<?xml version="1.0"?>
<!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!--
  This file is part of systemd.

  Copyright 2012 Lennart Poettering

  systemd is free software; you can redistribute it and/or modify it
  under the terms of the GNU Lesser General Public License as published by
  the Free Software Foundation; either version 2.1 of the License, or
  (at your option) any later version.

  systemd is distributed in the hope that it will be useful, but
  WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public License
  along with systemd; If not, see <http://www.gnu.org/licenses/>.

  This is based on crypttab(5) from Fedora's initscripts package, which in
  turn is based on Debian's version.

  The Red Hat version has been written by Miloslav Trmac <mitr@redhat.com>.

-->
<refentry id="crypttab">

        <refentryinfo>
                <title>crypttab</title>
                <productname>systemd</productname>

                <authorgroup>
                        <author>
                                <contrib>Documentation</contrib>
                                <firstname>Miloslav</firstname>
                                <surname>Trmac</surname>
                                <email>mitr@redhat.com</email>
                        </author>
                        <author>
                                <contrib>Documentation</contrib>
                                <firstname>Lennart</firstname>
                                <surname>Poettering</surname>
                                <email>lennart@poettering.net</email>
                        </author>
                </authorgroup>
        </refentryinfo>

        <refmeta>
                <refentrytitle>crypttab</refentrytitle>
                <manvolnum>5</manvolnum>
        </refmeta>

        <refnamediv>
                <refname>crypttab</refname>
                <refpurpose>Configuration for encrypted block devices</refpurpose>
        </refnamediv>

        <refsynopsisdiv>
                <para><filename>/etc/crypttab</filename></para>
        </refsynopsisdiv>

        <refsect1>
                <title>Description</title>

                <para>The <filename>/etc/crypttab</filename> file
                describes encrypted block devices that are set up
                during system boot.</para>

                <para>Empty lines and lines starting with the #
                character are ignored.  Each of the remaining lines
                describes one encrypted block device, fields on the
                line are delimited by white space.  The first two
                fields are mandatory, the remaining two are
                optional.</para>

                <para>The first field contains the name of the
                resulting encrypted block device; the device is set up
                within <filename>/dev/mapper/</filename>.</para>

                <para>The second field contains a path to the
                underlying block device, or a specification of a block
                device via <literal>UUID=</literal> followed by the
                UUID.  If the block device contains a LUKS signature,
                it is opened as a LUKS encrypted partition; otherwise
                it is assumed to be a raw dm-crypt partition.</para>

                <para>The third field specifies the encryption
                password.  If the field is not present or the password
                is set to none, the password has to be manually
                entered during system boot.  Otherwise the field is
                interpreted as a path to a file containing the
                encryption password.  For swap encryption
                <filename>/dev/urandom</filename> or the hardware
                device <filename>/dev/hw_random</filename> can be used
                as the password file; using
                <filename>/dev/random</filename> may prevent boot
                completion if the system does not have enough entropy
                to generate a truly random encryption key.</para>

                <para>The fourth field, if present, is a
                comma-delimited list of options.  The following
                options are recognized:</para>

                <variablelist>
                        <varlistentry>
                                <term><varname>cipher=</varname></term>

                                <listitem><para>Specifies the cipher
                                to use; see
                                <citerefentry><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry>
                                for possible values and the default
                                value of this option.  A cipher with
                                unpredictable IV values, such as
                                <literal>aes-cbc-essiv:sha256</literal>,
                                is recommended. </para></listitem>
                        </varlistentry>


                        <varlistentry>
                                <term><varname>size=</varname></term>

                                <listitem><para>Specifies the key size
                                in bits; see
                                <citerefentry><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry>
                                for possible values and the default
                                value of this
                                option. </para></listitem>
                        </varlistentry>


                        <varlistentry>
                                <term><varname>keyfile-size=</varname></term>

                                <listitem><para>Specifies the maximum number
                                of bytes to read from the keyfile; see
                                <citerefentry><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry>
                                for possible values and the default
                                value of this option. This option is ignored
                                in plain encryption mode, as the keyfile-size is then given by the key size.</para></listitem>
                        </varlistentry>


                        <varlistentry>
                                <term><varname>keyfile-offset=</varname></term>

                                <listitem><para>Specifies the number
                                of bytes to skip at the start of
                                the keyfile; see
                                <citerefentry><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry>
                                for possible values and the default
                                value of this option.</para></listitem>
                        </varlistentry>


                        <varlistentry>
                                <term><varname>hash=</varname></term>

                                <listitem><para>Specifies the hash to
                                use for password hashing; see
                                <citerefentry><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> for possible values and
                                the default value of this
                                option. </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>tries=</varname></term>

                                <listitem><para>Specifies the maximum
                                number of times the user is queried
                                for a password.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>verify</varname></term>

                                <listitem><para> If the encryption
                                password is read from console, it has
                                to be entered twice (to prevent
                                typos). </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>read-only</varname></term>

                                <listitem><para>Set up the encrypted
                                block device in read-only
                                mode.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>allow-discards</varname></term>

                                <listitem><para>Allow discard requests
                                to be passed through the encrypted
                                block device. This improves
                                performance on SSD storage but has
                                security
                                implications.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>luks</varname></term>

                                <listitem><para>Force LUKS mode.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>plain</varname></term>

                                <listitem><para>Force plain encryption
                                mode.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>timeout=</varname></term>

                                <listitem><para>Specify the timeout
                                for querying for a password. If no
                                unit is specified seconds is used.
                                Supported units are s, ms,
                                us, min, h, d.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>noauto</varname></term>

                                <listitem><para> This device will not
                                be automatically unlocked on
                                boot. </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>nofail</varname></term>

                                <listitem><para>The system will not
                                wait for the device to show up and be
                                unlocked at boot, and not fail the
                                boot if it doesn't show
                                up.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>swap</varname></term>

                                <listitem><para> The encrypted block
                                device will be used as a swap
                                partition, and will be formatted as a
                                swap partition after setting up the
                                encrypted block device, with
                                <citerefentry><refentrytitle>mkswap</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>

                                <para>WARNING: Using the
                                <varname>swap</varname> option will
                                destroy the contents of the named
                                partition during every boot, so make
                                sure the underlying block device is
                                specified
                                correctly. </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>tmp</varname></term>

                                <listitem><para>The encrypted block
                                device will be prepared for using it
                                as <filename>/tmp</filename>
                                partition: it will be formatted using
                                <citerefentry><refentrytitle>mke2fs</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>

                                <para>WARNING: Using the
                                <varname>tmp</varname> option will
                                destroy the contents of the named
                                partition during every boot, so make
                                sure the underlying block device is
                                specified
                                correctly. </para></listitem>
                        </varlistentry>
                </variablelist>

                <para>At early boot and when the system manager
                configuration is reloaded this file is translated into
                native systemd units
                by <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>
        </refsect1>

        <refsect1>
                <title>Example</title>
                <example>
                        <title>/etc/crypttab example</title>
                        <para>Set up two encrypted block devices with
                        LUKS: one normal one for storage, and another
                        one for usage as swap device.</para>

                        <programlisting>luks-2505567a-9e27-4efe-a4d5-15ad146c258b UUID=2505567a-9e27-4efe-a4d5-15ad146c258b - timeout=0
swap /dev/sda7 /dev/urandom swap</programlisting>
                </example>
        </refsect1>

        <refsect1>
                <title>See Also</title>
                <para>
                        <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>systemd-cryptsetup@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>mkswap</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>mke2fs</refentrytitle><manvolnum>8</manvolnum></citerefentry>
                </para>
        </refsect1>

</refentry>