<?xml version='1.0'?> <!--*-nxml-*--> <?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?> <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> <!-- This file is part of systemd. Copyright 2010 Lennart Poettering systemd is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. systemd is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with systemd; If not, see <http://www.gnu.org/licenses/>. --> <refentry id="journald.conf"> <refentryinfo> <title>journald.conf</title> <productname>systemd</productname> <authorgroup> <author> <contrib>Developer</contrib> <firstname>Lennart</firstname> <surname>Poettering</surname> <email>lennart@poettering.net</email> </author> </authorgroup> </refentryinfo> <refmeta> <refentrytitle>journald.conf</refentrytitle> <manvolnum>5</manvolnum> </refmeta> <refnamediv> <refname>journald.conf</refname> <refpurpose>Journal service configuration file</refpurpose> </refnamediv> <refsynopsisdiv> <para><filename>/etc/systemd/journald.conf</filename></para> </refsynopsisdiv> <refsect1> <title>Description</title> <para>This files configures various parameters of the systemd journal service <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> </refsect1> <refsect1> <title>Options</title> <para>All options are configured in the <literal>[Journal]</literal> section:</para> <variablelist> <varlistentry> <term><varname>Storage=</varname></term> <listitem><para>Controls where to store journal data. One of <literal>volatile</literal>, <literal>persistent</literal>, <literal>auto</literal> and <literal>none</literal>. If <literal>volatile</literal> journal log data will be stored only in memory, i.e. below the <filename>/run/log/journal</filename> hierarchy (which is created if needed). If <literal>persistent</literal> data will be stored preferably on disk, i.e. below the <filename>/var/log/journal</filename> hierarchy (which is created if needed), with a fallback to <filename>/run/log/journal</filename> (which is created if needed), during early boot and if the disk is not writable. <literal>auto</literal> is similar to <literal>persistent</literal> but the directory <filename>/var/log/journal</filename> is not created if needed, so that its existence controls where log data goes. <literal>none</literal> turns off all storage, all log data received will be dropped. Forwarding to other targets, such as the console, the kernel log buffer or a syslog daemon will still work however. Defaults to <literal>auto</literal>.</para></listitem> </varlistentry> <varlistentry> <term><varname>Compress=</varname></term> <listitem><para>Takes a boolean value. If enabled (the default) data objects that shall be stored in the journal and are larger than a certain threshold are compressed with the XZ compression algorithm before they are written to the file system.</para></listitem> </varlistentry> <varlistentry> <term><varname>Seal=</varname></term> <listitem><para>Takes a boolean value. If enabled (the default) and a sealing key is available (as created by <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s <option>--setup-keys</option> command), forward secure sealing (FSS) for all persistent journal files is enabled.</para></listitem> </varlistentry> <varlistentry> <term><varname>SplitMode=</varname></term> <listitem><para>Controls whether to split up journal files per user. One of <literal>login</literal>, <literal>uid</literal> and <literal>none</literal>. If <literal>login</literal> each logged in user will get his own journal files, but systemd user IDs will log into the system journal. If <literal>uid</literal> any user ID will get his own journal files regardless whether it belongs to a system service or refers to a real logged in user. If <literal>none</literal> journal files are not split up per-user and all messages are stored in the single system journal. Note that splitting up journal files per-user is only available of journals are stored persistently. If journals are stored on volatile storage (see above) only a single journal file for all user IDs is kept. Defaults to <literal>login</literal>.</para></listitem> </varlistentry> <varlistentry> <term><varname>RateLimitInterval=</varname></term> <term><varname>RateLimitBurst=</varname></term> <listitem><para>Configures the rate limiting that is applied to all messages generated on the system. If in the time interval defined by <varname>RateLimitInterval=</varname> more messages than specified in <varname>RateLimitBurst=</varname> are logged by a service all further messages within the interval are dropped, until the interval is over. A message about the number of dropped messages is generated. This rate limiting is applied per-service, so that two services which log do not interfere with each other's limit. Defaults to 100 messages in 10s. The time specification for <varname>RateLimitInterval=</varname> may be specified in the following units: <literal>s</literal>, <literal>min</literal>, <literal>h</literal>, <literal>ms</literal>, <literal>us</literal>. To turn off any kind of rate limiting, set either value to 0.