<?xml version='1.0'?> <!--*-nxml-*-->
<?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
        "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">

<!--
  This file is part of systemd.

  Copyright 2010 Lennart Poettering

  systemd is free software; you can redistribute it and/or modify it
  under the terms of the GNU Lesser General Public License as published by
  the Free Software Foundation; either version 2.1 of the License, or
  (at your option) any later version.

  systemd is distributed in the hope that it will be useful, but
  WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public License
  along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->

<refentry id="systemd.service">
        <refentryinfo>
                <title>systemd.service</title>
                <productname>systemd</productname>

                <authorgroup>
                        <author>
                                <contrib>Developer</contrib>
                                <firstname>Lennart</firstname>
                                <surname>Poettering</surname>
                                <email>lennart@poettering.net</email>
                        </author>
                </authorgroup>
        </refentryinfo>

        <refmeta>
                <refentrytitle>systemd.service</refentrytitle>
                <manvolnum>5</manvolnum>
        </refmeta>

        <refnamediv>
                <refname>systemd.service</refname>
                <refpurpose>Service unit configuration</refpurpose>
        </refnamediv>

        <refsynopsisdiv>
                <para><filename><replaceable>service</replaceable>.service</filename></para>
        </refsynopsisdiv>

        <refsect1>
                <title>Description</title>

                <para>A unit configuration file whose name ends in
                <filename>.service</filename> encodes information
                about a process controlled and supervised by
                systemd.</para>

                <para>This man page lists the configuration options
                specific to this unit type. See
                <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                for the common options of all unit configuration
                files. The common configuration items are configured
                in the generic <literal>[Unit]</literal> and
                <literal>[Install]</literal> sections. The service
                specific configuration options are configured in the
                <literal>[Service]</literal> section.</para>

                <para>Additional options are listed in
                <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
                which define the execution environment the commands
                are executed in, and in
                <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
                which define the way the processes of the service are
                terminated, and in
                <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
                which configure resource control settings for the
                processes of the service.</para>

                <para>Unless <varname>DefaultDependencies=</varname>
                is set to <option>false</option>, service units will
                implicitly have dependencies of type
                <varname>Requires=</varname> and
                <varname>After=</varname> on
                <filename>basic.target</filename> as well as
                dependencies of type <varname>Conflicts=</varname> and
                <varname>Before=</varname> on
                <filename>shutdown.target</filename>. These ensure
                that normal service units pull in basic system
                initialization, and are terminated cleanly prior to
                system shutdown. Only services involved with early
                boot or late system shutdown should disable this
                option.</para>

                <para>If a service is requested under a certain name
                but no unit configuration file is found, systemd looks
                for a SysV init script by the same name (with the
                <filename>.service</filename> suffix removed) and
                dynamically creates a service unit from that
                script. This is useful for compatibility with
                SysV. Note that this compatibility is quite
                comprehensive but not 100%. For details about the
                incompatibilities, see the <ulink
                url="http://www.freedesktop.org/wiki/Software/systemd/Incompatibilities">Incompatibilities
                with SysV</ulink> document.
                </para>
        </refsect1>

        <refsect1>
                <title>Options</title>

                <para>Service files must include a
                <literal>[Service]</literal> section, which carries
                information about the service and the process it
                supervises. A number of options that may be used in
                this section are shared with other unit types. These
                options are documented in
                <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                and
                <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. The
                options specific to the <literal>[Service]</literal>
                section of service units are the following:</para>

                <variablelist class='unit-directives'>
                        <varlistentry>
                                <term><varname>Type=</varname></term>

                                <listitem><para>Configures the process
                                start-up type for this service
                                unit. One of <option>simple</option>,
                                <option>forking</option>,
                                <option>oneshot</option>,
                                <option>dbus</option>,
                                <option>notify</option> or
                                <option>idle</option>.</para>

                                <para>If set to
                                <option>simple</option> (the default
                                if neither
                                <varname>Type=</varname> nor
                                <varname>BusName=</varname>, but
                                <varname>ExecStart=</varname> are
                                specified), it is expected that the
                                process configured with
                                <varname>ExecStart=</varname> is the
                                main process of the service. In this
                                mode, if the process offers
                                functionality to other processes on
                                the system, its communication channels
                                should be installed before the daemon
                                is started up (e.g. sockets set up by
                                systemd, via socket activation), as
                                systemd will immediately proceed
                                starting follow-up units.</para>

                                <para>If set to
                                <option>forking</option>, it is
                                expected that the process configured
                                with <varname>ExecStart=</varname>
                                will call <function>fork()</function>
                                as part of its start-up. The parent process is
                                expected to exit when start-up is
                                complete and all communication
                                channels are set up. The child continues
                                to run as the main daemon
                                process. This is the behavior of
                                traditional UNIX daemons. If this
                                setting is used, it is recommended to
                                also use the
                                <varname>PIDFile=</varname> option, so
                                that systemd can identify the main
                                process of the daemon. systemd will
                                proceed with starting follow-up units
                                as soon as the parent process
                                exits.</para>

                                <para>Behavior of
                                <option>oneshot</option> is similar to
                                <option>simple</option>; however, it
                                is expected that the process has to
                                exit before systemd starts follow-up
                                units. <varname>RemainAfterExit=</varname>
                                is particularly useful for this type
                                of service. This is the implied
                                default if neither
                                <varname>Type=</varname> or
                                <varname>ExecStart=</varname> are
                                specified.</para>

                                <para>Behavior of
                                <option>dbus</option> is similar to
                                <option>simple</option>; however, it is
                                expected that the daemon acquires a
                                name on the D-Bus bus, as configured
                                by
                                <varname>BusName=</varname>. systemd
                                will proceed with starting follow-up
                                units after the D-Bus bus name has been
                                acquired. Service units with this
                                option configured implicitly gain
                                dependencies on the
                                <filename>dbus.socket</filename>
                                unit. This type is the default if
                                <varname>BusName=</varname> is
                                specified.</para>

