systemd Developer Lennart Poettering lennart@poettering.net systemd.service 5 systemd.service systemd service configuration files systemd.service A unit configuration file whose name ends in .service encodes information about a process controlled and supervised by systemd. This man page lists the configuration options specific to this unit type. See systemd.unit5 for the common options of all unit configuration files. The common configuration items are configured in the generic [Unit] and [Install] sections. The service specific configuration options are configured in the [Service] section. Additional options are listed in systemd.exec5, which define the execution environment the commands are executed in. Unless DefaultDependencies= is set to false, service units will implicitly have dependencies of type Requires= and After= on basic.target as well as dependencies of type Conflicts= and Before= on shutdown.target. These ensure that normal service units pull in basic system initialization, and are terminated cleanly prior to system shutdown. Only services involved with early boot or late system shutdown should disable this option. If a service is requested under a certain name but no unit configuration file is found, systemd looks for a SysV init script by the same name (with the .service suffix removed) and dynamically creates a service unit from that script. This is useful for compatibility with SysV. Service files must include a [Service] section, which carries information about the service and the process it supervises. A number of options that may be used in this section are shared with other unit types. These options are documented in systemd.exec5. The options specific to the [Service] section of service units are the following: Type= Configures the process start-up type for this service unit. One of simple, forking, finish, dbus, notify. If set to simple (the default value) it is expected that the process configured with ExecStart= is the main process of the service. In this mode, communication channels must be installed before the daemon is started up (e.g. sockets set up by systemd, via socket activation), as systemd will immediately proceed starting follow-up units. If set to forking it is expected that the process configured with ExecStart= will start up and call fork(). The parent process is expected to finish when start-up is complete and all communication channels set up. The child continues to run as the main daemon process. This is the behaviour of traditional UNIX daemons. If this setting is used, it is recommended to also use the PIDFile= option, so that systemd can identify the main process of the daemon. systemd will proceed starting follow-up units as soon as the parent process exits. Behaviour of finish is similar to simple, however it is expected that the process has to exit before systemd starts follow-up units. ValidNoProcess= is particularly useful for this type of service. Behaviour of dbus is similar to simple, however it is expected that the daemon acquires a name on the D-Bus bus, as configured by BusName=. systemd will proceed starting follow-up units after the D-Bus bus name has been acquired. Service units with this option configured implicitly have dependencies on the dbus.target unit. Behaviour of notify is similar to simple, however it is expected that the daemon sends a notification message via sd_notify3 or an equivalent call when it finished starting up. systemd will proceed starting follow-up units after this notification message has been sent. If this option is used NotifyAccess= (see below) must be set to open access to the notification socket provided by systemd. If NotifyAccess= is not set, it will be implicitly set to main. ValidNoProcess= Takes a boolean value that specifies whether the service shall be considered active even when all its processes exited. Defaults to no. PIDFile= Takes an absolute file name pointing to the PID file of this daemon. Use of this option is recommended for services where Type= is set to forking. BusName= Takes a D-Bus bus name, where this service is reachable as. This option is mandatory for services where Type= is set to dbus, but its use is otherwise recommended as well if the process takes a name on the D-Bus bus. ExecStart= Takes a command line that is executed when this service shall be started up. The first token of the command line must be an absolute file name, then followed by arguments for the process. It is mandatory to set this option for all services. This option may not be specified more than once. Optionally, if the absolute file name is prefixed with @, the second token will be passed as argv[0] to the executed process, followed by the further arguments specified. Unless Type=forking is set, the process started via this command line will be considered the main process of the daemon. ExecStartPre= ExecStartPost= Additional commands that are executed before (resp. after) the command in ExecStart=. If specified more than once, all commands are executed one after the other, serially. Use of these settings is optional. ExecReload= Commands to execute to trigger a configuration reload in the service. If used more than once, all commands are executed one after the other, serially. Use of this setting is