildcard o udev.8 tweak numeric id text o udev-test.pl add subdir test o namedev.c strcat tweak o overall whitespace + debug text conditioning o udev-test.pl - tweaks Martin Hicks: o Add -nodefaultlibs while compiling against klibc Olaf Hering: o ARCH detection for ppc Patrick Mansfield: o fix udev parallel builds with klibc Summary of changes from v006 to v007 ============================================ : o fix segfault in parsing bad udev.permissions file Greg Kroah-Hartman: o update default config file with a CALLOUT rule, and more documentation o updated the man page with the latest format specifier changes o added ability to put format specifiers in the CALLOUT program string o tweak udev-test.pl to report '0' errors if that's what happened o only build klibc_fixups.c if we are actually using klibc o add support for string group and string user names in udev.permissions o add getgrnam and getpwnam to klibc_fixups files o remove Makefile.klibc o add udev-test perl script from Kay Sievers which blows away my puny shell scripts o added debian's version of udev.permissions o change to 006_bk version Kay Sievers: o format char for CALLOUT output o more namedev whitespace cleanups o support arguments in callout exec o namedev.c - change order of fields in CALLOUT o namedev.c whitespace + debug text cleanup o man page with udev.permissions wildcard Olaf Hering: o static klibc udev does not link against crt0.o Summary of changes from v005 to v006 ============================================ : o faster test scripts Arnd Bergmann: o more robust config file parsing in namedev.c o add bus id modifier Daniel E. F. Stekloff: o patch for libsysfs sysfs directory handling Greg Kroah-Hartman: o add another line to udev.permissions in the proper format o tweak replace_test o fix permissions to work properly now o add real udev.permissions file to test directory o fix namedev.c to build with older version of gcc o add dumb test for all of the different modifiers o update the TODO list with more items that people can easily do o move the test.block and test.tty scripts to the test/ directory o add remove actions to the test scripts o turn DEBUG_PARSER off by default o add some documentation for the %b modifier to the default config file o fix make install rule for when the udev symlink is already there o change release target in makefile o change debug level on printf values for now o updated demo config file o add some documentation of the modifiers to the default config file o add demo config file o updated bk ignore list for klibc generated files o add printf option to label test to verify it works o fix up printf-like functionality due to previous changes o get the major/minor number before we name the device o add scsi_id "extra" program from Patrick Mansfield o Add multipath "extra" program from Christophe Varoqui, o trailing whitespace cleanups o splig LABEL and NUMBER into separate functions o add TOPO regression test o move TOPOLOGY rule to it's own function o fix bug where NUMBER and TOPOLOGY would not work for partitions o clean up the way we find the sysdevice for a block device for namedev o updated label test script (tests for partitions now.) o split REPLACE and CALLOUT into separate functions o add debug line for REPLACE call o add replace test o add more sysfs test tree files o change UDEV_SYSFS_PATH environment variable due to libsysfs change o fix bug in klibc's isspace function o fix udev-add.c to build properly with older versions of gcc o add prototype for ftruncate to klibc o Remove a few items from the TODO list that are already done o version number to 005_bk o pull some klibc stuff into the make Makefile to try to stay in sync o klibc build fixes Kay Sievers: o apply permissions.conf support for wildcard and default name o man page with included placeholder list o implement printf-like placeholder support for NAME o more manpage tweaks o add support for subdirs o add uid/gid to nodes Olaf Hering: o DESTDIR for udev Paul Mundt: o Fixup path for kernel includes when building with klibc Robert Love: o udev init script Summary of changes from v004 to v005 ============================================ : o namedev.c comments + debug patch o man page update Greg Kroah-Hartman: o ignore the klibc/linux symlink o add klibc linux symlink info to the README o get 'make release' to work properly again o added README info for how to build using klibc o turn off debugging if we are building with klibc o turn off debugging in namedev o added vsyslog support to klibc o add ftruncate to klibc o klibc specific tweaks o libsysfs does not need mntent.h in it's header file o udev build tweaks to tdb's spinlock code o klibc makefile changes o build tdb and libsysfs from the same makefile as udev o udev-add build cleanups for other libc versions o tweak tdb to build within udev better o make libsysfs spit debug messages to the same place as the rest of udev o make libsysfs build cleanly o updated bk ignore list o added klibc version 0.82 (cvs tree) to the udev tree o makefile fix for now o Merge greg@bucket:/home/greg/src/udev into kroah.com:/home/greg/src/udev