systemd Developer Lennart Poettering lennart@poettering.net systemd.special 7 systemd.special Special systemd units basic.target, bluetooth.target, ctrl-alt-del.target, cryptsetup.target, dbus.service, dbus.socket, default.target, display-manager.service, emergency.target, exit.target, final.target, getty.target, graphical.target, halt.target, hibernate.target, hybrid-sleep.target, initrd-fs.target, kbrequest.target, kexec.target, local-fs.target, local-fs-pre.target, multi-user.target, network.target, nss-lookup.target, nss-user-lookup.target, paths.target, poweroff.target, printer.target, reboot.target, remote-fs.target, remote-fs-pre.target, remote-fs-setup.target, rescue.target, initrd-root-fs.target, rpcbind.target, runlevel2.target, runlevel3.target, runlevel4.target, runlevel5.target, shutdown.target, sigpwr.target, sleep.target, smartcard.target, sockets.target, sound.target, suspend.target, swap.target, sysinit.target, syslog.socket, system-update.target, time-sync.target, timers.target, umount.target A few units are treated specially by systemd. They have special internal semantics and cannot be renamed. basic.target A special target unit covering basic boot-up. systemd automatically adds dependencies of the types Requires= and After= for this target unit to all services (except for those with DefaultDependencies=no). Usually this should pull-in all mount points, swap devices, sockets, timers, and path units and other basic initialization necessary for general purpose daemons. bluetooth.target This target is started automatically as soon as a Bluetooth controller is plugged in or becomes available at boot. This may be used to pull in Bluetooth management daemons dynamically when Bluetooth hardware is found. ctrl-alt-del.target systemd starts this target whenever Control+Alt+Del is pressed on the console. Usually this should be aliased (symlinked) to reboot.target. cryptsetup.target A target that pulls in setup services for all encrypted block devices. dbus.service A special unit for the D-Bus bus daemon. As soon as this service is fully started up systemd will connect to it and register its service. dbus.socket A special unit for the D-Bus system bus socket. All units with Type=dbus automatically gain a dependency on this unit. default.target The default unit systemd starts at bootup. Usually this should be aliased (symlinked) to multi-user.target or graphical.target. The default unit systemd starts at bootup can be overridden with the systemd.unit= kernel command line option. display-manager.service The display manager service. Usually this should be aliased (symlinked) to gdm.service or a similar display manager service. emergency.target A special target unit that starts an emergency shell on the main console. This unit is supposed to be used with the kernel command line option systemd.unit= and has otherwise little use. final.target A special target unit that is used during the shutdown logic and may be used to pull in late services after all normal services are already terminated and all mounts unmounted. getty.target A special target unit that pulls in statically configured local TTY getty instances. graphical.target A special target unit for setting up a graphical login screen. This pulls in multi-user.target. Units that are needed for graphical logins shall add Wants= dependencies for their unit to this unit (or multi-user.target) during installation. This is best configured via WantedBy=graphical.target in the unit's [Install] section. hibernate.target A special target unit for hibernating the system. This pulls in sleep.target. hybrid-sleep.target A special target unit for hibernating and suspending the system at the same time. This pulls in sleep.target. halt.target A special target unit for shutting down and halting the system. Note that this target is distinct from poweroff.target in that it generally really just halts the system rather than powering it down. Applications wanting to halt the system should start this unit. initrd-fs.target systemd-fstab-generator3 automatically adds dependencies of type Before= to sysroot-usr.mount and all mount points fround in /etc/fstab that have the auto and x-initrd.mount mount options set. kbrequest.target systemd starts this target whenever Alt+ArrowUp is pressed on the console. This is a good candidate to be aliased (symlinked) to rescue.target. kexec.target A special target unit for shutting down and rebooting the system via kexec. Applications wanting to reboot the system with kexec should start this unit. local-fs.target systemd-fstab-generator3 automatically adds dependencies of type Before= to all mount units that refer to local mount points for this target unit. In addition, it adds dependencies of type Wants= to this target unit for those mounts listed in /etc/fstab that have the auto mount option set. local-fs-pre.target This target unit is automatically ordered before all local mount points marked with auto (see above). It can be used to execute certain units before all local mounts. multi-user.target A special target unit for setting up a multi-user system (non-graphical). This is pulled in by graphical.target. Units that are needed for a multi-user system shall add Wants= dependencies for their unit to this unit during installation. This is best configured via WantedBy=multi-uer.target in the unit's [Install] section. network.target systemd automatically adds dependencies of type After= for this target unit to all SysV init script service units with an LSB header referring to the $network facility. This unit is supposed to indicate when the network is "up", but it is only very loosely defined what that is supposed to mean. Also see Running Services After the Network is up for more information. nss-lookup.target A target that should be used as synchronization point for all host/network name service lookups. Note that this is independent of user/group name lookups for which nss-user-lookup.target should be used. systemd automatically adds dependencies of type After= for this target unit to all SysV init script service units with an LSB header referring to the $named facility. nss-user-lookup.target A target that should be used as synchronization point for all user/group name service lookups. Note that this is independent of host/network name lookups for which nss-lookup.target should be used. paths.target A special target unit that sets up all path units (see systemd.path5 for details) that shall be active after boot. It is recommended that path units installed by applications get pulled in via Wants= dependencies from this