systemd Developer Lennart Poettering lennart@poettering.net machinectl 1 machinectl Control the systemd machine manager machinectl OPTIONS COMMAND NAME machinectl may be used to introspect and control the state of the systemd1 virtual machine and container registration manager systemd-machined.service8. machinectl may be used to execute operations on machines and images. Machines in this sense are considered running instances of: Virtual Machines (VMs) that virtualize hardware to run full operating system (OS) instances (including their kernels) in a virtualized environment on top of the host OS. Containers that share the hardware and OS kernel with the host OS, in order to run OS userspace instances on top the host OS. The host system itself Machines are identified by names that follow the same rules as UNIX and DNS host names, for details see below. Machines are instantiated from disk or file system images, that frequently but not necessarily carry the same name as machines running from them. Images in this sense are considered: Directory trees containing an OS, including its top-level directories /usr, /etc, and so on. btrfs subvolumes containing OS trees, similar to normal directory trees. Binary "raw" disk images containing MBR or GPT partition tables and Linux file system partitions. The file system tree of the host OS itself. The following options are understood: -p --property= When showing machine or image properties, limit the output to certain properties as specified by the argument. If not specified, all set properties are shown. The argument should be a property name, such as Name. If specified more than once, all properties with the specified names are shown. -a --all When showing machine or image properties, show all properties regardless of whether they are set or not. When listing VM or container images, do not suppress images beginning in a dot character (.). -l --full Do not ellipsize process tree entries. --no-ask-password Do not query the user for authentication for privileged operations. --kill-who= When used with kill, choose which processes to kill. Must be one of leader, or all to select whether to kill only the leader process of the machine or all processes of the machine. If omitted, defaults to all. -s --signal= When used with kill, choose which signal to send to selected processes. Must be one of the well-known signal specifiers, such as SIGTERM, SIGINT or SIGSTOP. If omitted, defaults to SIGTERM. --uid= When used with the shell command, chooses the user ID to open the interactive shell session as. If this switch is not specified, defaults to root. Note that this switch is not supported for the login command (see below). --setenv= When used with the shell command, sets an environment variable to pass to the executed shell. Takes a pair of environment variable name and value, separated by = as argument. This switch may be used multiple times to set multiple environment variables. Note that this switch is not supported for the login command (see below). --mkdir When used with bind creates the destination directory before applying the bind mount. --read-only When used with bind applies a read-only bind mount. -n --lines= When used with status, controls the number of journal lines to show, counting from the most recent ones. Takes a positive integer argument. Defaults to 10. -o --output= When used with status, controls the formatting of the journal entries that are shown. For the available choices, see journalctl1. Defaults to short. --verify= When downloading a container or VM image, specify whether the image shall be verified before it is made available. Takes one of no, checksum and signature. If no no verification is done. If checksum is specified the download is checked for integrity after transfer is complete, but no signatures are verified. If signature is specified, the checksum is verified and the images's signature is checked against a local keyring of trustable vendors. It is strongly recommended to set this option to signature if the server and protocol support this. Defaults to signature. --force When downloading a container or VM image, and a local copy by the specified local machine name already exists, delete it first and replace it by the newly downloaded image. --dkr-index-url Specifies the index server to use for downloading dkr images with the pull-dkr. Takes a http://, https:// URL. --format= When used with the export-tar or export-raw commands specifies the compression format to use for the resulting file. Takes one of uncompressed, xz, gzip, bzip2. By default the format is determined automatically from the image file name passed. The following commands are understood: list List currently running (online) virtual machines and containers. To enumerate machine images that can be started, use list-images (see below). Note that this command hides the special .host machine by default. Use the --all switch to show it. status NAME... Show terse runtime status information about one or more virtual machines and containers, followed by the