<?xml version='1.0'?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
        "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">

<!--
  This file is part of systemd.

  Copyright 2010 Lennart Poettering

  systemd is free software; you can redistribute it and/or modify it
  under the terms of the GNU General Public License as published by
  the Free Software Foundation; either version 2 of the License, or
  (at your option) any later version.

  systemd is distributed in the hope that it will be useful, but
  WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->

<refentry id="daemon">

        <refentryinfo>
                <title>daemon</title>
                <productname>systemd</productname>

                <authorgroup>
                        <author>
                                <contrib>Developer</contrib>
                                <firstname>Lennart</firstname>
                                <surname>Poettering</surname>
                                <email>lennart@poettering.net</email>
                        </author>
                </authorgroup>
        </refentryinfo>

        <refmeta>
                <refentrytitle>daemon</refentrytitle>
                <manvolnum>7</manvolnum>
        </refmeta>

        <refnamediv>
                <refname>daemon</refname>
                <refpurpose>Writing and Packaging System Daemons</refpurpose>
        </refnamediv>

        <refsect1>
                <title>Description</title>

                <para>A daemon is a service process that runs in the
                background and supervises the system or provides
                functionality to other processes. Traditionally,
                daemons are implemented following a scheme originating
                in SysV Unix. Modern daemons should follow a simpler
                yet more powerful scheme (here called "new-style"
                daemons), as implemented by
                <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>. This
                manual page covers both schemes, and in
                particular includes recommendations for daemons that
                shall be included in the systemd init system.</para>

                <refsect2>
                        <title>SysV Daemons</title>

                        <para>When a traditional SysV daemon
                        starts, it should execute the following steps
                        as part of the initialization. Note that these
                        steps are unnecessary for new-style daemons (see below),
                        and should only be implemented if compatibility
                        with SysV is essential.</para>

                        <orderedlist>
                                <listitem><para>Close all open file
                                descriptors except STDIN, STDOUT,
                                STDERR (i.e. the first three file
                                descriptors 0, 1, 2). This ensures
                                that no accidentally passed file
                                descriptor stays around in the daemon
                                process. On Linux this is best
                                implemented by iterating through
                                <filename>/proc/self/fd</filename>,
                                with a fallback of iterating from file
                                descriptor 3 to the value returned by
                                <function>getrlimit()</function> for
                                RLIMIT_NOFILE.</para></listitem>

                                <listitem><para>Reset all signal
                                handlers to their default. This is
                                best done by iterating through the
                                available signals up to the limit of
                                _NSIG and resetting them to
                                SIG_DFL.</para></listitem>

                                <listitem><para>Reset the signal mask
                                using
                                <function>sigprocmask()</function>.</para></listitem>

                                <listitem><para>Sanitize the
                                environment block, removing or
                                resetting environment variables that
                                might negatively impact daemon
                                runtime.</para></listitem>

                                <listitem><para>Call <function>fork()</function>,
                                to create a background
                                process.</para></listitem>

                                <listitem><para>In the child, call
                                <function>setsid()</function> to
                                detach from any terminal and create an
                                independent session.</para></listitem>

                                <listitem><para>In the child, call
                                <function>fork()</function> again, to
                                ensure the daemon can never re-aquire
                                a terminal again.</para></listitem>

                                <listitem><para>Call <function>exit()</function> in the
                                first child, so that only the second
                                child (the actual daemon process)
                                stays around. This ensures that the
                                daemon process is reparented to
                                init/PID 1, as all daemons should
                                be.</para></listitem>

                                <listitem><para>In the daemon process,
                                connect <filename>/dev/null</filename>
                                to STDIN, STDOUT,
                                STDERR.</para></listitem>

                                <listitem><para>In the daemon process,
                                reset the umask to 0, so that the file
                                modes passed to <function>open()</function>, <function>mkdir()</function> and
                                suchlike directly control the access
                                mode of the created files and
                                directories.</para></listitem>

                                <listitem><para>In the daemon process,
                                change the current directory to the
                                root directory (/), in order to avoid
                                that the daemon involuntarily
                                blocks mount points from being
                                unmounted.</para></listitem>