optional. ExecStop= Commands to execute to stop the service started via ExecStart=. If used more than once, all commands are executed one after the other, serially. Use of this setting is optional. All processes remaining for a service after the commands configured in this option are run are terminated according to the KillMode= setting (see below). If this option is not specified the process is terminated right-away when service stop is requested. ExecStopPost= Additional commands that are executed after the service was stopped using the commands configured in ExecStop=. If specified more than once, all commands are executed one after the other, serially. Use of these settings is optional. RestartSec= Configures the time to sleep before restarting a service (as configured with Restart=). Takes a unit-less value in seconds, or a time span value such as "5min 20s". Defaults to 100ms. TimeoutSec= Configures the time to wait for start-up and stop. If a daemon service does not signal start-up completion within the configured time the service will be considered failed and be shut down again. If a service is asked to stop but does not terminate in the specified time it will be terminated forcibly via SIGTERM, and after another delay of this time with SIGKILL. (See KillMode= below.) Takes a unit-less value in seconds, or a time span value such as "5min 20s". Pass 0 to disable the timeout logic. Defaults to 60s. Restart= Configures whether the main service process shall be restarted when it exists. Takes one of once, restart-on-success or restart-always. If set to once (the default) the service will not be restarted when it exits. If set to restart-on-success it will be restarted only when it exited cleanly, i.e. terminated with an exit code of 0. If set to restart-always the service will be restarted regardless whether it exited cleanly or not, or got terminated abnormally by a signal. PermissionsStartOnly= Takes a boolean argument. If true, the permission related execution options as configured with User= and similar options (see systemd.exec5 for more information) are only applied to the process started with ExecStart=, and not to the various other ExecStartPre=, ExecStartPost=, ExecReload=, ExecStop=, ExecStopPost= commands. If false, the setting is applied to all configured commands the same way. Defaults to false. RootDirectoryStartOnly= Takes a boolean argument. If true, the root directory as configured with the RootDirectory= option (see systemd.exec5 for more information) is only applied to the process started with ExecStart=, and not to the various other ExecStartPre=, ExecStartPost=, ExecReload=, ExecStop=, ExecStopPost= commands. If false, the setting is applied to all configured commands the same way. Defaults to false. SysVStartPriority= Set the SysV start priority to use to order this service in relation to SysV services lacking LSB headers. This option is only necessary to fix ordering in relation to legacy SysV services, that have no ordering information encoded in the script headers. As such it should only be used as temporary compatibility option, and not be used in new unit files. Almost always it is a better choice to add explicit ordering directives via After= or Before=, instead. For more details see systemd.unit5. If used, pass an integer value in the range 0-99. KillMode= Specifies how processes of this service shall be killed. One of control-group, process-group, process, none. If set to control-group all remaining processes in the control group of this service will be terminated on service stop, after the stop command (as configured with ExecStop=) is executed. If set to process-group only the members of the process group of the main service process are killed. If set to process only the main process itself is killed. If set to none no process is killed. In this case only the stop command will be executed on service stop, but no process be killed otherwise. Processes remaining alive after stop are left in their control group and the control group continues to exist after stop unless it is empty. Defaults to control-croup. Processes will first be terminated via SIGTERM. If then after a delay (configured via the TimeoutSec= option) processes still remain, the termination request is repeated with the SIGKILL signal. See kill2 for more information. NonBlocking= Set O_NONBLOCK flag for all file descriptors passed via socket-based activation. If true, all file descriptors >= 3 (i.e. all except STDIN/STDOUT/STDERR) will have the O_NONBLOCK flag set and hence are in non-blocking mode. This option is only useful in conjunction with a socket unit, as described in systemd.socket5. Defaults to false. NotifyAccess= Controls access to the service status notification socket, as accessible via the sd_notify3 call. Takes one of none (the default), main or all. If none no daemon status updates are accepted by the service processes, all status update messages are ignored. If main only service updates sent from the main process of the service are accepted. If all all services updates from all members of the service's control group are accepted. This option must be set to open access to the notification socket when using Type=notify (see above). systemd1, systemctl8, systemd.unit5, systemd.exec5