most recent log data from the journal. This function is intended to generate human-readable output. If you are looking for computer-parsable output, use show instead. Note that the log data shown is reported by the virtual machine or container manager, and frequently contains console output of the machine, but not necessarily journal contents of the machine itself. show [NAME...] Show properties of one or more registered virtual machines or containers or the manager itself. If no argument is specified, properties of the manager will be shown. If an NAME is specified, properties of this virtual machine or container are shown. By default, empty properties are suppressed. Use --all to show those too. To select specific properties to show, use --property=. This command is intended to be used whenever computer-parsable output is required. Use status if you are looking for formatted human-readable output. start NAME... Start a container as a system service, using systemd-nspawn1. This starts systemd-nspawn@.service, instantiated for the specified machine name, similar to the effect of systemctl start on the service name. systemd-nspawn looks for a container image by the specified name in /var/lib/machines/ (and other search paths, see below) and runs it. Use list-images (see below), for listing available container images to start. Note that systemd-machined.service8 also interfaces with a variety of other container and VM managers, systemd-nspawn is just one implementation of it. Most of the commands available in machinectl may be used on containers or VMs controlled by other managers, not just systemd-nspawn. Starting VMs and container images on those managers requires manager-specific tools. To interactively start a container on the command line with full access to the container's console, please invoke systemd-nspawn directly. To stop a running container use machinectl poweroff, see below. login [NAME] Open an interactive terminal login session in a container or on the local host. If an argument is supplied it refers to the container machine to connect to. If none is specified, or the container name is specified as the empty string, or the special machine name .host (see below) is specified, the connection is made to the local host instead. This will create a TTY connection to a specific container or the local host and asks for the execution of a getty on it. Note that this is only supported for containers running systemd1 as init system. This command will open a full login prompt on the container or the local host, which then asks for username and password. Use shell (see below) or systemd-run1 with the --machine= switch to directly invoke a single command, either interactively or in the background. shell [NAME [PATH [ARGUMENTS...]]] Open an interactive shell session in a container or on the local host. The first argument refers to the container machine to connect to. If none is specified, or the machine name is specified as the empty string, or the special machine name .host (see below) is specified, the connection is made to the local host instead. This works similar to login but immediately invokes a user process. This command runs the specified executable with the specified arguments, or /bin/sh if none is specified. By default opens a root shell, but using --uid= a different user may be selected. Use --setenv= to set environment variables for the executed process. enable NAME... disable NAME... Enable or disable a container as a system service to start at system boot, using systemd-nspawn1. This enables or disables systemd-nspawn@.service, instantiated for the specified machine name, similar to the effect of systemctl enable or systemctl disable on the service name. poweroff NAME... Power off one or more containers. This will trigger a reboot by sending SIGRTMIN+4 to the container's init process, which causes systemd-compatible init systems to shut down cleanly. This operation does not work on containers that do not run a systemd1-compatible init system, such as sysvinit. Use terminate (see below) to immediately terminate a container or VM, without cleanly shutting it down. reboot NAME... Reboot one or more containers. This will trigger a reboot by sending SIGINT to the container's init process, which is roughly equivalent to pressing Ctrl+Alt+Del on a non-containerized system, and is compatible with containers running any system manager. terminate NAME... Immediately terminates a virtual machine or container, without cleanly shutting it down. This kills all processes of the virtual machine or container and deallocates all resources attached to that instance. Use poweroff to issue a clean shutdown request. kill NAME... Send a signal to one or more processes of the virtual machine or container. This means processes as seen by the host, not the processes inside the virtual machine or container. Use --kill-who= to select which process to kill. Use --signal= to select the signal to send. bind NAME PATH [PATH] Bind mounts a directory from the host into the specified container. The