                                <listitem><para>In the daemon process,
                                write the daemon PID (as returned by
                                <function>getpid()</function>) to a
                                PID file, for example
                                <filename>/var/run/foobar.pid</filename>
                                (for a hypothetical daemon "foobar"),
                                to ensure that the daemon cannot be
                                started more than once. This must be
                                implemented in race-free fashion so
                                that the PID file is only updated when
                                at the same time it is verified that
                                the PID previously stored in the PID
                                file no longer exists or belongs to a
                                foreign process. Commonly some kind of
                                file locking is employed to implement
                                this logic.</para></listitem>

                                <listitem><para>In the daemon process,
                                drop privileges, if possible and
                                applicable.</para></listitem>

                                <listitem><para>From the daemon
                                process notify the original process
                                started that initialization is
                                complete. This can be implemented via
                                an unnamed pipe or similar
                                communication channel that is created
                                before the first
                                <function>fork()</function> and hence
                                available in both the original and the
                                daemon process.</para></listitem>

                                <listitem><para>Call
                                <function>exit()</function> in the
                                original process. The process that
                                invoked the daemon must be able to
                                rely that this
                                <function>exit()</function> happens
                                after initialization is complete and
                                all external communication channels
                                established and
                                accessible.</para></listitem>
                        </orderedlist>

                        <para>The BSD <function>daemon()</function> function should not be
                        used, as it implements only a subset of these steps.</para>

                        <para>A daemon that needs to provide
                        compatibility with SysV systems should
                        implement the scheme pointed out
                        above. However, it is recommended to make this
                        behaviour optional and configurable via a
                        command line argument, to ease debugging as
                        well as to simplify integration into systems
                        using systemd.</para>
                </refsect2>

                <refsect2>
                        <title>New-Style Daemons</title>

                        <para>Modern services for Linux should be
                        implemented as new-style daemons. This makes it
                        easier to supervise and control them at
                        runtime and simplifies their
                        implementation.</para>

                        <para>For developing a new-style daemon none
                        of the initialization steps recommended for
                        SysV daemons need to be implemented. New-style
                        init systems such as systemd make all of them
                        redundant. Moreover, since some of these steps
                        interfere with process monitoring, file
                        descriptor passing and other functionality of
                        the init system it is recommended not to
                        execute them when run as new-style
                        service.</para>

                        <para>Note that new-style init systems
                        guarantee execution of daemon processes in
                        clean process contexts: it is guaranteed that
                        the environment block is sanitized, that the
                        signal handlers and mask is reset and that no
                        left-over file descriptors are passed. Daemons
                        will be executed in their own session, and
                        STDIN/STDOUT/STDERR connected to
                        <filename>/dev/null</filename> unless
                        otherwise configured. The umask is reset.</para>

                        <para>It is recommended for new-style daemons
                        to implement the following:</para>

                        <orderedlist>
                                <listitem><para>If SIGTERM is
                                received, shut down the daemon and
                                exit cleanly.</para></listitem>

                                <listitem><para>If SIGHUP is received,
                                reload the configuration files, if
                                this applies.</para></listitem>

                                <listitem><para>Provide a correct exit
                                code from the main daemon process, as
                                this is used by the init system to
                                detect service errors and problems. It
                                is recommended to follow the exit code
                                scheme as defined in the <ulink
                                url="http://refspecs.freestandards.org/LSB_3.1.1/LSB-Core-generic/LSB-Core-generic/iniscrptact.html">LSB
                                recommendations for SysV init
                                scripts</ulink>.</para></listitem>

                                <listitem><para>If possible and
                                applicable expose the daemon's control
                                interface via the D-Bus IPC system and
                                grab a bus name as last step of
                                initialization.</para></listitem>

                                <listitem><para>For integration in
                                systemd, provide a
                                <filename>.service</filename> unit
                                file that carries information about
                                starting, stopping and otherwise
                                maintaining the daemon. See
                                <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                                for details.</para></listitem>

                                <listitem><para>As much as possible,
                                rely on the init systemd's
                                functionality to limit the access of
                                the daemon to files, services and
                                other resources. i.e. in the case of
                                systemd, rely on systemd's resource
                                limit control instead of implementing
                                your own, rely on systemd's privilege
                                dropping code instead of implementing
                                it in the daemon, and similar. See
                                <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                                for the available
                                controls.</para></listitem>