                                <para>Behavior of
                                <option>notify</option> is similar to
                                <option>simple</option>; however, it is
                                expected that the daemon sends a
                                notification message via
                                <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>
                                or an equivalent call when it has finished
                                starting up. systemd will proceed with
                                starting follow-up units after this
                                notification message has been sent. If
                                this option is used,
                                <varname>NotifyAccess=</varname> (see
                                below) should be set to open access to
                                the notification socket provided by
                                systemd. If
                                <varname>NotifyAccess=</varname> is
                                not set, it will be implicitly set to
                                <option>main</option>. Note that
                                currently
                                <varname>Type=</varname><option>notify</option>
                                will not work if used in combination with
                                <varname>PrivateNetwork=</varname><option>yes</option>.</para>

                                <para>Behavior of
                                <option>idle</option> is very similar
                                to <option>simple</option>; however,
                                actual execution of the service
                                binary is delayed until all jobs are
                                dispatched. This may be used to avoid
                                interleaving of output of shell
                                services with the status output on the
                                console.</para>
                                </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>RemainAfterExit=</varname></term>

                                <listitem><para>Takes a boolean value
                                that specifies whether the service
                                shall be considered active even when
                                all its processes exited. Defaults to
                                <option>no</option>.</para>
                                </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>GuessMainPID=</varname></term>

                                <listitem><para>Takes a boolean value
                                that specifies whether systemd should
                                try to guess the main PID of a service
                                if it cannot be determined
                                reliably. This option is ignored
                                unless <option>Type=forking</option>
                                is set and <option>PIDFile=</option>
                                is unset because for the other types
                                or with an explicitly configured PID
                                file, the main PID is always known. The
                                guessing algorithm might come to
                                incorrect conclusions if a daemon
                                consists of more than one process. If
                                the main PID cannot be determined,
                                failure detection and automatic
                                restarting of a service will not work
                                reliably. Defaults to
                                <option>yes</option>.</para>
                                </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>PIDFile=</varname></term>

                                <listitem><para>Takes an absolute file
                                name pointing to the PID file of this
                                daemon. Use of this option is
                                recommended for services where
                                <varname>Type=</varname> is set to
                                <option>forking</option>. systemd will
                                read the PID of the main process of
                                the daemon after start-up of the
                                service. systemd will not write to the
                                file configured here.</para>
                                </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>BusName=</varname></term>

                                <listitem><para>Takes a D-Bus bus
                                name that this service is reachable
                                as. This option is mandatory for
                                services where
                                <varname>Type=</varname> is set to
                                <option>dbus</option>.</para>
                                </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>BusPolicy=</varname></term>

                                <listitem><para>If specified, a custom
                                <ulink url="https://code.google.com/p/d-bus/">kdbus</ulink>
                                endpoint will be created and installed as the
                                default bus node for the service. Such a custom
                                endpoint can hold an own set of policy rules
                                that are enforced on top of the bus-wide ones.
                                The custom endpoint is named after the service
                                it was created for, and its node will be
                                bind-mounted over the default bus node
                                location, so the service can only access the
                                bus through its own endpoint. Note that custom
                                bus endpoints default to a 'deny all' policy.
                                Hence, if at least one
                                <varname>BusPolicy=</varname> directive is
                                given, you have to make sure to add explicit
                                rules for everything the service should be able
                                to do.</para>
                                <para>The value of this directive is comprised
                                of two parts; the bus name, and a verb to
                                specify to granted access, which is one of
                                <option>see</option>,
                                <option>talk</option>, or
                                <option>own</option>.
                                <option>talk</option> implies
                                <option>see</option>, and <option>own</option>
                                implies both <option>talk</option> and
                                <option>see</option>.
                                If multiple access levels are specified for the
                                same bus name, the most powerful one takes
                                effect.
                                </para>
                                <para>Examples:</para>
                                <programlisting>BusPolicy=org.freedesktop.systemd1 talk</programlisting>
                                <programlisting>BusPolicy=org.foo.bar see</programlisting>
                                <para>This option is only available on kdbus enabled systems.</para>
                                </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>ExecStart=</varname></term>
                                <listitem><para>Commands with their
                                arguments that are executed when this
                                service is started. The value is split
                                into zero or more command lines is
                                according to the rules described below
                                (see section "Command Lines" below).
                                </para>

                                <para>When <varname>Type</varname> is
                                not <option>oneshot</option>, only one
                                command may and must be given. When
                                <varname>Type=oneshot</varname> is
                                used, zero or more commands may be
                                specified. This can be specified by
                                providing multiple command lines in
                                the same directive, or alternatively,
                                this directive may be specified more
                                than once with the same effect. If the
                                empty string is assigned to this
                                option, the list of commands to start
                                is reset, prior assignments of this
                                option will have no effect. If no
                                <varname>ExecStart=</varname> is
                                specified, then the service must have
                                <varname>RemainAfterExit=yes</varname>
                                set.</para>

                                <para>For each of the specified
                                commands, the first argument must be
                                an absolute path to an executable.
                                Optionally, if this file name is
                                prefixed with <literal>@</literal>,
                                the second token will be passed as
                                <literal>argv[0]</literal> to the
                                executed process, followed by the
                                further arguments specified. If the
                                absolute filename is prefixed with
                                <literal>-</literal>, an exit code of
                                the command normally considered a
                                failure (i.e. non-zero exit status or
                                abnormal exit due to signal) is
                                ignored and considered success. If
                                both <literal>-</literal> and
                                <literal>@</literal> are used, they
                                can appear in either order.</para>

                                <para>If more than one command is
                                specified, the commands are invoked
                                sequentially in the order they appear
                                in the unit file. If one of the
                                commands fails (and is not prefixed
                                with <literal>-</literal>), other
                                lines are not executed, and the unit
                                is considered failed.</para>

                                <para>Unless
                                <varname>Type=forking</varname> is
                                set, the process started via this
                                command line will be considered the
                                main process of the daemon.</para>

                              </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>ExecStartPre=</varname></term>
                                <term><varname>ExecStartPost=</varname></term>
                                <listitem><para>Additional commands
                                that are executed before or after
                                the command in
                                <varname>ExecStart=</varname>, respectively.
                                Syntax is the same as for
                                <varname>ExecStart=</varname>, except
                                that multiple command lines are allowed
                                and the commands are executed one
                                after the other, serially.</para>

