<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> <!-- This file is part of systemd. Copyright 2013 Zbigniew Jędrzejewski-Szmek systemd is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. systemd is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with systemd; If not, see <http://www.gnu.org/licenses/>. --> <refentry id="systemd-run" xmlns:xi="http://www.w3.org/2001/XInclude"> <refentryinfo> <title>systemd-run</title> <productname>systemd</productname> <authorgroup> <author> <contrib>Developer</contrib> <firstname>Lennart</firstname> <surname>Poettering</surname> <email>lennart@poettering.net</email> </author> </authorgroup> </refentryinfo> <refmeta> <refentrytitle>systemd-run</refentrytitle> <manvolnum>1</manvolnum> </refmeta> <refnamediv> <refname>systemd-run</refname> <refpurpose>Run programs in transient scope or service or timer units</refpurpose> </refnamediv> <refsynopsisdiv> <cmdsynopsis> <command>systemd-run</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="plain"><replaceable>COMMAND</replaceable> <arg choice="opt" rep="repeat">ARGS</arg> </arg> </cmdsynopsis> <cmdsynopsis> <command>systemd-run</command> <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="opt" rep="repeat">TIMER OPTIONS</arg> <arg choice="req"><replaceable>COMMAND</replaceable></arg> <arg choice="opt" rep="repeat">ARGS</arg> </cmdsynopsis> </refsynopsisdiv> <refsect1> <title>Description</title> <para><command>systemd-run</command> may be used to create and start a transient <filename>.service</filename> or <filename>.scope</filename> unit and run the specified <replaceable>COMMAND</replaceable> in it. It may also be used to create and start transient <filename>.timer</filename> units.</para> <para>If a command is run as transient service unit, it will be started and managed by the service manager like any other service, and thus shows up in the output of <command>systemctl list-units</command> like any other unit. It will run in a clean and detached execution environment, with the service manager as its parent process. In this mode <command>systemd-run</command> will start the service asynchronously in the background and return after the command has begun execution.</para> <para>If a command is run as transient scope unit, it will be started by <command>systemd-run</command> itself as parent process and will thus inherit the execution environment of the caller. However, the processes of the command are managed by the service manager similar to normal services, and will show up in the output of <command>systemctl list-units</command>. Execution in this case is synchronous, and will return only when the command finishes. This mode is enabled via the <option>--scope</option> switch (see below). </para> <para>If a command is run with timer options such as <option>--on-calendar=</option> (see below), a transient timer unit is created alongside the service unit for the specified command. Only the transient timer unit is started immediately, the transient service unit will be started when the transient timer elapses. If the <option>--unit=</option> is specified, the <replaceable>COMMAND</replaceable> may be omitted. In this case, <command>systemd-run</command> only creates a <filename>.timer</filename> unit that invokes the specified unit when elapsing.</para> </refsect1> <refsect1> <title>Options</title> <para>The following options are understood:</para> <variablelist> <varlistentry> <term><option>--no-ask-password</option></term> <listitem><para>Do not query the user for authentication for privileged operations.</para></listitem> </varlistentry> <varlistentry> <term><option>--scope</option></term> <listitem> <para>Create a transient <filename>.scope</filename> unit instead of the default transient <filename>.service</filename> unit. </para> </listitem> </varlistentry> <varlistentry> <term><option>--unit=</option></term> <listitem><para>Use this unit name instead of an automatically generated one.</para></listitem> </varlistentry> <varlistentry> <term><option>--property=</option></term> <term><option>-p</option></term> <listitem><para>Sets a unit property for the scope or service unit that is created. This takes an assignment in the same format as <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s <command>set-property</command> command.</para> </listitem> </varlistentry> <varlistentry> <term><option>--description=</option></term> <listitem><para>Provide a description for the service or scope unit. If not specified, the command itself will be used as a description. See <varname>Description=</varname> in <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. </para></listitem> </varlistentry> <varlistentry> <term><option>--slice=</option></term> <listitem><para>Make the new <filename>.service</filename> or <filename>.scope</filename> unit part of the specified slice, instead of the <filename>system.slice</filename>.</para> </listitem> </varlistentry> <varlistentry> <term><option>--remain-after-exit</option></term> <listitem><para>After the service or scope process has terminated, keep the service around until it is explicitly stopped. This is useful to collect runtime information about the service after it finished running. Also see <varname>RemainAfterExit=</varname> in <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>. </para> </listitem> </varlistentry> <varlistentry> <term><option>--send-sighup</option></term> <listitem><para>When terminating the scope or service unit, send a SIGHUP immediately after SIGTERM. This is useful to indicate to shells and shell-like processes that the connection has been severed. Also see <varname>SendSIGHUP=</varname> in <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. </para> </listitem> </varlistentry> <varlistentry> <term><option>--service-type=</option></term> <listitem><para>Sets the service type. Also see <varname>Type=</varname> in <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>. This option has no effect in conjunction with <option>--scope</option>. Defaults to <constant>simple</constant>.