                                <listitem><para>If D-Bus is used, make
                                your daemon bus-activatable, via
                                supplying a D-Bus service activation
                                configuration file. This has multiple
                                advantages: your daemon may be started
                                lazily on-demand; it may be started in
                                parallel to other daemons requiring it
                                -- which maximizes parallelization and
                                boot-up speed; your daemon can be
                                restarted on failure, without losing
                                any bus requests, as the bus queues
                                requests for activatable services. See
                                below for details.</para></listitem>

                                <listitem><para>If your daemon
                                provides services to other local
                                processes or remote clients via a
                                socket, it should be made
                                socket-activatable following the
                                scheme pointed out below. Like D-Bus
                                activation this enables on-demand
                                starting of services as well as it
                                allows improved parallelization of
                                service start-up. Also, for state-less
                                protocols (such as syslog, DNS) a
                                daemon implementing socket-based
                                activation can be restarted without
                                losing a single request. See below for
                                details.</para></listitem>

                                <listitem><para>If applicable a daemon
                                should notify the init system about
                                startup completion or status updates
                                via the
                                <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>
                                interface.</para></listitem>

                                <listitem><para>Instead of using the
                                <function>syslog()</function> call to log directly to the
                                system logger, a new-style daemon may
                                choose to simply log to STDERR via
                                <function>fprintf()</function>, which is then forwarded to
                                syslog by the init system. If log
                                priorities are necessary these can be
                                encoded by prefixing individual log
                                lines with strings like "&lt;4&gt;"
                                (for log priority 4 "WARNING" in the
                                syslog priority scheme), following a
                                similar style as the Linux kernel's
                                <function>printk()</function> priority system. In fact,
                                using this style of logging also
                                enables the init system to optionally
                                direct all application logging to the
                                kernel log buffer (kmsg), as
                                accessible via
                                <citerefentry><refentrytitle>dmesg</refentrytitle><manvolnum>1</manvolnum></citerefentry>. This
                                kind of logging may be enabled by
                                setting
                                <varname>StandardError=syslog</varname>
                                in the service unit file. For details
                                see
                                <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>
                                and
                                <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem>

                        </orderedlist>

                        <para>These recommendations are similar but
                        not identical to the <ulink
                        url="http://developer.apple.com/mac/library/documentation/MacOSX/Conceptual/BPSystemStartup/Articles/LaunchOnDemandDaemons.html#//apple_ref/doc/uid/TP40001762-104738">Apple
                        MacOS X Daemon Requirements</ulink>.</para>
                </refsect2>

        </refsect1>
        <refsect1>
                <title>Activation</title>

                <para>New-style init systems provide multiple
                additional mechanisms to activate services, as
                detailed below. It is common that services are
                configured to be activated via more than one mechanism
                at the same time. An example for systemd:
                <filename>bluetoothd.service</filename> might get
                activated either when Bluetooth hardware is plugged
                in, or when an application accesses its programming
                interfaces via D-Bus. Or, a print server daemon might
                get activated when traffic arrives at an IPP port, or
                when a printer is plugged in, or when a file is queued
                in the printer spool directory. Even for services that
                are intended to be started on system bootup
                unconditionally it is a good idea to implement some of
                the various activation schemes outlined below, in
                order to maximize parallelization: if a daemon
                implements a D-Bus service or listening socket,
                implementing the full bus and socket activation scheme
                allows starting of the daemon with its clients in
                parallel (which speeds up boot-up), since all its
                communication channels are established already, and no
                request is lost because client requests will be queued
                by the bus system (in case of D-Bus) or the kernel (in
                case of sockets), until the activation is
                completed.</para>

                <refsect2>
                        <title>Activation on Boot</title>

                        <para>Old-style daemons are usually activated
                        exclusively on boot (and manually by the
                        administrator) via SysV init scripts, as
                        detailed in the <ulink
                        url="http://refspecs.freestandards.org/LSB_3.1.1/LSB-Core-generic/LSB-Core-generic/iniscrptact.html">LSB
                        Linux Standard Base Core
                        Specification</ulink>. This method of
                        activation is supported ubiquitiously on Linux
                        init systems, both old-style and new-style
                        systems. Among other issues SysV init scripts
                        have the disadvantage of involving shell
                        scripts in the boot process. New-style init
                        systems generally employ updated versions of
                        activation, both during boot-up and during
                        runtime and using more minimal service
                        description files.</para>