                                <para>If any of those commands (not
                                prefixed with <literal>-</literal>)
                                fail, the rest are not executed and
                                the unit is considered failed.</para>
                                </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>ExecReload=</varname></term>
                                <listitem><para>Commands to execute to
                                trigger a configuration reload in the
                                service. This argument takes multiple
                                command lines, following the same
                                scheme as described for
                                <varname>ExecStart=</varname>
                                above. Use of this setting is
                                optional. Specifier and environment
                                variable substitution is supported
                                here following the same scheme as for
                                <varname>ExecStart=</varname>.</para>

                                <para>One additional, special
                                environment variable is set: if known,
                                <varname>$MAINPID</varname> is set to
                                the main process of the daemon, and
                                may be used for command lines like the
                                following:</para>

                                <programlisting>/bin/kill -HUP $MAINPID</programlisting>

                                <para>Note however that reloading a
                                daemon by sending a signal (as with
                                the example line above) is usually not
                                a good choice, because this is an
                                asynchronous operation and hence not
                                suitable to order reloads of multiple
                                services against each other. It is
                                strongly recommended to set
                                <varname>ExecReload=</varname> to a
                                command that not only triggers a
                                configuration reload of the daemon,
                                but also synchronously waits for it to
                                complete.</para>
                                </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>ExecStop=</varname></term>
                                <listitem><para>Commands to execute to
                                stop the service started via
                                <varname>ExecStart=</varname>. This
                                argument takes multiple command lines,
                                following the same scheme as described
                                for <varname>ExecStart=</varname>
                                above. Use of this setting is
                                optional. After the commands configured
                                in this option are run, all processes
                                remaining for a service are
                                terminated according to the
                                <varname>KillMode=</varname> setting
                                (see
                                <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>). If
                                this option is not specified, the
                                process is terminated immediately when
                                service stop is requested. Specifier
                                and environment variable substitution
                                is supported (including
                                <varname>$MAINPID</varname>, see
                                above).</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>ExecStopPost=</varname></term>
                                <listitem><para>Additional commands
                                that are executed after the service
                                was stopped. This includes cases where
                                the commands configured in
                                <varname>ExecStop=</varname> were used,
                                where the service does not have any
                                <varname>ExecStop=</varname> defined, or
                                where the service exited unexpectedly. This
                                argument takes multiple command lines,
                                following the same scheme as described
                                for <varname>ExecStart</varname>. Use
                                of these settings is
                                optional. Specifier and environment
                                variable substitution is
                                supported.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>RestartSec=</varname></term>
                                <listitem><para>Configures the time to
                                sleep before restarting a service (as
                                configured with
                                <varname>Restart=</varname>). Takes a
                                unit-less value in seconds, or a time
                                span value such as "5min
                                20s". Defaults to
                                100ms.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>TimeoutStartSec=</varname></term>
                                <listitem><para>Configures the time to
                                wait for start-up. If a
                                daemon service does not signal
                                start-up completion within the
                                configured time, the service will be
                                considered failed and will be shut
                                down again.
                                Takes a unit-less value in seconds, or a
                                time span value such as "5min
                                20s". Pass <literal>0</literal> to
                                disable the timeout logic. Defaults to
                                <varname>DefaultTimeoutStartSec=</varname> from
                                the manager configuration file, except
                                when <varname>Type=oneshot</varname> is
                                used, in which case the timeout
                                is disabled by default
                                (see <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
                                </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>TimeoutStopSec=</varname></term>
                                <listitem><para>Configures the time to
                                wait for stop. If a service is asked
                                to stop, but does not terminate in the
                                specified time, it will be terminated
                                forcibly via <constant>SIGTERM</constant>,
                                and after another timeout of equal duration
                                with <constant>SIGKILL</constant> (see
                                <varname>KillMode=</varname>
                                in <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
                                Takes a unit-less value in seconds, or a
                                time span value such as "5min
                                20s". Pass <literal>0</literal> to disable
                                the timeout logic. Defaults to
                                <varname>DefaultTimeoutStopSec=</varname> from the
                                manager configuration file
                                (see <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
                                </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>TimeoutSec=</varname></term>
                                <listitem><para>A shorthand for configuring
                                both <varname>TimeoutStartSec=</varname>
                                and <varname>TimeoutStopSec=</varname>
                                to the specified value.
                                </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>WatchdogSec=</varname></term>
                                <listitem><para>Configures the
                                watchdog timeout for a service. The
                                watchdog is activated when the start-up is
                                completed. The service must call
                                <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>
                                regularly with <literal>WATCHDOG=1</literal>
                                (i.e. the "keep-alive ping"). If the time
                                between two such calls is larger than
                                the configured time, then the service
                                is placed in a failed state and it will
                                be terminated with <varname>SIGABRT</varname>.
                                By setting <varname>Restart=</varname> to
                                <option>on-failure</option> or
                                <option>always</option>, the service
                                will be automatically restarted. The
                                time configured here will be passed to
                                the executed service process in the
                                <varname>WATCHDOG_USEC=</varname>
                                environment variable. This allows
                                daemons to automatically enable the
                                keep-alive pinging logic if watchdog
                                support is enabled for the service. If
                                this option is used,
                                <varname>NotifyAccess=</varname> (see
                                below) should be set to open access to
                                the notification socket provided by
                                systemd. If
                                <varname>NotifyAccess=</varname> is
                                not set, it will be implicitly set to
                                <option>main</option>. Defaults to 0,
                                which disables this
                                feature.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>Restart=</varname></term>
                                <listitem><para>Configures whether the
                                service shall be restarted when the
                                service process exits, is killed,
                                or a timeout is reached. The service
                                process may be the main service
                                process, but it may also be one of the
                                processes specified with
                                <varname>ExecStartPre=</varname>,
                                <varname>ExecStartPost=</varname>,
                                <varname>ExecStop=</varname>,
                                <varname>ExecStopPost=</varname>, or
                                <varname>ExecReload=</varname>.
                                When the death of the process is a
                                result of systemd operation (e.g. service
                                stop or restart), the service will not be
                                restarted. Timeouts include missing
                                the watchdog "keep-alive ping"
                                deadline and a service start, reload,
                                and stop operation timeouts.</para>