</para> </listitem> </varlistentry> <varlistentry> <term><option>--uid=</option></term> <term><option>--gid=</option></term> <listitem><para>Runs the service process under the UNIX user and group. Also see <varname>User=</varname> and <varname>Group=</varname> in <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> </listitem> </varlistentry> <varlistentry> <term><option>--nice=</option></term> <listitem><para>Runs the service process with the specified nice level. Also see <varname>Nice=</varname> in <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> </listitem> </varlistentry> <varlistentry> <term><option>--setenv=</option></term> <listitem><para>Runs the service process with the specified environment variables set. Also see <varname>Environment=</varname> in <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> </listitem> </varlistentry> <varlistentry> <term><option>--pty</option></term> <term><option>-t</option></term> <listitem><para>When invoking a command as service connects its standard input and output to the invoking tty via a pseudo TTY device. This allows invoking binaries as services that expect interactive user input, such as interactive command shells.</para></listitem> </varlistentry> <varlistentry> <term><option>--quiet</option></term> <term><option>-q</option></term> <listitem><para>Suppresses additional informational output while running. This is particularly useful in combination with <option>--pty</option> when it will suppress the initial message explaining how to terminate the TTY connection.</para></listitem> </varlistentry> <varlistentry> <term><option>--on-active=</option></term> <term><option>--on-boot=</option></term> <term><option>--on-startup=</option></term> <term><option>--on-unit-active=</option></term> <term><option>--on-unit-inactive=</option></term> <listitem><para>Defines monotonic timers relative to different starting points. Also see <varname>OnActiveSec=</varname>, <varname>OnBootSec=</varname>, <varname>OnStartupSec=</varname>, <varname>OnUnitActiveSec=</varname> and <varname>OnUnitInactiveSec=</varname> in <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>. This options have no effect in conjunction with <option>--scope</option>.</para> </listitem> </varlistentry> <varlistentry> <term><option>--on-calendar=</option></term> <listitem><para>Defines realtime (i.e. wallclock) timers with calendar event expressions. Also see <varname>OnCalendar=</varname> in <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>. This option has no effect in conjunction with <option>--scope</option>.</para> </listitem> </varlistentry> <varlistentry> <term><option>--timer-property=</option></term> <listitem><para>Sets a timer unit property for the timer unit that is created. It is similar with <option>--property</option> but only for created timer unit. This option only has effect in conjunction with <option>--on-active=</option>, <option>--on-boot=</option>, <option>--on-startup=</option>, <option>--on-unit-active=</option>, <option>--on-unit-inactive=</option>, <option>--on-calendar=</option>. This takes an assignment in the same format as <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s <command>set-property</command> command.</para> </listitem> </varlistentry> <varlistentry> <term><option>--no-block</option></term> <listitem> <para>Do not synchronously wait for the requested operation to finish. If this is not specified, the job will be verified, enqueued and <command>systemd-run</command> will wait until the unit's start-up is completed. By passing this argument, it is only verified and enqueued.</para> </listitem> </varlistentry> <xi:include href="user-system-options.xml" xpointer="user" /> <xi:include href="user-system-options.xml" xpointer="system" /> <xi:include href="user-system-options.xml" xpointer="host" /> <xi:include href="user-system-options.xml" xpointer="machine" /> <xi:include href="standard-options.xml" xpointer="help" /> <xi:include href="standard-options.xml" xpointer="version" /> </variablelist> <para>All command line arguments after the first non-option argument become part of the command line of the launched process. If a command is run as service unit, its first argument needs to be an absolute binary path.</para> </refsect1> <refsect1> <title>Exit status</title> <para>On success, 0 is returned, a non-zero failure code otherwise.</para> </refsect1> <refsect1> <title>Examples</title> <para>The following command will log the environment variables provided by systemd to services:</para> <programlisting># systemd-run env Running as unit run-19945.service. # journalctl -u run-19945.service Sep 08 07:37:21 bupkis systemd[1]: Starting /usr/bin/env... Sep 08 07:37:21 bupkis systemd[1]: Started /usr/bin/env. Sep 08 07:37:21 bupkis env[19948]: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin Sep 08 07:37:21 bupkis env[19948]: LANG=en_US.UTF-8 Sep 08 07:37:21 bupkis env[19948]: BOOT_IMAGE=/vmlinuz-3.11.0-0.rc5.git6.2.fc20.x86_64</programlisting> <para>The following command invokes the <citerefentry project='man-pages'><refentrytitle>updatedb</refentrytitle><manvolnum>8</manvolnum></citerefentry> tool, but lowers the block IO weight for it to 10. See <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more information on the <varname>BlockIOWeight=</varname> property.</para> <programlisting># systemd-run -p BlockIOWeight=10 updatedb</programlisting> <para>The following command will touch a file after 30 seconds.</para> <programlisting># date; systemd-run --on-active=30 --timer-property=AccuracySec=100ms /bin/touch /tmp/foo Mon Dec 8 20:44:24 KST 2014 Running as unit run-71.timer. Will run as unit run-71.service. # journalctl -b -u run-71.timer -- Logs begin at Fri 2014-12-05 19:09:21 KST, end at Mon 2014-12-08 20:44:54 KST. -- Dec 08 20:44:38 container systemd[1]: Starting /bin/touch /tmp/foo. Dec 08 20:44:38 container systemd[1]: Started /bin/touch /tmp/foo. # journalctl -b -u run-71.service -- Logs begin at Fri 2014-12-05 19:09:21 KST, end at Mon 2014-12-08 20:44:54 KST. -- Dec 08 20:44:48 container systemd[1]: Starting /bin/touch /tmp/foo... Dec 08 20:44:48 container systemd[1]: Started /bin/touch /tmp/foo.</programlisting> <para>The following command invokes <filename>/bin/bash</filename> as a service passing its standard input, output and error to the calling TTY.</para> <programlisting># systemd-run -t /bin/bash</programlisting> </refsect1> <refsect1> <title>See Also</title> <para> <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> </para> </refsect1> </refentry>