unit. This is best configured via a WantedBy=paths.target in the path unit's [Install] section. poweroff.target A special target unit for shutting down and powering off the system. Applications wanting to power off the system should start this unit. runlevel0.target is an alias for this target unit, for compatibility with SysV. printer.target This target is started automatically as soon as a printer is plugged in or becomes available at boot. This may be used to pull in printer management daemons dynamically when printer hardware is found. reboot.target A special target unit for shutting down and rebooting the system. Applications wanting to reboot the system should start this unit. runlevel6.target is an alias for this target unit, for compatibility with SysV. remote-fs.target Similar to local-fs.target, but for remote mount points. systemd automatically adds dependencies of type After= for this target unit to all SysV init script service units with an LSB header referring to the $remote_fs facility. remote-fs-pre.target This target unit is automatically ordered before all remote mount point units (see above). It can be used to run certain units before the remote mounts are established. Note that this unit is generally not part of the initial transaction, unless the unit that wants to be ordered before all remote mounts pulls it in via a Wants= type dependency. If the unit wants to be pulled in by the first remote mount showing up it should use remote-fs-setup.target (see below). Again, this target unit is not suitable for pulling in other units, it is only useful for ordering. remote-fs-setup.target This target unit is automatically pulled in (by a Wants= type dependency) by all remote mount points. It can be used to run certain units when at least one remote file system is to be mounted. Note that this target is not ordered against the remote mounts, use remote-fs-pre.target for that. Again, this target unit is not suitable for ordering, it is only useful for pulling in other units. rescue.target A special target unit for setting up the base system and a rescue shell. runlevel1.target is an alias for this target unit, for compatibility with SysV. initrd-root-fs.target systemd-fstab-generator3 automatically adds dependencies of type Before= to the sysroot.mount unit, which is generated from the kernel command line. rpcbind.target systemd automatically adds dependencies of type After= for this target unit to all SysV init script service units with an LSB header referring to the $portmap facility. runlevel2.target runlevel3.target runlevel4.target runlevel5.target These are targets that are called whenever the SysV compatibility code asks for runlevel 2, 3, 4, 5, respectively. It is a good idea to make this an alias for (i.e. symlink to) multi-user.target (for runlevel 2) or graphical.target (the others). shutdown.target A special target unit that terminates the services on system shutdown. Services that shall be terminated on system shutdown shall add Conflicts= dependencies to this unit for their service unit, which is implicitly done when DefaultDependencies=yes is set (the default). sigpwr.target A special target that is started when systemd receives the SIGPWR process signal, which is normally sent by the kernel or UPS daemons when power fails. sleep.target A special target unit that is pulled in by suspend.target, hibernate.target and hybrid-sleep.target and may be used to hook units into the sleep state logic. smartcard.target This target is started automatically as soon as a smartcard controller is plugged in or becomes available at boot. This may be used to pull in printer management daemons dynamically when smartcard hardware is found. sockets.target A special target unit that sets up all socket units.(see systemd.socket5 for details) that shall be active after boot. Services that can be socket-activated shall add Wants= dependencies to this unit for their socket unit during installation. This is best configured via a WantedBy=sockets.target in the socket unit's [Install] section. sound.target This target is started automatically as soon as a sound card is plugged in or becomes available at boot. This may be used to pull in audio management daemons dynamically when printer hardware is found. suspend.target A special target unit for suspending the system. This pulls in sleep.target. swap.target Similar to local-fs.target, but for swap partitions and swap files. sysinit.target A special target unit covering early boot-up scripts. syslog.socket The socket unit syslog implementations should listen on. All userspace log messages will be made available on this socket. For more information about syslog integration, please consult the Syslog Interface document. system-update.target A special target unit that is used for off-line system updates. systemd-system-update-generator8 will redirect the boot process to this target if /system-update exists. For more information see the System Updates Specification. time-sync.target systemd automatically adds dependencies of type After= for this target unit to all SysV init script service units with an LSB header referring to the $time facility. timers.target A special target unit that sets up all timer units (see systemd.timer5 for details) that shall be active after boot. It is recommended that timer units installed by applications get pulled in via Wants= dependencies from this unit. This is best configured via WantedBy=timers.target in the timer unit's [Install] section. umount.target A special target unit that umounts all mount and automount points on system shutdown. Mounts that shall be unmounted on system shutdown shall add Conflicts dependencies to this unit for their mount unit, which is implicitly done when DefaultDependencies=yes is set (the default). When systemd runs as a user instance, the following special units are available, which have similar definitions as their system counterparts: default.target, shutdown.target, sockets.target In addition the following special unit is understood only when systemd runs as service instance: exit.target A special service unit for shutting down the user service manager. Applications wanting to terminate the user service manager should start this unit. If systemd receives SIGTERM or SIGINT when running as user service daemon it will start this unit. Normally, this pulls in shutdown.target which in turn should be conflicted by all units that want to be shut down on user service manager exit. systemd1, systemd.unit5, systemd.service5, systemd.socket5, systemd.target5, bootup7, systemd-fstab-generator8