                                <para>Takes one of
                                <option>no</option>,
                                <option>on-success</option>,
                                <option>on-failure</option>,
                                <option>on-abnormal</option>,
                                <option>on-watchdog</option>,
                                <option>on-abort</option>, or
                                <option>always</option>. If set to
                                <option>no</option> (the default), the
                                service will not be restarted. If set
                                to <option>on-success</option>, it
                                will be restarted only when the
                                service process exits cleanly.  In
                                this context, a clean exit means an
                                exit code of 0, or one of the signals
                                <constant>SIGHUP</constant>,
                                <constant>SIGINT</constant>,
                                <constant>SIGTERM</constant> or
                                <constant>SIGPIPE</constant>, and
                                additionally, exit statuses and
                                signals specified in
                                <varname>SuccessExitStatus=</varname>.
                                If set to <option>on-failure</option>,
                                the service will be restarted when the
                                process exits with a non-zero exit
                                code, is terminated by a signal
                                (including on core dump, but excluding
                                the aforementiond four signals), when
                                an operation (such as service reload)
                                times out, and when the configured
                                watchdog timeout is triggered.  If set
                                to <option>on-abnormal</option>, the
                                service will be restarted when the
                                process is terminated by a signal
                                (including on core dump, excluding the
                                aforementioned four signals), when an
                                operation times out, or when the
                                watchdog timeout is triggered. If set
                                to <option>on-abort</option>, the
                                service will be restarted only if the
                                service process exits due to an
                                uncaught signal not specified as a
                                clean exit status.  If set to
                                <option>on-watchdog</option>, the
                                service will be restarted only if the
                                watchdog timeout for the service
                                expires.  If set to
                                <option>always</option>, the service
                                will be restarted regardless of
                                whether it exited cleanly or not, got
                                terminated abnormally by a signal, or
                                hit a timeout.</para>

                                <table>
                                        <title>Exit causes and the effect of the <varname>Restart=</varname> settings on them</title>

                                        <tgroup cols='2'>
                                                <colspec colname='path' />
                                                <colspec colname='expl' />
                                                <thead>
                                                        <row>
                                                                <entry>Restart settings/Exit causes</entry>
                                                                <entry><option>no</option></entry>
                                                                <entry><option>always</option></entry>
                                                                <entry><option>on-success</option></entry>
                                                                <entry><option>on-failure</option></entry>
                                                                <entry><option>on-abnormal</option></entry>
                                                                <entry><option>on-abort</option></entry>
                                                                <entry><option>on-watchdog</option></entry>
                                                        </row>
                                                </thead>
                                                <tbody>
                                                        <row>
                                                                <entry>Clean exit code or signal</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                                <entry>X</entry>
                                                                <entry/>
                                                                <entry/>
                                                                <entry/>
                                                                <entry/>
                                                        </row>
                                                        <row>
                                                                <entry>Unclean exit code</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                                <entry/>
                                                                <entry/>
                                                                <entry/>
                                                        </row>
                                                        <row>
                                                                <entry>Unclean signal</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                                <entry>X</entry>
                                                                <entry>X</entry>
                                                                <entry/>
                                                        </row>
                                                        <row>
                                                                <entry>Timeout</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                                <entry>X</entry>
                                                                <entry/>
                                                                <entry/>
                                                        </row>
                                                        <row>
                                                                <entry>Watchdog</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                                <entry>X</entry>
                                                                <entry/>
                                                                <entry>X</entry>
                                                        </row>
                                                </tbody>
                                        </tgroup>
                                </table>

                                <para>As exceptions to the setting
                                above the service will not be
                                restarted if the exit code or signal
                                is specified in
                                <varname>RestartPreventExitStatus=</varname>
                                (see below). Also, the services will
                                always be restarted if the exit code
                                or signal is specified in
                                <varname>RestartForceExitStatus=</varname>
                                (see below).</para>

                                <para>Setting this to
                                <option>on-failure</option> is the
                                recommended choice for long-running
                                services, in order to increase
                                reliability by attempting automatic
                                recovery from errors. For services
                                that shall be able to terminate on
                                their own choice (and avoid
                                immediate restarting),
                                <option>on-abnormal</option> is an
                                alternative choice.</para>
                                </listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>SuccessExitStatus=</varname></term>
                                <listitem><para>Takes a list of exit
                                status definitions that when returned
                                by the main service process will be
                                considered successful termination, in
                                addition to the normal successful exit
                                code 0 and the signals <constant>SIGHUP</constant>, <constant>SIGINT</constant>,
                                <constant>SIGTERM</constant>, and <constant>SIGPIPE</constant>. Exit status
                                definitions can either be numeric exit
                                codes or termination signal names,
                                separated by spaces. For example:
                                <programlisting>SuccessExitStatus=1 2 8 SIGKILL</programlisting>
                                ensures that exit codes 1, 2, 8 and
                                the termination signal
                                <constant>SIGKILL</constant> are
                                considered clean service terminations.
                                </para>

                                <para>Note that if a process has a
                                signal handler installed and exits by
                                calling
                                <citerefentry><refentrytitle>_exit</refentrytitle><manvolnum>2</manvolnum></citerefentry>
                                in response to a signal, the
                                information about the signal is lost.
                                Programs should instead perform cleanup and kill themselves with the same signal instead. See
                                <ulink url="http://www.cons.org/cracauer/sigint.html">Proper handling of SIGINT/SIGQUIT — How to be a proper program</ulink>.</para>

