<?xml version='1.0'?> <!--*-nxml-*--> <?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?> <!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> <!-- This file is part of systemd. Copyright 2010 Lennart Poettering systemd is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. systemd is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with systemd; If not, see <http://www.gnu.org/licenses/>. --> <refentry id="systemd.mount"> <refentryinfo> <title>systemd.mount</title> <productname>systemd</productname> <authorgroup> <author> <contrib>Developer</contrib> <firstname>Lennart</firstname> <surname>Poettering</surname> <email>lennart@poettering.net</email> </author> </authorgroup> </refentryinfo> <refmeta> <refentrytitle>systemd.mount</refentrytitle> <manvolnum>5</manvolnum> </refmeta> <refnamediv> <refname>systemd.mount</refname> <refpurpose>Mount unit configuration</refpurpose> </refnamediv> <refsynopsisdiv> <para><filename><replaceable>mount</replaceable>.mount</filename></para> </refsynopsisdiv> <refsect1> <title>Description</title> <para>A unit configuration file whose name ends in <literal>.mount</literal> encodes information about a file system mount point controlled and supervised by systemd.</para> <para>This man page lists the configuration options specific to this unit type. See <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> for the common options of all unit configuration files. The common configuration items are configured in the generic [Unit] and [Install] sections. The mount specific configuration options are configured in the [Mount] section.</para> <para>Additional options are listed in <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, which define the execution environment the <citerefentry><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> binary is executed in, and in <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, which define the way the processes are terminated, and in <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, which configure resource control settings for the processes of the service. Note that the User= and Group= options are not particularly useful for mount units specifying a <literal>Type=</literal> option or using configuration not specified in <filename>/etc/fstab</filename>; <citerefentry><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> will refuse options that are not listed in <filename>/etc/fstab</filename> if it is not run as UID 0.</para> <para>Mount units must be named after the mount point directories they control. Example: the mount point <filename noindex='true'>/home/lennart</filename> must be configured in a unit file <filename>home-lennart.mount</filename>. For details about the escaping logic used to convert a file system path to a unit name, see <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> <para>Optionally, a mount unit may be accompanied by an automount unit, to allow on-demand or parallelized mounting. See <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> <para>If a mount point is beneath another mount point in the file system hierarchy, a dependency between both units is created automatically.</para> <para>Mount points created at runtime (independently of unit files or <filename>/etc/fstab</filename>) will be monitored by systemd and appear like any other mount unit in systemd. See <filename>/proc/self/mountinfo</filename> description in <citerefentry><refentrytitle>proc</refentrytitle><manvolnum>5</manvolnum></citerefentry>. </para> <para>Some file systems have special semantics as API file systems for kernel-to-userspace and userspace-to-userpace interfaces. Some of them may not be changed via mount units, and cannot be disabled. For a longer discussion see <ulink url="http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems">API File Systems</ulink>.</para> </refsect1> <refsect1> <title><filename>/etc/fstab</filename></title> <para>Mount units may either be configured via unit files, or via <filename>/etc/fstab</filename> (see <citerefentry><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry> for details). Mounts listed in <filename>/etc/fstab</filename> will be converted into native units dynamically at boot and when the configuration of the system manager is reloaded. In general, configuring mount points through <filename>/etc/fstab</filename> is the preferred approach. See <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> for details about the conversion.</para> <para>When reading <filename>/etc/fstab</filename> a few special mount options are understood by systemd which influence how dependencies are created for mount points from <filename>/etc/fstab</filename>. systemd will create a dependency of type <option>Wants</option> from either <filename>local-fs.target</filename> or <filename>remote-fs.target</filename>, depending whether the file system is local or remote. If <option>x-systemd.automount</option> is set, an automount unit will be created for the file system. See <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry> for details. If <option>x-systemd.device-timeout=</option> is specified, it may be used to configure how long systemd should wait for a device to show up before giving up on an entry from <filename>/etc/fstab</filename>. Specify a time in seconds or explicitly specify a unit as <literal>s</literal>, <literal>min</literal>, <literal>h</literal>, <literal>ms</literal>.</para> <para>If <option>nofail</option> is given, this mount will be only wanted, not required, by the <filename>local-fs.target</filename>. This means that the boot will continue even if this mount point is not mounted successfully. Option <option>fail</option> has the opposite meaning and is the default.</para> <para>If <option>noauto</option> is given, this mount will not be added as a dependency for <filename>local-fs.target</filename>. This means that it will not be mounted automatically during boot, unless it is pulled in by some other unit. Option <option>auto</option> has the opposite meaning and is the default.</para> <para>If a mount point is configured in both <filename>/etc/fstab</filename> and a unit file that is stored below <filename>/usr</filename>, the former will take precedence. If the unit file is stored below <filename>/etc</filename>, it will take precedence. This means: native unit files take precedence over traditional configuration files, but this is superseded by the rule that configuration in <filename>/etc</filename> will always take precedence over configuration in <filename>/usr</filename>.</para> </refsect1> <refsect1> <title>Options</title> <para>Mount files must include a [Mount] section, which carries information about the file system mount points it supervises. A number of options that may be used in this section are shared with other unit types. These options are documented in <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> and <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. The options specific to the [Mount] section of mount units are the following:</para> <variablelist class='unit-directives'> <varlistentry> <term><varname>What=</varname></term> <listitem><para>Takes an absolute path of a device node, file or other resource to mount. See <citerefentry><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> for details. If this refers to a device node, a dependency on the respective device unit is automatically created. (See <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more information.) This option is mandatory.</para></listitem> </varlistentry> <varlistentry> <term><varname>Where=</varname></term> <listitem><para>Takes an absolute path of a directory of the mount point. If the mount point does not exist at the time of mounting, it is created. This string must be reflected in the unit filename. (See above.) This option is mandatory.</para></listitem> </varlistentry> <varlistentry> <term><varname>Type=</varname></term> <listitem><para>Takes a string for the file system type. See <citerefentry><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> for details. This setting is optional.</para></listitem> </varlistentry> <varlistentry> <term><varname>Options=</varname></term> <listitem><para>Mount options to use when mounting. This takes a comma-separated list of options. This setting is optional.</para></listitem> </varlistentry> <varlistentry> <term><varname>DirectoryMode=</varname></term> <listitem><para>Directories of mount points (and any parent directories) are automatically created if needed. This option specifies the file system access mode used when creating these directories. Takes an access mode in octal notation. Defaults to 0755.</para></listitem> </varlistentry> <varlistentry> <term><varname>TimeoutSec=</varname></term> <listitem><para>Configures the time to wait for the mount command to finish. If a command does not exit within the configured time, the mount will be considered failed and be shut down again. All commands still running will be terminated forcibly via <constant>SIGTERM</constant>, and after another delay of this time with <constant>SIGKILL</constant>. (See <option>KillMode=</option> in <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>.) Takes a unit-less value in seconds, or a time span value such as "5min 20s". Pass 0 to disable the timeout logic. The default value is set from the manager configuration file's <varname>DefaultTimeoutStart=</varname> variable.</para></listitem> </varlistentry> </variablelist> <para>Check <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> and <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more settings.</para> </refsect1> <refsect1> <title>See Also</title> <para> <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>proc</refentrytitle><manvolnum>5</manvolnum></citerefentry>, <citerefentry><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> </para> </refsect1> </refentry>