first directory argument is the source directory on the host, the second directory argument is the destination directory in the container. When the latter is omitted the destination path in the container is the same as the source path on the host. When combined with the --read-only switch a ready-only bind mount is created. When combined with the --mkdir switch the destination path is first created before the mount is applied. Note that this option is currently only supported for systemd-nspawn1 containers. copy-to NAME PATH [PATH] Copies files or directories from the host system into a running container. Takes a container name, followed by the source path on the host and the destination path in the container. If the destination path is omitted the same as the source path is used. copy-from NAME PATH [PATH] Copies files or directories from a container into the host system. Takes a container name, followed by the source path in the container the destination path on the host. If the destination path is omitted the same as the source path is used. list-images Show a list of locally installed container and VM images. This enumerates all raw disk images and container directories and subvolumes in /var/lib/machines/ (and other search paths, see below). Use start (see above) to run a container off one of the listed images. Note that by default containers whose name begins with a dot (.) are not shown. To show these too, specify --all. Note that a special image .host always implicitly exists and refers to the image the host itself is booted from. image-status [NAME...] Show terse status information about one or more container or VM images. This function is intended to generate human-readable output. Use show-image (see below) to generate computer-parsable output instead. show-image [NAME...] Show properties of one or more registered virtual machine or container images, or the manager itself. If no argument is specified, properties of the manager will be shown. If an NAME is specified, properties of this virtual machine or container image are shown. By default, empty properties are suppressed. Use --all to show those too. To select specific properties to show, use --property=. This command is intended to be used whenever computer-parsable output is required. Use image-status if you are looking for formatted human-readable output. clone NAME NAME Clones a container or VM image. The arguments specify the name of the image to clone and the name of the newly cloned image. Note that plain directory container images are cloned into subvolume images with this command. Note that cloning a container or VM image is optimized for btrfs file systems, and might not be efficient on others, due to file system limitations. Note that this command leaves host name, machine ID and all other settings that could identify the instance unmodified. The original image and the cloned copy will hence share these credentials, and it might be necessary to manually change them in the copy. rename NAME NAME Renames a container or VM image. The arguments specify the name of the image to rename and the new name of the image. read-only NAME [BOOL] Marks or (unmarks) a container or VM image read-only. Takes a VM or container image name, followed by a boolean as arguments. If the boolean is omitted, positive is implied, i.e. the image is marked read-only. remove NAME... Removes one or more container or VM images. The special image .host, which refers to the host's own directory tree may not be removed. set-limit [NAME] BYTES Sets the maximum size in bytes a specific container or VM image, or all images may grow up to on disk (disk quota). Takes either one or two parameters. The first, optional parameter refers to a container or VM image name. If specified the size limit of the specified image is changed. If omitted the overall size limit of the sum of all images stored locally is changed. The final argument specifies the size limit in bytes, possibly suffixed by the usual K, M, G, T units. If the size limit shall be disabled, specify - as size. Note that per-container size limits are only supported on btrfs file systems. Also note that if set-limit is invoked without image parameter, and /var/lib/machines is empty, and the directory is not located on btrfs, a btrfs loopback file is implicitly created as /var/lib/machines.raw with the given size, and mounted to /var/lib/machines. The size of the loopback may later be readjusted with set-limit, as well. If such a loopback-mounted /var/lib/machines directory is used set-limit without image name alters both the quota setting within the file system as well as the loopback file and file system size itself. pull-tar URL [NAME] Downloads a .tar container image from the specified URL, and makes it available under the specified local machine name. The URL must be of type http:// or https://, and must refer to a .tar, .tar.gz, .tar.xz or .tar.bz2 archive file. If the local machine name is omitted it is automatically derived from the last component of the URL, with its suffix