                                <para>This option may appear more than once,
                                in which case the list of successful
                                exit statuses is merged. If the empty
                                string is assigned to this option, the
                                list is reset, all prior assignments
                                of this option will have no
                                effect.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>RestartPreventExitStatus=</varname></term>
                                <listitem><para>Takes a list of exit
                                status definitions that when returned
                                by the main service process will
                                prevent automatic service restarts,
                                regardless of the restart setting
                                configured with
                                <varname>Restart=</varname>. Exit
                                status definitions can either be
                                numeric exit codes or termination
                                signal names, and are separated by
                                spaces. Defaults to the empty list, so
                                that, by default, no exit status is
                                excluded from the configured restart
                                logic. For example:
                                <programlisting>RestartPreventExitStatus=1 6 SIGABRT</programlisting> ensures that exit
                                codes 1 and 6 and the termination
                                signal <constant>SIGABRT</constant> will
                                not result in automatic service
                                restarting. This
                                option may appear more than once, in
                                which case the list of restart-preventing
                                statuses is merged. If the empty
                                string is assigned to this option, the
                                list is reset and all prior assignments
                                of this option will have no
                                effect.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>RestartForceExitStatus=</varname></term>
                                <listitem><para>Takes a list of exit
                                status definitions that when returned
                                by the main service process will force
                                automatic service restarts, regardless
                                of the restart setting configured with
                                <varname>Restart=</varname>. The
                                argument format is similar to
                                <varname>RestartPreventExitStatus=</varname>.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>PermissionsStartOnly=</varname></term>
                                <listitem><para>Takes a boolean
                                argument. If true, the permission-related
                                execution options, as
                                configured with
                                <varname>User=</varname> and similar
                                options (see
                                <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                                for more information), are only applied
                                to the process started with
                                <varname>ExecStart=</varname>, and not
                                to the various other
                                <varname>ExecStartPre=</varname>,
                                <varname>ExecStartPost=</varname>,
                                <varname>ExecReload=</varname>,
                                <varname>ExecStop=</varname>, and
                                <varname>ExecStopPost=</varname>
                                commands. If false, the setting is
                                applied to all configured commands the
                                same way. Defaults to
                                false.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>RootDirectoryStartOnly=</varname></term>
                                <listitem><para>Takes a boolean
                                argument. If true, the root directory,
                                as configured with the
                                <varname>RootDirectory=</varname>
                                option (see
                                <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                                for more information), is only applied
                                to the process started with
                                <varname>ExecStart=</varname>, and not
                                to the various other
                                <varname>ExecStartPre=</varname>,
                                <varname>ExecStartPost=</varname>,
                                <varname>ExecReload=</varname>,
                                <varname>ExecStop=</varname>, and
                                <varname>ExecStopPost=</varname>
                                commands. If false, the setting is
                                applied to all configured commands the
                                same way. Defaults to
                                false.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>NonBlocking=</varname></term>
                                <listitem><para>Set the
                                <constant>O_NONBLOCK</constant> flag
                                for all file descriptors passed via
                                socket-based activation. If true, all
                                file descriptors >= 3 (i.e. all except
                                stdin, stdout, and stderr) will have
                                the <constant>O_NONBLOCK</constant> flag
                                set and hence are in
                                non-blocking mode. This option is only
                                useful in conjunction with a socket
                                unit, as described in
                                <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Defaults
                                to false.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>NotifyAccess=</varname></term>
                                <listitem><para>Controls access to the
                                service status notification socket, as
                                accessible via the
                                <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>
                                call. Takes one of
                                <option>none</option> (the default),
                                <option>main</option> or
                                <option>all</option>. If
                                <option>none</option>, no daemon status
                                updates are accepted from the service
                                processes, all status update messages
                                are ignored. If <option>main</option>,
                                only service updates sent from the
                                main process of the service are
                                accepted. If <option>all</option>, all
                                services updates from all members of
                                the service's control group are
                                accepted. This option should be set to
                                open access to the notification socket
                                when using
                                <varname>Type=notify</varname> or
                                <varname>WatchdogSec=</varname> (see
                                above). If those options are used but
                                <varname>NotifyAccess=</varname> is not
                                configured, it will be implicitly set
                                to
                                <option>main</option>.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>Sockets=</varname></term>
                                <listitem><para>Specifies the name of
                                the socket units this service shall
                                inherit socket file descriptors
                                from when the service is
                                started. Normally it should not be
                                necessary to use this setting as all
                                socket file descriptors whose unit
                                shares the same name as the service
                                (subject to the different unit name
                                suffix of course) are passed to the
                                spawned process.</para>

                                <para>Note that the same socket file
                                descriptors may be passed to multiple
                                processes simultaneously. Also note
                                that a different service may be
                                activated on incoming socket traffic
                                than the one which is ultimately
                                configured to inherit the socket file
                                descriptors. Or in other words: the
                                <varname>Service=</varname> setting of
                                <filename>.socket</filename> units
                                does not have to match the inverse of
                                the <varname>Sockets=</varname>
                                setting of the
                                <filename>.service</filename> it
                                refers to.</para>

                                <para>This option may appear more than
                                once, in which case the list of socket
                                units is merged. If the empty string
                                is assigned to this option, the list of
                                sockets is reset, and all prior uses of
                                this setting will have no
                                effect.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>StartLimitInterval=</varname></term>
                                <term><varname>StartLimitBurst=</varname></term>

                                <listitem><para>Configure service
                                start rate limiting. By default,
                                services which are started more
                                than 5 times within 10 seconds are not
                                permitted to start any more times
                                until the 10 second interval ends. With
                                these two options, this rate limiting
                                may be modified. Use
                                <varname>StartLimitInterval=</varname>
                                to configure the checking interval (defaults to
                                <varname>DefaultStartLimitInterval=</varname> in
                                manager configuration file, set to 0 to disable
                                any kind of rate limiting). Use
                                <varname>StartLimitBurst=</varname> to
                                configure how many starts per interval
                                are allowed (defaults to
                                <varname>DefaultStartLimitBurst=</varname> in
                                manager configuration file). These
                                configuration options are particularly
                                useful in conjunction with
                                <varname>Restart=</varname>; however,
                                they apply to all kinds of starts
                                (including manual), not just those
                                triggered by the
                                <varname>Restart=</varname> logic.
                                Note that units which are configured
                                for <varname>Restart=</varname> and
                                which reach the start limit are not
                                attempted to be restarted anymore;
                                however, they may still be restarted
                                manually at a later point, from which
                                point on, the restart logic is again
                                activated. Note that
                                <command>systemctl
                                reset-failed</command> will cause the
                                restart rate counter for a service to
                                be flushed, which is useful if the
                                administrator wants to manually start
                                a service and the start limit
                                interferes with
                                that.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>StartLimitAction=</varname></term>

