<?xml version='1.0'?> <!--*-nxml-*--> <?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?> <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> <!-- This file is part of systemd. Copyright 2010 Lennart Poettering systemd is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. systemd is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with systemd; If not, see <http://www.gnu.org/licenses/>. --> <refentry id="systemd.conf"> <refentryinfo> <title>systemd.conf</title> <productname>systemd</productname> <authorgroup> <author> <contrib>Developer</contrib> <firstname>Lennart</firstname> <surname>Poettering</surname> <email>lennart@poettering.net</email> </author> </authorgroup> </refentryinfo> <refmeta> <refentrytitle>systemd.conf</refentrytitle> <manvolnum>5</manvolnum> </refmeta> <refnamediv> <refname>systemd.conf</refname> <refpurpose>systemd manager configuration file</refpurpose> </refnamediv> <refsynopsisdiv> <para><filename>/etc/systemd/system.conf</filename></para> <para><filename>/etc/systemd/user.conf</filename></para> </refsynopsisdiv> <refsect1> <title>Description</title> <para>When run as system instance systemd reads the configuration file <filename>system.conf</filename>, otherwise <filename>user.conf</filename>. These configuration files contain a few settings controlling basic manager operations.</para> </refsect1> <refsect1> <title>Options</title> <para>All options are configured in the <literal>[Manager]</literal> section:</para> <variablelist> <varlistentry> <term><varname>LogLevel=</varname></term> <term><varname>LogTarget=</varname></term> <term><varname>LogColor=</varname></term> <term><varname>LogLocation=</varname></term> <term><varname>DumpCore=yes</varname></term> <term><varname>CrashShell=no</varname></term> <term><varname>ShowStatus=yes</varname></term> <term><varname>CrashChVT=1</varname></term> <term><varname>DefaultStandardOutput=journal</varname></term> <term><varname>DefaultStandardError=inherit</varname></term> <listitem><para>Configures various parameters of basic manager operation. These options may be overridden by the respective command line arguments. See <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> for details about these command line arguments.</para></listitem> </varlistentry> <varlistentry> <term><varname>CPUAffinity=</varname></term> <listitem><para>Configures the initial CPU affinity for the init process. Takes a space-separated list of CPU indexes.</para></listitem> </varlistentry> <varlistentry> <term><varname>DefaultControllers=cpu</varname></term> <listitem><para>Configures in which cgroup controller hierarchies to create per-service cgroups automatically, in addition to the name=systemd named hierarchy. Defaults to 'cpu'. Takes a space separated list of controller names. Pass an empty string to ensure that systemd does not touch any hierarchies but its own.</para></listitem> </varlistentry> <varlistentry> <term><varname>JoinControllers=cpu,cpuacct</varname></term> <listitem><para>Configures controllers that shall be mounted in a single hierarchy. By default systemd will mount all controllers which are enabled in the kernel in individual hierachies, with the exception of those listed in this setting. Takes a space separated list of comma separated controller names, in order to allow multiple joined hierarchies. Defaults to 'cpu,cpuacct'. Pass an empty string to ensure that systemd mounts all controllers in separate hierarchies.</para></listitem> </varlistentry> <varlistentry> <term><varname>RuntimeWatchdogSec=</varname></term> <term><varname>ShutdownWatchdogSec=</varname></term> <listitem><para>Configure the hardware watchdog at runtime and at reboot. Takes a timeout value in seconds (or in other time units if suffixed with <literal>ms</literal>, <literal>min</literal>, <literal>h</literal>, <literal>d</literal>, <literal>w</literal>). If <varname>RuntimeWatchdogSec=</varname> is set to a non-zero value the watchdog hardware (<filename>/dev/watchdog</filename>) will be programmed to automatically reboot the system if it is not contacted within the specified timeout interval. The system manager will ensure to contact it at least once in half the specified timeout interval. This feature requires a hardware watchdog device to be present, as it is commonly the case in embedded and server systems. Not all hardware watchdogs allow configuration of the reboot timeout, in which case the closest available timeout is picked. <varname>ShutdownWatchdogSec=</varname> may be used to configure the hardware watchdog when the system is asked to reboot. It works as a safety net to ensure that the reboot takes place even if a clean reboot attempt times out. By default <varname>RuntimeWatchdogSec=</varname> defaults to 0 (off), and <varname>ShutdownWatchdogSec=</varname> to 10min. These settings have no effect if a hardware watchdog is not available.</para></listitem> </varlistentry> <varlistentry> <term><varname>CapabilityBoundingSet=</varname></term> <listitem><para>Controls which capabilities to include in the capability bounding set for PID 1 and its children. See <citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> for details. Takes a whitespace separated list of capability names as read by <citerefentry><refentrytitle>cap_from_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>. Capabilities listed will be included in the bounding set, all others are removed. If the list of capabilities is prefixed with ~ all but the listed capabilities will be included, the effect of the assignment inverted. Note that this option also effects the respective capabilities in the effective, permitted and inheritable capability sets. The capability bounding set may also be individually configured for units using the <varname>CapabilityBoundingSet=</varname> directive for units, but note that capabilities dropped for PID 1 cannot be regained in individual units, they are lost for good.</para></listitem> </varlistentry> <varlistentry> <term><varname>TimerSlackNSec=</varname></term> <listitem><para>Sets the timer slack in nanoseconds for PID 1 which is then inherited to all executed processes, unless overriden individually, for example with the <varname>TimerSlackNSec=</varname> setting in service units (for details see <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>). The timer slack controls the accuracy of wake-ups triggered by timers. See <citerefentry><refentrytitle>prctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> for more information. Note that in contrast to most other time span definitions this parameter takes an integer value in nano-seconds if no unit is specified. The usual time units are understood too.</para></listitem> </varlistentry> <varlistentry> <term><varname>DefaultLimitCPU=</varname></term> <term><varname>DefaultLimitFSIZE=</varname></term> <term><varname>DefaultLimitDATA=</varname></term> <term><varname>DefaultLimitSTACK=</varname></term> <term><varname>DefaultLimitCORE=</varname></term> <term><varname>DefaultLimitRSS=</varname></term> <term><varname>DefaultLimitNOFILE=</varname></term> <term><varname>DefaultLimitAS=</varname></term> <term><varname>DefaultLimitNPROC=</varname></term> <term><varname>DefaultLimitMEMLOCK=</varname></term> <term><varname>DefaultLimitLOCKS=</varname></term> <term><varname>DefaultLimitSIGPENDING=</varname></term> <term><varname>DefaultLimitMSGQUEUE=</varname></term> <term><varname>DefaultLimitNICE=</varname></term> <term><varname>DefaultLimitRTPRIO=</varname></term> <term><varname>DefaultLimitRTTIME=</varname></term> <listitem><para>These settings control various default resource limits for units. See <citerefentry><refentrytitle>setrlimit</refentrytitle><manvolnum>2</manvolnum></citerefentry> for details. Use the string <varname>infinity</varname> to configure no limit on a specific resource. These settings may be overriden in individual units using the corresponding LimitXXX= directives. Note that these resource limits are only defaults for units, they are not applied to PID 1 itself.</para></listitem> </varlistentry> </variablelist> </refsect1> <refsect1> <title>See Also</title> <para> <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> </para> </refsect1> </refentry>