removed. The image is verified before it is made available, unless --verify=no is specified. Verification is done via SHA256SUMS and SHA256SUMS.gpg files, that need to be made available on the same web server, under the same URL as the .tar file, but with the last component (the filename) of the URL replaced. With --verify=checksum only the SHA256 checksum for the file is verified, based on the SHA256SUMS file. With --verify=signature the SHA256SUMS file is first verified with detached GPG signature file SHA256SUMS.gpg. The public key for this verification step needs to be available in /usr/lib/systemd/import-pubring.gpg or /etc/systemd/import-pubring.gpg. The container image will be downloaded and stored in a read-only subvolume in /var/lib/machines/, that is named after the specified URL and its HTTP etag. A writable snapshot is then taken from this subvolume, and named after the specified local name. This behavior ensures that creating multiple container instances of the same URL is efficient, as multiple downloads are not necessary. In order to create only the read-only image, and avoid creating its writable snapshot, specify - as local machine name. Note that the read-only subvolume is prefixed with .tar-, and is thus not shown by list-images, unless --all is passed. Note that pressing C-c during execution of this command will not abort the download. Use cancel-transfer, described below. pull-raw URL [NAME] Downloads a .raw container or VM disk image from the specified URL, and makes it available under the specified local machine name. The URL must be of type http:// or https://. The container image must either be a .qcow2 or raw disk image, optionally compressed as .gz, .xz, or .bz2. If the local machine name is omitted it is automatically derived from the last component of the URL, with its suffix removed. Image verification is identical for raw and tar images (see above). If the downloaded image is in .qcow2 format it is converted into a raw image file before it is made available. Downloaded images of this type will be placed as read-only .raw file in /var/lib/machines/. A local, writable (reflinked) copy is then made under the specified local machine name. To omit creation of the local, writable copy pass - as local machine name. Similar to the behavior of pull-tar, the read-only image is prefixed with .raw-, and thus not shown by list-images, unless --all is passed. Note that pressing C-c during execution of this command will not abort the download. Use cancel-transfer, described below. pull-dkr REMOTE [NAME] Downloads a dkr container image and makes it available locally. The remote name refers to a dkr container name. If omitted, the local machine name is derived from the dkr container name. Image verification is not available for dkr containers, and thus --verify=no must always be specified with this command. This command downloads all (missing) layers for the specified container and places them in read-only subvolumes in /var/lib/machines/. A writable snapshot of the newest layer is then created under the specified local machine name. To omit creation of this writable snapshot, pass - as local machine name. The read-only layer subvolumes are prefixed with .dkr-, and thus not shown by list-images, unless --all is passed. To specify the dkr index server to use for looking up the specified container, use --dkr-index-url=. Note that pressing C-c during execution of this command will not abort the download. Use cancel-transfer, described below. import-tar FILE [NAME] import-raw FILE [NAME] Imports a TAR or RAW container or VM image, and places it under the specified name in /var/lib/machines/. When import-tar is used the file specified as first argument should be a tar archive, possibly compressed with xz, gzip or bzip2. It will then be unpacked into its own subvolume in /var/lib/machines. When import-raw is used the file should be a qcow2 or raw disk image, possibly compressed with xz, gzip or bzip2. If the second argument (the resulting image name) is not specified it is automatically derived from the file name. If the file name is passed as - the image is read from standard input, in which case the second argument is mandatory. Similar as with pull-tar, pull-raw the file system /var/lib/machines.raw is increased in size of necessary and appropriate. Optionally the --read-only switch may be used to create a read-only container or VM image. No cryptographic validation is done when importing the images. Much like image downloads, ongoing imports may be listed with list-transfers and aborted with cancel-transfer. export-tar NAME [FILE] export-raw NAME [FILE] Exports a TAR or RAW container or VM image and stores it in the specified file. The first parameter should be a VM or container image name. The second parameter should be a file path the TAR or RAW image is written to. If the path ends in .gz the file is compressed with gzip, if it ends in .xz with xz, and if it ends in .bz2 with bzip2. If the path ends in neither the file is left uncompressed. If the second