                        <para>In systemd, if the developer or
                        administrator wants to make sure a service or
                        other unit is activated automatically on boot
                        it is recommended to place a symlink to the
                        unit file in the <filename>.wants/</filename>
                        directory of either
                        <filename>multi-user.target</filename> or
                        <filename>graphical.target</filename>, which
                        are normally used as boot targets at system
                        startup. See
                        <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                        for details about the
                        <filename>.wants/</filename> directories, and
                        <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>
                        for details about the two boot targets.</para>

                </refsect2>

                <refsect2>
                        <title>Socket-Based Activation</title>

                        <para>In order to maximize the possible
                        parallelization and robustness and simplify
                        configuration and development, it is
                        recommended for all new-style daemons that
                        communicate via listening sockets to employ
                        socket-based activation. In a socket-based
                        activation scheme the creation and binding of
                        the listening socket as primary communication
                        channel of daemons to local (and sometimes
                        remote) clients is moved out of the daemon
                        code and into the init system. Based on
                        per-daemon configuration the init system
                        installs the sockets and then hands them off
                        to the spawned process as soon as the
                        respective daemon is to be started.
                        Optionally activation of the service can be
                        delayed until the first inbound traffic
                        arrives at the socket, to implement on-demand
                        activation of daemons. However, the primary
                        advantage of this scheme is that all providers
                        and all consumers of the sockets can be
                        started in parallel as soon als all sockets
                        are established. In addition to that daemons
                        can be restarted with losing only a minimal
                        number of client transactions or even any
                        client request at all (the latter is
                        particularly true for state-less protocols,
                        such as DNS or syslog), because the socket
                        stays bound and accessible during the restart,
                        and all requests are queued while the daemon
                        cannot process them.</para>

                        <para>New-style daemons which support socket
                        activation must be able to receive their
                        sockets from the init system, instead of of
                        creating and binding them themselves. For
                        details about the programming interfaces for
                        this scheme provided by systemd see
                        <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>
                        and
                        <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>. For
                        details about porting existing daemons to
                        socket-based activation see below. With
                        minimal effort it is possible to implement
                        socket-based activation in addition to
                        traditional internal socket creation in the
                        same codebase in order to support both
                        new-style and old-style init systems from the
                        same daemon binary.</para>

                        <para>systemd implements socket-based
                        activation via <filename>.socket</filename>
                        units, which are described in
                        <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>. When
                        configuring socket units for socket-based
                        activation it is essential that all listening
                        sockets are pulled in by the special target
                        unit <filename>sockets.target</filename>. It
                        is recommended to place a
                        <varname>WantedBy=sockets.target</varname>
                        directive in the <literal>[Install]</literal>
                        section, to automatically add such a
                        dependency on installation of a socket
                        unit. Unless
                        <varname>DefaultDependencies=no</varname> is
                        set the necessary ordering dependencies are
                        implicitly created for all socket units. For
                        more information about
                        <filename>sockets.target</filename> see
                        <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>. It
                        is not necessary or recommended to place any
                        additional dependencies on socket units (for
                        example from
                        <filename>multi-user.target</filename> or
                        suchlike) when one is installed in
                        <filename>sockets.target</filename>.</para>
                </refsect2>

                <refsect2>
                        <title>Bus-Based Activation</title>

                        <para>When the D-Bus IPC system is used for
                        communication with clients, new-style daemons
                        should employ bus activation so that they are
                        automatically activated when a client
                        application accesses their IPC
                        interfaces. This is configured in D-Bus
                        service files (not to be confused with systemd
                        service unit files!). To ensure that D-Bus
                        uses systemd to start-up and maintain the
                        daemon use the
                        <varname>SystemdService=</varname> directive
                        in these service files, to configure the
                        matching systemd service for a D-Bus
                        service. e.g.: for a D-Bus service whose D-Bus
                        activation file is named
                        <filename>org.freedesktop.RealtimeKit.service</filename>,
                        make sure to set
                        <varname>SystemdService=rtkit-daemon.service</varname>
                        in that file, to bind it to the systemd
                        service
                        <filename>rtkit-daemon.service</filename>. This
                        is needed to make sure that the daemon is
                        started in a race-free fashion when activated
                        via multiple mechanisms simultaneously.</para>
                </refsect2>