o hm, makefile bug with so many files... will fix later o regression tests starting to be added o fix LABEL bug for device files (not class files.) o more warning flags to the build o got rid of struct device_attr o rename namedev.permissions and namedev.config to udev.permissions and udev.config o fix dbg line in namedev.c o more overrides of config info with env variables if in test mode o Fix bug causing udev to sleep forever waiting for dev file to show up o change version to 004_bk o make config files, sysfs root, and udev root configurable from config variables Robert Love: o udev: sleep_for_dev() bits o udev: another canidate for static Summary of changes from v003 to v004 ============================================ Daniel E. F. Stekloff: o new version of libsysfs patch Greg Kroah-Hartman: o 004 release o major database cleanups o Changed test.block and test.tty to take ACTION from the command line o don't sleep if 'dev' file is already present on device add o fix comment about how the "dev" file is made up o more database work. Now we only store the info we really need right now o add BUS= bug to TODO list so it will not get forgotten o spec file changes o test.block changes o ok, rpm likes the "_" character instead of "-" better o change the version to 003-bk to keep things sane with people using the bk tree o got "remove of named devices" working o fix segfaults when dealing with partitions Kay Sievers: o man file update o man page update Robert Love: o udev: mode should be mode_t o udev: trivial trivialities o udev: cool test scripts again o udev spec file symlink support o udev: cool test scripts o udev spec file bits Summary of changes from v0.2 to v003 ============================================ Daniel E. F. Stekloff: o udevdb patch o udevdb prototype Greg Kroah-Hartman: o update the spec file for the new version and install process o fix makefile release rule to not drop tdb.h file o Add FAQ for udev o removed AUTHORS and INSTALL files as they were pretty pointless o copyright updates o Add AUTHORS and INSTALL files o TODO updates o Updatd the README o updated the TODO list o add udev man page (basically just a place holder for now.) o added uninstall support o added install target for makefile so people don't have to do it by hand anymore o add version to debug log on startup o tell the user what mknod() we are trying to do o add dbg_parse() to cut down on parse file debugging statements o put config files and database in /etc/udev by default o add ols 2003 udev paper to docs/ o clean up some debugging stuff in namedev.c o do not build the tdb binary programs, only the objects o merge tdb into the build process o Added tdb code from latest cvs version in the samba tree o added my name to the .spec file o minor cleanups o cleanup the mknod code a bit o remove mknod callout o handle new major:minor format of dev files that showed up in 2.6.0-test2-bk3 or so o oops, everything was getting created as 000 mode, try to fix this up, but fail... o more test stuff Olaf Hering: o print udev pid Patrick Mansfield: o add callout config type to udev Paul Mundt: o Fix TDB cross compilation o udev spec file o udev/libsysfs cross compile fixes Summary of changes from v0.1 to v0.2 ============================================ Greg Kroah-Hartman: o more test stuff o removed unneeded stuff from udev.h o added 0.2 change log info o start working on label support, and fix some segfaults for block devices o test config file changes o add NUMBER support (basically same logic as TOPOLOGY, perhaps we should merge this...) o added topology support o got REPLACE to work properly o make struct config_device contain a struct device_attr instead of duplicating the mess o block test o split the tests up into different files o split udev main logic into udev-add and udev-remove o Clean up the namedev interface a bit, making the code smaller o bk: update ignore list o update the tests to handle block devices too o add initial libsysfs support o added libsysfs to the build o added libsysfs code from sysutils-0.1.1-071803 release o namedev config files are fully parsed o more permission tests o make log_message spit out warnings so I don't have to spend forever chasing down stupid bugs that aren't there... o added klibc makefile o Initial namedev parsing of config files o sleep for 2 seconds to give the kernel a chance to actually create the files we need o pick a better default UDEV_ROOT o fix up the test to actually work o added more documentation in README and TODO files Summary of changes up to v0.1 ============================================ Greg Kroah-Hartman: o added more documentation in README and TODO files o updated the documentation o cleaned up the makefile a bit o remove now works! o restructure code to be able to actually get remove_node() to work o Creating nodes actually works o added stupid test script for debugging o added initial documentation and gpl license o enabled debugging o updated ignore list o added initial files o fixed up config o Initial repository create o BitKeeper file /home/greg/src/udev/udev/ChangeSet