                                <listitem><para>Configure the action
                                to take if the rate limit configured
                                with
                                <varname>StartLimitInterval=</varname>
                                and
                                <varname>StartLimitBurst=</varname> is
                                hit. Takes one of
                                <option>none</option>,
                                <option>reboot</option>,
                                <option>reboot-force</option>,
                                <option>reboot-immediate</option>,
                                <option>poweroff</option>,
                                <option>poweroff-force</option> or
                                <option>poweroff-immediate</option>. If
                                <option>none</option> is set, hitting
                                the rate limit will trigger no action
                                besides that the start will not be
                                permitted. <option>reboot</option>
                                causes a reboot following the normal
                                shutdown procedure (i.e. equivalent to
                                <command>systemctl reboot</command>).
                                <option>reboot-force</option> causes a
                                forced reboot which will terminate all
                                processes forcibly but should cause no
                                dirty file systems on reboot
                                (i.e. equivalent to <command>systemctl
                                reboot -f</command>) and
                                <option>reboot-immediate</option>
                                causes immediate execution of the
                                <citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry>
                                system call, which might result in
                                data loss. Similar,
                                <option>poweroff</option>,
                                <option>poweroff-force</option>,
                                <option>poweroff-immediate</option>
                                have the effect of powering down the
                                system with similar
                                semantics. Defaults to
                                <option>none</option>.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>FailureAction=</varname></term>
                                <listitem><para>Configure the action
                                to take when the service enters a failed
                                state. Takes the same values as
                                <varname>StartLimitAction=</varname>
                                and executes the same actions.
                                Defaults to <option>none</option>.
                                </para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>RebootArgument=</varname></term>
                                <listitem><para>Configure the optional
                                argument for the
                                <citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry>
                                system call if
                                <varname>StartLimitAction=</varname>
                                or <varname>FailureAction=</varname>
                                is a reboot action. This works just
                                like the optional argument to
                                <command>systemctl reboot</command>
                                command.</para></listitem>
                        </varlistentry>

                        <varlistentry>
                                <term><varname>FileDescriptorStoreMax=</varname></term>
                                <listitem><para>Configure how many
                                file descriptors may be stored in the
                                service manager for the service using
                                <citerefentry><refentrytitle>sd_pid_notify_with_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>'s
                                <literal>FDSTORE=1</literal>
                                messages. This is useful for
                                implementing service restart schemes
                                where the state is serialized to
                                <filename>/run</filename> and the file
                                descriptors passed to the service
                                manager, to allow restarts without
                                losing state. Defaults to 0, i.e. no
                                file descriptors may be stored in the
                                service manager by default. All file
                                descriptors passed to the service
                                manager from a specific service are
                                passed back to the service's main
                                process on the next service
                                restart. Any file descriptors passed
                                to the service manager are
                                automatically closed when POLLHUP or
                                POLLERR is seen on them, or when the
                                service is fully stopped and no job
                                queued or being executed for
                                it.</para></listitem>
                        </varlistentry>

                </variablelist>

                <para>Check
                <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                and
                <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                for more settings.</para>

        </refsect1>

        <refsect1>
                <title>Command lines</title>

                <para>This section describes command line parsing and
                variable and specifier substitions for
                <varname>ExecStart=</varname>,
                <varname>ExecStartPre=</varname>,
                <varname>ExecStartPost=</varname>,
                <varname>ExecReload=</varname>,
                <varname>ExecStop=</varname>, and
                <varname>ExecStopPost=</varname> options.</para>

                <para>Multiple command lines may be concatenated in a
                single directive by separating them with semicolons
                (these semicolons must be passed as separate words).
                Lone semicolons may be escaped as
                <literal>\;</literal>.</para>

                <para>Each command line is split on whitespace, with
                the first item being the command to execute, and the
                subsequent items being the arguments. Double quotes
                ("...") and single quotes ('...') may be used, in
                which case everything until the next matching quote
                becomes part of the same argument. C-style escapes are
                also supported, see table below. Quotes themselves are
                removed after parsing and escape sequences
                substituted. In addition, a trailing backslash
                (<literal>\</literal>) may be used to merge lines.
                </para>

                <para>This syntax is intended to be very similar to
                shell syntax, but only the meta-characters and
                expansions described in the following paragraphs are
                understood.  Specifically, redirection using
                <literal>&lt;</literal>, <literal>&lt;&lt;</literal>,
                <literal>&gt;</literal>, and
                <literal>&gt;&gt;</literal>, pipes using
                <literal>|</literal>, running programs in the
                background using <literal>&amp;</literal>, and
                <emphasis>other elements of shell syntax are not
                supported</emphasis>.</para>

                <para>The command to execute must an absolute path
                name. It may contain spaces, but control characters
                are not allowed.</para>

                <para>The command line accepts <literal>%</literal>
                specifiers as described in
                <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
                Note that the first argument of the command line
                (i.e. the program to execute) may not include
                specifiers.</para>

                <para>Basic environment variable substitution is
                supported. Use <literal>${FOO}</literal> as part of a
                word, or as a word of its own, on the command line, in
                which case it will be replaced by the value of the
                environment variable including all whitespace it
                contains, resulting in a single argument. Use
                <literal>$FOO</literal> as a separate word on the
                command line, in which case it will be replaced by the
                value of the environment variable split at whitespace
                resulting in zero or more arguments. For this type of
                expansion, quotes and respected when splitting into
                words, and afterwards removed.</para>

                <para>Example:</para>

                <programlisting>Environment="ONE=one" 'TWO=two two'
ExecStart=/bin/echo $ONE $TWO ${TWO}</programlisting>

                <para>This will execute <command>/bin/echo</command>
                with four arguments: <literal>one</literal>,
                <literal>two</literal>, <literal>two</literal>, and
                <literal>two two</literal>.</para>