                <refsect2>
                        <title>Device-Based Activation</title>

                        <para>Often, daemons that manage a particular
                        type of hardware should be activated only when
                        the hardware of the respective kind is plugged
                        in or otherwise becomes available. In a
                        new-style init system it is possible to bind
                        activation to hardware plug/unplug events. In systemd,
                        kernel devices appearing in the sysfs/udev
                        device tree can be exposed as units if they
                        are tagged with the string
                        "<literal>systemd</literal>". Like any other
                        kind of unit they may then pull in other units
                        when activated (i.e. Plugged in) and thus
                        implement device-based activation. Systemd
                        dependencies may be encoded in the udev
                        database via the
                        <varname>SYSTEMD_WANTS=</varname>
                        property. See
                        <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                        for details. Often it is nicer to pull in
                        services from devices only indirectly via
                        dedicated targets. Example: instead of pulling
                        in <filename>bluetoothd.service</filename>
                        from all the various bluetooth dongles and
                        other hardware available, pull in
                        bluetooth.target from them and
                        <filename>bluetoothd.service</filename> from
                        that target. This provides for nicer
                        abstraction and gives administrators the
                        option to enable
                        <filename>bluetoothd.service</filename> via
                        controlling a
                        <filename>bluetooth.target.wants/</filename>
                        symlink uniformly with a tool like
                        <citerefentry><refentrytitle>systemd-install</refentrytitle><manvolnum>1</manvolnum></citerefentry>
                        instead of manipulating the udev
                        ruleset.</para>
                </refsect2>

                <refsect2>
                        <title>Path-Based Activation</title>

                        <para>Often, runtime of daemons processing
                        spool files or directories (such as a printing
                        system) can be delayed until these file system
                        objects change state, or become
                        non-empty. New-style init systems provide a
                        way to bind service activation to file system
                        changes. systemd implements this scheme via
                        path-based activation configured in
                        <filename>.path</filename> units, as outlined
                        in
                        <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
                </refsect2>

                <refsect2>
                        <title>Timer-Based Activation</title>

                        <para>Some daemons that implement clean-up
                        jobs that are intended to be executed in
                        regular intervals benefit from timer-based
                        activation. In systemd, this is implemented
                        via <filename>.timer</filename> units, as
                        described in
                        <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
                </refsect2>

                <refsect2>
                        <title>Other Forms of Activation</title>

                        <para>Other forms of activation have been
                        suggested and implemented in some
                        systems. However, often there are simpler or
                        better alternatives, or they can be put
                        together of combinations of the schemes
                        above. Example: sometimes it appears useful to
                        start daemons or <filename>.socket</filename>
                        units when a specific IP address is configured
                        on a network interface, because network
                        sockets shall be bound to the
                        address. However, an alternative to implement
                        this is by utilizing the Linux IP_FREEBIND
                        socket option, as accessible via
                        <varname>FreeBind=yes</varname> in systemd
                        socket files (see
                        <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                        for details). This option, when enabled,
                        allows sockets to be bound to a non-local, not
                        configured IP address, and hence allows
                        bindings to a particular IP address before it
                        actually becomes available, making such an
                        explicit dependency to the configured address
                        redundant. Another often suggested trigger for
                        service activation is low system
                        load. However, here too, a more convincing
                        approach might be to make proper use of
                        features of the operating system: in
                        particular, the CPU or IO scheduler of
                        Linux. Instead of scheduling jobs from
                        userspace based on monitoring the OS
                        scheduler, it is advisable to leave the
                        scheduling of processes to the OS scheduler
                        itself. systemd provides fine-grained access
                        to the CPU and IO schedulers. If a process
                        executed by the init system shall not
                        negatively impact the amount of CPU or IO
                        bandwith available to other processes, it
                        should be configured with
                        <varname>CPUSchedulingPolicy=idle</varname>
                        and/or
                        <varname>IOSchedulingClass=idle</varname>. Optionally,
                        this may be combined with timer-based
                        activation to schedule background jobs during
                        runtime and with minimal impact on the system,
                        and remove it from the boot phase
                        itself.</para>
                </refsect2>

