<?xml version='1.0'?> <!--*-nxml-*--> <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> <!-- This file is part of systemd. Copyright 2012 Lennart Poettering systemd is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. systemd is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with systemd; If not, see <http://www.gnu.org/licenses/>. --> <refentry id="systemd-analyze" xmlns:xi="http://www.w3.org/2001/XInclude"> <refentryinfo> <title>systemd-analyze</title> <productname>systemd</productname> <authorgroup> <author> <contrib>Developer</contrib> <firstname>Lennart</firstname> <surname>Poettering</surname> <email>lennart@poettering.net</email> </author> <author> <contrib>Developer</contrib> <firstname>Harald</firstname> <surname>Hoyer</surname> <email>harald@redhat.com</email> </author> </authorgroup> </refentryinfo> <refmeta> <refentrytitle>systemd-analyze</refentrytitle> <manvolnum>1</manvolnum> </refmeta> <refnamediv> <refname>systemd-analyze</refname> <refpurpose>Analyze system boot-up performance</refpurpose> </refnamediv> <refsynopsisdiv> <cmdsynopsis> <command>systemd-analyze</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg>time</arg> </cmdsynopsis> <cmdsynopsis> <command>systemd-analyze</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="plain">blame</arg> </cmdsynopsis> <cmdsynopsis> <command>systemd-analyze</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="plain">critical-chain</arg> <arg choice="opt" rep="repeat"><replaceable>UNIT</replaceable></arg> </cmdsynopsis> <cmdsynopsis> <command>systemd-analyze</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="plain">plot</arg> <arg choice="opt">> file.svg</arg> </cmdsynopsis> <cmdsynopsis> <command>systemd-analyze</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="plain">dot</arg> <arg choice="opt" rep="repeat"><replaceable>PATTERN</replaceable></arg> <arg choice="opt">> file.dot</arg> </cmdsynopsis> <cmdsynopsis> <command>systemd-analyze</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="plain">dump</arg> </cmdsynopsis> <cmdsynopsis> <command>systemd-analyze</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="plain">set-log-level</arg> <arg choice="plain"><replaceable>LEVEL</replaceable></arg> </cmdsynopsis> <cmdsynopsis> <command>systemd-analyze</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="plain">set-log-target</arg> <arg choice="plain"><replaceable>TARGET</replaceable></arg> </cmdsynopsis> <cmdsynopsis> <command>systemd-analyze</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="plain">verify</arg> <arg choice="opt" rep="repeat"><replaceable>FILES</replaceable></arg> </cmdsynopsis> </refsynopsisdiv> <refsect1> <title>Description</title> <para><command>systemd-analyze</command> may be used to determine system boot-up performance statistics and retrieve other state and tracing information from the system and service manager, and to verify the correctness of unit files.</para> <para><command>systemd-analyze time</command> prints the time spent in the kernel before userspace has been reached, the time spent in the initial RAM disk (initrd) before normal system userspace has been reached, and the time normal system userspace took to initialize. Note that these measurements simply measure the time passed up to the point where all system services have been spawned, but not necessarily until they fully finished initialization or the disk is idle.</para> <para><command>systemd-analyze blame</command> prints a list of all running units, ordered by the time they took to initialize. This information may be used to optimize boot-up times. Note that the output might be misleading as the initialization of one service might be slow simply because it waits for the initialization of another service to complete.</para> <para><command>systemd-analyze critical-chain [<replaceable>UNIT...</replaceable>]</command> prints a tree of the time-critical chain of units (for each of the specified <replaceable>UNIT</replaceable>s or for the default target otherwise). The time after the unit is active or started is printed after the "@" character. The time the unit takes to start is printed after the "+" character. Note that the output might be misleading as the initialization of one service might depend on socket activation and because of the parallel execution of units.</para> <para><command>systemd-analyze plot</command> prints an SVG graphic detailing which system services have been started at what time, highlighting the time they spent on initialization.</para> <para><command>systemd-analyze dot</command> generates textual dependency graph description in dot format for further processing with the GraphViz <citerefentry project='die-net'><refentrytitle>dot</refentrytitle><manvolnum>1</manvolnum></citerefentry> tool. Use a command line like <command>systemd-analyze dot | dot -Tsvg > systemd.svg</command> to generate a graphical dependency tree. Unless <option>--order</option> or <option>--require</option> is passed, the generated graph will show both ordering and requirement dependencies. Optional pattern globbing style specifications (e.g. <filename>*.target</filename>) may be given at the end. A unit dependency is included in the graph if any of these patterns match either the origin or destination node.</para> <para><command>systemd-analyze dump</command> outputs a (usually very long) human-readable serialization of the complete server state. Its format is subject to change without notice and should not be parsed by applications.</para> <para><command>systemd-analyze set-log-level <replaceable>LEVEL</replaceable></command> changes the current log level of the <command>systemd</command> daemon to <replaceable>LEVEL</replaceable> (accepts the same values as <option>--log-level=</option> described in <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>).</para> <para><command>systemd-analyze set-log-target <replaceable>TARGET</replaceable></command> changes the current log target of the <command>systemd</command> daemon to <replaceable>TARGET</replaceable> (accepts the same values as <option>--log-target=</option>, described in <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>).