</para></listitem> </varlistentry> <varlistentry> <term><varname>SystemMaxUse=</varname></term> <term><varname>SystemKeepFree=</varname></term> <term><varname>SystemMaxFileSize=</varname></term> <term><varname>SystemMinFileSize=</varname></term> <term><varname>RuntimeMaxUse=</varname></term> <term><varname>RuntimeKeepFree=</varname></term> <term><varname>RuntimeMaxFileSize=</varname></term> <term><varname>RuntimeMinFileSize=</varname></term> <listitem><para>Enforce size limits on the journal files stored. The options prefixed with <literal>System</literal> apply to the journal files when stored on a persistent file system, more specifically <filename>/var/log/journal</filename>. The options prefixed with <literal>Runtime</literal> apply to the journal files when stored on a volatile in-memory file system, more specifically <filename>/run/log/journal</filename>. The former is used only when <filename>/var</filename> is mounted, writable and the directory <filename>/var/log/journal</filename> exists. Otherwise only the latter applies. Note that this means that during early boot and if the administrator disabled persistent logging only the latter options apply, while the former apply if persistent logging is enabled and the system is fully booted up. <varname>SystemMaxUse=</varname> and <varname>RuntimeMaxUse=</varname> control how much disk space the journal may use up at maximum. Defaults to 10% of the size of the respective file system. <varname>SystemKeepFree=</varname> and <varname>RuntimeKeepFree=</varname> control how much disk space the journal shall always leave free for other uses if less than the disk space configured in <varname>SystemMaxUse=</varname> and <varname>RuntimeMaxUse=</varname> is available. Defaults to 5% of the size of the respective file system. <varname>SystemMaxFileSize=</varname> and <varname>RuntimeMaxFileSize=</varname> control how large individual journal files may grow at maximum. This influences the granularity in which disk space is made available through rotation, i.e. deletion of historic data. Defaults to one eighth of the values configured with <varname>SystemMaxUse=</varname> and <varname>RuntimeMaxUse=</varname>, so that usually seven rotated journal files are kept as history. <varname>SystemMinFileSize=</varname> and <varname>RuntimeMinFileSize=</varname> control how large individual journal files grow at minimum. Defaults to 64K. Specify values in bytes or use K, M, G, T, P, E as units for the specified sizes. Note that size limits are enforced synchronously to journal files as they are extended, and need no explicit rotation step triggered by time.</para></listitem> </varlistentry> <varlistentry> <term><varname>ForwardToSyslog=</varname></term> <term><varname>ForwardToKMsg=</varname></term> <term><varname>ForwardToConsole=</varname></term> <listitem><para>Control whether log messages received by the journal daemon shall be forwarded to a traditional syslog daemon, to the kernel log buffer (kmsg), or to the system console. These options take boolean arguments. If forwarding to syslog is enabled but no syslog daemon is running the respective option has no effect. By default only forwarding to syslog is enabled. These settings may be overridden at boot time with the kernel command line options <literal>systemd.journald.forward_to_syslog=</literal>, <literal>systemd.journald.forward_to_kmsg=</literal> and <literal>systemd.journald.forward_to_console=</literal>. </para></listitem> </varlistentry> <varlistentry> <term><varname>MaxLevelStore=</varname></term> <term><varname>MaxLevelSyslog=</varname></term> <term><varname>MaxLevelKMsg=</varname></term> <term><varname>MaxLevelConsole=</varname></term> <listitem><para>Controls the maximum log level of messages that are stored on disk, forwarded to syslog, kmsg or the console (if that is enabled, see above). As argument, takes one of <literal>emerg</literal>, <literal>alert</literal>, <literal>crit</literal>, <literal>err</literal>, <literal>warning</literal>, <literal>notice</literal>, <literal>info</literal>, <literal>debug</literal> or integer values in the range of 0..7 (corresponding to the same levels). Messages equal or below the log level specified are stored/forwarded, messages above are dropped. Defaults to <literal>debug</literal> for <varname>MaxLevelStore=</varname> and <varname>MaxLevelSyslog=</varname>, to ensure that the all messages are written to disk and forwarded to syslog. Defaults to <literal>notice</literal> for <varname>MaxLevelKMsg=</varname> and <literal>info</literal> for <varname>MaxLevelConsole=</varname>.</para></listitem> </varlistentry> <varlistentry> <term><varname>TTYPath=</varname></term> <listitem><para>Change the console TTY to use if <varname>ForwardToConsole=yes</varname> is used. Defaults to <filename>/dev/console</filename>.</para></listitem> </varlistentry> </variablelist> </refsect1> <refsect1> <title>See Also</title> <para> <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> </para> </refsect1> </refentry>