                <para>Example:</para>
                <programlisting>Environment=ONE='one' "TWO='two two' too" THREE=
ExecStart=/bin/echo ${ONE} ${TWO} ${THREE}
ExecStart=/bin/echo $ONE $TWO $THREE</programlisting>
                <para>This results in <filename>echo</filename> being
                called twice, the first time with arguments
                <literal>'one'</literal>,
                <literal>'two two' too</literal>, <literal></literal>,
                and the second time with arguments
                <literal>one</literal>, <literal>two two</literal>,
                <literal>too</literal>.
                </para>

                <para>To pass a literal dollar sign, use
                <literal>$$</literal>. Variables whose value is not
                known at expansion time are treated as empty
                strings. Note that the first argument (i.e. the
                program to execute) may not be a variable.</para>

                <para>Variables to be used in this fashion may be
                defined through <varname>Environment=</varname> and
                <varname>EnvironmentFile=</varname>.  In addition,
                variables listed in the section "Environment variables
                in spawned processes" in
                <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
                which are considered "static configuration", may be
                used (this includes e.g. <varname>$USER</varname>, but
                not <varname>$TERM</varname>).</para>

                <para>Note that shell command lines are not directly
                supported. If shell command lines are to be used, they
                need to be passed explicitly to a shell implementation
                of some kind. Example:</para>
                <programlisting>ExecStart=/bin/sh -c 'dmesg | tac'</programlisting>

                <para>Example:</para>

                <programlisting>ExecStart=/bin/echo one ; /bin/echo "two two"</programlisting>

                <para>This will execute <command>/bin/echo</command>
                two times, each time with one argument:
                <literal>one</literal> and <literal>two two</literal>,
                respectively. Because two commands are specified,
                <varname>Type=oneshot</varname> must be used.</para>

                <para>Example:</para>

                <programlisting>ExecStart=/bin/echo / &gt;/dev/null &amp; \; \
/bin/ls</programlisting>

                <para>This will execute <command>/bin/echo</command>
                with five arguments: <literal>/</literal>,
                <literal>&gt;/dev/null</literal>,
                <literal>&amp;</literal>, <literal>;</literal>, and
                <literal>/bin/ls</literal>.</para>

                <table>
                        <title>C escapes supported in command lines and environment variables</title>
                        <tgroup cols='2'>
                                <colspec colname='escape' />
                                <colspec colname='meaning' />
                                <thead>
                                        <row>
                                                <entry>Literal</entry>
                                                <entry>Actual value</entry>
                                        </row>
                                </thead>
                                <tbody>
                                        <row>
                                                <entry><literal>\a</literal></entry>
                                                <entry>bell</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\b</literal></entry>
                                                <entry>backspace</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\f</literal></entry>
                                                <entry>form feed</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\n</literal></entry>
                                                <entry>newline</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\r</literal></entry>
                                                <entry>carriage return</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\t</literal></entry>
                                                <entry>tab</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\v</literal></entry>
                                                <entry>vertical tab</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\\</literal></entry>
                                                <entry>backslash</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\"</literal></entry>
                                                <entry>double quotation mark</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\'</literal></entry>
                                                <entry>single quotation mark</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\s</literal></entry>
                                                <entry>space</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\x<replaceable>xx</replaceable></literal></entry>
                                                <entry>character number <replaceable>xx</replaceable> in hexadecimal encoding</entry>
                                        </row>
                                        <row>
                                                <entry><literal>\<replaceable>nnn</replaceable></literal></entry>
                                                <entry>character number <replaceable>nnn</replaceable> in octal encoding</entry>
                                        </row>
                                </tbody>
                        </tgroup>
                </table>
        </refsect1>

        <refsect1>
                <title>Examples</title>

                <example>
                        <title>Simple service</title>

                        <para>The following unit file creates a service
                        that will execute
                        <filename>/usr/sbin/foo-daemon</filename>.
                        Since no <varname>Type=</varname> is specified,
                        the default
                        <varname>Type=</varname><option>simple</option>
                        will be assumed. systemd will assume the unit
                        to be started immediately after the program has
                        begun executing.</para>

                        <programlisting>[Unit]
Description=Foo

[Service]
ExecStart=/usr/sbin/foo-daemon

[Install]
WantedBy=multi-user.target</programlisting>

                        <para>Note that systemd assumes here that the
                        process started by systemd will continue
                        running until the service terminates. If the
                        program daemonizes itself (i.e. forks), please
                        use
                        <varname>Type=</varname><option>forking</option>
                        instead.</para>

                        <para>Since no <varname>ExecStop=</varname> was
                        specified, systemd will send SIGTERM to all
                        processes started from this service, and after
                        a timeout also SIGKILL. This behavior can be
                        modified, see
                        <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                        for details.</para>

                        <para>Note that this unit type does not include
                        any type of notification when a service has
                        completed initialization. For this, you should
                        use other unit types, such as
                        <varname>Type=</varname><option>notify</option>
                        if the service understands systemd's
                        notification protocol,
                        <varname>Type=</varname><option>forking</option>
                        if the service can background itself or
                        <varname>Type=</varname><option>dbus</option>
                        if the unit acquires a DBus name once
                        initialization is complete. See below.</para>
                </example>

                <example>
                        <title>Oneshot service</title>

                        <para>Sometimes units should just execute an
                        action without keeping active processes, such
                        as a filesystem check or a cleanup action on
                        boot. For this,
                        <varname>Type=</varname><option>oneshot</option>
                        exists. Units of this type will wait until the
                        process specified terminates and then fall back
                        to being inactive. The following unit will
                        perform a clenaup action:</para>

                        <programlisting>[Unit]
Description=Cleanup old Foo data

[Service]
Type=oneshot
ExecStart=/usr/sbin/foo-cleanup

[Install]
WantedBy=multi-user.target</programlisting>

                        <para>Note that systemd will consider the unit
                        to be in the state 'starting' until the program
                        has terminated, so ordered dependencies will
                        wait for the program to finish before starting
                        themselves. The unit will revert to the
                        'inactive' state after the execution is
                        done, never reaching the 'active' state. That
                        means another request to start the unit will
                        perform the action again.</para>

                        <para><varname>Type=</varname><option>oneshot</option>
                        are the only service units that may have more
                        than one <varname>ExecStart=</varname>
                        specified. They will be executed in order until
                        either they are all successful or one of them
                        fails.</para>
                </example>