        </refsect1>
        <refsect1>
                <title>Integration with Systemd</title>

                <refsect2>
                        <title>Writing Systemd Unit Files</title>

                        <para>When writing systemd unit files, it is
                        recommended to consider the following
                        suggestions:</para>

                        <orderedlist>
                                <listitem><para>If possible do not use
                                the <varname>Type=forking</varname>
                                setting in service files. But if you
                                do, make sure to set the PID file path
                                using <varname>PIDFile=</varname>. See
                                <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                                for details.</para></listitem>

                                <listitem><para>If your daemon
                                registers a D-Bus name on the bus,
                                make sure to use
                                <varname>Type=dbus</varname> in the
                                service file if
                                possible.</para></listitem>

                                <listitem><para>Make sure to set a
                                good human-readable description string
                                with
                                <varname>Description=</varname>.</para></listitem>

                                <listitem><para>Do not disable
                                <varname>DefaultDependencies=</varname>,
                                unless you really know what you do and
                                your unit is involved in early boot or
                                late system shutdown.</para></listitem>

                                <listitem><para>Normally, little if
                                any dependencies should need to
                                be defined explicitly. However, if you
                                do configure explicit dependencies, only refer to
                                unit names listed on
                                <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>
                                or names introduced by your own
                                package to keep the unit file
                                operating
                                system-independent.</para></listitem>

                                <listitem><para>Since not all syslog
                                implementations are socket-activatable
                                yet, it is recommended to place an
                                <varname>After=syslog.target</varname>
                                dependency in service files for
                                daemons that can log to
                                syslog. <filename>syslog.target</filename>
                                then either pulls in the syslog daemon
                                itself or simply the activation
                                socket. A <varname>Wants=</varname> or
                                even <varname>Requires=</varname>
                                dependency should generally not be
                                added, since it should be up to the
                                administrator whether he wants to
                                enable logging or not, and most syslog
                                clients work fine if no log daemon is
                                running.</para></listitem>

                                <listitem><para>Make sure to include
                                an <literal>[Install]</literal>
                                section including installation
                                information for the unit file. See
                                <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                                for details. To activate your service
                                on boot make sure to add a
                                <varname>WantedBy=multi-user.target</varname>
                                or
                                <varname>WantedBy=graphical.target</varname>
                                directive. To activate your socket on
                                boot, make sure to add
                                <varname>WantedBy=sockets.target</varname>. Usually
                                you also want to make sure that when
                                your service is installed your socket
                                is installed too, hence add
                                <varname>Also=foo.socket</varname> in
                                your service file
                                <filename>foo.service</filename>, for
                                a hypothetical program
                                <filename>foo</filename>.</para></listitem>

                        </orderedlist>
                </refsect2>

                <refsect2>
                        <title>Installing Systemd Service Files</title>

                        <para>At the build installation time
                        (e.g. <command>make install</command> during
                        package build) packages are recommended to
                        install their systemd unit files in the
                        directory returned by <command>pkg-config
                        systemd
                        --variable=systemdsystemunitdir</command>
                        (for system services),
                        resp. <command>pkg-config systemd
                        --variable=systemdsessionunitdir</command>
                        (for session services). This will make the
                        services available in the system on explicit
                        request but not activate them automatically
                        during boot. Optionally, during package
                        installation (e.g. <command>rpm -i</command>
                        by the administrator) symlinks should be
                        created in the systemd configuration
                        directories via the
                        <citerefentry><refentrytitle>systemd-install</refentrytitle><manvolnum>1</manvolnum></citerefentry>
                        tool, to activate them automatically on
                        boot.</para>

                        <para>Packages using
                        <citerefentry><refentrytitle>autoconf</refentrytitle><manvolnum>1</manvolnum></citerefentry>
                        are recommended to use a configure script
                        excerpt like the following to determine the
                        unit installation path during source
                        configuration:</para>

                        <programlisting>PKG_PROG_PKG_CONFIG
AC_ARG_WITH([systemdsystemunitdir],
        AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files]),
        [], [with_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)])
AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])
AM_CONDITIONAL(HAVE_SYSTEMD, [test -n "$with_systemdsystemunitdir"])</programlisting>

