/* * scsi_id.c * * Main section of the scsi_id program * * Copyright (C) IBM Corp. 2003 * Copyright (C) SUSE Linux Products GmbH, 2006 * * Author: * Patrick Mansfield * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation version 2 of the License. */ #include #include #include #include #include #include #include #include #include #include #include #include "../../udev.h" #include "scsi_id.h" #include "scsi_id_version.h" /* temporary names for mknod */ #define TMP_DIR "/dev" #define TMP_PREFIX "tmp-scsi" static const char short_options[] = "abd:f:ginp:s:uvVx"; static const char dev_short_options[] = "bgp:"; static int all_good; static int always_info; static int dev_specified; static int sys_specified; static char config_file[MAX_PATH_LEN] = SCSI_ID_CONFIG_FILE; static int display_bus_id; static enum page_code default_page_code; static int use_stderr; static int debug; static int hotplug_mode; static int reformat_serial; static int ignore_sysfs; static int export; static char vendor_str[64]; static char model_str[64]; static char revision_str[16]; static char type_str[16]; #ifdef USE_LOG void log_message(int priority, const char *format, ...) { va_list args; static int udev_log = -1; if (udev_log == -1) { const char *value; value = getenv("UDEV_LOG"); if (value) udev_log = log_priority(value); else udev_log = LOG_ERR; } if (priority > udev_log) return; va_start(args, format); vsyslog(priority, format, args); va_end(args); } #endif static void set_str(char *to, const char *from, size_t count) { size_t i, j, len; /* strip trailing whitespace */ len = strnlen(from, count); while (len && isspace(from[len-1])) len--; /* strip leading whitespace */ i = 0; while (isspace(from[i]) && (i < len)) i++; j = 0; while (i < len) { /* substitute multiple whitespace */ if (isspace(from[i])) { while (isspace(from[i])) i++; to[j++] = '_'; } /* skip chars */ if (from[i] == '/') { i++; continue; } to[j++] = from[i++]; } to[j] = '\0'; } static void set_type(char *to, const char *from, size_t len) { int type_num; char *eptr; char *type = "generic"; type_num = strtoul(from, &eptr, 0); if (eptr != from) { switch (type_num) { case 0: type = "disk"; break; case 1: type = "tape"; break; case 4: type = "optical"; break; case 5: type = "cd"; break; case 7: type = "optical"; break; case 0xe: type = "disk"; break; case 0xf: type = "optical"; break; default: break; } } strncpy(to, type, len); to[len-1] = '\0'; } static int create_tmp_dev(const char *devpath, char *tmpdev, int dev_type) { unsigned int maj, min; const char *attr; dbg("%s", devpath); attr = sysfs_attr_get_value(devpath, "dev"); if (attr == NULL) { dbg("%s: could not get dev attribute: %s", devpath, strerror(errno)); return -1; } dbg("dev value %s", attr); if (sscanf(attr, "%u:%u", &maj, &min) != 2) { err("%s: invalid dev major/minor", devpath); return -1; } snprintf(tmpdev, MAX_PATH_LEN, "%s/%s-maj%d-min%d-%u", TMP_DIR, TMP_PREFIX, maj, min, getpid()); dbg("tmpdev '%s'", tmpdev); if (mknod(tmpdev, 0600 | dev_type, makedev(maj, min))) { err("mknod failed: %s", strerror(errno)); return -1; } return 0; } /* * get_value: * * buf points to an '=' followed by a quoted string ("foo") or a string ending * with a space or ','. * * Return a pointer to the NUL terminated string, returns NULL if no * matches. */ static char *get_value(char **buffer) { static char *quote_string = "\"\n"; static char *comma_string = ",\n"; char *val; char *end; if (**buffer == '"') { /* * skip leading quote, terminate when quote seen */ (*buffer)++; end = quote_string; } else { end = comma_string; } val = strsep(buffer, end); if (val && end == quote_string) /* * skip trailing quote */ (*buffer)++; while (isspace(**buffer)) (*buffer)++; return val; } static int argc_count(char *opts) { int