</para> <para><command>systemd-analyze verify</command> will load unit files and print warnings if any errors are detected. Files specified on the command line will be loaded, but also any other units referenced by them. This command works by prepending the directories for all command line arguments at the beginning of the unit load path, which means that all units files found in those directories will be used in preference to the unit files found in the standard locations, even if not listed explicitly.</para> <para>If no command is passed, <command>systemd-analyze time</command> is implied.</para> </refsect1> <refsect1> <title>Options</title> <para>The following options are understood:</para> <variablelist> <varlistentry> <term><option>--user</option></term> <listitem><para>Operates on the user systemd instance.</para></listitem> </varlistentry> <varlistentry> <term><option>--system</option></term> <listitem><para>Operates on the system systemd instance. This is the implied default.</para></listitem> </varlistentry> <varlistentry> <term><option>--order</option></term> <term><option>--require</option></term> <listitem><para>When used in conjunction with the <command>dot</command> command (see above), selects which dependencies are shown in the dependency graph. If <option>--order</option> is passed, only dependencies of type <varname>After=</varname> or <varname>Before=</varname> are shown. If <option>--require</option> is passed, only dependencies of type <varname>Requires=</varname>, <varname>Requisite=</varname>, <varname>Wants=</varname> and <varname>Conflicts=</varname> are shown. If neither is passed, this shows dependencies of all these types.</para></listitem> </varlistentry> <varlistentry> <term><option>--from-pattern=</option></term> <term><option>--to-pattern=</option></term> <listitem><para>When used in conjunction with the <command>dot</command> command (see above), this selects which relationships are shown in the dependency graph. Both options require a <citerefentry project='die-net'><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry> pattern as an argument, which will be matched against the left-hand and the right-hand, respectively, nodes of a relationship.</para> <para>Each of these can be used more than once, in which case the unit name must match one of the values. When tests for both sides of the relation are present, a relation must pass both tests to be shown. When patterns are also specified as positional arguments, they must match at least one side of the relation. In other words, patterns specified with those two options will trim the list of edges matched by the positional arguments, if any are given, and fully determine the list of edges shown otherwise.</para></listitem> </varlistentry> <varlistentry> <term><option>--fuzz=</option><replaceable>timespan</replaceable></term> <listitem><para>When used in conjunction with the <command>critical-chain</command> command (see above), also show units, which finished <replaceable>timespan</replaceable> earlier, than the latest unit in the same level. The unit of <replaceable>timespan</replaceable> is seconds unless specified with a different unit, e.g. "50ms".</para></listitem> </varlistentry> <varlistentry> <term><option>--no-man</option></term> <listitem><para>Do not invoke man to verify the existence of man pages listed in <varname>Documentation=</varname>. </para></listitem> </varlistentry> <xi:include href="user-system-options.xml" xpointer="host" /> <xi:include href="user-system-options.xml" xpointer="machine" /> <xi:include href="standard-options.xml" xpointer="help" /> <xi:include href="standard-options.xml" xpointer="version" /> <xi:include href="standard-options.xml" xpointer="no-pager" /> </variablelist> </refsect1> <refsect1> <title>Exit status</title> <para>On success, 0 is returned, a non-zero failure code otherwise.</para> </refsect1> <refsect1> <title>Examples for <command>dot</command></title> <example> <title>Plots all dependencies of any unit whose name starts with <literal>avahi-daemon</literal></title> <programlisting>$ systemd-analyze dot 'avahi-daemon.*' | dot -Tsvg > avahi.svg $ eog avahi.svg</programlisting> </example> <example> <title>Plots the dependencies between all known target units</title> <programlisting>systemd-analyze dot --to-pattern='*.target' --from-pattern='*.target' | dot -Tsvg > targets.svg $ eog targets.svg</programlisting> </example> </refsect1> <refsect1> <title>Examples for <command>verify</command></title> <para>The following errors are currently detected:</para> <itemizedlist> <listitem><para>unknown sections and directives, </para></listitem> <listitem><para>missing dependencies which are required to start the given unit, </para></listitem> <listitem><para>man pages listed in <varname>Documentation=</varname> which are not found in the system,</para></listitem> <listitem><para>commands listed in <varname>ExecStart=</varname> and similar which are not found in the system or not executable.</para></listitem> </itemizedlist> <example> <title>Misspelt directives</title> <programlisting>$ cat ./user.slice [Unit] WhatIsThis=11 Documentation=man:nosuchfile(1) Requires=different.service [Service] Desription=x $ systemd-analyze verify ./user.slice [./user.slice:9] Unknown lvalue 'WhatIsThis' in section 'Unit' [./user.slice:13] Unknown section 'Service'. Ignoring. Error: org.freedesktop.systemd1.LoadFailed: Unit different.service failed to load: No such file or directory. Failed to create user.slice/start: Invalid argument user.slice: man nosuchfile(1) command failed with code 16 </programlisting> </example> <example> <title>Missing service units</title> <programlisting>$ tail ./a.socket ./b.socket ==> ./a.socket <== [Socket] ListenStream=100 ==> ./b.socket <== [Socket] ListenStream=100 Accept=yes $ systemd-analyze verify ./a.socket ./b.socket Service a.service not loaded, a.socket cannot be started. Service b@0.service not loaded, b.socket cannot be started. </programlisting> </example> </refsect1> <xi:include href="less-variables.xml" /> <refsect1> <title>See Also</title> <para> <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> </para> </refsect1> </refentry>