                <example>
                        <title>Stoppable oneshot service</title>

                        <para>Similarly to the oneshot services, there
                        are sometimes units that need to execute a
                        program to set up something and then execute
                        another to shut it down, but no process remains
                        active while they are considered
                        'started'. Network configuration can sometimes
                        fall into this category. Another use case is if
                        a oneshot service shall not be executed a
                        each time when they are pulled in as a
                        dependency, but only the first time.</para>

                        <para>For this, systemd knows the setting
                        <varname>RemainAfterExit=</varname><option>yes</option>,
                        which causes systemd to consider the unit to be
                        active if the start action exited successfully.
                        This directive can be used with all types, but
                        is most useful with
                        <varname>Type=</varname><option>oneshot</option>
                        and
                        <varname>Type=</varname><option>simple</option>.
                        With
                        <varname>Type=</varname><option>oneshot</option>
                        systemd waits until the start action has
                        completed before it considers the unit to be
                        active, so dependencies start only after the
                        start action has succeeded. With
                        <varname>Type=</varname><option>simple</option>
                        dependencies will start immediately after the
                        start action has been dispatched. The following
                        unit provides an example for a simple static
                        firewall.</para>

                        <programlisting>[Unit]
Description=Simple firewall

[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/local/sbin/simple-firewall-start
ExecStop=/usr/local/sbin/simple-firewall-stop

[Install]
WantedBy=multi-user.target</programlisting>

                        <para>Since the unit is considered to be
                        running after the start action has exited,
                        invoking <command>systemctl start</command> on
                        that unit again will cause no action to be
                        taken.</para>
                </example>

                <example>
                        <title>Traditional forking services</title>

                        <para>Many traditional daemons/services
                        background (i.e. fork, daemonize) themselves
                        when starting. Set
                        <varname>Type=</varname><option>forking</option>
                        in the service's unit file to support this mode
                        of operation. systemd will consider the service
                        to be in the process of initialization while
                        the original program is still running. Once
                        it exits successfully and at least a process
                        remains (and
                        <varname>RemainAfterExit=</varname><option>no</option>),
                        the service is considered started.</para>

                        <para>Often a traditional daemon only consists
                        of one process. Therefore, if only one process
                        is left after the original process terminates,
                        systemd will consider that process the main
                        process of the service. In that case, the
                        <varname>$MAINPID</varname> variable will be
                        available in <varname>ExecReload=</varname>,
                        <varname>ExecStop=</varname>, etc.</para>

                        <para>In case more than one process remains,
                        systemd will be unable to determine the main
                        process, so it will not assume there is one.
                        In that case, <varname>$MAINPID</varname> will
                        not expand to anything. However, if the process
                        decides to write a traditional PID file,
                        systemd will be able to read the main PID from
                        there. Please set <varname>PIDFile=</varname>
                        accordingly. Note that the daemon should write
                        that file before finishing with its
                        initialization, otherwise systemd might try to
                        read the file before it exists.</para>

                        <para>The following example shows a simple
                        daemon that forks and just starts one process
                        in the background:</para>

                        <programlisting>[Unit]
Description=Some simple daemon

[Service]
Type=forking
ExecStart=/usr/sbin/my-simple-daemon -d

[Install]
WantedBy=multi-user.target</programlisting>

                        <para>Please see
                        <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                        for details on how you can influence the way
                        systemd terminates the service.</para>
                </example>

                <example>
                        <title>DBus services</title>

                        <para>For services that acquire a name on the
                        DBus system bus, use
                        <varname>Type=</varname><option>dbus</option>
                        and set <varname>BusName=</varname>
                        accordingly. The service should not fork
                        (daemonize). systemd will consider the service
                        to be initialized once the name has been
                        acquired on the system bus. The following
                        example shows a typical DBus service:</para>

                        <programlisting>[Unit]
Description=Simple DBus service

[Service]
Type=dbus
BusName=org.example.simple-dbus-service
ExecStart=/usr/sbin/simple-dbus-service

[Install]
WantedBy=multi-user.target</programlisting>

                        <para>For <emphasis>bus-activatable</emphasis>
                        services, don't include a
                        <literal>[Install]</literal> section in the
                        systemd service file, but use the
                        <varname>SystemdService=</varname> option in
                        the corresponding DBus service file, for
                        example
                        (<filename>/usr/share/dbus-1/system-services/org.example.simple-dbus-service.service</filename>):</para>

                        <programlisting>[D-BUS Service]
Name=org.example.simple-dbus-service
Exec=/usr/sbin/simple-dbus-service
User=root
SystemdService=simple-dbus-service.service</programlisting>

                        <para>Please see
                        <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                        for details on how you can influence the way
                        systemd terminates the service.</para>
                </example>

                <example>
                        <title>Services that notify systemd about their initialization</title>

                        <para><varname>Type=</varname><option>simple</option>
                        services are really easy to write, but have the
                        major disadvantage of systemd not being able to
                        tell when initialization of the given service
                        is complete. For this reason, systemd supports
                        a simple notification protocol that allows
                        daemons to make systemd aware that they are
                        done initializing. Use
                        <varname>Type=</varname><option>notify</option>
                        for this. A typical service file for such a
                        daemon would look like this:</para>

                        <programlisting>[Unit]
Description=Simple notifying service

[Service]
Type=notify
ExecStart=/usr/sbin/simple-notifying-service

[Install]
WantedBy=multi-user.target</programlisting>

                        <para>Note that the daemon has to support
                        systemd's notification protocol, else systemd
                        will think the service hasn't started yet and
                        kill it after a timeout. For an example of how
                        to update daemons to support this protocol
                        transparently, take a look at
                        <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
                        systemd will consider the unit to be in the
                        'starting' state until a readiness notification
                        has arrived.</para>

                        <para>Please see
                        <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
                        for details on how you can influence the way
                        systemd terminates the service.</para>
                </example>
        </refsect1>

        <refsect1>
                  <title>See Also</title>
                  <para>
                          <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
                          <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>
                  </para>
        </refsect1>

</refentry>