argument is missing the image is written to standard output. The compression may also be explicitly selected with the --format= switch. This is in particular useful if the second parameter is left unspecified. Much like image downloads and imports, ongoing exports may be listed with list-transfers and aborted with cancel-transfer. Note that currently only directory and subvolume images may be exported as TAR images, and only raw disk images as RAW images. list-transfers Shows a list of container or VM image downloads, imports and exports that are currently in progress. cancel-transfers ID... Aborts a download, import or export of the container or VM image with the specified ID. To list ongoing transfers and their IDs, use list-transfers. The machinectl tool operates on machines and images, whose names must be chosen following strict rules. Machine names must be suitable for use as host names following a conservative subset of DNS and UNIX/Linux semantics. Specifically, they must consist of one or more non-empty label strings, separated by dots. No leading or trailing dots are allowed. No sequences of multiple dots are allowed. The label strings may only consists of alphanumeric characters as well as the dash and underscore. The maximum length of a machine name is 64 characters. A special machine with the name .host refers to the running host system itself. This is useful for execution operations or inspecting the host system as well. Not that machinectl list will not show this special machine unless the --all switch is specified. Requirements on image names are less strict, however must be valid UTF-8, must be suitable as file names (hence not be the single or double dot, and not include a slash), and may not contain control characters. Since many operations search for an image by the name of a requested machine it is recommended to name images in the same strict fashion as machines. A special image with the name .host refers to the image of the running host system. It is hence conceptually maps to the special .host machine name described above. Note that machinectl list-images won't show this special image either, unless --all is specified. Machine images are preferably stored in /var/lib/machines/, but are also searched for in /usr/local/lib/machines/ and /usr/lib/machines/. For compatibility reasons the directory /var/lib/container/ is searched, too. Note that images stored below /usr are always considered read-only. It is possible to symlink machines images from other directories into /var/lib/machines/ to make them available for control with machinectl. Note that many image operations are only supported, efficient or atomic on btrfs file systems. Due to this, if the pull-tar, pull-raw, pull-dkr, import-tar, import-raw and set-limit commands notice that /var/lib/machines is empty and not located on btrfs, they will implicitly set up a loopback file /var/lib/machines.raw containing a btrfs file system that is mounted to /var/lib/machines. The size of this loopback file may be controlled dynamically with set-limit. Disk images are understood by systemd-nspawn1 and machinectl in three formats: A simple directory tree, containing the files and directories of the container to boot. A subvolume (on btrfs file systems), which are similar to the simple directories, described above. However, they have additional benefits, such as efficient cloning and quota reporting. "Raw" disk images, i.e. binary images of disks with a GPT or MBR partition table. Images of this type are regular files with the suffix .raw. See systemd-nspawn1 for more information on image formats, in particular it's --directory= and --image= options. # machinectl pull-tar https://cloud-images.ubuntu.com/trusty/current/trusty-server-cloudimg-amd64-root.tar.gz # systemd-nspawn -M trusty-server-cloudimg-amd64-root This downloads and verifies the specified .tar image, and then uses systemd-nspawn1 to open a shell in it. # machinectl pull-raw --verify=no http://ftp.halifax.rwth-aachen.de/fedora/linux/releases/21/Cloud/Images/x86_64/Fedora-Cloud-Base-20141203-21.x86_64.raw.xz # systemd-nspawn -M Fedora-Cloud-Base-20141203-21 # passwd # exit # machinectl start Fedora-Cloud-Base-20141203-21 # machinectl login Fedora-Cloud-Base-20141203-21 This downloads the specified .raw image with verification disabled. Then a shell is opened in it and a root password is set. Afterwards the shell is left, and the machine started as system service. With the last command a login prompt into the container is requested. # machinectl pull-dkr --verify=no mattdm/fedora # systemd-nspawn -M fedora Downloads a dkr image and opens a shell in it. Note that the specified download command might require an index server to be specified with the --dkr-index-url=. # machinectl export-tar fedora myfedora.tar.xz Exports the container fedora in an xz-compress tar file myfedora.tar.xz in the current directory. On success, 0 is returned, a non-zero failure code otherwise. systemd-machined.service8, systemd-nspawn1, systemd.special7, tar1, xz1, gzip1, bzip21