                        <para>This snippet allows automatic
                        installation of the unit files on systemd
                        machines, and optionally allows their
                        installation even on machines lacking
                        systemd. (Modification of this snippet for the
                        session unit directory is left as excercise to the
                        reader.)</para>

                        <para>Additionally, to ensure that
                        <command>make distcheck</command> continues to
                        work, it is recommended to add the following
                        to the top-level <filename>Makefile.am</filename>
                        file in
                        <citerefentry><refentrytitle>automake</refentrytitle><manvolnum>1</manvolnum></citerefentry>-based
                        projects:</para>

                        <programlisting>DISTCHECK_CONFIGURE_FLAGS = \
        --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)</programlisting>

                        <para>Finally, unit files should be installed in the system with an automake excerpt like the following:</para>

                        <programlisting>if HAVE_SYSTEMD
systemdsystemunit_DATA = \
        foobar.socket \
        foobar.service
endif</programlisting>

                        <para>In the
                        <citerefentry><refentrytitle>rpm</refentrytitle><manvolnum>8</manvolnum></citerefentry>
                        <filename>.spec</filename> file use a snippet like
                        the following to enable/disable the service
                        during installation/deinstallation. Consult
                        the packaging guidelines of your distribution
                        for details and the equivalent for other
                        package managers:</para>

                        <programlisting>%post
/usr/bin/systemd-install --realize enable foobar.service foobar.socket >/dev/null 2>&amp;1 || :

%preun
if [ "$1" -eq 0 ]; then
        /usr/bin/systemd-install --realize disable foobar.service foobar.socket >/dev/null 2>&amp;1 || :
fi</programlisting>

                        <para>Depending on whether your service should
                        or should not be started/stopped/restarted
                        during package installation, deinstallation or
                        upgrade, a different argument to
                        <option>--realize=</option> may be
                        specified. See
                        <citerefentry><refentrytitle>systemd-install</refentrytitle><manvolnum>1</manvolnum></citerefentry>
                        for details.</para>

                </refsect2>
        </refsect1>

        <refsect1>
                <title>Porting Existing Daemons</title>

                <para>Since new-style init systems such as systemd are
                compatible with traditional SysV init systems it is
                not strictly necessary to port existing daemons to the
                new style. However doing so offers additional
                functionality to the daemons as well as simplifying
                integration into new-style init systems.</para>

                <para>To port an existing SysV compatible daemon the
                following steps are recommended:</para>

                <orderedlist>
                        <listitem><para>If not already implemented,
                        add an optional command line switch to the
                        daemon to disable daemonization. This is
                        useful not only for using the daemon in
                        new-style init systems, but also to ease
                        debugging.</para></listitem>

                        <listitem><para>If the daemon offers
                        interfaces to other software running on the
                        local system via local AF_UNIX sockets,
                        consider implementing socket-based activation
                        (see above). Usually a minimal patch is
                        sufficient to implement this: Extend the
                        socket creation in the daemon code so that
                        <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>
                        is checked for already passed sockets
                        first. If sockets are passed (i.e. when
                        <function>sd_listen_fds()</function> returns a
                        positive value), skip the socket creation step
                        and use the passed sockets. Secondly, ensure
                        that the file-system socket nodes for local
                        AF_UNIX sockets used in the socket-based
                        activation are not removed when the daemon
                        shuts down, if sockets have been
                        passed. Third, if the daemon normally closes
                        all remaining open file descriptors as part of
                        its initialization, the sockets passed from
                        the init system must be spared. Since
                        new-style init systems guarantee that no
                        left-over file descriptors are passed to
                        executed processes, it might be a good choice
                        to simply skip the closing of all remaining
                        open file descriptors if sockets are
                        passed.</para></listitem>

                        <listitem><para>Write and install a systemd
                        unit file for the service (and the sockets if
                        socket-based activation is used, as well as a
                        path unit file, if the daemon processes a
                        spool directory), see above for
                        details.</para></listitem>

                        <listitem><para>If the daemon exposes
                        interfaces via D-Bus, write and install a
                        D-Bus activation file for the service, see
                        above for details.</para></listitem>
                </orderedlist>
        </refsect1>

        <refsect1>
                <title>See Also</title>
                <para>
                        <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>systemd-install</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
                        <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                </para>
        </refsect1>

</refentry>