i = 0; while (*opts != '\0') if (*opts++ == ' ') i++; return i; } /* * get_file_options: * * If vendor == NULL, find a line in the config file with only "OPTIONS="; * if vendor and model are set find the first OPTIONS line in the config * file that matches. Set argc and argv to match the OPTIONS string. * * vendor and model can end in '\n'. */ static int get_file_options(const char *vendor, const char *model, int *argc, char ***newargv) { char *buffer; FILE *fd; char *buf; char *str1; char *vendor_in, *model_in, *options_in; /* read in from file */ int lineno; int c; int retval = 0; dbg("vendor='%s'; model='%s'\n", vendor, model); fd = fopen(config_file, "r"); if (fd == NULL) { dbg("can't open %s\n", config_file); if (errno == ENOENT) { return 1; } else { err("can't open %s: %s", config_file, strerror(errno)); return -1; } } /* * Allocate a buffer rather than put it on the stack so we can * keep it around to parse any options (any allocated newargv * points into this buffer for its strings). */ buffer = malloc(MAX_BUFFER_LEN); if (!buffer) { err("Can't allocate memory."); return -1; } *newargv = NULL; lineno = 0; while (1) { vendor_in = model_in = options_in = NULL; buf = fgets(buffer, MAX_BUFFER_LEN, fd); if (buf == NULL) break; lineno++; if (buf[strlen(buffer) - 1] != '\n') { info("Config file line %d too long.\n", lineno); break; } while (isspace(*buf)) buf++; /* blank or all whitespace line */ if (*buf == '\0') continue; /* comment line */ if (*buf == '#') continue; dbg("lineno %d: '%s'\n", lineno, buf); str1 = strsep(&buf, "="); if (str1 && strcasecmp(str1, "VENDOR") == 0) { str1 = get_value(&buf); if (!str1) { retval = -1; break; } vendor_in = str1; str1 = strsep(&buf, "="); if (str1 && strcasecmp(str1, "MODEL") == 0) { str1 = get_value(&buf); if (!str1) { retval = -1; break; } model_in = str1; str1 = strsep(&buf, "="); } } if (str1 && strcasecmp(str1, "OPTIONS") == 0) { str1 = get_value(&buf); if (!str1) { retval = -1; break; } options_in = str1; } dbg("config file line %d:" " vendor '%s'; model '%s'; options '%s'\n", lineno, vendor_in, model_in, options_in); /* * Only allow: [vendor=foo[,model=bar]]options=stuff */ if (!options_in || (!vendor_in && model_in)) { info("Error parsing config file line %d '%s'", lineno, buffer); retval = -1; break; } if (vendor == NULL) { if (vendor_in == NULL) { dbg("matched global option\n"); break; } } else if ((vendor_in && strncmp(vendor, vendor_in, strlen(vendor_in)) == 0) && (!model_in || (strncmp(model, model_in, strlen(model_in)) == 0))) { /* * Matched vendor and optionally model. * * Note: a short vendor_in or model_in can * give a partial match (that is FOO * matches FOOBAR). */ dbg("matched vendor/model\n"); break; } else { dbg("no match\n"); } } if (retval == 0) { if (vendor_in != NULL || model_in != NULL || options_in != NULL) { /* * Something matched. Allocate newargv, and store * values found in options_in. */ strcpy(buffer, options_in); c = argc_count(buffer) + 2; *newargv = calloc(c, sizeof(**newargv)); if (!*newargv) { err("Can't allocate memory."); retval = -1; } else { *argc = c; c = 0; /* * argv[0] at 0 is skipped by getopt, but * store the buffer address there for * later freeing */ (*newargv)[c] = buffer; for (c = 1; c < *argc; c++) (*newargv)[c] = strsep(&buffer, " \t"); } } else { /* No matches */ retval = 1; } } if (retval != 0) free(buffer); fclose(fd); return retval; } static int set_options(int argc, char **argv, const char *short_opts, char *target, char *maj_min_dev) { int option; /* * optind is a global extern used by getopt. Since we can call * set_options twice (once for command line, and once for config * file) we have to reset this back to 1. */ optind = 1; while (1) { option = getopt(argc, argv, short_opts); if (option == -1) break; if (optarg) dbg("option '%c' arg '%s'\n", option, optarg); else dbg("option '%c'\n", option); switch (option) { case 'a': always_info = 1; break; case 'b': all_good = 0; break; case 'd': dev_specified = 1; strncpy(maj_min_dev, optarg, MAX_PATH_LEN); maj_min_dev[MAX_PATH_LEN-1] = '\0'; break; case 'e': use_stderr = 1; break; case 'f': strncpy(config_file, optarg, MAX_PATH_LEN); config_file[MAX_PATH_LEN-1] = '\0'; break; case 'g': all_good = 1; break; case 'i': display_bus_id = 1; break; case 'p': if (strcmp(optarg, "0x80") == 0) { default_page_code = PAGE_80; } else if (strcmp(optarg, "0x83") == 0) { default_page_code = PAGE_83; } else if (strcmp(optarg, "pre-spc3-83") == 0) { default_page_code = PAGE_83_PRE_SPC3; } else { info("Unknown page code '%s'", optarg); return -1; } break; case 'n': ignore_sysfs = 1; break; case 's': sys_specified = 1; strncpy(target, optarg, MAX_PATH_LEN); target[MAX_PATH_LEN-1] = '\0'; break; case 'u': reformat_serial = 1; break; case 'x': export = 1; break; case 'v': debug++; break; case 'V': info("scsi_id version: %s\n", SCSI_ID_VERSION); exit(0); break; default: info("Unknown or bad option '%c' (0x%x)", option, option); return -1; } } return 0; } static int per_dev_options(struct sysfs_device *dev_scsi, int *good_bad, int *page_code) { int retval; int newargc; char **newargv = NULL; int option; *good_bad = all_good; *page_code = default_page_code; retval = get_file_options(vendor_str, model_str, &newargc, &newargv); optind = 1; /* reset this global extern */ while (retval == 0) { option = getopt(newargc, newargv, dev_short_options); if (option == -1) break; if (optarg) dbg("option '%c' arg '%s'\n", option, optarg); else dbg("option '%c'\n", option); switch (option) { case 'b': *good_bad = 0; break; case 'g': *good_bad = 1; break; case 'p': if (strcmp(optarg, "0x80") == 0) { *page_code = PAGE_80; } else if (strcmp(optarg, "0x83") == 0) { *page_code = PAGE_83; } else if (strcmp(optarg, "pre-spc3-83") == 0) { *page_code = PAGE_83_PRE_SPC3; } else { info("Unknown page code '%s'", optarg); retval = -1; } break; default: info("Unknown or bad option '%c' (0x%x)", option, option); retval = -1; break; } } if (newargv) { free(newargv[0]); free(newargv); } return retval; } static int set_sysfs_values(struct sysfs_device *dev_scsi) { const char *vendor, *model, *type; vendor = sysfs_attr_get_value(dev_scsi->devpath, "vendor"); if (!vendor) { info("%s: cannot get vendor attribute", dev_scsi->devpath); return -1; } set_str(vendor_str, vendor, sizeof(vendor_str)-1); model = sysfs_attr_get_value(dev_scsi->devpath, "model"); if (!model) { info("%s: cannot get model attribute\n", dev_scsi->devpath); return -1; } set_str(model_str, model, sizeof(model_str)-1); type = sysfs_attr_get_value(dev_scsi->devpath, "type"); if (!type) { info("%s: cannot get type attribute", dev_scsi->devpath); return -1; } set_type(type_str, type, sizeof(type_str)); type = sysfs_attr_get_value(dev_scsi->devpath, "rev"); if (!type) { info("%s: cannot get type attribute\n", dev_scsi->devpath); return -1; } set_str(revision_str, type, sizeof(revision_str)-1); return 0; } static int set_inq_values(struct sysfs_device *dev_scsi, const char *path) { int retval; char vendor[8], model[16], type[4], rev[4]; retval = scsi_std_inquiry(dev_scsi, path, vendor, model, rev, type); if (retval) return retval; set_str(vendor_str, vendor, 8); set_str(model_str, model, 16); set_type(type_str, type, sizeof(type_str) - 1); set_str(revision_str, rev, sizeof(revision_str) -1); return 0; } /* * format_serial: replace to whitespaces by underscores for calling * programs that use the serial for device naming (multipath, Suse * naming, etc...) */ static void format_serial(char *serial) { char *p = serial, *q; q = p; while (*p != '\0') { if (isspace(*p)) { if (q > serial && q[-1] != '_') { *q = '_'; q++; } } else { *q = *p; q++; } p++; } *q = '\0'; } /* * scsi_id: try to get an id, if one is found, printf it to stdout. * returns a value passed to exit() - 0 if printed an id, else 1. This * could be expanded, for example, if we want to report a failure like no * memory etc. return 2, and return 1 for expected cases (like broken * device found) that do not print an id. */ static int scsi_id(const char *devpath, char *maj_min_dev) { int retval; int dev_type = 0; struct sysfs_device *dev; struct sysfs_device *dev_scsi = NULL; int good_dev; int page_code; char serial[MAX_SERIAL_LEN]; char serial_short[MAX_SERIAL_LEN]; char bus_str[8]; dbg("devpath %s\n", devpath); dev = sysfs_device_get(devpath); if (dev == NULL) { err("unable to access '%s'", devpath); return 1; } if (strcmp(dev->subsystem, "block") == 0) dev_type = S_IFBLK; else dev_type = S_IFCHR; if (!ignore_sysfs) { /* get scsi parent device */ dev_scsi = sysfs_device_get_parent_with_subsystem(dev, "scsi"); if (dev_scsi == NULL) { err("unable to access parent device of '%s'", devpath); return 1; } } /* mknod a temp dev to communicate with the device */ if (!dev_specified && create_tmp_dev(dev->devpath, maj_min_dev, dev_type)) { dbg("create_tmp_dev failed\n"); return 1; } if (!ignore_sysfs) { set_sysfs_values(dev_scsi); strcpy(bus_str,"scsi"); } else { dev_scsi = dev; set_inq_values(dev_scsi, maj_min_dev); strcpy(bus_str,"cciss"); } /* get per device (vendor + model) options from the config file */ retval = per_dev_options(dev_scsi, &good_dev, &page_code); dbg("per dev options: good %d; page code 0x%x", good_dev, page_code); if (!good_dev) { retval = 1; } else if (scsi_get_serial(dev_scsi, maj_min_dev, page_code, serial, serial_short, MAX_SERIAL_LEN)) { retval = always_info?0:1; } else { retval = 0; } if (!retval) { if (export) { char serial_str[MAX_SERIAL_LEN]; printf("ID_VENDOR=%s\n", vendor_str); printf("ID_MODEL=%s\n", model_str); printf("ID_REVISION=%s\n", revision_str); set_str(serial_str, serial, sizeof(serial_str)); printf("ID_SERIAL=%s\n", serial_str); set_str(serial_str, serial_short, sizeof(serial_str)); printf("ID_SERIAL_SHORT=%s\n", serial_str); printf("ID_TYPE=%s\n", type_str); printf("ID_BUS=%s\n", bus_str); } else { if (reformat_serial) format_serial(serial); if (display_bus_id) printf("%s: ", dev_scsi->kernel); printf("%s\n", serial); } dbg("%s\n", serial); retval = 0; } if (!dev_specified) unlink(maj_min_dev); return retval; } int main(int argc, char **argv) { int retval = 0; char devpath[MAX_PATH_LEN]; char maj_min_dev[MAX_PATH_LEN]; int newargc; const char *env; char **newargv; logging_init("scsi_id"); sysfs_init(); dbg("argc is %d\n", argc); /* sysfs path can be overridden for testing */ env = getenv("SYSFS_PATH"); if (env) { strncpy(sysfs_path, env, sizeof(sysfs_path)); sysfs_path[sizeof(sysfs_path)-1] = '\0'; } else strcpy(sysfs_path, "/sys"); env = getenv("DEVPATH"); if (env) { hotplug_mode = 1; sys_specified = 1; strncpy(devpath, env, MAX_PATH_LEN); devpath[sizeof(devpath)-1] = '\0'; } /* * Get config file options. */ newargv = NULL; retval = get_file_options(NULL, NULL, &newargc, &newargv); if (retval < 0) { retval = 1; goto exit; } if (newargv && (retval == 0)) { if (set_options(newargc, newargv, short_options, devpath, maj_min_dev) < 0) { retval = 2; goto exit; } free(newargv); } /* * Get command line options (overriding any config file or DEVPATH * settings). */ if (set_options(argc, argv, short_options, devpath, maj_min_dev) < 0) exit(1); if (!sys_specified) { info("-s must be specified\n"); retval = 1; goto exit; } retval = scsi_id(devpath, maj_min_dev); exit: sysfs_cleanup(); logging_close(); return retval; }